The AIA Migration error codes

Hello

Have a question related to the migration of the error codes of the AIA we configure AIA for each Service AIA/ABC framework.

These stored anywhere as an xml or in the database? Our main concern is during the migration, we face the challenge to set all this up in a new environment. Rather, I'm looking for, if we can just move the configuration file to the new environment.

Thanks in advance,

Phani

Phani,
I guess that you are referring to the configuration of error notifications in the AIA configuration pages. These rules are stored in the BSR_ERROR_NOTIFICATIONS table in the schema of the AIA.

If you export data from an env to be imported into another, you must ensure that the corresponding sequence of the DB (BSR_ERROR_NOTIFICATIONS_S) is adjusted to not run into issues.

Gerhard

Tags: Fusion Middleware

Similar Questions

  • Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers. Help!

    Receive the "403 Forbidden" error code on a Web site, I've been accessing years. It is written "forbidden you don't have permission to access the/_cqr/login on that server." I can access this site (AOL) on other browsers.

    I emptied my cache.  I rebooted Firefox.  This is my email website - never had a problem before.  I am able to access it on Safari.  I even tried the simple address (rather then my bookmarked login address) - still got the same error message!
    

    I have the same problem: it is written ' forbidden you don't have permission to access the/_cqr/login on that server. " I can access this site (AOL) on other browsers. After that I connected to AOL, I get this message. then I go to the address line and delete everything after than the aol.com and her and then press ENTER. then, I'm registered and can read my emails. How can we solve this problem?

  • My camera so far not this problem and all of a sudden I saw this error in various parts of the phone and ask you to consider the problem of error code 1009

    My camera so far not this problem and all of a sudden I saw this error in various parts of the phone and ask you to consider the problem of error code 1009

    Apple ID: *.

    Did you check out this article? Seems to be linked to the AppStore and the country where you're:

    Why my iphon give me error code 1009?

  • The 'cluster of error code.vi error' will be based on the RT 'Dialogue & User Interface' work as expected in a RT application palette?

    The 'cluster of error code.vi error' is available to be included in an application of the RT, but it contains a 'FP. Node Title property"VI and a RT application contains all of the panels before, except when running in debug mode. This vi.lib VI will work properly in an application of the RT running on a cRIO?

    The Cluster error error Code VI works fine on the objectives of the RT, but the behavior is slightly different when the appellant VI has a front title which differs by its qualified name.  Note that there is a selection function that checks the mistakes coming out of the public Service. Node title.  If there is no title of façade, then simply will use name of the VI instead, so this VI certainly works on RT.

    Keep in mind that opening a VI reference and a property of reading is relatively a lot of time, so there is a significant performance impact when you call this VI on RT.  This attention to performance has been reported to R & D in 384767 car, but it can usually be avoided by ensuring to call only this VI when there is an error that must be reported to the user.

    Chris M

  • Can't do the microsoft update error code 0 x 80090305

    Running XP Pro SP3 - cannot do the Microsoft Update error code 0 x 80090305

    0 X 80090305 SEC_E_SECPKG_NOT_FOUND

    I suggest you follow the steps in the link below and check if it will help:

    http://support.Microsoft.com/kb/836941/en-us >

  • Running Windows Vista 32 bit: get the "Windows Update_00000646" error code "Windows Udate_dt000".

    For the following updates: KB982308 KB979441, KB982158, KB982135, KB982312, & KB982331

    This has been posted on 6/08...tried manual installation and that no longer works.  Help, please!

    Hi... when I tried the link to error code 646 and tried to change the registry for AppData, I received an error message as follows: "changing error value: error writing the contents of the value."  I copied the percharacter as suggested, but it would not allow me to change it.

  • Getting errors on the 3 Windows updates: 2699988, 270162, 2685939. On the first try error codes were 0 x 80246007 and 0x8007010B

    Getting errors on the 3 Windows updates: 2699988, 270162, 2685939.  On the first try error codes have been 0 x 80246007 for all 3, try subsequent was 0x8007010B.

    Configuration is Windows XP SP3 with MSIE6 (test the system reads old browser).  Any suggestions?

    Original title: get errors on the 3 Windows updates

    Maybe: http://support.microsoft.com/kb/958042

    When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site, you may receive a "0 x 80246007" error code

  • The gatherer is unable to read the registry 0 error code 800700002 x. What does that mean?

    The gatherer is unable to read the registry 0 error code 800700002 x. What does that mean?  Slow performance are now a big problem.  Natural remedies do not work

    Hello

    I suggest you perform a clean boot in order to check whether a third-party program is causing the problem.

    See this article for more information on the clean boot:


    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353  

  • WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

    IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

    Hi JRCLNSIN100,

     

    Welcome to Microsoft Answers Forums.

    We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

    ·         What is the disk you use to reinstall?

    ·         Is this a recovery or reinstalling the disc you are using?

    ·         When exactly do you get this error message?

    ·         What is the edition of Windows Vista, you try to install?

    ·         How old is the drive that you are using?

    ·         How are you starting the installation process?

    After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

    First check if you have scratches or dust on the disc and clean the surface and try again.

    To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

    To perform a flat installation of Windows Vista, follow these steps.

    Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

    http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

    1. Insert the Windows Vista installation disc.
    2. Start Windows Explorer.
    3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
    4. On the Edit menu, click select all.
    5. On the Edit menu, click copy.
    6. Click to select the hard disk you want to contain the flat installation files.
    7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
    8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
    9. Double-click Setup.exe, and then follow the instructions that appear.

    See the link below for more information on flat installation.

    How to perform a flat installation of Windows Vista

    http://support.Microsoft.com/kb/928902

    This problem can also occur if the firmware of the DVD drive is defective or obsolete.

    If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

    For more information please visit the link below.

    Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

    http://support.Microsoft.com/kb/930984

    Hope this information is useful.

    Let me know if it worked.

    All the best!

    Thanks and greetings

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot install the KB3104002 80071A2D error Code

    I'm going to get in trouble and cannot install the KB3104002 80071A2D error Code, Lenovo ThinkCentre Windows 7 Pro 64-bit hardware.

    I ran Windows update convenience store that did not help the results of execution:

    Windows Update error 0 x 80070057(2015-12-14-T-09_56_48A) NO FIXED

    Registration for the service is missing or damaged FIXED

    Problems to install the latest updates FIXED

    Problems to install the latest updates FIXED

    I downloaded and tried to run with the Windows Update Catalog, this did not help. I have set up the computer to run in a clean boot state and tried to install this did not help.

    Any thoughts suggestions help.

    Thank you

    Doug

    After masking the update sought KB3104002 updates and it found an another KB3100773 same as KB3104002 *. IE 11 updates and it failed. Ran SFC/scannow received the following Windows resource protection could not perform the requested operation. Run chkdsk/r, recovering orphaned files. Once finish if it corrects any mistakes, I'll try updates once more, otherwise I will update the PC.

    A ran SFC/scannow results: verification completed 100%. Windows resource protection could not perform the requested operation.  Run chkdsk /r to check the disk for errors and repair

    After performing the chkdsk/r install all updates especially the KB3100773 and the KB3104002 have to do with the Cumulative security for IE 11 updates

  • Backup of Windows 7 - the system cannot find the specified path, error Code 0 x 80070003

    I have serious problems back up my own machine to a share on our FILE SERVER as \\FILE-SERVER\Backup\

    I have already backed up another PC using exactly the same settings I used on my PC successfully.  So I guess it's nothing to do with the FILE SERVER or the backup settings.  There must be something to do with what I'm trying to backup of my machine.

    First, some background.  This exercise was started when Windows Server 2008 r2 o/s fell one of our servers.  I tried to reinstall the operating system several times, without success.  In the end, I caught another drive and rebuilt the o/s on the server.  Then I got in trouble by promoting to a domain on the network controller.  In the end, I've renamed server FILE Server for FILE SERVERS.

    We share regularly four records on what is now the FILE SERVER:

    \\FILE-SERVER\Backup - a folder where the backups of all other devices are written, so that they will be saved with the server

    \\FILE-SERVER\Company - contains all of the data of our company

    \\FILE-SERVER\GEM - this is for our own database application

    \\FILE-SERVER\Install - contains all the installation files for the software we use

    These are all inmates on a RAID 1 array that is separate from the system drive that covered.

    On my laptop, I had made these "Available offline" shared folders, while I still had everything that is available to me when I was away from the office.  They were of course shared under \\FILESERVER\... not \\FILE-SERVER\... Before the server down, I had backup works fine on my machine.

    After having got the server up and going again, I started going there from the WIndows 7 Client PC backups again.  I started with a desktop computer, which of course have not all offline files.  This turned out to be relatively simple.

    Then, I started with my machine.  Initially I did not 'Available offline' folders shared meanings.  I created my backup using exactly the same settings that had worked OK on the desktop.  But when I ran the backup I got:

    The system cannot find the specified path, error Code 0 x 80070003

    I tried all sorts of things to make it work:

    • with or without an image of the system.
    • reducing the backup in a single folder.
    • do it again 'available offline files

    Nothing makes no difference.  In the end, I looked in the Sync Center to look at the offline files folder.  Under mapped network drives I discovered that I still had the files and folders in \\FILESERVER.  In their Menu Popup 'Always available offline' is grayed out.  So I deleted the Copies offline.  This delete the files in the folders but not files.

    Since I could find no way to delete the old mapped network drives.  I decided that I had painted myself into a corner.  So I bit the bullet and re-installed my laptop too.  This will get rid of the unwanted old mapped network drives - BUT NOT the ERROR!

    HELP - I'm running out of ideas!

    I have a WORD Document that all the settings that I used on the server and Clients, as well as the reasoning behind these settings, documents, but I can't find a way to download.

    Hi Brian,.

    These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point.
    Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive. For example, a reparse point would a folder such as C:\DVD to point to drive E, the real DVD player.

    Perform the steps from the link below and see if the backup works.

    Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

    If you work with Windows Server 2008 and the mapped drives, I would recommend that you post the question in the TechNet forums.

    http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

    I hope that using information provided!

  • Receive the KB 953691 error code when loading LifeCam 3.0

    Original title: kb/953691

    Dumm it down to a classified noncomputor like me, how or what I do to work around the kb/953691 error code when loading LifeCam 3.0? My LifeCam 1.2 has not had a problem with Vista, but does now with Windows 7.

    Thanks for any direction, wish MSM would take a direct responsibility with a patch rather than a group of form... Richard

    p.s., xxxx always Vista and Windows 7 on XP, could have been better with a Mac laptop and my XP PC on Vista/Win7 laptop!

    Hi Richard,

    You can try the following steps and check if it helps.

    Step 1:

    Reset the permissions for the folder to full access:

    a. Click Start, click Run, type Explorer.exe and then click OK.

    b. expand computer.

    > Locate the C:\Documents and Settings\folder \My Documents\LifeCam

    > Locate the C:\Users\folder \Pictures\LifeCam

    c. right click on the folder and then click Properties.

    d. on the Security tab, click Administrators, click full control under allow and then click on apply.

    e. on the Security tab, click System, click full control under allow and then click on apply.

    f. on the Security tab, click everyone, click on remove and then click OK.

    Step 2:

    Configure the firewall settings to allow LifeCam.exe:

    To examine and configure your firewall settings, follow these steps:

    a. Click Start, click Run, type wscui.cpl and then click OK.

    b. in the Windows Security Center, click Windows Firewall.

    c. the Exceptions tab to add program and port exceptions to allow certain types of inbound traffic. You can define a scope for each exception.

    d. Select LifeCam.exe and add it to the list of Exceptions.

    e. If you are using another firewall, check the manual to configure the firewall to add LifeCam.exe to the list of exceptions.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Window 7 unsuccessful backup, error message "the system cannot find the specific file" error code: 0 x 80070002.

    I tried to back up my desktop using Windows 7 upwards, but he is not successful, he stopped, message error "the system cannot find the specific file" error code: 0 x 80070002.  He said no specific file that causes the problem.

    Also, my Seagate FreeAgent, I back upwards of C: from my old PC that runs under Windows XP, which causes conflicts of the OS?  Enjoy diagnose and advise!

    Hello

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    I suggest you follow the steps in the link below and check off the question:

    0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7:

    http://support.Microsoft.com/kb/979281

    I hope that the information above helps you.

  • Windows 8 upgrade retains fault make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D

    Hello

    Like so many others, I am fighting to get 8 upgraded windows. I have tried all the methods mentioned upgrade

    on the forums without success. I have greated iso dvd, tried to use the USB and the installation of office.

    Error: Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]

    The error logs:

    Setupact.txt

    2012-11-04 01:02:27, MoveOldOSFiles IBS Info [0x0600a6]: got through [C:\Windows\] to [C:\Windows.old\Windows\]
    2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEArchiveOldWindowsFoldersDoneCheckpoint") current...
    2012-11-04 01:02:27, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEArchiveOldWindowsFoldersDoneCheckpoint' have been correctly set up.
    2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEImageApplyReadyCheckpoint") current...
    2012-11-04 01:02:28, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEImageApplyReadyCheckpoint' have been correctly set up.
    2012-11-04 01:02:28, info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
    2012-11-04 01:02:28, info [0x0606cc] IBS calling WIMApplyImage (flags = 0 x 180)...
    2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
    2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
    2012-11-04 01:08:37, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the file [C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys] RULE is [605]
    2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
    2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
    2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
    2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
    2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
    2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]
    2012-11-04 01:08:42, PublishCriticalError IBSLIB Info: publish error message critical [Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
    2012-11-04 01:08:42, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
    2012-11-04 01:08:42, info UI entering Page Cancel.

    Setuperr.txt

    2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
    2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
    2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
    2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]

    Any help will be greatly appreciated.

    Thank you for all the answers. Finally managed to get installed it. Download 4 times. Whenever he stopped at different percentages, so I expected the download is corrupt. Finally in the format of my other readers, installed windows 7 on it and then downloaded windows 8. Finally, it worked. Had to be something with my player.

    Thanks again.
  • Setup could not access a critical file. Please retry the installation. Error code: 49

    Despite several attempts I still got the message:

    Setup could not access a critical file. Please retry the installation. Error code: 49

    Thanks for your help

    If os win, right click on the Setup file and click "Run as Administrator".

Maybe you are looking for

  • Move the apps into folders with the new IOS

    I installed the latest IOS update on my iPhone 6s and I can't organize my apps in folders more. The old method after pressing applications until it stirs seems not longer apply. When I want the app for a x-amount of time it gives me the option to 'sh

  • Add the Manager does not load in FF11 - just says "Loading" for hours

    With the help of FF11 on Win 7, the add-in Manager simply says loading forever. I'm unable to access my own addons to activate / deactivate them as appropriateI have tried:(1) by clicking Extensions, Plugins, appearance, then return to add on(2) star

  • Move photos to smaller hard drive

    I have my library of photos on an external hard drive. It takes about 140,84 GB of space on that hard drive. I want to move it to my 128GB SD micro card. I understand that the 140 GB is longer than 128 GB, so the default answer is "which does not wor

  • Drop problems

    A few weeks ago, I could easily transfer files from my iPod touch 5 to my MacBook Pro (mid-2012) very well. Lately, my iPod or my iPad Air is able to see my MacBook, but my MacBook is able to see the other mobile device very well. My Mac mini doesn't

  • Driver Serial Port PCI - DC7800P SFF

    Hello I was wondering if someone could help me with a recommended driver for PCI Serial Port, for a computer HP DC7800P SFF '10 64-bit Windows' The device ID is: PCI\VEN_8086 & DEV_29B7 & SUBSYS_2818103C & REV_02PCI\VEN_8086 & DEV_29B7 & SUBSYS_28181