Satellite A300-17N - the CPU multiplier does not change under load

Similar Questions

• Satellite A10 S203: the CPU fan does not work properly?

  I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

  Hi SACRIFICE them.

  Here are some possible solutions to this problem of fan.

  1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

  2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

  If please check this and an answer then follow the next step!

  CAMPino

• SSRS 2008 SP4 - header or footer of the report contains the dynamic image does not change

  Hello

  Our version of Reporting SERVICES to current production is 2008 (not R2). And we have the problem that the header or footer of the report contains the dynamic image does not change accordingly.

  According to this hotfix, the problem has been resolved in the last SP R2 and we tested, it works.

  https://support.Microsoft.com/en-us/KB/2563216

  So we applied the latest SP to SQL Server 2008, however, the problem persists.

  However, we do not expect to upgrade the SQL Server 2008 to 2008 R2 for the moment.

  Guys have faced the same problem before and has an idea how to solve this problem on SSRS 2008 or any workaround?

  Thank you

  Kind regards

  Dan

  Hi Dan,.

  For assistance on questions related to SQL Server 2008 and SSRS 2008 SP4, ask your questions here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  https://social.msdn.Microsoft.com/forums/en-us/home?category=SQLServer

  Hope the information is useful.

• The application name does not change in 2.0 WebWorks

  Hello

  I changed the name of the application in the config.xml file in the www folder. But when I reinstall the application again, the application name does not change. Removal and installation of new but certainly not it's always the same thing with the default name which is «WebWorks app» What is the problem? I couldn't change it.

  Thank you.

  Hello

  It is a known issue with version beta. The name and the icon is changed in the file of the bar, but persists on the device. If you have to deploy the same file on another device appears the correct name.

  The solution is to change the code of the widget as well.

  This will be fixed in the Gold release.

• The CPU fan does not work on Satellite A60

  Hello world

  I have a little problem with my laptop.
  I noticed my cpu fan does not work. only the second fan are working fine. (general fan)

  my PC is a satellite A60
  You have a solution to find why my fan does not work?
  THX

  Hello

  I put t know what fan you mean because I saw only a single fan at the bottom of the unit. However, perhaps the second fan is hidden.
  It's not easy to say why the fan doesn't work. Maybe dust clog up the fan and cooling module may not work correctly. You can try to use the vacuum cleaner to clean the fan.
  If it doesn t work so I guess there must be something wrong with the material and to fix this, replace this part. But in this case I recommend to contact the after-sales Service of Toshiba partner. He has much more experience in such cases.

• Satellite A300 - 08V PSAGCA - CPU multiplier fluctuating

  HI guys.

  Recently, I had a few problems of CPU speed with my Toshiba A300 PSAGCA O8V01N.
  At first I had no idea what was causing the problem, nor in how to identify it. I've recently went to a tech forum and asked the same problem for the guys out there. Thanks to them I found that my cpu multiplier changed automatically, apparently as a result of heat from the system.

  The previous forum that I have been about this problem.

  I thought I found a bios update patch. (Insyde h20: since version 1.60 to 2.10). Update the bios had temporarily solved the problem, putting up my multiplier back up to 9 and the 2.4 GHz complete I was supposed to be seen. However, when I played COD:MW2 afted address the issue of the frequency of the computer has really hot (fortunately I got off before it crashed).

  After that, he returned to .79Ghz at 3 x multiplier (as before). Before I finish, I looked in the bios for all parameters. Called the "dynamic CPU frequency Mode" was the dynamic value, which regulates the energy consumption and, consequently, the speed of the CPU.
  So I applied it to still weak. (which means that this feature is disabled.) However, it has not changed anything noticeable...

  Apart from that, there was no other parameters related to my problem. Can anyone help?
  Can I change the multiplier?

  Thanks in advance.

  + The message was edited: link has been removed - unauthorized +.

  Hello

  My knowledge, laptops BIOS does support all of the options that allows you to change the CPU multiplier.
  A few years ago, I used a desktop PC and BIOS and my taken desktop PC motherboard support this feature, and I was able to overclock my processor. But this is not possible with the BIOS of the laptop.

  If you want to set the CPU to lower the frequency then I recommend the settings in Vista or Win 7 Power Management.

  There is usually an option called CPU power management and you can set different performance (min and max) while the laptop is running on battery or power.

  Check it!

• Satellite A300 - built-in Chicony webcam does not work with Win Live Messenger

  Hello

  I just bought a * Satellite A300-1MC * (works on Vista Home Premium) and downloaded Windows Live Mail and Live Messenger.
  The integrated webcam does not work with Live Messenger; and when you select the tool, Audi + Vieo Setup in Messenger I get thye following message: "we are unable to launch the Audi video installation.
  The webcam works fine with the Camera Assistant Software.

  I tried: 1) killing the AC software and from Messenger. (2) dowanloading one driver webcam Toshiba Web site; (3) update of Windows Vista
  None of the above works.
  Any suggestion received with joy...
  Thomas

  You can try to install the CAM such as ManyCams software - http://www.manycam.com/
  Basically, the program to access your webcam video and redistribute it as a video device ManyCam.

  Richard S.

• Satellite Pro P300 - Fn + f5 combination does not change the monitor

  On two laptops of P300, we have a problem that the fn + f5 combination does not change the layout of the monitor.

  If you press fn + f5, you see the bar where the different modes are displayed, but if you release the layout remains the same (laptop as a single monitor)

  Thank you, best regards,.

  Davy

  Hello

  In my opinion the previous action (installation of the catalyst hotkeys and reinstalled the hotkey driver) is the reason why the FN + F5 does not work properly.

  In my opinion, you should clean the registry first.
  Use CCleaner. It s free and cleans up the registry.
  In addition, you must remove the catalyst shortcut keys because this may affect the Toshiba FN Hotkey feature.
  Finally, install the Toshiba drivers from the Toshiba page
  More info (right on the Toshiba driver page), you will find details on the tools simple and drivers and what are they for...

• Button value change records in the structure of the event, but does not change appeaance?

  Hello world

  A quick question... I hope someone can answer...

  I have a code that uses a PS button within a structure of event to trigger a signal of AO... My code is below. The code works fine and the OD goes off when you press the button E-Stim... But when pushed the button does not change with reliability the appearance (i.e. of the gray 'off' red 'on' color)... Sometimes color changes; no other time not... If I remove the structure of the event and the survey button in the appearance changes as expected.

  What is going on? I would like the button to change the colors on the user interface to indicate that it works... Should I programmatically control the color?

  Kind regards

  Jack

  

  I guess that when query you the button you have some delay in your loop? Locking means that the button will change its value when you press it, then switch back to the original value once the value of the control has been used by the code. When you ask, this means that until he reaches the next iteration of the loop, but in the case where the structure that will happen immediately.

  The default setting for the buttons to modify its behavior as in most of the application would be latch releasing. You then raise the event when the button of the mouse over the control. This also allows "drag" control if you push down on the subject, given that you do not release control in this case.

• Global VI on the low level does not change from front panel indicator

  I attributed to a global variable (CMM_SN_Global 3.vi) to a value in a Subvi two levels down from the façade. When I run the VI of Panel before a flag set by the overall does not change even if the global variable is assigned the correct value until later in the program. Shouldn't be an indicator on the Panel before the value assigned to the global as soon as the world is assigned a value. Or is it not true?

  Thank you.

  Chuck M.

  Hi Chuck,

  If you asked for examples:

  

  What we have here:

  -the select node with these 3 Boolean constants is really absurd (aka RubeGoldberg) the output is always TRUE!

  -l' 'position' indicator belongs outside the case statement, any write on this indicator ("unnecessary local"!)

  -Why is there an additional wait inside the case? Do you really need that as you expect in the while loop?

  -It is not recommended to compare floats for equality - as you do here with the structure of your case when wire you a DBL to the input switch. Why not convert the data itself in full to be on the safe side?

  Then you say: "my plan is to have ten independent loops like the top.

  This is the reason for using subvis. You can have as many loops as you want, but only need to code once the algorithm ("duplicate code").

  More comments on why I recommend some "realignment"?

• to the footer in the library file does not change on the site

  I looked for a colleague who uses dreamweaver. I need to change an e-mail address to request information on this site. When I make the change on the footer file in the library and download it, it does not change on the site. Is there more than that? Thank you!

  change on the footer file in the library and download it, it does not change on the site. Is there more than that? Thank you!

  You update the library item, then locally update all the pages that contain this element of the library and then download all the modified pages (that work)?

  or are you simply update the library item file and then download this library file (who doesn't)?

• Satellite L300-17N (PSLBCE) - wireless card does not work

  Hello

  I recently bought a Toshiba Satellite L300 (PSLBCE) that came without any operating system and the dirvers. I installed WXP PRO SP2 above and downloaded all the drivers from the Toshiba site. Everything has been installed ok and functional except for the WLAN card. The wireless network card, it is a Realtek RTL8187B but it is not recognized by my laptop: if I Check Device Manager it does not appear (it does appear that "Network controller" with yellow mark). Then I went to Realtek website and download new drivers from there and installed again... also with these dirvers WLAN card still not recognized.

  No idea this coud be the problem? I don't know that I have downloaded the correct dirvers from Toshiba Web site as well as the Realtek site... but none of them helped. The chipset drivers have also been installed and also the last BIOS version (my BIOS version is newer than the one on the site of toshiba with the drivers for this model)
  May this be a conflict with the other dirvers or WXP PRO SP2?

  Thank you

  Hey Buddy

  Satellite L300-17N does not support Realtek RTL8187B but Intel 11 a/b/g (13ch) - Golan Wlan card.

  I recommend to visit the portal of Toshiba Europe WLan and recommend to download and install the driver Intel WLan from here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Here, you can try the Intel PRO/Wireless 3945/4965/5100/5300 driver package!

  I would appreciate your comments

• Satellite A300-24z - VAP - illuminating buttons does not work properly

  Sorry for my English.

  I have laptop Satellite A300-24z, model number PSAG8E and Vista 32 bit.

  I try to install this driver and hit numbers are not having a light.
  I try to do this 3 times and still does not work.
  Can someone help me?

  VAP is not a pilot, but includes 7 different tools and utilities. One of them is to control and when the VAP is installed it works correctly.
  Your laptop comes with Vista preinstalled or you trying to install it on your own?

  I mean if the laptop was supplied with preinstalled Vista, everything should be OK. have you done all that can turn this option off?

• Problems with Satellite A300 - 1GC XP install - CD does not?

  Hello

  I have a few looks to round in various forums and found no answer to everything.

  I have the Satellite A300-1GC and had (from last night) vista on it. As caused Vista
  a lot of problems with different programs, I decided to get rid of him.

  The problem is now--if I stick my XP installation CD it it bed "press any key to boot from CD".
  Do that and then nothing happens. The CD read head stops going back and forward
  but nothing happens at all. Not even the beginning of the blue installation screen.

  Any ideas where this comes from?

  The CD-rom can also be run in AHCI mode (can a CD player what do I do?) and requires drivers?
  I have tried various CD XP - neither work. The last one I had was with SP3 and build in February 2009 so quite recent.

  Clues?

  See you soon
  Tobimaster

  Hello

  In your case the question has nothing to do with the SATA mode (AHCI mode or Compatible) but it looks like the CD/DVD drive cannot handle the Win XP disc
  Why? Who knows

  Always is it that the CD cannot be read and so the installation can not get.

  Try to copy this disc by using another computer and then you can try using the disc copied on order to install Win XP.

  Just FYI: I use TDK (CD and DVD) r discs... I am very satisfied

• Satellite A300-14s feather touch button does not

  Hello

  I installed VMWare player on my satellite A300-14 running Windows Vista 32-bit. But after the installation, my pen touch buttons (esp. enlightenment and CD/DVD) has stopped working.
  Then I uninstalled it but still the problem persists.

  I don't have any system point before the installation of restore.

  What should I do?

  Thank you.

  Hello

  You must reinstall the VAP (value added package) for Vista.
  Usually, this should help.

  PS: Clean the BONES and the front register of insatlling the VAP. You can use CCleaner for that...

  Welcome them