The backup feature has stopped working on Vista

Similar Questions

• The dictation feature has stopped working with apple applications

  Dictation function simply ceased to function on the iPhone 6, OS 9.0. I have since updated to 9.3.2 in hopes of a solution isn't work. I did so that Siri is turned on and the microphone of keyboard is also. I also powered power and I did soft reboots. It does appear that effect the apple applications. Function of dictation with other applications like google work very well (thus, the microphone does not work).

  Are there suggestions more to get the dictation function to work with apple applications?

  Hello

  Try checking the following parameters:

  • Settings > general > keyboard - make sure activate dictated is open.
  • Settings > general > Restrictions - check that the restriction of Siri & dictation is not enabled
  • Settings > general > Siri - disable, pause for a few moments, and then reactivate the Siri.

• My option "open in a new tab in the same window" has stopped working.

  After working for centuries without any problem, my option "open in a new tab in the same window" has stopped working.  Support suggested that I go to tools, select internet options and open tabs, and then select open in a new tab in the same window option.  I did as instructed and concluded that this option under the tabs was already selected and unchanged.  I changed this option, closed my browser and restarted my computer as instructed.

  As before you follow these instructions, and when viewing online and wish to open a link in a new tab in the same window I once again this desired option.   Internet does not take into account my instructions and opens my link in a new window.  This is extremely irritating.

  Does anyone have a solution?

  Hello

  What version of Internet Explorer work?

  You can try the following steps and check:

  Method 1:

  You can reset Internet Explorer 9 settings and check

  http://Windows.Microsoft.com/en-in/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Important note: ignore in place update from the above mentioned link.

• Why my Catalyst Center: the host application has stopped working?

  When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?

  Hi Missy,

  This probably isn't a problem MSE or malware.  It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.

  This just started recently - as the last day or more?  If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

  Good luck!

  Kosh

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• The program executable has stopped working

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with... of programs a SSC downloaded for smpt installation
  • Error messages. the program executable has stopped working... a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
  • Recent changes to your computer. None
  • What you have already tried to fix the problem.no I don't know what to do

  Confirmed that the program is compatible with your version of Vista and the hardware in your computer? http://www.microsoft.com/windows/compatibility/windows-vista/.

  You can try to uninstall the program, download a clean copy (in case where the original has been altered) and re - install the new download and then see if the program works.  If this does not help, try right-clicking on the executable and click on run as administrator and see if that makes a difference.

  I hope this helps.  If this isn't the case, follow the advice implied by Malke response and contact technical support by the manufacturer of software for assistance.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

  Original title: left click not working not not on HP laptop

  On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

  Hi cyrilmillot,

  You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

  See the link to Adobe to download the removal tool:

  Adobe Reader/Acrobat removal tool

  After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

  Adobe forums

  http://helpx.Adobe.com/support/

  If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

  HP support

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• Satellite L500D-144 - CCC of the host Application has stopped working

  Ladies and gentlemen,

  My PSLT6E - 007004GR is almost a year.
  This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
  Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

  A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
  Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  Is it reproducible.

  Have already reported more customers or I'm the first?

  What can you do to the problem?

  Sincerely,

  CBluebaerchen

  Hello

  > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
  To do this the display of Windows Update driver update?

  If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

  Otherwise, you can try running CCleaner. It can clean and fix registry problems.

• SyncUp software displays the message "SyncUp has stopped working".

  SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

  Hello

  1. what operating system are you using on your computer?

  2. What is the brand and model of your computer?

  3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

  Method 1

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2

  Uninstall and reinstall the software SyncUp.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

  THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following help link:

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

  It will be useful.

• DSC - H3 works including fine arise of the Flash but the flash itself has stopped working?

  Hello

  My Sony DSC - H3 cybershot camera works fine with popping up the flash but the flash itself has stopped working. It appears, but no flash light. I checked all the settings are fine and its mode in which it should be flashing.

  The camera works perfectly fine, except for the flash is not working. It looks like a grilled "bulb". Could it be? Or is it something else?

  What can I do? Can you please help.

  Thank you very much

  Hi, my Sony cybershot camera DSC - H3 works fine with popping up the flash but the flash itself has stopped working. It appears, but no flash light. I checked all the settings are fine and its mode in which it should be flashing. The camera works perfectly fine, except for the flash is not working. It looks like a grilled "bulb". Could it be? Or is it something else? What can I do? Can you please help. Thank you very much

• The Windows Firewall has stopped working, 0x8007042c error code

  The Windows Firewall has stopped working.

  See if this helps: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/firewall-will-not-turn-on/57a4cce5-835f-e011-8dfc-68b599b31bf5

• The delete button has stopped working in Outlook Express 6.

  Outlook express delete failed

  The delete button has stopped working in Outlook Express 6. Empty the file deletion was without help. How can I make it work again? Also I can't manually move an email in the folder to delete.  Any suggestions?

  Your deleted items folder is probably corrupted.  Close OE and delete the deleted items.dbx file.  OE will make a new and that should fix the problem.  Its a good time to save your messages if the records are get damaged.  You may lose all your messages.  See www.oehelp.com/OETips.aspx#6

  Steve

• the profile service has stopped working

  For the last two weeks when I started my Studio Hybrid, I get the message "the profile service has stopped working".

  Most of the time I have to restart in safe mode and do a restore.
  McAffee said I'm sure as well as Windows Defender, and still I can't sign.
  What is happening all of a sudden?
  Thanks for any help you can provide.
  Ron

  Hello

  1. What is the error message or an exact error code?

  2. Since when are you facing this problem?

  3. have you made changes on the computer recently?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to start the service: the user's profile and check if it helps.

  Follow the steps to start the user profile service:

  a. click Start, type Services.msc in the search box and press enter.

  b. Locate the service: user profile Service.

  c. make a right click the service: user profile Service , and then click Start.

  Method 2:

  Run Microsoft Safety Scanner and check if it helps.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Method 3:

  Try to create a new user account and check if it helps.

  Create a user account: http://windows.microsoft.com/en-us/Windows7/Create-a-user-account

  Also read the following article to help of method 3.

  Copy files to a new user account: http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

  I hope that helps!

• "CatalystControlCentre: the host application has stopped working".

  I get this message when I boot: ' CatalystControlCentre: the host application has stopped working. . Caused A problem blocking the program works correctly. Windows will close the program and notify you if a solution is available. " This happened after I got malware and have since sent to quarantine. A / the result is that the wallpaper is gone replaced by a black screen. Some of the icons on the screen and the line along the bottom disappeared. How can I fix it? What I have to find and pay a professional to do it, or can I fix it myself?

  Hi Eagle-B

  
  Did you put the virus in quarantine?

   

  It seems that you still have the virus or malware present on the computer. I suggest you to contact the team of experts on the issue. Also, you can visit the Microsoft security essentials forum for assistance for the number and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/msescan/threads?filter=answered

   

  I hope this helps.