the analysis?

Similar Questions

• HP 4620: HP 4620 scans very well, but could not save the analysis in a file

  The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

  Hey @motikama,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Uninstall all software associated with the printer to your computer.
  2. Restart your PC.
  3. Download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• is it the analysis feature on the hpf4480 able to display on the screen, so I can send the document?

  Is can someone please tell me if the analysis on my hp deskjet f4480 feature can send the document to only scan to the computer screen so I can then send it?

  Hello

  Yes, all scanners for this. It's from the #27 manual page:

  Scanning to a computer.
  ▲ Proceed as follows:
  Scan of the single page
  a. original charge.
  & #31; Lift the cover on the product.
  & #31; Load the originals face to print down on the corner before right to glass.
  & #31; Close the cover.
  b. start the analysis.
  & #31; Press Scan.
  c. Preview and accept.
  & #31; Get a preview of the scanned image and accept.

  Kind regards.

• On Mac, how to scan multiple pages to a pdf file using the analysis of the glass?

  Mac OS x v10. 7, how to set up analysis of the HP Officejet 6500 multiple pages in a single pdf of the file by using the analysis of the glass?

  I couldn't find the box uncheck the box to 'Save as individual file' to the Mac.

  My reccomendation is to use the Image Capture in your Applications folder.  Choose your scanner to the left, then click on "Show details" on the bottom.

  Choose the PDF format, then check the box for "combine several pages into single file" (or similar words).

• The analysis of the non-numeric characters in a string

  Hello

  I am communicating a robot to LabVIEW (2013) via TCP/IP and sockets. The robot is the server, and LV is the customer.

  I start with the target data in this format (in a string):

  "[0 ~ 100 ~ 0] ~ [0.96593 ~-0.25882 ~ 0 ~ 0] ~ [1 ~ 0 ~ 0 ~ 0] ~ [150 ~ 50]."

  [X, Y, Z], [Q1, Q2, Q3, Q4], [C1, C4, C6, Cx], [TCPVel, OrientVel] except replacement ',' (comma) with a ' ~ ' (tilde) because I load the target data in a spreadsheet which is a comma-delimited file.

  In LV, I take this string, the analysis of the chain and split individual items. I then pulled the singular elements as unique, 32-bit of real numbers. I take each one and convert them individually to a string, concatenate them and send them to the robot. The robot decompresses these raw bytes individually and converts them to a target of robot (position in space).

  I train (BT) check if the user has sent a bad character (non-digital) in the target data. Example of this is:

  [- 50 ~-150 ~ 0] ~ [0.96593 ~-0 ] [B2has5D882 ~ 0 ~ 0] ~ [1 ~-1 ~ 0 ~ 0] ~ [150 ~ 50]

  Now in BT, when I'm scanning the chain, these bad character becomes the entire element to zero and everything else then to zero as well. See attachment for example screen similar.

  My question is, my VI, I can analyze all non-numeric characters (that are inside the parentheses and characters that are NOT a ' ~ ' (tilde))? In this way, I can always get this item numbers and do not have this element or other items turn to zero?

  Thanks in advance for any help!

  Sorry for the question of the test

  SM

  
  

• How do you make an average of only ONE channel in the analysis?

  How do you carry the 'average' function in the analysis using a single channel? Currently I have to for this by hand in the .csv file I import to tiara. I prefer not to do so because of scripting.

  
  

• error-5093 "the analysis library is not found" in the 64-bit project. But the analysis library is located in the 32-bit project

  Hello

  I use the system of Labwindows/CVI 2010 full development in a Windows 7 Professional 64-bit computer. Thus, the analysis library is installed (see the attached file) and the analysis of the options to customize menu library is selected.

  I use several function analysis library (WhiteNoise, MaxMin1D, LinFit, etc.). 32-bit projects work very well. 64-bit project there is not link error, the exe file is created, but there are errors like this:

  Function WhiteNoise: (return value is 5093 [0xffffffffffffec1b]). The analysis DLL library is not found or cannot be loaded.

  Ditto for the other functions of analysis library.

  How to use the analysis in 64-bit projects library, is the library of analysis 64 bit compatible?

  Thanks in advance

  Hi DansatB,

  Thank you for posting on this forum!

  Yes, the advanced analysis library is 64-bit capable. I can do the test on my computer the CVI 2013.

  I think it'll be great correctly uninstall your version CVI all ANS reinstall.

  Concerning

• The analysis of the Variables of e/s channel properties

  I have a situation in which I would like to configure the Daq on a cRIO since an interface of configuration on a Windows host. In particular, I would like to get IO addresses Variable for all analytical engine channels configured on the cRIO. The Setup program runs on the Windows host and impossible to deploy any demon on the RT which could question the material. He needs run as if the cRIO is not present.

  The configuration program is part of the same project as the cRIO, so my thought was to analyse the project to find corresponding topics. Here's a post that does something very similar:

  https://decibel.NI.com/content/docs/doc-16630

  However, this has several problems. This example was written in 2011. I am using 2015. Apparently, the properties have changed since then. Children' find' (it is no longer named "children []") does not give me the chassis on my 9068 reference. Instead, I could use the property "Items Owned []", which gives a bunch of things, and then I search the TypeString of these things until I have find one that is "Chassis". Fair enough. Then the ref chassis gives me the Modules and the Modules of give me the channels. Seems pretty good. But all I get are the names of channel. I can't find all the properties that define the type of module or the direction of IO. For example, I would like to know if a variable is a Boolean or real, and if it is a path of entry or exit. You can deduct that the names 'standards', if the project has not been changed to allow giving them a meaningful name to create or. But it looks like there should be a way to find these properties directly.

  Any ideas?

  TIA,

  DaveT

  I think that the analysis of the project tree is a quite fragile strategy that you should know already. AFAIK the OR sanctioned for this sort of thing for a few years now is to use the API of the System Configuration. Yes, it's a pretty involved API and need you a little time to learn how to get the specific information you are interested in. Fortunately there are some examples that you can use to start with.

• The analysis of the data of a string of series

  Alert LabVIEW Express 7

  Sorry, all I have to work with and there is no budget at the moment to upgrade.

  Hello, I am in phase 1 (data transfer reliable to labview) 24/7 of my small Miettinen, who is to display and record data environmental Lab 24/7 our Fisher 02-403 digital barometer that has a serial port. In fact, it came with the software, but no one here seems to like use it so I'll try to find something more intuitive. I can't find any info at all about I/O with this device, so I'm reverse engineering. I'm sure that you cannot write anything to this device only read.

  I started with the connection of the device and the interface with NOR measure and automation and received the following string: P,43,1019,44,31,01,0023.0\r\n.

  I tried to use the Labview 7 Express e/s Companion Instrument, selected 1 COMM, changed the timeout to 5000 (trial and error), added a step reading and analysis, ran and received the following string: P, 43,0999, 44,41, 01,0018.0, XX. After well guess, I determined that the values I have in bold change with the environment and the other 3 are always the same idea 9no what they represent). Alphabetical 1 in bold represents the tendency of climate S sunny = P = C sunny cloudy = etc., the value 2 is the atmospheric pressure in hPa, the 3rd is % relative humidity and the last is the temperature in Deg. C.

  At first, I tried to create simply chips for data I want and operation loop the wizard of e/s in awhile, but often error messages obtained suggesting that I need to define all the tokens in the string. I did it and it worked, then I opened the front panel to access the underlying schemas whence I came with the attached VI. I left this race for more than 24 hours, no error, seems good.

  My question on this forum is, can I simplify this VI losing a part of the analysis of the data that I don't need at this point?

  Please let me know if you can not access this VI maybe I can do a screenshot or something.

  Thank you

  Doug

  Yes, it can be simplified to just a bit.

  

  Since you are new to LabVIEW, you can start with the basic tutorial.

• The analysis table of Boolean in FPGA

  Hi all

  Although I programmed in LabVIEW several times, I am quite a novice when it comes to programming on an FPGA, and I learned that I will (which, so far, has worked with little problem).  However, I have solved my most recent problem and more I read on the FPGA, less certain I am that what I try to do possible.

  The task is to read in a number of bits of the digital input/output lines of the FPGA and the analysis of these bits in specific words / "bytes."  For the application of the VI that I have attached, I rigged reading in a certain number of bits by providing three words of 26 bits (for a total of 78 bits) that have been defined on the front panel.  After providing the bits specified, I try to analyse the bit array in the specific words that are given by the following logic:

  1. find a start bit of 0 (false bit).

  2. once the start bit of 0 (false bit) is the word that seeks to analyze is the next 10 bits.

  3. after the start bit and 10-bit of data is a 1 (true bit) stop bit.

  4. Repeat steps 1-3, five times.

  The logic above, should be six words analyzed in total for the provided VI.  Unfortunately, I can not simply take 12 bits (1 start bit, 10 data bits, and 1 stop bit) at a time, as the number of bits of padding between successive words is variable.  The VI I provided is a version of how I proposed to perform the logic above, but I can not compile the project/VI, I get constantly mistakes "Tables to be fixed size."  To my knowledge, all the tables in the VI have been allocated in advance, and seems to be deterministic.

  If anyone has any suggestions as to why this VI is not compiled, I would greatly appreciate.  Thank you in advance for taking the time to look at it, and I look forward to resolving this issue.

  With gratitude,

  Gregory

  Unfortunately, you'll have to rework this VI to run on an FPGA.  You cannot move tables in memory in an FPGA the way you can on a PC.  You have an array of variable size as the exit to remove the table, because the entry of length is not fixed at compile time.  In addition, two-dimensional arrays are not allowed.  Remember when coding for an FPGA you actually write the material - each value in a table is basically a circuit (that's my oversimplified understanding).  The compiler cannot affect the right number of sons to carry a table if it cannot determine the size of the array.  The table is not in memory, so there is no way to reorder running.

  There are two ways you can work around this problem, which will require an iteration through each element of the input array.  You could use a FPGA FIFO and just put the values in the FIFO which are given (that is to say, in a loop until what you have touched a start bit, putting the next 10 values in the FIFO).  Then across the FIFO, possibly in a separate loop, read 10 bits at a time to get your words out of data.  Another approach is to reorganize the table as you go.  Keep track of the current location in the input array.  When you hit a start bit, away from the 10-bit (you may need to do this one at a time) to the current location in the input array, incrementing the current location every time.  When you have completed all entries, all data will be at the beginning of the table in units of 10 bits, which you can split out as needed.

• What is the analysis

  I tried to uninstall some programs in the Panel, he said the analysis failed, what is the analysis

  and how fix this annoying problem, there are many games that have been removed from Office

  on it, should I uninstall in Control Panel as well. Thank you

  Hi tengarertermoana,

  Here are many sources that define the analysis - pick a bit until you understand: http://www.bing.com/search?q=Parsing+Error+Definition&FORM=QSRE1.

  But the real problem is that you deleted games from the desktop instead of deleting or uninstalling them and so the standard uninstall process is now having trouble functioning.

  In this case, I recommend you download Revo http://www.revouninstaller.com/revo_uninstaller_free_download.html (the free one for now), install and run it in advanced mode to uninstall and completely remove these programs from games.  It often works where standard uninstallation fails.

  If it turns out that some of the games do not appear in CP programs to uninstall and also not appear in Revo but you know they still exist on the system for some reason any - even though you did not mention that as a question (perhaps see it in Windows Explorer or in the registry (don't mess with the registry to change it here - just to see if you can find any evidence) , then the paid PRO version of Revo (with a try free 30 days you can cancel when done and then re-install the version free of charge as it is a great tool and I want to uninstall everything in advanced mode because it works better and keeps the System cleaner) has a partial ability to find remainders of programs that do not appear in the list. It's one of the reasons people pay for it - but I don't think that you need and not worth the money when the free version has almost always been around.

  I hope this helps.

  Good luck!

  Kosh

• In the analysis of noise problem

  Hello

  I see now a BiQuad filter two steps and I want to know the noise in the axis of the output "out". However, the analysis of noise gives me nothing, but just a black background without any digit or number. What would be the problem? Thank you very much!

  Better compliance

  Billy

  Hi Billy,

  It's a problem of DC convergence in the simulation. In the scan options, select use custom settings.

  

  On the Global tab, the value of the Shunt resistance of analog nodes on the ground [RSHUNT] 1e + 008

  

  On the DC tab, set the iteration DC [ITL1] limit on 400

  

  Then simulate again and now you can see that they are all posted!

  

  

  Hope this helps!  :-)

  Kind regards

• The analysis appears when I turn on my computer and it won't go away.

  If I hit Cancel I get error 1706. I have had this problem since I had to uninstall Roxio Creater 2009. No idea how I can get rid of the box Scan? In fact, I have two boxes to scan at the time.  One of them says: "the component you are trying to use is on a CD-ROM or another removable disk that is not available...". Insert the diskette "Scan", then click OK. "With this box, I have the opition to click OK or cancel. If I click Cancel then I get error 1706, if I click OK, it just says: access to the content of the service... but nothing happens. The second Scan box says "Please waith while Windows configures the analysis" with a Cancel button. I had this problem for a week the tims boxes are flashing and my computer is unusable basicall. I ran my anti-virus scans and there is no problem what so ever. Help!

  Hi EugeneWI,

  Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  You can also check if the software vendor has an uninstall program to remove the software completely from the computer.

• Executable built with CVI 8.1 error-5093, the analysis library is not found

  Upgraded to 8.1 Labwindows/CVI of Labwindows/CVI 7.0 development machines. An earlier application was built using the ICB 7.0 and installed on a test computer. The same code built with CVI 8.1 is any error during execution of the function stdev, 5093 error code has been generated. (From analysis.h: LibraryNotFoundAnlysErr =-5093, / / the analysis library was not found.) Tried to build a facility with 8.1 and installation on the test computer and application errors still executing the stdev function. Back to the same application, but built with CVI 7.0, it works fine. Am I missing something with the build in 8.1 options? Or is it something in the workspace or project? Please notify. Thanks in advance

  Hi Tommy,.

  In CVI 8.0, the implementation of the analysis library has changed a static library that is linked to your .exe in a DLL that must be loaded when running. If you rebuild your source code and you want to deploy to another machine where the CVI environment is not installed, then you must re-create an installer in CVI 8.1 distribution, so that he can pack the analysis as well as your program library.

  You can confirm whether the analysis library is installed by searching for C:\Program NIUninstaller Instruments\Shared\Analysis\nianlys.dll in your target machine (although it is not enough to simply copy this file manually).

  When you create an installer in the CVI, be sure that, in the tab drivers & components in the dialog box change Installer , support of analysis element under the Group of LabWindows/CVI Run-Time Engine is checked.

  Luis

• How can I change the directory in which the analyses are placed on my computer?

  How can I change the directory in which the analyses are placed on my computer?

  GAS - 121 wrote:

  How can I change the directory in which the analyses are placed on my computer?

  Select HP Scan.  Select Advanced settings.  Select the Destination tab.  Select the save location.

• HP Deskjet Ink Advantage 3545: Results of the analysis of the Palm of the hand

  I'm trying to analyze the Palm of the hand for the purposes of astrology. I'm scanning from laptop to the printer. When I use the color and grayscale options, the image just right with light background of my palm and dark and distinguished lines area. But when I use the black and white area light background most of Palm appears also in black. Fundamentally important field of my Palm appears black. But when scanning documents that does not happen. Y at - it another option to scan the Palm in black & white?

  Hi @F50,

  Welcome to the Forums of HP Support!

  I understand that you're looking to analyze the Palm of your hand for a class project and are curious why the black and white adjustment does not come out as well as scans of color and grayscale.

  I try to adjust the scan (PPP), superior quality and adjust brightness settings upwards or downwards to see if that helps.

  I don't think that your scans will be as sharp and vibrant because of the light entering the gap between the scanner cover. When the light seeps into the scanner, it can greatly reduce the quality of the scanned items.

  NOTE: The scanner in this printer is designed for scanning flat objects, not 3D images what is your hand.

  I would take a different approach to this. I suggest that you take a picture of your hand on a black and white camera or save to your computer and convert as black and white in the photo editing software.

  If you don't have a camera try this.

  • Darken the room as much as you can so that no light can enter into the analysis.
  • Place your Palm flat on the glass completely.
  • If you can't darken the room, temporarily put a towel or blanket over the scanner during the scan of the hand. Do not leave it on top of the printer. This is to try to eliminate all eternal light that seeps into the scanner.

  I hope this helps. Good luck!