The amendments are not expected to be replaced by "restore database; recover the database; » ?

Emails sent via Thunderbird are not saved on the e-mail server.

I have a critical problem with the backup of the emails I sent to Thunderbird.

The application works very well, that everyone sent mail is correctly saved in the folder "sent" located in the e-mail account of TB.
The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com), so whenever I have to reinstall the software, I lose all my outgoing emails. If I access my email on yahoo.com account and email from there, it is regularly saved in the sent folder there.

I would be grateful if someone could
(i) say me if it is a known problem, and if there is a way to remedy through Thunberdird server or Composition settings.
(ii) if there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive. Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder? And I want to save the "Sent.msf" file as well?

Thank you much for the help.
L

The problem is that messages are not saved on the mail server associated with (in this case, pop.mail.yahoo.com),.

With a POP account, this is the expected behavior. Only the Inbox folder is visible on the server, all the other files are the.
https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_pop

To access the other folders on the server, for example your sent folder, you need to configure your account as an IMAP account.
https://support.Mozilla.org/en-us/KB/glossary-terms-including-types-accounts#w_imap

so whenever I have to reinstall the software, I lose all my outgoing emails.

You should not need to reinstall the software in the first place. And even if you do you will not lose any position, unless you deliberately remove your Thunderbird profile.
With pop, all mail is local to your computer, including the "sent" folder.
http://KB.mozillazine.org/Profile_folder_-_Thunderbird

If there is a way around the problem by saving the file 'sent' located in the Thunderbird mail folder on my HARD drive.

In fact, you must back up the entire profile.
_ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

Is it possible, after the reinstallation of the application, to paste the file sent to the Mail folder?

As said before, nothing is lost when reinstalling the application. If you want to move to a new computer by simply moving the profile.
http://KB.mozillazine.org/Move_to_a_new_PC

do I have to save the "Sent.msf" file as well?

If you want to backup files individual mail, you don't need to save the *.msf files. They are just the index files and contain no mail. They are rebuild automatically when you start Thunderbird.
In any case, to save the entire profile is the recommended method.

Old favorites are not compatible with the version 20 + Firefox

General information:
I use the old client version 3.6 given that an old utility addon author stopped update and will not work with the new revisions. Despite disabling the update featured on: config and in preferences, the browser refreshes still finished (initially I was using 3.4 and would prefer to use that, but no matter how I try I can is no longer cancel 3.6 to 3.4 even if I reinstall using an Installer 3.4). Accordingly, I had the habit of keeping a copy of my directory of firefox where it updates again without asking, she has. This could help the guy out to meet countless people who have lost their favorites because of the upgrade released this year and I hope that someone to investigate and release a patch/utility to fix the problem.

Question:
I checked that the most recent customer since at least version 20 and leave, are not compatible with the old bookmark JSON files. Those who have been upgraded to the latest revision not only lose their favorites, but cannot restore them either, as Firefox only returns the error message: "unable to process the Backup File.

I confirmed that the files themselves are perfectly intact with no sign of corruption and are as expected. Restore ok old revisions of browser (in my case specifically 3.6), they will not restore the most recent customer reviews. This isn't a fault with bookmark backups, but with new clients (I guess they changed the way they store information in the JSONs at some point. I note in the code for the JSONs GUID has never been used in old revisions, but it is in the most recent revision. Maybe it's causing an incompatibility problem? You just need to adjust the client so that it looks for the GUID and if none can be found to ignore it rather than decide that the file is corrupted.

Old JSON Code snippet: {"title":"","id":1,"dateAdded":1306666129870000,"lastModified":1306670152435000,"type":"text/x-moz-place-container","root":"placesRoot","children":[{"title":"Bookmarks Menu","id":2,"parent":1,"dateAdded":1306666129870000,"lastModified":1381254048121000,"type":"text/x-moz-place-container","root":"bookmarksMenuFolder","children":[{"title":"Recently Bookmarked","id":6,"parent":2,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"mimeType":null,"type":3,"value":"RecentlyBookmarked"}],"type":"text/x-moz-place","uri":"place:folder=BOOKMARKS_MENU&folder=UNFILED_BOOKMARKS&folder=TOOLBAR&sort=12&excludeQueries=1&excludeItemIfParentHasAnnotation=livemark%2FfeedURI& maxResults = 10 & queryType = 1 "}, {'index': 1,"title":"Recent Tags", 'id': 7, 'parent': 2,"annos": [{'name':" places/SmartBookmark', 'flags': 0, 'expires': 4, 'mimeType': null, 'type': 3, 'value': 'RecentTags'}], 'type': ' text/x-moz-place', 'uri' ":" place: sort = 14 & type = 6 & maxResults = 10 & queryType = 1 ""}, {'index': 2, 'title': id '',' ': 8, 'parent': 2, 'dateAdded': 1294868015246000, 'lastModified': 1294868015246000, 'type': "text/x-moz-place-separator"}

New JSON Code Snippet: {"title":"","guid":"5rkFafJ6AnRZ","id":1,"index":0,"dateAdded":1396387525168000,"lastModified":1396387525168000,"type":"text/x-moz-place-container","root":"placesRoot","children":[{"title":"Bookmarks Menu","guid":"m7vLM41-lzQi","id":2,"index":0,"parent":1,"dateAdded":1396387525168000,"lastModified":1396387526173000,"type":"text/x-moz-place-container","root":"bookmarksMenuFolder","children":[{"title":"Recently Bookmarked","guid":"BEffyw6xva93","id":13,"index":0,"parent":2,"dateAdded":1396387526172000,"lastModified":1396387526172000,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4 ,"value":"RecentlyBookmarked"}],"type":"text/x-moz-place","uri":"place:folder=BOOKMARKS_MENU&folder=UNFILED_BOOKMARKS&folder=TOOLBAR&queryType=1&sort=12&maxResults=10&excludeQueries=1"},{"title":"Recent Tags","guid":"WmnlbVv38Bjv","id":14,"index":1,"parent":2,"dateAdded":1396387526172000,"lastModified":1396387526172000,"annos":[{"name":"Places/SmartBookmark","flags":0,"expires":4,"value":"RecentTags"}],"type":"text/x-moz-place","uri":"place:type=6&sort=14&maxResults=10"}

Solution?
In my case, I had a copy backup of the old directory for review. To restore I opened the copy and export bookmarks as an HTML, that I restored in the most recent client. If you don't have a copy of the former client, the best thing would be to try and re-install an older revision of the customer and either make a copy of the program folder and use another copy of that you can use the new and old customers and you worry about the loss of an older revision, since you'll always have 2 copies of the former client (the one you use the one that you use to restore in the case of at level). Or export bookmarks to an HTML element, and then upgrade the client to the newest and import the HTML instead of JSON files.

Please review and create a more simple solution to a problem of stupid incompatibility. ^_^

There are a number of operations in the file places.sqlite which are obsolete.
For example,.

setItemGUID (aItemId, aGUID) obsolete since Gecko 14.0 - returns a unique global identifier for the element. This is mainly for use by extensions that synchronize data between different profiles bookmark.



Former id snippit:
"title": "','id': 1,"dateAdded": 1306666129870000,"
New snippit
{"title": "","guid": "5rkFafJ6AnRZ",""id ": 1, 'index': 0, 'dateAdded': 1396387525168000"}

There are other identifier here has changed, I think in version 14
«Note: the importHTMLFromFileToFolder() method has been removed in Gecko 14.0 (14.0 Firefox / Thunderbird 14.0 / SeaMonkey 2.11).»

But more likely the former is Netscape format: http://msdn.microsoft.com/en-us/libra.../aa753582%28VS.85%29.aspx

I tried this however: I installed the old version (3.5) and updated to the current version. All my favorites were there. I had to check the updates and could not skip certain steps of 3.5 to 3.6 for example. He then went from 3.6 to 12, then with todays update went straight to 30. They're all here. However nothing is perfect, backup is recommended as well.

Back to your question, makes it easier for backward compatibility, my hypothesis is that they changed with the updates and ignored some versions. Saved profiles or places.sqlite files may be missing this change because the format changes in the update?

My suggestion would be filing a bug at this request, providing a few cases where this would be necessary. Currently only the current version of Firefox is supported, which can leave us to the work around that you are currently using.

Reference documentation for the developer of the places :

Why the proxy settings are not respected

I set up SSH as a proxy server on my laptop when I'm on a public network and configure Firefox to use the proxy by completing the manual Proxy config.

If SSH doesn't work, I get this error message as expected: "the proxy server refuses connections" when I try to access any website EXCEPT Google.

Searches on Google and access Google.com still works, even when the proxy server is not up. That seems broken.

When the proxy server IS up, Google searches do not appear to use it.

Google is my default search provider. If I try to access Bing, Firefox is behaving as expected (no access when proxy is out, throw up debugging indicating new connections when the proxy is up). If I change from Bing to be default search provider, the behavior of the two remains the same (proxy will use Bing, Google does not work).

Why access to Google (and only Google?) ignore the proxy settings? Are there other sites of 'magic' that would also ignore the proxy? I use the proxy because I want to protect my internet traffic when I'm on public networks, if Firefox can randomly ignore them for some sites but not others, how can I trust him?

My configuration problem. I realized that any site that uses https worked, while others are not.

Somehow the "use this proxy server for all protocols" got unchecked. Audit, it solves the problem.

all the old ver of ff available now have ver4 (cookies are not config. default is to accept all cookies.)

all currently available versions (past worm to 3.5 all have true cookies as default.) This is not how the prog managed cookies when it first came out. I use win7 and ff v3.6.16 and allows to control cookies (1st or 3rd party group). This is no longer true. When d/l past FF worm. All have been replaced by accept all cookies as ver4. I d/l v3.6.16, v3.6.13, v3.5.19 and all are the same. Why say we can go back to the old worm for a short period when they are NOT the old worm, at least not as much as the cookies are involved. Used revo uninstaller after each installation to clean the machine completely before trying another worm. Thanks Bob...

I see no difference in the options of cookie for 3.6 and 4.0. There could be some differences from scratch rather than upgrade.

---

The second screenshot starts a new profile.

HDD and dvd are not recognized in the configuration menu, what could be the problem?

The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

dhobs,

Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

to change my earpiece and charger with the new, but they are not defective can I use guarantee of my iPhone to exchange them then?

I bought my iPhone almost a year ago and he still has warranty valid

If I want to get new headphones and charger but they are not otherwise defective

so is it possible that I get new ones even if they are not defective?

N ° guarantee replaces the defective do not part to which you have become dissatisfied.

ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

Hello!

After the end of my second day of test error, I put this question on the table:

I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

I confirmed that:

the RowData sizes and the ChannelNames are equal,

both spend the isarray = true test,

I change the order of the ChannelNames,.

I have reconnected/disconnected from the oConnexion every time, nothing has changed.

Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

Call OpenSQLConnection
Set oRecordset = CreateObject ("ADODB. Recordset')
Call SelectWell
Call GetWellStateIDs

Data.Root.Clear
for j = 0 to ubound(oTables,1)

sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
oRecordset.Open sSQLSting, oConnexion
Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
for i = 0 to orecordset. Fields.Count - 1
oFieldNames (i) = orecordset. Fields.Item (i) .name
next
oArray = oRecordset.GetRows (-1, 0, oFieldNames)
Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

oArray, oFieldNames arraytochannels
oRecordset.close
oConnection.Close
next

Sub GetWellStateIDs
sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
oRecordset.Open sSQLSting, oConnexion
oArray = oRecordset.GetRows)
WellStateIDFirst = oArray (0,0)
WellStateIDLast = oArray (0, ubound(oArray,2))
oRecordset.close
EndSub

Sub OpenSQLConnection
Set WshNetwork = CreateObject
oComputerName = WshNetwork.ComputerName
oDB = "MX2. Player.DB ".
Set oConnexion = CreateObject ("ADODB. Connection")
oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
oProvider = oProvider & oDB
oConnection.ConnectionString = oProvider
oConnection.Open
EndSub

Another clue. If you check using DIAdem

Microsoft Windows Script Debugger

you are able to install the debugger in DIAdem.

It would potentially have shown that the command does not work as expected.

Sorry for the inconveniance

Andreas

Put option on the page does not work in the Easy Print VI Panel, controls tabs are not displayed

Found two problems with the screw of report generation:

(1) in the Panel of VI feel easy (report generation) or the Documentation.vi, the layout options don't work (dug in the sub - VI and found that they are not connected to anything).

(2) If you have the controls or the lights in a tab control and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they do not appear. The only indications/commands that appear are those that are displayed on all tabs (that is to say, to create a control and move it over the tab control so that it appears on every page).  There's a Subvi (Expand_control_ref_with_nested_controls.vi) which is called to handle the nested controls (IE, grapes, berries, etc...), but it should have a case to handle the controls tab.

Hey Sajosie,

Dig into the Sub - VI you are right in saying that the Options available to the user input is not connected to anything for most cases. However, in the case of failure to "Quick Print" Layout Options are used to change the layout of the report. In help for this VI, he mentions that this entry is ignored for the report "Standard reports" and "HTML" options However, it does mention that this ignorance of Layout Options is expected for the 'word' or 'Excel' reports.

Especially regarding the controls and indicators in the report which appear on the tab controls, I can make a product suggestion to do this kind of design more compatible with the mere impression VI Panel façade or Documentation.

Why files are not deleted in research appearing in the trash?

I went to search - files/folders. JPG - and there were 6,000 points---(mon fils m'a dit de vérifier là)

-When I play OKBridge - all the people on the bridge were there---(j'ai laissé un message OK à ce sujet)

I used shift - delete to delete them all, but they are not in the trash - please help - KC222

SHIFT + delete deletes the files selected without moving them to the trash. You will need to use data recovery software to recover these files.

When a file is deleted in this way, it is actually marked as unused space on your hard drive. Windows can replace the files during normal use, making them unrecoverable. It is therefore important to use your computer as little as possible until what they are retrieved. There are several data recovery on the strong programs - do a search on the web for them.

Finally a tip for the future, if all the data are important to support you.

The analyses are not in line. OfficeJet 8500 has more

My OfficeJet 8500 has more analysis not evenly.  The upper left area is darker than the rest of the document.  A way to fix this?

If you have performed all troubleshooting, including the cleaning of the surface of glass scanner, then I would say you are right in your assessment of the defect.  How long have you had the replacement product?

However, I have one last thing, I would like for you to try.  I have the steps for to do you a factory reset on the printer.  I'll send them to you via private message.  Please check your Inbox for messages in the forum.  Before you perform these steps, please read Bob_Headrick wire on the printer reset, found here.

If the product is still under warranty, then I suggest call HP for Technical Support on this device.  If you are in the USA / Canada, then the number to dial is 1-800-474-6836.  If you are not in this area, please click here to access the global contact list for HP Technical Support.

I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

Hi subhshy001,

Welcome to the Microsoft Windows answers Forum community!

Try this if you do not have

Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

If you have completed the steps and was not even useful,

Follow these steps:

Try to create a shortcut and sending it on the desktop.

(1) open: Start Menu ,.
(2) right-click: Internet Explorer icon .
(3) select: send to > desktop (create shortcut).

There should be a shortcut on the desktop .

Make sure that the "show desktop icon" has a check against it

OR

Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

If the steps above do not work then:

You can scan your computer for malware.

You can download, install and update anti-malware free of your favorite search engine and find malware.

Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

Hope this information helped!

Thank you, and in what concerns:

Aziz Nadeem - Microsoft technical support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.