The application name does not change in 2.0 WebWorks

Similar Questions

• Import a Configuration of PeopleSoft file - Sever application name does not

  I support an environment in which run us multiple PeopleSoft applications that our developers/firstlinesupport need access from the same set of tools to connect to AppDesigner/query/nVision on various databases associated with applications.  To do this, we have been launching since their office batchfiles that import different through psfg configuration files and importing these *.cfg files and then launch the application on the desktop.

  Currently we are being upgraded to 8.53.16 to our applications and this process still works for the most part, except for those that connect through the application server.  Now, when import us configuration files complete with sections for ApplicationServer connectivity, the connection information for the application server does not appear in the name part of the login screen Application Server.

  Someone else has a similar configuration or have indications as to why this is happening?  Thanks in advance

  There is a small change in the syntax of the file export/import to 8.53.

  Tags section [Application Servers\DOMAIN] changed to [application853\DOMAIN servers]

  You should be able to edit this by hand to fix or you can also enter again your configs and export with 8.53 to make sure everything is just right.

• 500 the application author does not match the author token of debugging

  My name is Jean-François Geyelin. My application name is PewPew.

  When you try to run PewPew on a playbook, I get the error "500 the Application author does not match debug token author.":

  the command deploy blackberry - installApp-password abdelkader 192.168.1.37 - package device-Debug/PewPew.bar returns:

  Info: Send request: install
  Info: Action: install
  Info: File size: 3575023
  Info: installation...
  Info: Treatment 3575023 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 500 the Application author does not match debug author token.

  I did check the following:

  the blackberry-nativepackager - listManifest PewPew.bar command returns (among others):

  Package-author: Jean-Francois Geyelin

  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  blackberry nativepackager - listManifest library/Research\ In\ Motion control / debugtoken1.bar returns (among others):

  Package-author: Jean-Francois Geyelin
  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  What should I check or what is the problem?

  
  

  Problem solved by clearing and forwarding of the token of the device debugging.

• Have dwnloaded Firefox, but invites to drag in the applications folder does not

  Downloaded Firefox, but invites him to drag the icon to the applications folder does not occur. Please notify. Thank you

  If the disk image file is not opened automatically, then you must open the DMG file yourself.

  Open the Firefox disk image file and drag the Firefox program into the Applications folder on your hard drive.
  Do not double-click the Firefox to run from the disk image, but instead, drag it out of the DMG file.

  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

• SSRS 2008 SP4 - header or footer of the report contains the dynamic image does not change

  Hello

  Our version of Reporting SERVICES to current production is 2008 (not R2). And we have the problem that the header or footer of the report contains the dynamic image does not change accordingly.

  According to this hotfix, the problem has been resolved in the last SP R2 and we tested, it works.

  https://support.Microsoft.com/en-us/KB/2563216

  So we applied the latest SP to SQL Server 2008, however, the problem persists.

  However, we do not expect to upgrade the SQL Server 2008 to 2008 R2 for the moment.

  Guys have faced the same problem before and has an idea how to solve this problem on SSRS 2008 or any workaround?

  Thank you

  Kind regards

  Dan

  Hi Dan,.

  For assistance on questions related to SQL Server 2008 and SSRS 2008 SP4, ask your questions here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  https://social.msdn.Microsoft.com/forums/en-us/home?category=SQLServer

  Hope the information is useful.

• The application icon does not

  The application icon does not appear on the home screen.  I managed to deploy to using javaloader and Office Manager because it comes in Options-> advanced-> Applications, and I am able to uninstall it via Desktop Manager. It is only fair that the icon does not appear.

  If it's important, I'm using controlled BlackBerry API.  I received and installed the keys with success.

  Any ideas?

  Edit: I use the Eclipse Plugin Windows XP, OS 4.5

  I don't know what the problem was, but I solved it.  I just created a new project of BB starting from zero and copy and pasted my code and rebuilt.  Works fine now.

• . / deinstall.pl: / usr/local/bin/perl: Bad interpreter: a file or a directory in the path name does not exist

  Hello

  I want to uninstall my OS (IBM AIX) database software, but when I lance./deinstall.pl, I got error with the message:

  «. ' / deinstall.pl: / usr/local/bin/perl: Bad interpreter: a file or a directory in the path name does not exist.

  In usr directoryI don't have any perl file, the same time on another server uninstall procedure completes successfully.

  Anyone have the same problem?

  Thanks in advance!

  ln s/use/bin/perl/usr/local/bin/perl

• Application file name does not change

  After I go to BUILD > CONFIGURATION > MANAGE CONFIGURATION > RELEASE > EDIT > TARGET SETTINGS, then type a new name in the APPLICATION FILE field, or actually browse and select the file I wanted he call to, and select OK > DONE > DONE. It does not change.

  Worm 2010

  Have you tried to give him directly into the Build > parameter control targets, by selecting the Release configuration, by typing the name? I always do this way and the name actually changes.

• Button value change records in the structure of the event, but does not change appeaance?

  Hello world

  A quick question... I hope someone can answer...

  I have a code that uses a PS button within a structure of event to trigger a signal of AO... My code is below. The code works fine and the OD goes off when you press the button E-Stim... But when pushed the button does not change with reliability the appearance (i.e. of the gray 'off' red 'on' color)... Sometimes color changes; no other time not... If I remove the structure of the event and the survey button in the appearance changes as expected.

  What is going on? I would like the button to change the colors on the user interface to indicate that it works... Should I programmatically control the color?

  Kind regards

  Jack

  

  I guess that when query you the button you have some delay in your loop? Locking means that the button will change its value when you press it, then switch back to the original value once the value of the control has been used by the code. When you ask, this means that until he reaches the next iteration of the loop, but in the case where the structure that will happen immediately.

  The default setting for the buttons to modify its behavior as in most of the application would be latch releasing. You then raise the event when the button of the mouse over the control. This also allows "drag" control if you push down on the subject, given that you do not release control in this case.

• Satellite A300-17N - the CPU multiplier does not change under load

  Hello

  I have Toshiba Satellite A300-17N. Yesterday, I noticed that my CPU does not change its multiplier under load.
  I have used programs like premium 95 and Orthos CPU load and programs such as CPU - Z and Everest.

  The multiplier blocked on 6 and do not change its value.
  Under load the multiplier should change its value to 13, but it didn't happen.

  In this case my CPU works on 798 MHz (133 x 6) 1732 MHz (13 x 133) instead.
  I will be grateful for any advice.

  Hey Buddy

  I put t know what you are talking about, and I don t know if you're up-to-date on CPU technology but the laptop was equipped with the Intel Pentium Dual - Core T2370 processor.
  I recommend the Intel page on Intel Dual-Core T2370 properties.

  This processor supports Enhanced Intel SpeedStep technology.
  Do you know what it is?

  Here is a short info from the Intel page:

  + Enhanced Intel SpeedStep technology allows the system to dynamically adjust the frequency of voltage and core processor, which can translate into a reduction in average energy and decreases heat production average. +

  I think it should be clear now.

• Global VI on the low level does not change from front panel indicator

  I attributed to a global variable (CMM_SN_Global 3.vi) to a value in a Subvi two levels down from the façade. When I run the VI of Panel before a flag set by the overall does not change even if the global variable is assigned the correct value until later in the program. Shouldn't be an indicator on the Panel before the value assigned to the global as soon as the world is assigned a value. Or is it not true?

  Thank you.

  Chuck M.

  Hi Chuck,

  If you asked for examples:

  

  What we have here:

  -the select node with these 3 Boolean constants is really absurd (aka RubeGoldberg) the output is always TRUE!

  -l' 'position' indicator belongs outside the case statement, any write on this indicator ("unnecessary local"!)

  -Why is there an additional wait inside the case? Do you really need that as you expect in the while loop?

  -It is not recommended to compare floats for equality - as you do here with the structure of your case when wire you a DBL to the input switch. Why not convert the data itself in full to be on the safe side?

  Then you say: "my plan is to have ten independent loops like the top.

  This is the reason for using subvis. You can have as many loops as you want, but only need to code once the algorithm ("duplicate code").

  More comments on why I recommend some "realignment"?

• to the footer in the library file does not change on the site

  I looked for a colleague who uses dreamweaver. I need to change an e-mail address to request information on this site. When I make the change on the footer file in the library and download it, it does not change on the site. Is there more than that? Thank you!

  change on the footer file in the library and download it, it does not change on the site. Is there more than that? Thank you!

  You update the library item, then locally update all the pages that contain this element of the library and then download all the modified pages (that work)?

  or are you simply update the library item file and then download this library file (who doesn't)?

• Downloaded Firefox but the folder of the application icon does not appear

  I downloaded Firefox on my new Mac, but the icon which is supposed to show up to move to a folder of application does not appear.

  When he started for the first time and in the doc, is it possible to drag and drop the icon into the applications folder? And what does it remain?

  It is possible that the default installation folder has been moved. However it would have been necessary to be changed. Have you downloaded from: *https://www.mozilla.org/en-US/firefox/new/

• 881 failure: The Application author does not match debug author token

  Hey guys, I'm a newbie at software development and don't know anything about the other languages except HTML and CSS so I decided to try the apps program to see how it works and if it's the right think for me. I received my 'key' for the playbook and generated and download the Debug Token. My first idea was to put the Hello World app (that I copied on the BB site) on my playbook to see if everything works, but every time I try to download the app, I get "the application failure 881 author does not debug author token.

  I have tried a few troubleshooting myself (make another Debug Token, adding the and a blackbery - tablet.xml with these fields in the config.xml file and) and still nothing. Do you know the guy what is happening and what should I do to solve this problem, so I can download my apps on my playbook?

  Thank you

  Oskar

  There is an easier way... and maybe just an alternative.  I had this problem before and the reminder to change the bbwp.properties file to run.

  For more information, see this page:

  https://developer.BlackBerry.com/HTML5/documentation/runnning_unsigned_apps_using_a_debug_token_1866...

  Copied from this page:

  For PlayBook OS applications

  1. In the SDK BlackBerry WebWorks for BlackBerry Tablet OS installation folder, navigate to thebbwp\bin folder.
  2. Using a text editor, open the bbwp.properties file.
  3. Add the path to the file to debug token using the debug_token > tags.

     path to debug token file
     

  Example: file bbwp.properties with the path to the file debug token

  
  
  -quiet
  C:\Program Files\Research In Motion\BlackBerry WebWorks SDK for TabletOS 2.1.0\jre
  AirAppTemplates
  AirAppTemplates
  C:\Program Files\Research In Motion\BlackBerry WebWorks SDK for TabletOS 2.1.0\bbwp\blackberry-tablet-sdk
  ext
  C:\my_debug_token.bar
  
  

  You can now load your app on a debug-enabled BlackBerry device without having to sign

• structure of the event recorded does not change value

  I have a VI that communicates with an FPGA via a telnet interface.  I have several Boolean controls on the front panel.  When you click a control, it sends a write command on the face i in telnet to the FPGA.  Similarly, if a process in the FPGA himself wrote the same registry (that control written when I clicked on it), an order is generated in the FPGA and returned to the VI and the control (via a local variable) lights or unlights accordingly (based on value).  In other words, these controls are read-write...

  It's all workers, except for one important thing.  I have the code that runs through a structure of event whenever the value of the control changes.  I can see that this code executes in fact when I click on the control via the front panel.  HOWEVER - when something is generated in the FPGA finally changes the value of the control, the structure of the event does not, even if I see the value of the change of control on my front.

  A specific example, I have a control named CLIENT_LB.  When I click on CLIENT_LB, I see it lights up, and I see the event structure code run.  Now, if I have the FPGA process to set CLIENT_LB to 0, I see unlight on my front, but does not run the code structure of the event.  I have probes in place who have checked the associated local variable CLIENT_LB evolving impact of values.  The structure of the event reads: 'CLIENT_LB': value change.

  Shouldn't an event structure "value change" run when the value changes, regardless of whether if it happened manually (i.e. me by clicking on the control) or automatically (i.e. the FPGA written in VI and changes the value of the control)?

  The VI is great, and you would not be able to test it in any case unrelated to the material, to remedy that I've attached 2 screenshots, I have described below.

  1. This is where the string from the FPGA analysis occurs.  The chain between the sub - VI, and then the data chain part is hidden to determine if the Boolean value of the control is true or false.  I put a probe on CLIENT_LB, and I see that as the FPGA changes the value of the register, CLIENT_LB passes from false to true as a result.  I checked this several times.

  2. it is the structure of the event.  This code runs when I click on CLIENT_LB on my face, but does not run when the peak CLIENT_LB #1 local variable is changed.

  Writing to variables never fires events to "change the value. If writing should raise this event, use the property "Value (follow the signs).

  Norbert