The asynchronous BPEL using SoapUI5.2.1 test error.

Similar Questions

• Unable to start the computer after completing the system scan using Microsoft Security Essentials BSOD error (: 0x0000007B)

  Original title: I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials.removing
  I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials. I have rebooted, tried to finally start work configiration and back still an error for windows startup. Attempted to enter the mode by F8 safe failed I then chose without auto restart in F8 and get the BSOD - he tells me to search for viruses and run chkdsk/f, but I can't access it. I tried to restart and it still does not work. technical information on the BSOD readings * STOP: 0x0000007B (0xF7ae9528, 0xC0000034, 0 x 0, 00000000 000000000. Please help it is essential to address them ASAP edition)
   

   

  Hello

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

• Error in the call to an asynchronous BPEL process

  Hello
  
  I try to call an asynchronous BPEL process via java client.
  Here is the code I got from present SOA bpel samples in the following location
  
  < SOA_HOME > \bpel\samples\tutorials\102.InvokingProcesses\rmi\com\otn\samples\async
  
  The code does not work when you register the callback
  
  String convId = GUIDGenerator.generateGUID ();
  nm.setProperty (NormalizedMessage.CONVERSATION_ID, convId);
  
  deliveryService.post ("HelloWorld", "initiate", nm);
  
  register the callback
  watchdog.registerAsyncCallback (convId, testAsyncHandler,
  locator.getDomainAuth ());
  
  The error indicates java.lang.NoClassDefFoundError: org/collaxa/thirdparty/json/JSONString
  
  I tried to search for it in google. But it seems that nobody had this error or maybe that nobody used it at all.
  
  Maybe I'm missing a jar file, but I can only find.
  
  
  Can someone help me in this please.

  Hello

  This kind of class not found errors come when you run from a client that does not all jar files required to call using the BPEL client API.

  org/collaxa/thirdparty/json/JSONString is orabpel - thirdparty.jar.

  The full list of Jar files, you would need in the classpath are:
  EJB.jar ($ORACLE_HOME/home/lib)
  OC4J - internal .jar ($ORACLE_HOME/home/lib)
  Optic.jar ($ORACLE_HOME/opmn/lib)
  ORABPEL-.jar ($ORACLE_HOME/bpel/lib)
  ORABPEL - thirdparty.jar ($ORACLE_HOME/bpel/lib)
  ORABPEL.jar ($ORACLE_HOME/bpel/lib)

  Hope this helps,
  Kind regards
  Yohanna.
  http://www.prshanmu.com/articles/

• LabVIEW executable not feasible using the asynchronous call

  Hello

  my project works very well from the source, but fails to run as an executable file. I was able to follow him to the asynchronous call of a VI.

  

  So far, I was able to solve the problem by using a queue dummy and loops in order to start the VI parallel to the rest of the code.

  I tried:

  1 mass recompile

  2. build the source distribution, remove existing build, create new

  3 allways include reminder all screws and all the screws called by reference via Server

  Always without success. I tried to hide the forum to find answers, but only found suggestion I already tried fail. Help, please

  So problem solved...

  Now it works.

  

  But I can't understand why and what was the problem.

• Hi I'm window7 user, I bought a creative cloud for students and teachers. but all the downloadable test app. That's why I tried 'buy now' button, "that assign the right to use" CC redownloading but "unlicensed" pop up. Help me.

  Hi I'm window7 user, I bought a creative cloud for students and teachers. but all the downloadable test app. That's why I tried 'buy now' button, "that assign the right to use" CC redownloading but "unlicensed" pop up. Help me.

  Hi decoen,.

  Your subscription is activate kindly try to disconnect from Creative Cloud app and reconnect.

  Please consult Creative Cloud applications unexpectedly back in the test mode. CCM, CS6

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  It could be useful!

  Rayyan

• Differenet BPEL instances write to the same file using FileAdapter

  Hello
  
  I want to write a file through BPEL using FileAdapter, but I don't want that whenever a new instance of BPEL is generated the new file is created.
  
  I want that all instances to write in the same 1 single file. Is this possible?
  
  How is that possible?
  
  Looking forward for your reply.
  
  Thank you

  Hello

  In the WSDL file for the adapter, go to the jca:operation element and add: Append = "true".
  at the end

  Kind regards

  Ketan

• SOapUI not get answer mock asynchronous bpel

  Hi all

  I created an asynchronous bpel process deployed to the local SOA server , using soap Ui 4.5.2 I created a false answer to tested the bpel that worked well.

  Now still when I deployed the same bpel in Oracle VM vortual box of SOA, server process

  BPEL is not the answer to the soap client... I get the following error...

  Can't access to the following endpoint: http://soabpm-VM:9001/Process1CallbackBinding/processResponse

  but above bpel returns response correctly to the soap ui client, if I deploy to the local server from Soa.

  I configured correctly the user interface of soup to get the wrong answer for bpel asynchronous by using the following link.

  http://www.Oracle.com/technetwork/articles/SOA/BPEL-Amadei-1518001.html

  Thaks in advance...

  Raj.

  Thanks Matthew,

  I changed the "http://localhost:8989/Process1CallbackBinding/processResponse.
  http://ltrthipireddy.keste.com:8989/Process1CallbackBinding/processResponse in Soapui ReplayTo(inside WS-A tab of Test Step Request),

  If localhost, it is the treatment of localhost machine linux inside the box of vm, so I gave my name of system he worked for me.

• Error initializing the asynchronous process

  Hi guys,.
  
  As suggested by several messages and items, process asynchronous is preferable because of its flexibility. I'm very happy with it until I have the following problem.
  
  We do fault handling on all our processes, using the hook and the policy fault. For an asynchronous process, we use another unmanaged code to return the fault. Recently, we noticed a problem. For some reason, every Sunday when the production BPEL server restarts, there are always a few BPEL process turned to retirement and offshore. We have already created a demand for service for it on metalink. But what causes another very serious issue:
  
  The calling BPEL instance sends a request to start the asynchronous process. As it is turned off and removed by accident, the initialization fails. But, as it is asynchronous, the calling process is not notified, which means that there is no fault raised to the calling process. This causes a lot of trouble because we are not notified of the problem. This was never a problem because we had not the process stops and withdraws before.
  
  This can be easily verified by a simple test case. Create a synchronous process a and process asynchronous B. leave a B invoke. Then turn off and retreat B. An instance can still be successfully executed without saying the problem calling B. If B is a synchronous process, a will always communicate a flaw in such situation.
  
  Of course, the domain log file records this ORABPEL-02106 problem. but we do not want to check the log file all the time and want to be notified when it arrives. Is it possible to catch this exception/fault in the appeal process?
  
  Thanks in advance!
  
  Steven
  
  Published by: sw12345 on July 26, 2010 09:41

  Aysnchronous by itself is supposed to be loosely coupled with the appellant. So the behavior you see is expected. BPEL persists the message invoke the message and Summoner of collection of discussions the message to process when the process is ready to pick it up.

  If you need to blame either visible by the appellant - you can disable this intermediate persistence of setting low configuration in bpel.xml of wedged.

  
  OFF.immediate
  

  -Sridhar

• Why TCP tunneling removes the 503 of the asynchronous call WS http response?

  Hi all
  
  I am facing a weird problem.
  I have developed and tested an asynchronous BPEL process which, among other things, invoke a 3rd party web service.
  It works very well in the development environment.
  When I migrates to the test environment for clients, I get an error http 503 in the BPEL process (the only difference in the BPEL code is WS endpoint).
  Try to understand what happened, I used a tunnel through TCP monitor. This solves the problem!
  
  So why go through a TCP control running using the BPEL server?
  Continuing with TCP monitor in production is obviously not an option, so not only that I have to understand why using a TCP my help, but also find a way to fix the underlying issue.
  
  I should mention that I use BPEL version 10.1.3.3, and I've tried the connection between the BPEL server and 3rd party web service and not a problem.
  
  Any help is very appreciated.
  Kind regards
  Aagaard
  
  Published by: Aagaard on March 23, 2009 09:48
  In Metalink in "TCP Tunneling the Oracle BPEL Process Manager" (283484.1 document id) it is proposed to change the ownership of the 'opt-SOAP-shortened' in the 'Manage BPEL domian"from false to true if you want to use TCP tunneling.
  I don't see this property in the BPEL console or in the domain.xml file in $ORACLE_HOME/bpel/areas / < used domain > / config.
  This would be part of the problem?
  The BPEL server in the customer test environment is a clone of the BPEL server in our development environment, so I don't see how this could be the problem.

  Just to think logically, he cannot be firewall as SOAP communicates vi the http remote server port. It has nothing to do with the installation of BPEL.

  19313 should be only one communication port.

  The main thing to look at is TCP LUN act as a proxy in some way? My understanding of the app is there's some monitors.

  Also when you test the browser have you disabled all proxies?

  As mentioned above the HTTP503 establishes a connection, but it is unable to complete for some reason such as timeout, which could have been caused, but load.

  see you soon
  James

• Start the asynchronous call brutal Typedef Bug

  There is a nasty bug which I think is the cause of many anomalies weird I see with the events of the user, like where some get fired and if I probe the refnum of the event on a VI that was launched using the asynchronous call node start I get some weird value for reference as 8450 or 5500 instead of some great typical integer. It is not also match the value that I get when I initialize the reference. This happens only intermittently, but I can reproduce the bug that I see on a smaller scale to a certain extent. This is not exactly the same as what I see in my current project, but I guarantee you both are related. Also, I'm pretty confident that this has to do with the help of LVlibs as well.

  So... to reproduce some questions:

  Unzip the attached code and open the project

  Open Main.vi. It is hard to see because it's pink, but notice the point of constraint on the node to call asynchronous start. This is provided at this point because I have a cluster of non-typedef in the connector pane, but a TD cluster plugged into it.

  Now open AsyncCall.vi

  Drag the eventcluster.ctl of the project on the façade of the asynccall.vi

  CTRL + x on the typedef cluster that has placed you on the front panel

  Select the non-typedef cluster by clicking it

  CTRL + v to replace the TD not cluster with the cluster of TD and save

  Return to main.vi, you will notice that the point of constraint does not go far.

  Open context-sensitive help and notice that the ctrl types match, but it's as if LV does not recognize it on the beginning of the node of the asynchronous call.

  Remove the node from asynchronous start call, then replace it. The cluster to the top wire. Voila, no point of constraint.

  Second question - same result but different method to get there.

  Now that you have components of connector typedef stress points and no more because you've taken the first steps of this 'exercise', remove the EventCluster.ctl from the library and record.

  WOAH, look the points of back strain, because node call asynchronous start still referencing the typedef cluster that he thinks that should be in the library. This can be seen by removing the cluster on main.vi and then right-click on the node to call asynchronous start on the side of the connector and creating a new constant of cluster

  It is creates a greyed out of control! Why? Well, we will reopen the context-sensitive help. Whadda you know, it's always looking for the control in Bug.lvlib that no longer exists.

  Now, the question that I'll have in my complete project that I can't post and can not reproduce on a smaller scale updates the typedef causes the dot of coercion. Otherwise I can't update my typedef cluster that contains all my events without going and replacing EVERY SINGLE launch async call node EVERY time I have add a new event.

  Major problem.

  Please let me know if these steps to reproduce were not clear or you have difficulties to reproduce the problem. I use LV2013 SP1. I opened the project in 2014 to see if it has been fixed in a later version, but I saw the same thing.

  I can repro with measurements of @GregFreeman and also confirm that I saw this same issue at least since the LV2012, but they have not reported it having not been able to provide a minimum test (thanks, @GregFreeman!) scenario

  For the record, it seems that the bug here, it is the spread of type sometimes makes an incorrect assumption / optimization as to if the conpane of the start the asynchronous call node must be updated when the source changes.

  A more obvious change - say, add/remove an entry, reverse order, or change data types altogether - always seems to spread properly.

  Incorrect optimization seems to be a terminal retains the same type of database, but transforms the type definitions - or, if the type definition is re-related or related outside a library owner.

  @GregFreeman watch the bug goes from non-typedef typedef, but it's actually worse in the other direction - when a link to a missing file is maintained.

  Call the asynchronous starting node seems to maintain a list of links that is distinct from that of the VI, and this list of links separated, this is what seems to not be properly invalidated. For example, in the screenshot, I illustrated example of Greg that the node generates no error in the compiler even after parenthood and rename the Typedef...

  

  ... even when we "Create Constant" on this terminal incriminated with list obsolete links, we get a compilation error. Since then, the grayed out type highlighted in the contextual help cannot be found, because 'Bug.lvlib:EventCluster.ctl' no longer exists, but the list of links separated from this node was not notified:

  

  It is worth noting that "Bug.lvlib:EventCluster.ctl" does not appear in the list of links of the VI at this stage.

  Often, no compiler error is generated after this failure occurs and as Greg reports, you could end up with undefined behavior (e.g. suspicious Refnums and events that seem to not fire not) (and I'll add it to this list a hearty portion of DAborts with diversion total number of messages).

  In addition, you * could * receive errors of cryptic linker for generations, but maybe not (the above screenshot, you'll notice I added two builds, neither of which seems to have a problem of building). (It seems that the broken link is travel with the distribution of the source, even if 'Disconnect the definitions of Type' is selected during the build process. That is why I believe anecdotally that node maintains a list of link separately the list of VI, and it's maybe part of the problem).

  It is noted that during this refactor (de-parent and rename) all screws and control remained open and in memory and all files have been saved. No funny business where LabVIEW would be unable to update links in a file that was not in memory.

  Another note - in the original example, all source files have been unifiles, and I can add anecdotal report this bug is much more insidious when separate compiled Code is active on the source files. In this case, the source may appear to be perfect - no point of constraint, no link expired - but the code that is currently running can be broken. In other words, what you see is not what you get, which makes debugging impossible. (This bug in particular is one of the few who makes "Cache of compiled clear objects" become a normal procedure controlled throughout the application development)

  Anyway, I wanted to draw attention to this issue, given that this thread is not yet associated with a CAR and it's a serious bug that generates a behavior undefined performance caused by a fairly normal refactor now has a well-characterized small repro case.

• path to vi the asynchronous call

  I'm trying to implement a splash screen that calls my main VI of asynchronously and displays messages during the charge of the VI.  Everything works fine in the development system, but it is not the case in EXE.  This is my first attempt to call a VI like that so I don't know that I'm missing something simple.

  See the image as an attachment.  The static reference points to a location on my server but I want to run the VI which is "Still included" in my EXE build, not the VI of the server.  The path of the VI comes back here is a combination of the path of the server and the location of generation, which is obviously not correct.

  What is really strange for me, it's that the main.vi is in fact running even if the path is incorrect.  The splash screen displays messages received from the hand, but when it is charged to the configuration settings, it fails because the vi path is c:\program files\tester\main.exe\z\labview\tester and it does not find my INI file.  How can I dynamically load this VI and even power give him my refnum of notification for my splash screen and return to the correct path of VI?  I tried to remove the path below property node and just add a constant path with main.vi as the value.  But it seems to get the path of the strict type reference (I understand is type only).

  

  I'd be willing to bet that your complete and complex application calls some VI who lives on the C drive, so to avoid any potential ambiguity, it uses the full path in the compiled (by chance) application, but on different drives. Your simple application probably calls subVIs that are only on the Z drive, so there is no possibility of confusion and it uses a shorter common path as a starting point.

• Synchronous and asynchronous BPEl process

  Hi all
  
  1. when we can create a synchronous bpel process
  
  2. when we create a synchronous bpel process
  
  3. when we can create empty bpel processes
  
  4. how to deploy a project using a script? with the example.
  
  Thanks in advance...

  4. how to deploy a project using a script?
  http://jianmingli.com/WP/?p=2584

  1. when we can create a synchronous bpel process
  Synchronous process must create in case if you expect the answer immediately.
  e.g. it is useful in case if you use a card database as partner link in the BPEL process. Because the data base of operation of the adapter used to give the answer immediately.

  2. when we can create asynchronous bpel process
  Asynchronous process must create in case if you when will come answer are not have limitation in time.
  Example:-assume that if you have a single loan process in which we are citing some of the webservices (ex-United Star ready, loan HDFC) who will send interest charges in its response, but in this case the answer can come at any time. Until that time there need to wait an indeterminate BPEL process. If the BPEL Sync process will be used in the above case, then the BPEL process will expire and which will report to the failed State.

  3. when we can create bpel processes empty
  Define the Service later: Select this option to create an empty BPEL process service component without activities.

• Failed to create the connection to the server application using jdev

  Hi"
  
  I'm unable to create the connection to the server using JDeveloper 10.1.3.1 version after "configuration Service 10.1.3.1.0 with 10.1.2 Oracle Internet application Identity
  
  Directory"I followed" Guide the administrator Oracle® BPEL Process Manager 10 g (10.1.3.1.0) "part number B28982-03".
  URL-> "http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#BABIBGFF".
  
  I was successfully able to integrate and capable "2.1.3.3 step 3: the Oracle Internet Directory test Configuration.
  
  But now when I try to establish a new connection to the application server with JDeveloper it gives below error.
  
  error: No process OC4J up AS instance identified by field: opmn oc4j_soa + oc4j-hostname-6003-default
  
  Please advice,
  
  Thank you
  Yatan
  
  Published by: Yatan on June 30, 2009 15:05

  What is the result of opmnctl status - app? You give the right opmn... other datails as and IS &?

• I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

  I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

  Check the liquid Indcator of Contact.

  Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

  Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

• How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/

  Setting up substitute again tab

  After installing this extension, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab override and click the Options button. (See first screenshot attached).

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Success?

  Once you have set it as you wish, you can close the Add-ons page (or use the back button to return to the list of Extensions of this Options page).