. / deinstall.pl: / usr/local/bin/perl: Bad interpreter: a file or a directory in the path name does not exist

Similar Questions

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Local network does not appear in my computer, as if it does not exist.

  "Help me please, I installed Windows XP on an old computer some time ago in an empty score, but then I tried to connect to the Internet, but he said that" the server is not found.

  or something like that. When I see the network he wasn't there Local network as if it does not exist. I already checked if the cable was not there or if the network card has been broken, but all his past well. I am connected to another PC and it works very well. Help me guys, am I supossed to do?
  Sorry for my bad English, Oscar

  Hi Oscar,.

  I suggest you to follow the steps in the Microsoft article and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• Fail to load the ODI - ODI-17517: error in the interpretation of the task. ORA-00942: table or view does not exist

  Hi all

  Try to run the loads on the test environment and faced this exception. Guidance on what could be the cause?

  A functioning test environment code development. All models have been migrated using the synonym and the project had to be imported using Mode Duplication.

  The project had two dimension and makes loads... Dimensions has been properly run, its only that all the facts are a failure...

  ODI-1217: CM_PKG_CF_TEST Session (1494702) fails with return code 7000.

  Caused by: com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: error in the interpretation of the task.

  Task: 6

  java.lang.Exception: the application script threw an exception: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

  OSB Info: get the joining to the line level columns: column 0: columnNo

  at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:485)

  at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:711)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)

  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)

  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1066)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:682)

  Caused by: org.apache.bsf.BSFException: the application script threw an exception: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

  OSB Info: get the joining to the line level columns: column 0: columnNo

  at bsh.util.BeanShellBSFEngine.eval (unknown Source)

  at bsh.util.BeanShellBSFEngine.exec (unknown Source)

  at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:471)

  ... 11 more

  -< code printed here >-

  at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:738)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1889)

  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)

  to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1066)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:682)

  An analysis more thrust, found that Repo work had no appropriate grants.

  After adding, it solved the problem.

• Qosmio G20-117: bad pixels on the screen and the CD rom does not work

  Hello

  I have a problem with the computer hardware. I got a Qosmio G20-117 and you have a problem with the cdrom and the screen. Got bad pixels on the screen, and cdrom does not work. I live in the United Kingdom, so I tried signing up to them to choose the computer before the computer is out of warranty.

  Whenever I register, it says sorry, an unexpected error has occurred, please try again later. I have tried at least 20 times since yesterday and it doesn't seem to work. I have them even called and they told me, the service is stopped and will be fixed this morning but yet nothing works.

  Any solution?

  Hello

  If you want to contact Toshiba service partner in your country then why you don't call them?
  Toshiba page you will find the database with all service providers in the world.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  I don't think that you need to register something apart from the serial number of your laptop. But in my opinion this could also be done at the point of service.

• Microsoft - accidentally not uninstalled games not in the Recycle Bin, lost the system restore does not work

  Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

  Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

  Assuming that yoy are using Vista...
  Suggestions:

  1. start > all programs > scroll down to find GAMES > open it. MS games still appear? > If Yes, click on one of them > it does not open and it works?

  2. see if this Microsoft Support can be applied to your situation:
  http://support.Microsoft.com/kb/940263 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I have samsung wave3 bada os phone when I connect it with wireless bridge browser does not support or support vary well

  I use samsung wave3 phone with bada OS when I connect with wireless by wifi bridge connection a few times it supports and some time was not favorable

  Hello

  Try to contact Samsung Wave 3 support for assistance related to the question, because it is a community of Windows.

  http://www.Samsung.com/us/support/contact

  Hope the helps of information provided.

• STOP: c0000221 {Bad Image Checksum} the image atl.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  How can I fix this error? I tried to solve it in Recovery Mode. Forgive me, but I'm kinda a noob. The installation is XP Professional. The BONE has been preloaded, so I don't have the original to load disc, but I have a XP Home disc. I ran chkdsk and removed all the disk errors, but I don't know how to extract a new XP disc atl.dll. Thanks for any help you can provide.

  Ok.

  XP has also keep copies of 3498 critical files on the folder c:\windows\system32\dllcache (for future use).  If Windows File Protection detects one of them is missing, it will try to quickly and quietly replace the copy in the dllcache folder.  The atl.dll is one of these files monitored in the list (Yes - there is a list).

  You can copy the missing files to this folder by using the Recovery Console too.

  Depending on your installation, you can also get copies of missing files here:

  c:\c:\windows\ServicePackFiles\i386

  The file should never miss, so if yours had disappeared, I suspect your asked for but unspecified app antivirus/antimalware quarantined (effectively deleted) file.

  AVG, Avira, Avast?

  You should check the dllcache folder and if the file is not there, paste a copy there too so PAM has a backup if ever, replace it.

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• CS6 help does not work in Local mode

  Hello

  I downloaded the demo and installed Mac OS Lion. The request for help does not work; the omly thing that it will display's settings window. After local content downloading and clicking on the fact, the window disappears, but when you click the application icon, it reappears again. In short, I can't display help at all in the aid application, even though I have it set to always use local content. Anyone else run into this?

  THX

  Hi telebutch,

  Sorry for the inconvenience, you face.

  The path on your local computer would be:

  / Users / [user name] /Library/Preferences/chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1

  If the folder above does not exist, check if you have more than one medium volume? If so, the directory above can be created on the mount where launches 'Manager Adobe help.

  Another reason why 'Adobe help Manager' keeps popping up that is already active sound the system tray. YOY can "Force quit" the application after you set preferences and try an another invocation of help.

  If nothing works, workaround to stop "Adobe help Manager" to launch whenever you launch help, maybe remove the application from your system. Open "/ Applications/Adobe" in the Finder and place 'Adobe help eat' into the trash. Note that this can also mean that you will not be able to download any help offline - and all the help incovations would need internet connectivity.

  Hope this helps and let us know if you still see issues.

  Kind regards

  Sandeep

• 11 GR 2 on the local bin OL5.7 directory

  I'm installing 11 GR 2 on Oracle Linux 5.7. All by running the required scripts to be run when logged in as user 'root', one of the
  questions, which is the full path of the local bin directory. On my system, I have the following:
  
  usr - this is an existing but currently empty directory - no such file or directory in it.
  / usr/bin - existing directory with lots of files and two subdirectories
  "/ bin"-existing a directory with many files
  
  What path should be supplied for oracle? the default value is usr

  Use the default (/ usr/local/bin)

  HTH
  Srini

• Local security configuration DCOM blocked me as an administrator. Many functions of Windows do not work

  Dell Optiplex 745, XP Pro, SP3. The computer is 3 years, 3 G of Ram. Fully secure and clean.

  This is what appears in the local security settings, Security Options: DCOM: Machine Access: 0:BAG: BAD:

  I am an administrator and the main user of this computer. Most of Windows functions do not work IE, Office, Outlook, Security Essentials, copy & paste, all dead. Will not allow downloads (Dell has tried to put a remote meeting and the computer won't do anything. No system restore, I tried Safe Mode, can not access user accounts. I'm stuck on my computer. Dell says it's a problem of Ms.

  I can't open my documents. Word does not. Excel does not open. I use this computer for work and have important files that will not open.

  Goggling BAG: BAD brought me an article of the millisecond that changed the security system. I tried the directions and will not work. I hope someone understands what I'm trying to explain. Dell offers a complete reinstallation of XP, but I'm afraid that I lose my documents, pictures, music.

  I don't know what caused it, that happened this week, I don't know how to fix it. System Restore is a white screen. Can not open anything or run analyses "access denied" or the product is not registered. I get all sorts of errors.

  Please advise,

  Jane

  Hi Jane,

  Follow the steps below:

  Method 1: Scan files (SFC) system auditor

  Make the SFC scan on your computer and check to see if that solves the problems.

  See the Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe) for instructions.

   

  Method 2: Repair install

  Perform a repair of Windows XP installation to fix the problem.

  For instructions, see the following article:

  Perform a repair Installation

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

  Note Perform the repair installation does not loss of data on your computer.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Flash does not work in FF26, it works in Chrome and IE. I reinstalled FF and Flash several times. I can't adjust the setting of local storage for Flash either.

  Flash does not work on some web sites. I never had a problem before with flash on FF in the nearly 15 years that I've used FF. Recently it has stopped working for some reason any and on some flash sites does not, NHL.com and site of kid Herotopia being just two of them. I updated FF, Adobe flash, the reinstalled version them repeatedly deleted all the files that have been stored on my laptop; that is, profiles, saved favorite nothing that I could find in user accounts and in the local app, low local and roaming data folders. What is strange, is that I can't set the local storage for flash either. When I visit the Adobe site to view the Adobe Flash Player Settings Manager I can move the scroll bar, but cannot check the: allow third-party flash content to store data on your computer. I can't do it on a Web site where the flash does not work. When I try and it changed on any site that it goes back to zero. Not sure if it is a part of the problem. I got tired of many suggestions on the pages of material here, but nothing works. I even tried this http://forums.adobe.com/message/4566499#4566499#4566499

  The other strange thing is that I used to get the "warning: script does not" prompt that displays "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. "sometimes when I would buy on Macy's.com. This is the only site that it happened.
  I know I have only little technical knowledge, but I have tried to figure this out for a few days and do not know what is happening. The only thing I can think is that I somewhere files corrupted causing this problem. I have just updated to Windows 8.1 tonight in the hope that can help, but nothing helped. I would be very disappointing if I couldn't use FF or must go back using Chrome and FF.
  Sorry for the posting long but no solution would be much appreciated.

  Hi jscher2000,.

  Yes, I followed essentially the: Manual steps: https://support.mozilla.org/en-US/questions/968190?page=5#answer-509209 you have posted.

  And after restarting Firefox, Flash worked. Thanks again for your post I could not find this solution on the Adobe forums until you have posted the link.
  Your expertise and your time is much appreciated.

• structure of the event does not record local vars

  I have a gif of a FPGA based topology I want to show some telesignalisations in.  As the user clicks on the Boolean, vertical lines appear and disappear as they click on it again, showing the current topology of closure.

  To save resources, I opted to use a structure of the event.  So far I put it for internal RX_FAC and RX_TERMXCO4AU you see at the top left of the image.

  A single loop of RX and one TX closure may be on at the time, so one of the first things that happens when the user clicks on the Boolean value is that it defines the values of all other Boolean in the same row of fake, thanks to the use of local variables.

  The problem is - the structure of the event runs only when the user actually clicks the Boolean true or false value, but not if the boolean is false through the use of a local var.  In other words, let's say I RX_TERMXCO4AU true and false RX_FAC.  If I click on RX_FAC to set it's true, then you will notice RX_TERMXCO4AU goes dark/false and RX_FAC lights.  So the value of RX_TERMXCO4AU has changed, but associated with the structure of the event RX_TERMXCO4AU does not run (that's why the vertical line between RX_TERMXCO4AU and TX_FACXCO4AU remains).

  This will make a lot more sense if you run the attached simple VI.  Right now, events exist for RX_FAC and RX_TERMXCO4AU, but it is sufficient to explain the problem I think.

  Any help is appreciated.

  The structure of the event is for events generated by users.  Writing to a local variable is a programmatic change.

  You want to do is write your value to the Value property (Signalling) of the Boolean that will change the value and raise the value change event.

• Computer keep closing, when restart receives the message: / users/Scott/appdata/local/FL... / Bribfpmco.DLL. Then he said: the module is not found.

  Original title: my computer guard stop

  I have to restart if it has not been used in about an hour or two. When I restart I get this little screen I've ever had before its loading:

  C:/users/Scott/appdata/local/FL... / Bribfpmco.DLL. Then he said: the module is not found.

  Anyone know what it is?

  Thank you

  Scott

  Hi Scott,.

  This problem can occur because of corrupted system files or any what conflict of third-party application.

  Please help me with the following information related to this issue:

  1. What is the brand and model of your computer?
  2. When exactly your computer shutdown? It's trying to access any document in particular?

  I suggest you to check the issue by starting your computer in safe mode. If you experience the issue in safe mode, I suggest you perform the clean boot and check. Follow these steps:

  Step 1: I suggest to start the computer in safe mode and check if the problem is still present. Please see the link below to start the computer in safe mode:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-CA/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Step 2:

  If the problem does not exist in safe mode, I ask you to perform clean mode and then check the status of the issue. A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.

  Please answer us on the State of the question to help you further.