Error in the call to an asynchronous BPEL process

Similar Questions

• Synchronous and asynchronous BPEl process

  Hi all
  
  1. when we can create a synchronous bpel process
  
  2. when we create a synchronous bpel process
  
  3. when we can create empty bpel processes
  
  4. how to deploy a project using a script? with the example.
  
  Thanks in advance...

  4. how to deploy a project using a script?
  http://jianmingli.com/WP/?p=2584

  1. when we can create a synchronous bpel process
  Synchronous process must create in case if you expect the answer immediately.
  e.g. it is useful in case if you use a card database as partner link in the BPEL process. Because the data base of operation of the adapter used to give the answer immediately.

  2. when we can create asynchronous bpel process
  Asynchronous process must create in case if you when will come answer are not have limitation in time.
  Example:-assume that if you have a single loan process in which we are citing some of the webservices (ex-United Star ready, loan HDFC) who will send interest charges in its response, but in this case the answer can come at any time. Until that time there need to wait an indeterminate BPEL process. If the BPEL Sync process will be used in the above case, then the BPEL process will expire and which will report to the failed State.

  3. when we can create bpel processes empty
  Define the Service later: Select this option to create an empty BPEL process service component without activities.

• Error in the call to a procedure that is packed on another schema with the alias name

  Hi all
  
  I call a packaged procedure that has the type as a parameter collection that resides in the remote database by using synonyms.for which I am creating a synonym in my current schema.
  
  Below the package in the remote database:
  CREATE or REPLACE PACKAGE test_hlr BODY
  AS
  PROCEDURE raj_test)
  pi_username IN VARCHAR2,
  pi_serial_no IN arr_numb, - type of user-defined collection
  po_error_code OUT NUMBER
  )
  AS
  BEGIN
  BECAUSE me IN pi_serial_no. FIRST... pi_serial_no. LAST
  LOOP
  INSERT INTO hlr_raj
  (user_name, serial_no
  )
  VALUES (pi_username, pi_serial_no (i)
  );
  END LOOP;
  END;
  END;
  
  
  
  I'm create synonym of package in my current database and call this package synonymous as shown below
  
  create synonym ram_test for ram_test@dblink
  
  CREATE or REPLACE PACKAGE test_bnr BODY
  AS
  
  PROCEDURE ram_test)
  pi_username1 IN VARCHAR2,
  pi_serial_no1 IN arr_numb, - type of user-defined collection
  po_error_code OUT NUMBER
  )
  AS
  
  BEGIN
  test_hlr.raj_test (pi_username = > pi_username1,)
  pi_serial_no = > pi_serial_no1,
  po_error_code = > po_error_code
  );
  END;
  END;
  
  When compiling above package am getting error below
  PLS-00306: wrong number or types of arguments in the call to ' RAJ_TEST
  
  
  If I remove the collection type and use types of primitive data and then do not get error.
  
  Please give suggestions, about the same.
  
  Kind regards
  Sri Ram.

  There is no need to declare the type arr_numb locally. In fact, two types with exact same statement and namesake are not the same type. Each type has a unique OID. You can specify own OID. Then you can create the types the and remote with same OID. But if the type is the type of PL/SQL it didn't need to. For example. ON remote DB:

  create or replace
    package pkg1
      as
        type arr_numb is table of number;
        procedure p1(
                     p_numb_arr IN arr_numb,
                     p_sum OUT number
                    );
  end;
  /
  create or replace
    package body pkg1
      as
        procedure p1(
                     p_numb_arr IN arr_numb,
                     p_sum OUT number
                    )
          is
          begin
              for i in 1..p_numb_arr.count loop
                p_sum := nvl(p_sum,0) + p_numb_arr(i);
              end loop;
        end;
  end;
  /
  

  Now locally:

  set serveroutput on
  declare
      v_numb_arr pkg1.arr_numb@sol10;
      v_sum number;
  begin
      v_numb_arr := pkg1.arr_numb@sol10(1,2,3,4,5,6,7,8,9);
      pkg1.p1@sol10(v_numb_arr,v_sum);
      dbms_output.put_line(v_sum);
  end;
  /
  45
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  SY.

• Loading the XML file inside a Bpel process

  Hello
  I have a bpel process in which I read an xml file that is in the MDS, in this xml file I find information if certain values, so my question is if, every time I execute the command to search for the information contained in the XMLFile step open the file?
  I use the following sentence:
  oraext:Lookup-XML('oramds:/apps/Fer_Common/XML/Error.XML','/errorCodes/ErrorCode','name','value',bpws:getVariableData('Variable_2'))
  
  Is it possible to load only once in the first call of bpel process?, I mean, I don't want to load the file whenever I need to read something from the xml.
  Concerning
  Yuri

  Hello
  DVMs are also accessible from the BPEL. You can create an assign activity, and in the expression builder, you have a set of functions called features DVM. You can use these functions to search in the DS.
  You can also use the same functions in the transformations.

• Error on the Apex 5.0.1 installation process. Oracle 11.2.0.1.0 Linux 64-bit

  Hello! I install Apex 5.0.1 on my Oracle DB 11.2.0.1.0 64-bit Linux OS, following the: Application Express installation and configure Embedded PL/SQL Gateway but there is a problem when I try to run the @apex_epg_config.sql. I would be grateful if someone can help me

  SQL> @apex_epg_config.sql /home/oracle
  
  PL/SQL procedure successfully completed.
  PL/SQL procedure successfully completed.
  PL/SQL procedure successfully completed.
  PL/SQL procedure successfully completed.
  
  . Loading images directory: /home/oracle/apex/images
  Directory created.
  
  declare
  *
  ERROR at line 1:
  ORA-29903: error in executing ODCIIndexFetch() routine
  ORA-31001: Invalid resource handle or path name ""
  ORA-06512: at line 39
  
  begin
  *
  ERROR at line 1:
  ORA-29903: error in executing ODCIIndexFetch() routine
  ORA-31001: Invalid resource handle or path name ""
  ORA-06512: at line 2
  
  declare
  *
  ERROR at line 1:
  ORA-29903: error in executing ODCIIndexFetch() routine
  ORA-31001: Invalid resource handle or path name ""
  ORA-06512: at line 6
  ORA-06512: at line 57
  
  Commit complete.
  
  Directory dropped.
  
  timing for: Load Images
  Elapsed: 00:00:00.13
  PL/SQL procedure successfully completed.
  Commit complete.
  
  SQL> 
  

  Hello!

  The s/n of my company's it. There was an error on the configuration of the ACL. He made the resettlement of the installation of all the ACLs and Apex worked right.

  Thak you all!

• Get the name of the attachment and the e-mail address in bpel process

  Hi all

  I use UMS adapter to query mail servers and get the attachment and save it to the local disk.

  In the payload of the UMS adapter I get href of the accessory, but I'm not able to understand as to how to get the name of an attachment and the address of a mail in my Bpel process.

  Please guide me to make them.

  Thanks in advance

  Samreth

  1 double click on your composite receive activity.

  2. go in the Properties tab of your activity.

  3. click on ' + '.

  4 window that appears, scroll down and select "jca.ums.from" and store it in some variable say fromAddress (ensure, before adding this property u create variable string fromAddress).

  5. click on OK.

  6. in the same way add property to ' jca.ums.msg.content - description "drop down and assing it to a variable.

  you're good to go.

  I hope this helps.

  Kind regards

  Karan

  Oracle Fusion Middleware Blog

• Error executing the call of duty 2 (entry point not found) how to fix?

  When I try to run Call Of Duty 2 it pops up an error that says:

  "The procedure entry point _except_handler4_common could not be found in the dynamic link library msvcrt.dll."
  Please help me

  Hey Abdul MannanZU,

  ·         What version of Visual C++ is installed on your computer?

  ·         Did you do changes on the computer before the show?

  ·         Is a 32-bit OS or 64-bit?

  You can uninstall the Package redistributable Microsoft Visual C++ Runtime from Add / Remove programs and reinstall again. Later, check to see if the problem persists.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Download anyone of the Microsoft Visual C++ following your 32-bit or 64-bit operating system that you use:

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

   

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  Let us know if that helps.

• Digital or value error during the call to JTF_NOTE_PUB.

  Hi all
  
  I get this quite annoying error when you use OracleCallableStatement object to call the JTF_NOTE_PUB api.
  
  The error is ORA-06502: PL/SQL: digital error or value.
  
  If I replace the bind: 10 with some static, it works fine. My number is 962, which also is the value in the incidentId variable.
  
  My code is as follows:
  

  public void createWorkbenchNote(String userId, String respId, String respApplId, String note, String noteDetail, String incidentId) 
    {
      OracleCallableStatement cs = null;
      OADBTransaction txn = getOADBTransaction();
      
      try 
      {
        //Bind :1       = userId
        //Bind :2       = respId
        //Bind :3       = respApplId
        //Bind :4       = note
        //Bind :5       = noteDetail
        //Bind :10      = incidentId
        //Bind :7       = out l_return_status
        //Bind :8       = out l_msg_count
        //Bind :9       = out l_msg_data
        //Bind :6      = out new note id
      
        String sql = 
          "begin" +
          " FND_GLOBAL.APPS_INITIALIZE(:1, :2, :3);" +  
          " JTF_NOTES_PUB.CREATE_NOTE(  P_API_VERSION             => 1.0," +
          "                             P_INIT_MSG_LIST           => 'T'," +
          "                             P_COMMIT                  => 'T'," +
          "                             P_JTF_NOTE_ID             => null," +
          "                             P_VALIDATION_LEVEL        => 100," +
          "                             P_SOURCE_OBJECT_ID        => :10," +
          "                             P_SOURCE_OBJECT_CODE      => 'SR'," +
          "                             P_NOTES                   => :4," +
          "                             P_NOTES_DETAIL            => :5," +
          "                             P_ENTERED_BY              => :1," +
          "                             P_ENTERED_DATE            => TRUNC(sysdate)," +
          "                             P_LAST_UPDATE_DATE        => TRUNC(sysdate)," +
          "                             P_LAST_UPDATED_BY         => :1," +
          "                             P_CREATION_DATE           => TRUNC(sysdate)," +
          "                             P_CREATED_BY              => :1," +
          "                             P_LAST_UPDATE_LOGIN       => FND_GLOBAL.LOGIN_ID," +
          "                             P_NOTE_TYPE               => 'CS_TECH_HANDLER'," +
          "                             P_NOTE_STATUS             => 'I'," +
          "                             X_JTF_NOTE_ID             => :6," +
          "                             X_RETURN_STATUS           => :7," +
          "                             X_MSG_COUNT               => :8," +
          "                             X_MSG_DATA                => :9);" +
          "end;";
  
        String returnStatus = "";
        int returnMsgCount = 0;
        String returnMsgData = "";
        int returnNewNoteId = 0;
  
        Number newIncidentNumber = null;
  
        cs = (OracleCallableStatement)txn.createCallableStatement(sql, 1);
  
        cs.setInt(1, Integer.parseInt(userId));
        cs.setInt(2, Integer.parseInt(respId));
        cs.setInt(3, Integer.parseInt(respApplId));
        cs.setString(4, note);
        cs.setString(5, noteDetail);
        cs.setInt(10, Integer.parseInt(incidentId));
        cs.registerOutParameter(6, Types.NUMERIC);
  
        cs.registerOutParameter(7, Types.VARCHAR, 0, 1);
        cs.registerOutParameter(8, Types.NUMERIC);
        cs.registerOutParameter(9, Types.VARCHAR, 0, 2000);
  
        cs.execute();
  
        returnStatus = cs.getString(7);
        returnMsgCount = cs.getInt(8);
        returnMsgData = cs.getString(9);
        returnNewNoteId = cs.getInt(6);
        cs.close();
  
        if (!("S".equals(returnStatus))) 
        {
          throw new OAException(returnMsgData);
        }
      } catch (SQLException e) 
      {      
        String errorMessage = e.getMessage();
        throw new OAException(errorMessage);
      }
    }

  Thank you in advance.
  
  Kenneth

  Kenneth

  Instead of calling the API directly. I will suggest you to create a wrapper on API and call this wrapper.

  Thank you
  -Anil

• not able to get the response of an async bpel process

  How to get the answer of async bpel

  What DO YOU call the ASYNC SERVICE. USE INVOKE TO CALL AND USE A RECEIVE ACTIVITY TO RECEIVE THE RESPONSE.

  should work...

• Please help me error on the ePrint on window8.1 installation process

  I try to install on my Surface3 OS window8.1 ePrint, but finally the ERROR I don't know what is happening and how to solve the problem. Please help me.

  

  Hey @Screamo_off,

  Welcome to the Forum from HP Support.

  I understand that you are unable to install the HP ePrint app on your Windows 8.1 Surface.  I would like to help.

  What model of HP printer work?

  If your printer is connected to the Internet and compatible ePrint you might find this approach for Surface printing works. EPrint application is not compatible with the Surface, still, if you click here you can access steps to activate ePrint and learn how to use the ePrint via e-mail method.

  Let me know what printer you have, and if you have any other questions I can give you a more detailed account of all the ways that you can print with your combination of device.  Finally, click here to learn how to scan using the HP AIO remote.

  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Have a great day!

• The asynchronous BPEL using SoapUI5.2.1 test error.

  Hello

  I followed all the steps mentioned in

  Unit Testing asynchronous BPEL process using soapUI

  But I am getting error in the EM console below

  Anomaly of the non-recoverable system:

  " < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns =" http://schemas.Oracle.com/BPEL/extension "> < a name ="summary"part > < summary > oracle.fabric.common.FabricInvocationException: cannot call endpoint URI" http://localhost:9898/BPELProcess1CallbackBinding/processResponse "successfully due to: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect < / summary > < / piece > < part name ="details"> < detail > impossible to invoke endpoint URI" http://localhost:9898/BPELProcess1CallbackBinding/processResponse "successfully due to" ". : javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: Connection refused: connect < / detail > < / piece > < part name = "code" > < null code > < / code > < / piece > < / remoteFault > < / bpelFault >

  
  

  Can someone help me please. I do this first time and don't know where to look

  
  

  Thanks in advance,

  Shub
  

  In SOAPUI, what window you run the test?

  Make sure that you run the unit test of the window "TestCase1. Figure 14, the article quotes of Ref.

  Do not run any Test steps-> Request1 process window.

• Procedural error the call for VARRAY String as parameter

  Hello

  I get the error during the call to the procedure:

  Here are the steps:

  CREATE or REPLACE TYPE PART_TYPE IS an OBJECT (part_number VARCHAR2 (120));

  CREATE OR REPLACE TYPE PART_REC_TBL IS VARRAY (1000) of PART_TYPE ;

  I have a stored procedure in the package:

  create or replace package TEST_PART_SEARCH_PKG AUTHID CURRENT_USER AS

  PROCEDURE ADD_TO_PART)

  p_part_number_list IN PART_REC_TBL ,

  p_ord_number IN Varchar2,

  x_error_flag OUT Varchar2,

  x_error_msg OUT Varchar2

  );

  end TEST_PART_SEARCH_PKG;

  When I call the Package:

  DECLARE

  v_flag varchar2 (100);

  v_err_msg varchar2 (100);

  BEGIN

  TEST_PART_SEARCH_PKG. ADD_TO_PART ('09031518,0897701 ',' 003146M 56', v_flag, v_err_msg);

  END;

  error report-

  ORA-06550: line 5, column 6:

  PLS-00306: wrong number or types of arguments in the call to 'ADD_TO_PART '.

  ORA-06550: line 5, column 6:

  PL/SQL: Statement ignored

  It would be helpful if someone can help me on this

  Obviously. There are no part_number, so turn in your package and get rid of it:

  FOR indx1 IN 1.p_lot_number_list. COUNTY

  LOOP

  BEGIN

  SELECT

  inventory_item_id

  IN

  var_item_id

  Of

  test_part_number_v

  WHERE

  PART_NUMBER = p_part_number_list (indx1);

  EXCEPTION

  WHILE OTHERS THEN

  var_item_id: = NULL;

  END;

  SY.

• The synchronous BPEL process HelloWorld deploy Time Error

  Hi all
  
  I am a newbie. created a helloworld synchronization. BPEL process.
  
  There is no error in compilation. but get the error while deploying the jar file on server bpel process. The error message is:
  
  "
  Deploy the new BPEL process
  
  bpel_SyncHelloWorldBpel_v2009_09_01__50895.jar failed to deploy.
  Error loading process. The field of process encountered the following errors when loading the "SyncHelloWorldBpel" ("v2009_09_01__50895" revision) process: null. If you installed a hotfix on the server, verify that the ownership of the bpelcClasspath domain includes patch classes.
  
  "
  
  Note: I have not installed patches on the server.
  
  Please let me know the reason for this error.
  
  -Irfan Khan

  10133 and 10134 versions, Oracle said that the version of designer (JDeveloper) BPEL that matches/certified with the version of the runtime (SOA Suite BPEL PM) BPEL. I suggest you upgrade your BPEL PM to 10135 or use JDev 10131.

• Tracking records of only error Batch file in the BPEL process

  Hello
  
  I'm reading file of 1,000 records from the file adapter and debatching in two instance of each 500 folders. And with the help of written appeal insert in the database operation.
  
  The first batch of 500 cases with success and entered in the database table custom.
  
  The second series of 500 records created WARNING instance with an error message and nothing is written to the database in the second series.
  The error is due to erroneous data in a line in the second series of 500 records. Because of this error in row, the 499 left rejected and nothing of the second series is inserted into the database.
  
  We do not have control over the only document of the second set (500records) and BPEL process should write to remaining 499 files of database.
  
  Please help me on this issue. It would be very useful. Thank you inadvance.
  
  Waiting for your answers.
  
  Thank you.
  
  Published by: PraveenT2 on May 13, 2009 04:27

  Can you just clarify something for me.

  The first test has worked perfect, correct?

  The second test took the expected result, for example 3 valid lines have been correctly loaded. The issue was that the release manager behaves as expected. You expect to see a single line in the file for rejection.

  see you soon
  James

• Reading file and dump the data into the database using BPEL process

  I have to read the CSV file and insert data into the database... To do this, I created some asynchronous bpel process. Adapter filed added and associated with the receive activity... Adapter DB has added and associated with the Invoke activity. Receive two total activity are available in the process when trying to Test em, receive only the first activity is complete and awaits the second receive activity. Please suggest how to proceed with...

  Thanks, Maury.

  Hi Maury,

  There is no need in step 2 that u mentioned above. I donot find useless a webservice?

  The process will be launched by the CSV file, then using the processing activity, you can put it in the DB.

  There should be no way where you can manually test it by giving an entry. All you can do to test is to put the file in the folder you mentioned when configuring the file adapter.

  You just need to have the composite as below:

  ReadCSVFile---> BPEL--> DB adapter

  And in your BPEL process:

  Recieve--> Transformation activity--> call activity

  Try to work on some samples listed on the oracle site and go through the below URL:

  The playback of the file adapter feature using

  Thank you

  Deepak.