No sweeping

Similar Questions

• How do we uninstall Sweeper mac?

  Sweeper Mac and Megabackup showed the last time I updated adobe flash.  It is constantly running, and I can't seem to uninstall completely.  Any suggestions?

  Sounds like you downloaded an Adobe Flash update from one source other than Adobe. Always update Adobe Flash by going to System Preferences > Flash Player and download the last update in this preference. Other sources may be malware attached to the download or the pop - ups.

  https://en.Wikipedia.org/wiki/MacSweeper

  Uninstall both...

  http://removemacapp.com/how-to-remove-Mac-Sweeper-3-0.html

  http://macsecurity.NET/view/108/

• How do I find and disable webroot spy sweeper?

  I'm trying to get rid of the "inadmissible scripts" that freeze to my computer. Makes me crazy! I'm not very knowledgeable computer, so telling me to disable webroot spy sweeper does not help. I have no idea what it is, where to find it, or how to do it. Help!

  Hello cypressmd, as the link in the second answer of John99 said, the problem is probably an installed extension, try Firefox Safe Mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Best way to erase 'Music' of the iPhone and Resync with my newly deduplicated iTunes (I removed 30 GB of duplicates with "Tune Sweeper")

  Hi, I recently decided to clean up my years of iTunes duplicates.  "Tune Sweeper" ($24.99) reduced my 180GB to 150 GB.

  I don't want my iPhone (50 GB free) existing MUSIC to restore my iTunes on my PC.

  Can I just remove all the current MUSIC from iPhone and resynchronization,

  I go into the settings (storage) and deleted xxGB music on my iPhone but all my songs are still playable.

  I'm willing to pay for advice, if this forum is not able to help.

  Any suggestions?

  Connect the phone to iTunes on the computer that you sync with and click the music option. Uncheck the option "Sync music" and sync. This will delete all music from your device.

  Then go back to the music option and select what you don't want sync'd music on your device.

  See you soon,.

  GB

• "Sweep left" does not work for some email notifications

  On some mail notifications, as documented works "sweep left" very well, but I'm still not clear what if any difference there is between 'X' and 'Clear' (see previous announcement) - I have recently several contradictory theories.  However, for SOME e-mail notifications, "left sweep" simply does not work - nothing happens.  I * think * it's maybe for 'complex HTML' messages, not 100% sure.

  Hi Doug

  As previously indicated, 'X' and are clearly part of the same key - typing will erase / reject notification from your list of recorded notifications.

  Also as previously indicated, there is a difference between alerts by mail in the list of alerts in the Notification Center (IE hitting swiping to the left on the alert) compensation and removal / rampage messages in the Mail application.

  More information:

  https://help.Apple.com/watch/#/apddca457a4f

  https://help.Apple.com/watch/#/apd29461a7b7

• NEX 5N sweep panorama does not

  I have a brand new 5N (10 October 2012) NEX of Adorama with 18-55 mm lens.
  I used only the focal length of 18mm for sweep pano. I tried more than 100 panoramas of sweeping and only 3 came out. 3 / 100 attempts.

  I am a very experienced photographer. The error message is the same every time... "Moving camera too fast."

  I slowed way tried to hold the camera in different ways, gently, on many different outside and inside the scenes and on the tripod.

  Is there something wrong with this mode in this particular 5N.

  It will just work.

  Someone had the same problem? Am I missing something? Firmware fix this problem?

  I got this camera at a price of the rash and it's sold out everywhere, so I doubt I can get another if I return it.

  Any input is greatly appreciated.

  Thank you for your post and welcome to the forums.

  I understand that with Panorama Sweep, you will need to move the camera slowly in the direction that the arrow is oriented. In fact I was experimenting with the device and I have to move slowly in the direction of that the arrow was pointing, I would say that anywhere from 45 to 60 degrees where I was. It took at least 4-5 seconds for the panoramic image to be accepted OK. I was also using the 18-55 lens. By the engineers, Practice makes Perfect so there may be some adjustments to make when you use Sweep Panorama. However, if you have time try to put the camera to an electronics store that sells the camera or one nearby NEX models and compare the Sweep Panorama with your camera. You may be able to determine if your device is defective. If you need to support more do not hesitate to contact the Sony Support by clicking on the following link:

  http://eSupport.Sony.com/us/p/support-c... EX5N & LOC = 3

• myRIO Servo demo does not: Servo sweeps back

  Hi all

  For the first time using LabVIEW and myRIO and I thought I'd run the demo of Servo. The question that it displays the following error message:

  

  If I choose to ignore the error my servo works but don't stop at a point (hold the angle) and sweeps rather backward. This can be seen in the following video:

  https://youtu.be/z3Eluin3sWo

  I'm honestly at a loss, I have virtually no experience with this hardware and software and the standard demo software does not work. I use an analog servo CS - 239 MG Corona.

  Any help will be greatly appreciated

  Hi Kathryn,

  Thanks for all the help, you were extremely helpful the solution was that I needed to power a battery pack as the myRIO provided far too little power. I found the solution in another forum of NOR and the OP knew exactly the same question. I have a battery pack on order and will update with the results.

  Kind regards

  Rhett

• Nor-5406 & nor-5112 frequency sweep

  Hello

  I have a frequency generator (5406) that I use to generate a frequency sweep (1 ms by frequency).

  When I read the signal with a digitizer (5112) it seems that the duration at each frequency is bad.

  I've attached a photo (I hope) to identify the problem.

  The sinus begins here, at a frequency of 20 kHz to 1710 (coordinates, left panel).

  Because I taste 3 MHz and that each stage of the frequency is 1 ms, I expect to see the next step to 4710.

  That is not the case (right panel)

  Any help appreciated

  Also attached to this message is a copy of a part of the block diagram.

  Thank you

  Hello

  The explanation of what you see, is that even if you ar affecting your sample NOR-5112 3 ms/s, you are actually sampling at 3.03MS / s.

  If you are referring to the specs of the device , you will notice that this Council has a maximum rate of 100MS/s of sampling and can sample at a rate decimated 100MS/s/n where n is an integer between 1 and 100e6.  If the sampling frequency is not feasible by the digitizer, the pilot will force the value of the next achievable sampling frequency that is higher than what you asked.  In this case n = 33 and your actual sampling rate is 3.03MS / s.

  If by your calculation for 1ms, you will get 3000 samples at the rate of sampling or 3 ms/s.  This would pass to 3030 samples at a rate of 3.03MS / s.  I think that this corresponds to what you see on the image.  To be certain of the current rate of your Board is sampling, try to use VI "niScope sampling rate" to query the actual sampling frequency of your digitizer.

  -Jennifer O.

• Double sweep of DC voltage

  Hi all

  I am currently using Agilent E3646A dual output DC power supply.

  I'm sweeping the 2 output voltages by using 2 loops, 1 inside the other.

  The attachment shows the connection that I have.

  However, only the inside of the loop works. The outer loop, seems to work on the Panel before labview, but it does not change the nominal voltage of E3646A.

  Any help? Or is there a connection error? I'm new to labview.

  Thank you very much!

  Dear Daniel,

  Thanks for your suggestion.

  I moved drivers in loops, leaving the initialization and the error/close to the outside, and it works.

  Thank you much for the help

  See you soon

• sweep the voltage keithley 2400

  Hi friends,

  I ve made a small program (reusing an I found in the web) to generate a curve using Keithley 2400. I want to sweep the voltage of 1V-1 using for example 10 points and get the current in a graph and a table.

  However, something is not because I have only (not yet correct) measure and no image in the chart and no data in the table.

  Could someone advise me here, please?

  Any help is welcome!

  Thank you

  Hi LabVIEWers,

  I ve you have a problem receiving data from Keithley 2400.

  I m using a distributed (attached) Keithley LabVIEW example and suddenly it does not work. When I run the program it sends the information to the Keithley and a scan is performed. The problem is when the scan is done, no data back to the program so I can't save all data or see any result in a chart or table.

  I ve tried to debbug program using the option to highlight and it is for me that the data are intended to the curve, but I have nothing (just #0 in the output of the Sub - VI last before the graph).

  The strange thing is that this program works so far, no idea what can be the problem?

  Thank you very much!!

• List of Agilent E4980A E420 sweeping request not completed

  Hello

  I am Agilent E4980A RLC control with labview 8.6 GPIB to measure the ability for several frequencies. I was able to run the frequncies LIST SWEEPING up to 65 points with no problems. Buy if I want to measure more frequency points (say 70 points) then I got the error of request not completed-420. My LCR Meter works fine if I trigger it manually with 201 points of measurement (maxinum limit points of the LCR meter). I used the driver NI E4980a. Does anyone have the same problem? Thank you.

  Soon

  I have change the calendar from 10 seconds to 30 seconds and it works now. Thanks to you all. I really appreciated your assistance.

• SignalExpress-Sweep type configuration problems

  Hello

  I am creating an analog signal with a sweep to make the change in the frequency of my signal.

  I chose "Sine wave" as a type of signal.

  Then, configuration of the scan, I have a problem.

  Indeed, the type of configuration, I have chosen is "exponential" (so that the frequency varies from exponentialy). But the graph on the right side of the window as if I had chosen linear.

  When I'm runing the VI, does the frequency varies from exponentialy but the graph remains as if it were varying linearly.

  Is this a bug?

  Is anyway to remedy?

  Thank you very much for your answers.

  Hello

  This is the normal behavior.

  If you take a look whenever you change between exponential and linear from the point to the graphic evolution. For example, if 1 k to the exponential value, the value of iteration is 400, Linear 1 k the value of iteration is completely different. In fact, this graph does not show you values like a curve, because when you assign exponential the y-axis becomes exponential, so the graphic scale variations becomes exponential but not the curve.

  Please let me know if you have any doubt.

  Thank you.

  Best regards.

• Sweep the sinusoidal Amplitude reduction

  Hi all.

  Why is the amplitude of my Sine Sweep decreases?

  I wonder why increase my number of samples, which is located in my VI 51200 value samples, the results of my scan to reduce sinus output amplitude. However if my number of samples is small, let's say 1000 samples, the amplitude of output of the VI measures tone is similar to that which is 0.968709.

  How can I adjust in order to have the correct value of the amplitude. I have need of the amplitude to be exactly one, because I will be out this in my DAQ.

  Here's my VI.

  

  The use of your Measurements.vi is largely meaningless. Read the help for VI.  He finds the frequencies where the amplitude is the most important. It uses Fourier transform techniques to find this frequency. Ideally, a chirp Fourier transformation is a constant. Because the real chirp does not cover an infinite frequency and for an infinite time, the spectrum is modified by the effective window. Thus, the peak of the spectrum is approximately in the center of the bandwidth.

  Delete a spectral measure VI on the block diagram and draw the spectrum.

  When I extracted a subset of table chirp and feed to your measures I have much more reasonable values. Subset starting at index sample 15000 and having length 50 samples returns = 5876.21 frequency and amplitude = 0.99999. The chart shows approximately 5 3/4 cycles in about 1 ms, which is consistent with the measured frequency.

  Lynn

• 5 seconds sweep graphic

  Hello

  I have a table showing a sinusoidal waveform in real-time with a sampling of 300 Hz and amplitude 5V.

  On the time axis (X), I want to display data with the Graphics Mode to scan the 5 seconds, how do I do?

  I want the red line of the mode chart sweep to move from the left to the right side of the chart exactly 5 seconds and then try again from the left.

  Set your properties of chart for updating graphic of scanning or graphic of the range mode.  Make sure that your chart has a length of 1500 samples (5 seconds x 300 Hz) history

• frequency sweep performance in the profile of stimulus Editor

  Hi all

  I am trying to understand what is the best way to do this.

  I have an output signal. I want to start with a 5V signal, so I want to do it in a sine wave of amplitude of 0.05v starting at 1 Hz and gradually increase the Frequency, squirt up to 500 Hz. I know there is a sinusoidal wave function in the profile of stimulus Editor, but he seems to want to keep the fixed frequency.

  Thank you.

  There are a few options:

  1. your own sinewave sequence that will sweep the frequency while he plays. The integrated sine wave function is just a sequence that you can view and copy edit however you want. Double click in the palette to view the sequence.

  2 use multitasking and the sequence of the sinusoid built-in. The sequence of SineWave takes in a setting for the frequency, but it takes the value by reference. This means that if the value mapped to the frequency parameter changes so that the sine wave sequence runs, the frequency of the sine wave will update, too. This allows you to use a multi - load to run two parallel tasks: to call SineWave and one for the ramp of the frequency variable.

  Attached, is an example to help you make sense of it. Maybe it's not the exact logic you want, but should help you get some ideas going. I hope this helps!

• Live in DC Sweep analysis display

  Hello world

  Some of you are perhaps more experienced in this quiestion than me...

  In a certain circuit having a wine input signal and an output signal Vout, is it possible to display the phase shift between two signals vs wine? (sweep the amplitude of the signal through a certain range?).

  There is an option using probes: Probe1 on entry and the Probe2 reference (called Probe1) probe at the exit. In this way, we can display the phase in degrees. But how can you display this value on a chart?

  'Add the expression' did not work for me unfortunately...

  Thanks for any help!

  Hi Ussr123,

  The API of Multisim LabVIEW is not available in all versions, but here's an example how you can get LabVIEW to control a source in Multisim.