The audio files are locked after their transfer from PC to MP3 and phone

Similar Questions

• Whenever I start the system complains that the following files are missing, c:\\Windows\System32\igfxpers.exe, igftray.exe and hkcmd.exe.

  Original title: files missing error

  Whenever I start the system complains that the following files are missing, c:\\Windows\System32\igfxpers.exe, igftray.exe and hkcmd.exe. Everything started after I ran scan and scan deleted some files infected. However, I can use the system. Where and how to download the missing files? Or how the system does not deliver messages?

  Simon

  Two of the three files are probably part of the malware infection and not the files infected. The third is probably the same details in this link:
  http://www.Runscanner.NET/file/Hkcmd.exe.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig. You will find the three points and they will have a description 'file is missing' against everyone. Your antivirus software has removed the files, but not the startup entries in the registry. All you need to do is delete the entry using Autoruns to eliminate the error messages.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• The audio files are out of sync with video clock?

  I record an audio book with premiere pro 2014, is therefore a larger file, then Adobe switched me to first pro 2015 and now it says that my audio files are out of sync from the video clock. I realize Adobe has no technical support so I googled a cure. They told me to remove CC 2015 and reinstall CC 2014. Of course, Adobe's download anything over three days old extremely difficult unless you are following specific steps that are simply in place to harass. Try as I could, download CC 2014 cannot be done. My question is this: How can I re - sync my files using only CC 2015? What is the best way?

  * UPDATE. Problem found! It turns out that when I opened my task manager my CPU or central processing unit, was filled to 99%. I just had to uninstall some programs needed and things much better brought.

• How can I know what these mysterious "bought" the audio files are in my list of music songs?

  Hello

  It is strange - never, I remember buying these songs that appear on my list of music songs. (I click 'genre' of the bar of the high sorting option and see a bunch of "purchased AAC audio file" s).

  How could they got there?

  How will I know if they are free or not free files, I can be charged for without my awareness?

  How can I configure iTunes to never make purchases for me without my permission explicit, free or not?

  Please answer these questions, I appreciate it!

  iTunes cannot make purchases without your approval.

  The list of your purchases and free downloads is available in iTunes Info section account. Below you will find instructions on how to get there.

  See your purchase history in iTunes on Mac or PC - Apple Support store

• Project imported from another computer, the audio files are jumping or any waveform?

  Hey everybody,

  I import a project from another version to date of first Pro CC 2014, it was working fine on another computer but on import some audio in the order and in the source monitor are jump or play just back all choppy as a bad CD. Some audio in the Control Panel Assembly have no waveform. I tried to replace some, that works, but there are a LOT of audio to replace and I'm not 100% sure those who read evil or of the previous editor.

  I visited, re-rendering, clear cache and it always does. I'm not sure what is the problem. Also sometimes when I try to make the entire project for the preview, it gives me 'cannot compile the film' unknown error.

  Any advice/help would be appreciated. Thank you!

  Pense thought to it, here's what I did in the case where someone has a similar problem - had to remove manually everything in the 'Clean' media Cache files did not really work. Am entered and removed everything for re - conform files, worked for some files, but not all. Turns out that on the other drive, there were some PEK and CFA project hidden files in this local disk. I searched .cfa files both .pek and all removed so first can regenerate new ones.  Things work now

• Clicking or stutter during playback of the audio file on Sansa Clip

  I'm having a problem similar to that described in the following thread:

  http://forums.SanDisk.com/Sansa/board/message?board.ID=sansafuse&message.ID=2785&query.ID=219379#M2785

  Only I have the problem on a 4 GB Sansa Clip.

  The audio file is a DRM WMA to NetLibrary, 165MB, 32 Kbps and 11:48:01 in length.

  I am currently at 05:21 mark in the file and the stuttering arrived at a point where it is difficult to listen to the file.

  I had filled the files of devices (especially the music, a few podcasts) and then deleted, filled again, etc., so there may be some fragmentation that is either the problem.

  I'm reformatting of the clip using the internal format of the device function and allows you to copy only the audio book on the device at the beginning to see if the problem goes away (this * should * minimise, if not eliminate the fragmentation).  Then I resync the rest of the music files to the player using Windows Media Player, and then see if the problem comes back.

  I'll post my results here.

  Reformat the device worked very well.  The audio file sounds fine and the file is read immediately when you rewind or fast forward through the file (before it should pause a few seconds once you wanted to before play).

• What happens to the audio cd after the cda file are converted to mp3 format? Only the original cd remains unchanged?

  What happens to the audio cd after the cda file are converted to mp3 format? Only the original cd remains unchanged?

  She remains totally unchanged, regardless of how many times it is loaded in the computer.

• where are the audio files stored during recording as a project?

  Where are the audio files stored during recording as a project. The project opens fine on my computer, but when I move to another computer I have missing audio files.

  They are stored in their own folder in the project folder:

  

  So if you want to move it to another computer, you must copy the project folder, not only of the project folder.

• The files appear even after their removal

  Original title: Delete files on my desktop...

  I currently have Windows 7 on my desktop.  I went to my favorite a organize and delete some research that I saved, only to find that they are not deleted.  The next day I went back to find that all the elders have sought in my favorites.  The same thing happened when I went through my photo folders to organize and remove some picutres.  I found the new folders that I created and old photos, I had tried to delete as well.  I'm at a loss as to what's happening... Help!

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  The files appear even after their removal.

  The user account may be damaged.

  I suggest you follow the steps mentioned below:

  Method 1: Safe Mode

   

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  See the site:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 2: New user account

   

  See the site:

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.

  Original title: Program Files gone?

  Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts.  I went into Program Files and discovered the entire file completely empty.  The computer says to run chkdsk b/c the program files are corrupted.  When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk.  When I reboot, the chkdsk never runs.

  My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system.  Can you help me?

  I am running Microsoft XP.

  Sorry to hear that you are having problems with your XP system.  For XP support please visit the link below
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General

  Also, try to start the computer in Mode safe.
  When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.

  Sounds like something important happened (corruption).  If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.

  Good luck

• The backup files are smaller in size after ACS ACS 5.2 to 5.3

  After ACS upgrade from 5.2 to 5.3 we have noticed that the backup files are significantly smaller in size. They were for example before the upgrade:

  285633099 2011-10-23 22:01 Meduza-ACS-111023 - 2200.tar.gpg

  285809254 2011-10-24 22:01 Meduza-ACS-111024 - 2200.tar.gpg

  And after the upgrade:

  124234429 2011-10-25 22:00 Meduza-ACS-111025 - 2200.tar.gpg

  124234425 2011-10-26 22:00 Meduza-ACS-111026 - 2200.tar.gpg

  What could cause this behavior?

  How can we be sure if the backup files have been regular after the upgrade?

  So what I wrote is true, but does not apply in your case

  I think that there are also a few corrections that reduce the size of the transactions table. GST files relate to records associated with configuration changes and manage notification of these secondary changes, and run-time components. Transactions are stored in the configuration database, but contain no configuration data.

  5.2 what they have not well cleaned and it has improved to the point 5.3.

  Impossible to find all the CDETS at the moment, but here's an example;

  CSCth78269 Table ACSTRANSACTIONS is not properly cleaned during bulk operations

  As you can see it before the upgrade that the size of your backup file has been more and once the size of constant upgrade

  I think you should be good. Only way to confirm 100% is to restore data

• Virtually all of the files are missing after you import the catalog.

  I'm NOT sure that has nothing to do with lightroom, except that yesterday my files were all there, now, they are absent.  It could be a hard disk failure.  Its just strange that it affected only the files that I tried to interfere in my lightroom catalog today.

  Well as out of town, I pulled a few thousand photos and them ingested on a daily basis in a new lightroom catalog that I created on my laptop.  Files imported into a USB external drive.  The laptop is win 10.  It is on the latest version of lightroom, CC.  Yesterday, everything was going well with the catalog, disk, and files.  All were there.  The catalogue and the photos were on the same drive.  The laptop was listed as the letter 'g ':

  Once I went back to the office today, I wanted to import pictures to my largest catalog on my desktop.  I have used this external hard drive for all my new photos in 2016.  On this PC, Win 10, the letter of the external drive is also "X:".  I started lightroom in my big catalogue very well.  I chose to import from a different catalog, accessed my X Catalogue outside in the car and started importing without a copy of the files.  This should leave the files in the same location.  It took a little more time I expected to import this catalog.  When I went to the structure of folders inside lightroom, it seemed that all the files have been imported correctly.  But there was a "?" from the folder.  I assumed that I just needed to do a "find" on the X drive as I thought that my lightroom catalog could have been pointing to the G drive.  Locate, but cannot find the files.  I've used windows explore to browse my files and the folders and files were all missing, with the exception of a folder where I shot some photos with a camera, about 100 photos in all.  Thousands of photos from other cameras were all absent.

  So next time, I ran a scan disk and windows came with a message of repair.  The repair said that it worked successfully.  But I looked in the Explorer, the files were still missing.  I ran a scan disk again and no error found.

  I looked in the trash on the desktop and there is no files on this disc.  If the missing files are still missing.  I had not saved the files yet since they were really vacation photos and have no critical and since I was going to save them after that I spent in review on the workstation.  Some are still on the cards and could be retrieved.  But I formatted my main map at least a couple of times and I'm afraid that most would have been crushed and is more viable, even using the card recovery software.

  Before you begin importing today, I don't check the disk to make sure that all my files were there.  There is no error in windows at startup and I don't mind just to check in Explorer or open the 'new' catalog first.

  1. Could Lightroom have somehow deleted files and can they be retrieved?
  2. Assuming that it was a Windows / hard drive error, can anyone recommend a program attempt to recover files lost like that?  Given that the entire folders, sound also lack if the index of the obtained partially erased disc.  But maybe the files are still there.  Then there is a program to search for them?

  Note that the other files on this drive all seem to be good.  The only missing are import of today.

  It is drive X:, but the files are not there.
  portable version is 2015.6

  Desktop version is 2015.5

  The

  Somehow, the windows removed them.  I use EaseUS data recovery to retrieve them.  He had no problem finding the files.  So I guess we can mark this resolved.

  Thank you.

• error on AppsTier YES the cloning of the files are notfound to their intended location

  Hi all
  
  Oracle apps 11.5.9 DB 9i windows 2003 version
  
  I ran with success all the preclone steps and copied all of the files required on the target system
  Cloning of my dbTier is successfully done
  
  now when I do cloning adcfgclone.pl appsTier gives the error below
  
  Error: The YES files are not stored in their expected location. Please ensure that the correction YES has been correctly applied. Patch must be decompressed directly to the ORACLE_HOME to the root level, so that
  /oui21/Oui/Lin/OraInstaller.jar < iAS ORACLE_HOME > exists.
  Restart adclone, pl permorming required corrections.
  
  I looked on the forum and the net but found nothing, I asked the patch number 5035661 on appsTier still the same error
  dbTier was appsTier successful ending by above error can any 1 Please help me thank you
  
  Hassan

  just one last request, how can I check if this patch was applied to the instance of apps or not.

  Oracle Universal Installer (YES) [ID 458893.1] FAQ - How to find the version of the installed YES?

  Thank you
  Hussein

• If the Photos are not Visible after their exportation from Photos for Mac

  Export of Photos may write JPGs invisible on the disc, if the photos are exported with the option ' file name: use the title.

  If the first affected user a title to the picture, the deleted the title text, photography will have an empty title and the exported photos will be simply named ".jpg" and treated as invisible system files.  This bug can fill the disk with lots of image files, which are not visible in the Finder, unless the hidden files are made visible.

  User bikedaveca reported this bug today:

  See discussion: exported photos do not appear in the Finder

  More in this tip of the user:

  Bug: export of Images with "file name: U title" exports the files as Invisible, if the title has been deleted

  As a precaution, keep at least one printable character in the title field, when when you remove a title from a photo, so you can see, she had a given title.

  As a test, import three new pictures, for example:

  

  The first has a title, the other had a title, but removed, the third one never had a title and watch "Untitled."

  When I select and export them with ' file name: use Title ", only two photos will be displayed in the Finder.

  The problem is, that deleting a title does not remove the title, but adds an empty title. If the photos are exported with the filename ".jpg".

  

• Options for adjusting the audio files on several scens

  Hi all.

  I just did a search for information on this question but couldn't fine anything specific to what I'm looking for. If there is already a thread that deals with this issue please feel free to point me in that direction.

  I use flash cc. I have a .fla with 8 scenes (apparently I shouldn't use scenes as they are outdated now, but I find it more practical to scroll through thousands of images and test only small portions of the video together. "I just saw something combining .fla smaller and separate files so maybe next time, I'll try).  I have a lot of sound files embedded throughout these different scenes, each of them worth 'stream '.  There are a lot of voiceover and synchronization of the lips of character during several different layers.  So far, the time is fine and playback is fine on all scenes.

  However, a friend who helps me with the said sound individual files need a lot of work (i.e. to change the volume (and perhaps EQ)) for some of them.  I could go back through each layer/instance and the volume individually but that the process takes time and, for some of them, the volume is already contributed to the maximum in the envelope and yet they need to be stronger (or doctored EQ), which means that their manipulation in hearing and then re - insert back into the time line.

  This is my basic solution I want to fall back on if there is no other choice for a faster process. All audio files are .mp3 or .ogg.  Ideally, what I'd like is a way to extract all the sound elements of the .fla, (while maintaining the timing of each file compared to the other), in hearing as a session multitrack so that individual files can be modified accordingly and then reinserted back into the .fla and when is not affected.

  Something tells me that is not particularly realistic depending on how flash works with scenes.  I've only worked with flash for about 5 weeks, so my experience is quite limited.  Any suggestions on how to make this task easier, even if only a little?

  Oh, it's another solution, that someone suggested that, rather than insert the file itself in the line of time (from the library) I could insert a bit of actionscript code that points to the location of the file.  This way I could load all the files in audition manipulate them, then save them with the location where the points of actionscript and the timeline would automatically update accordingly.   I don't know if this is a solution for my situation even though I understand actionscript is very versatile in this way.   However, I also read that actionscript can confuse the calendar sync sound/animation on several stages, when it is piled up all together at the time of publication.  Any ideas?

  Thank you

  There is nothing wrong with scenes, they are very useful at the same time. People who say do not use maybe never had cases that show the utility they are.

  If you use the stream for the lip sync, you should have stayed with WAV, which is much easier to manipulate than the MP3.

  External MP3 with the code reading would have been almost impossible lip sync.

  The fastest solution would be if you had external files you imported originally, then you could take those by hearing and import new files to the library, to replace those who was there.

  If you do not have the external sound files original there is a trick that you can do. Go into every scene and make an orders/convert to other Document Formats/HTML5 Canvas. A little whim of the converter is that it converts the level you are and any FLA (unless you happen to the next level.) I hope that you will get this scene as a HTML5 Canvas in Florida you can then do a test movie, and it will publish to all the sounds in a folder, ready for Audition. You can find the file names have changes, and you need resolve names before you import the new sounds into the AS3 FLA, give them correctly.

  If that sounds intimidating, install Flash Pro CS6, what you can do on the part of previous Versions of the CC/Apps tab. CS6 you can right-click on each sound in the library and edit it in the hearing. Unfortunately, this requires hearing 9.0, which you would also need to install the previous Version of CC/Apps (and it will overwrite your current version). I ee who's here is 9.2.0, which I think might work.

  So, to find the sound files original would be the easiest way, and moving by HTML5 Canvas might work more easy to reinstall CS6 and hearing 9.2.0.