The Basic Installation question

Similar Questions

• the basic sql question

  Hi all I have a basic sql question
  Watch below two querries
  

  1.  select 1 from dual where 1 in (select 1 from dual union all select null from dual) 
  
  It gives output  as 1
  
  but below one 
  
  2.   select 1 from dual where 1 not in  (select 2 from dual union all select null from dual)
  
  It gives output as no data found 

  I think as operator will not compare with all the values, but not the outcome it will compare with all values... When comparing with the value null, the result is automatically null
  
  I'm wrong
  Please help me on this
  
  and why performance wise in operator is more better than no of?
  
  Thanks to all in advance

  Thanks for posting your explain plan command

  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 3249215828
  
  -----------------------------------------------------------------------------
  | Id  | Operation        | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |          |     2 |     6 |     4   (0)| 00:00:01 |
  |   1 |  NESTED LOOPS    |          |     2 |     6 |     4   (0)| 00:00:01 |
  |   2 |   FAST DUAL      |          |     1 |       |     2   (0)| 00:00:01 |
  |   3 |   VIEW           | VW_NSO_1 |     2 |     6 |     2   (0)| 00:00:01 |
  |   4 |    SORT UNIQUE   |          |     2 |       |     2   (0)| 00:00:01 |
  |   5 |     UNION-ALL    |          |       |       |            |          |
  |   6 |      FAST DUAL   |          |     1 |       |     2   (0)| 00:00:01 |
  |*  7 |      FILTER      |          |       |       |            |          |
  |   8 |       FAST DUAL  |          |     1 |       |     2   (0)| 00:00:01 |
  -----------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     7 - filter(NULL IS NOT NULL)
  
  02:12:54 SQL> select 1 from dual where 1 not in  (select 2 from dual union all select null from dual);
  Elapsed: 00:00:00.01
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 3291682568
  
  -----------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Cost (%CPU)| Time     |
  -----------------------------------------------------------------
  |   0 | SELECT STATEMENT |      |     1 |     4   (0)| 00:00:01 |
  |*  1 |  FILTER          |      |       |            |          |
  |   2 |   FAST DUAL      |      |     1 |     2   (0)| 00:00:01 |
  |   3 |   UNION-ALL      |      |       |            |          |
  |*  4 |    FILTER        |      |       |            |          |
  |   5 |     FAST DUAL    |      |     1 |     2   (0)| 00:00:01 |
  |   6 |    FAST DUAL     |      |     1 |     2   (0)| 00:00:01 |
  -----------------------------------------------------------------
  

• 7 HR to the basic PDF question

  Hello
  
  My company has a payment application developed in Java. The UIS is dynamic jsp.
  They look a good help online application system in the server environment. and I'm looking at RH7 to
  WebHelp format. We may have to output PDF for the installation guides or other smaller texts.
  
  There are no tools yet; only of MS office.
  
  -Convert files to the output format RH7 PDF do we need Acrobat 9 Pro? Or is a PDF Converter provided with RH7.
  -If if it generates bookmarks and links of cross-references too?
  -If at some point, the customer requests for PDF format help online (or WebHelp) is it possible to reach with less effort?
  
  This sounds like a fundamental question. but I ask for your help because I couldn't find things on Google.
  
  Thank you
  Radha Laermans
  

  Welcome to the forum.

  1] RH comes with a PDF generator.

  [2] all hyperlinks in the source will work in Word and PDF files.

  [3] I don't know what you ask the third question. You seem to be aware that the HR can create PDFs as your first question was about how to sort that leaves "less effort". If you mean "little effort", it is a simple process.

• On the basic ACL question

  I have a few question ACL. I'm not clear on the source address and the destination address in the following cases.

  Case 1

  My IP WAN1 is 1.1.1.1, my FTP server is 192.168.1.2 port 23

  If I have access to FTP from internet, use ftp://1.1.1.1:23, so what's my IP ACL of source and destination IP? 1.1.1.1 is source? destination is 192.168.1.2? or any?

  Internet-(Outside 1.1.1.1) ASA (inside 192.168.1.1) - FTP (192.168.1.2)

  Case 2

  My WAN1 is always 1.1.1.1 and FTP is 192.168.1.2 port 23

  If I use the ftp://1.1.1.1:8023internet FTP access, what the ACL source IP address and destination?

  I tested in both cases = any source and destination = everything is OK.

  But I confused. I still think the Source address is IP WAN1.

  Hello

  You access the server FTP from the Internet and most likely, you won't know what ip address you will be source. In this case, your source ip address will be everything. If you know the ip address on the Internet that will have access to your FTP server, and then you specify it as the source. You access list will be as follows:

  access-list extended 100 permit tcp any host 1.1.1.1 eq 21

  access-list extended 100 permit tcp any host 1.1.1.1 eq 20

  or

  access-list extended 100 permit tcp x.x.x.x y.y.y.y host 1.1.1.1 eq 21

  access-list extended 100 permit tcp x.x.x.x y.y.y.y host 1.1.1.1 eq 20

  (if you know the network or host who will have ftp access)

  You must also make sure that you have configured static NAT and inspection of the request to your FTP server

  Thank you

  John

• Why do need write access to the Java installation directory

  We are upgrading of Siebel Analytics 7.8 to OBIEE 10.1.3.4.
  As OBIEE requires Java 1.5 or higher as a prerequisite, we plan to uninstall Java 1.4 and install the latest version of Java 1.5.
  According to OLIVIER Installation and Configuration Guide http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf-> Page 39 "If you install by using the basic installation type, make the user or user group permissions.
  writable for the user who installs Oracle Business Intelligence for all JDK 1.5.0 installation directories,.
  subdirectories and files. Can someone let me know why we need write access to the directory to install Java?
  
  Thank you
  Chandra
  
  Published by: user6086408 on April 5, 2010 15:07

  I had this same issue and asked Oracle. Here's what they told me:

  By Dev:

  «For presentation of OBI and OBI Publisher Services, the jdk font files are copied to the location of the JDK because we do not bundle our own JDK.» To ensure that the installation can do this, you must make sure the Oracle BI Installer has permissions to copy files to the location specified in the JDK.

  This means that if the same user that Installer / decompressed JDK is also installing Oracle BI, installation should work. In this case the permissions of the JDK is probably 755.

  This will not work if a root user installs JDK and a normal user installs Oracle BI because the normal user has not access to write to the location of the JDK or will not work if the location of JDK is read-only, i.e. 444. In this case running chmod 777-r will work. »

  Jerry

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

• Satellite P100 - 160 PSPAAE: Question on the driver installation instructions

  Hello.

  I recently bought a P100-160 model PSPAAE with Vista pre-installed. Like many others, I had no choice with the OS and my experience so far has left me wanting to go back to XP.

  I found the page of appropriate support for the drivers (I guess I have to use the drivers for the PSPAA) and read the instruction sheet that comes with them. There are some questions I want answered before I start on this particular cliff.

  The guidelines mention the SD card Format utility, but I see no mention of one in the list of drivers. It is included in one of the other drivers or is it not found elsewhere?

  Why the Sun Java Runtime Environment is necessary?

  I guess if my machine has no Bluetooth or Infra-red that I didn't need to load the drivers.

  Thanks in advance if anyone is able to help.

  Kind regards

  John

  Hi John, I recently went through the same process and after a few attempts, settled on the following as a reasonable XP installation (I don't need all that other stuff):

  Satellite Pro P100 (PSPAEA)

  Chipset: Mobile Intel (r) 945 PM Express Chipset
  Memory controller: 82945 PM
  I/o Controller: Intel (r) 82801GBM i/o controller hub (ICH7M)

  What I installed...

  03 - display Driver
  04 chipset Driver
  05 - network - upgrade Ethernet driver
  06 - network wireless driver
  09 - sound Driver
  10 - driver CardBus controller with UltraMedia
  12 - modem Driver
  13 - modem region Select utility
  14 Bluetooth Stack
  15 - Bluetooth monitor
  17 Hotkey Utility
  21 - SD Secure Module
  22 - SD memory card format
  28. DVD-RAM driver software
  33 user manual
  TOSHIBA fingerprint digital-software (from Vista drivers)
  TOSHIBA-disk-Creater (from Vista drivers)

  What I do not installed...

  01 - Microsoft Updates (I used Windows Update to do this)
  02. Sun Java Runtime Environment
  07. customer Intel utility
  08 Atheros Client Utility
  11 - touch pad Driver
  16 - C - infrared driver
  18 YPP/power button Utility
  19 utilities
  20 - buttons
  23 - assist
  24 - ConfigFree
  25 - zoom utility
  26 PC Diagnostic Tool
  27 CD/DVD Drive Acoustic Silencer
  29 WinDVD Creator
  30 - RecordNow
  31 DLA
  32 - DVD player

  Note: for 05 - pilot network to install correctly, I had to upgrade the Device Manager ethernet controller.

  The numbers relate to roughly the original installation instructions. I do not pretend that it's the perfect installation, only one who appears to be stable and suitable for my purposes...

  With respect to the SD memory card Format driver, I found it somewhere, but I don't remember where (sorry). It has the following file name, even if once extracted (ToshibaSDMemoryCardFormat_v2100A.exe).

  Hope this helps and please post your results as it is good to share their experiences.

  Regards, Rob

  PS one of the biggest advantage I found was much better video support nVidia for Vista drivers were not very good and assured por.

• The basic coverage of the hinge/m7-j010dx TouchSmart pop question

  My TouchSmart from HP ENVY m7-j010dx laptop on the left side at the bottom the Black cover case began to appear when I open/close the cover. It is not completely broken, I can hold closed while closing or opening the lid (screen), but it worries me.

  Don't know that I need to change the hinge or the basic coverage. My warranty expired July 2014.

  HP Experts please help.

  Thank you very much.

  Kind regards

  Rachman

  Rachman

  Just got the laptop HP Tech Center fixed. They fixed the problem of hinge hardware.

  I personally thank Jenn (case manager) of elevation of the matter and follow-up to ensure that everything goes smoothly. Hats off!

  I also thank @george-p, @JeffHelp, @Futoji for the support.

  Care more!

• Basic Flash question: Add skin and always keep the link hyper

  Using Creative Suite CS4. I have little or no action script skills.

  I created a 2 minute flash .fla file. In the end, I've added a button that, when clicked, opens a window onto another site. When I exported a .swf file, the button worked fine. When I added the file .swf into an html page, that it worked well also. The problem came when I tried to add a skin with video controls.

  I went through the tutorial that says I need to import the my video in FLV or F4V format. The ony way I could do was to export my FLA file in MOV format and convert it to an FLV file in Adobe Media Encoder CS4. But when I did I lost my link at the end. The video controls excellent work, but how do I add the hyper link in?

  And why hell can one export a Flash FLV file?

  Thank you!

  (this message is so old the answers were lost during a conversion adobe a few years ago.)

  the answer to the op's question, is that you cannot create a flv that executes actionscript.  However, you can create a flv that contains cuepoints and the cuepoints can trigger actionscript to run.

  so, the op should add a cuepoint until the end of the flv (or, if using as3, just use an Event.COMPLETE event listener for the flvplayback component) to detect the end of the flv and trigger the navigateToURL code.

• Tecra A3x hangs at "Setup starts windows" during the XP installation

  Hi again
  I posted another thread on this laptop. This question was cured by adjusting the correct CPU.

  So, now everything seems fine. Everything seems to work except very well.
  During the installation of XP, the drivers all will charge them and then we get the text 'Setup starts windows' the lower left of the screen.
  It does not further, just sitting there.

  I googled this problem and read many old threads on the subject, I went to the Microsoft website too.
  So far I tried (on the basis of these old threads)

  Different installation discs
  Different memory
  Disable (in bios) that anything not reqd such as Lan
  Reset the default bios settings
  You press F5 when invited to press F6 for scsi drivers. From there, I tried different setting options.

  The current bios is 1.30, I understand there is a update available for 1.4 but it is a basic installation Win rather than back may be done without THAT installed XP.

  Suggestions for what the problem maybe?

  Hello

  What version of Win XP you try? Win XP contains the SP3?
  Please include to the Win XP SP3 using a tool called nLite and then try to reinstall Win XP.

  AFAIK the Tecra A3x support a common IDE HDD so no driver RAID or SATA is necessary.

  You can also check the HDD of the Tecra.
  Use the tool called Drive Fitness Test to test the HARD drive

  Good luck

• What are the basic criteria to keep a computer in good operating condition?

  HI: I asked a question before and I will say first my pc works fine and I have no problem.  I want to know, as PC users, what are the basic top of page I should or can do to keep my PC works perfectly.  First: I am a paid version of the anti-malware software and Online Armor for my firewall.  I am running Windows 7 64 bit with IE 9 - I used 10 & 11 and frankly don't like them.  I run more registry cleaner software as I think that was my fall down during the past year, why I had to reinstall my discs of recovery on 12 or more times.  Any basic help and knowledge would be appreciated as I like to learn new things - also if anyone knows of acceptable software that is allowed to run or use to keep your pc running like new thank you Dave

  Hello

  You mention AntiMalware program

  There is a free version of Malwarebytes Anti-Malware program, which works very well.

  It's also a scanner at the request, not a real-time Scanner, to make it work when you want.

  __________________________________________________________

  Registry cleaners can do more damage to your operating system any good they claim to be able to do.

  You should work only in your registry manually and then only if you know what you're doing.

  __________________________________________________________

  Here are the basic steps to take to keep your machine operating smoothly and effective:

  Search for malicious software with the FREE version of this program.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click all programs, click Accessories , click command prompt and then click Run as administrator of . If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  2. Type the following command and press ENTER:
     /ScannowThe SFC sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• How to co-exist the client installation

  Hello

  I have an asp application classic that we intend to do new development using ASP.NET and the last oracle. NETproviders that requires the installation of the last client I believe.

  I think the customer on our 2003 Server r2 is release 9.0.1.1.1, which runs without problem.  When I tried to install the following:

  Access components (ODAC) Oracle data for Windows downloads

  He broke the existing classic asp application with an error.  I can't remember the exact verbiage of the error however.  something to do with the tnsnames file.

  I'm almost certain that I need the above to allow my .net application run.  How can I get these to coexist on the same box?

  Thank you.

  You want to publish your .NET config file? Very likely questions tend to be typos.

  You can test to see if the basic connectivity works if you copy and paste the connection descriptor directly in the Source of data of ODP.NET connection string attribute. I.e.

  Data source = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = )))

• The more fundamental question - not answered

  I am a potential customer really frustrated.  I want to take my old Compaq Windows XP machine, delete the Junk I don't no need and "migrate" to my new MacBook Pro (the Compaq has a broken screen and works terribly with an external monitor... it is running OK, but the screen issues are difficult to handle, plus I want just a laptop).

  Here is the #1 question, for which I can't find a simple answer:

  1. do I need to install Windows on the MacBook Pro FIRST?

  I think it would be #1 FAQ - I don't want to buy Windows version - what if I do not, and if it must be previously installed before you run the merger, according to me, that I have to buy a new copy (I've updated the Compaq to a retail version of Windows XP Professional, but the used copy had been sitting in the envelope of shrinkage for years in the office... so there NOT all Service Packs.  The Compaq has the installed Service Pack.

  After buying a MacBook and a software to go with it, I'm good with purchase of merger (which looks like a top quality program) - but I REALLY don't want to buy Windows as well (it was not in my budget).

  I searched forums, FAQ, reviews, how - to, from, and there is no consistency to the installation methods.  Most seem to involve using what we call Boot Camp (I've heard of but I'm not familiar with, being a fairly recent Mac convert) to create a Windows partition using Windows Installer disk somehow.

  If it's true, I'm screwed and I have to pay for (I guess) Windows 7 and the basic versions probably do not work for me I am looking at a high price (if I can pass it to Win7 LATER... like 6 mos or so... that's fine, I just can't spend the money now).

  This post is much longer than the answer... I hope.  And if it is a simple 'yes' or 'no' PLEASE put in the FAQ; I have 2 neighbors that have not installed Windows when they moved to Mac recently for exactly the same reason - that they could not understand what the answer was to question my (and their).

  Thank you!

  Jim

  Silverface wrote:

  Are there no a 'yes or no' answer to the simple question "do I need to install Windows on Mac BEFORE installing Fusion?

  NO!

• Satellite A200-13O: Vista Ultimate to basic installation help

  I need assistance to the full installation of Windows Vista Edition in my A200-13O.
  My current operating system is Windows Vista Basic and I want to upgrade to Windows Vista Ultimate.
  Based on the download section of driver I need the following drivers must be installed.

  1 Windows Vista RTM
  2 native Intel ICH7M Chipset utility
  3 945GM Intel display driver
  or
  3 nVIDIA Display Driver G72MV-A3/NB7P-GS
  Realtek Audio driver ALC861D 4
  5 Realtek 8101E 10/100 / Driver LAN Gigabit 8111
  6 Synaptics Touch Pad Driver (with LuxPad)
  7 ALPS Touch Pad Driver
  8 card reader TI Multiple digital media
  9 TOSHIBA software modem
  10 Golan Intel Wireless LAN Driver
  11 Kedron Intel Wireless LAN Driver
  12 Atheros Wireless LAN Driver
  Camera Chicony 13 software
  14 Bluetooth Stack for Windows by Toshiba
  15 Bluetooth monitor
  16 TOSHIBA Value Added Package
  17 TOSHIBA Flash Cards Support utility
  TOSHIBA 18 hardware configuration utility
  19 TOSHIBA supervisor password
  20 TOSHIBA SD Memory utilities
  21 TOSHIBA ConfigFree
  22 TOSHIBA Assist
  TOSHIBA Speech System 23
  24 TOSHIBA Extended tiles for Mobility Center Windows V1.01
  TOSHIBA Fingerprint Utility V5.6.0.3221 25

  I have already downloaded most of them, but I can't find some like [2] utility Intel ICH7M Chipset, driver of Kedron Intel wireless LAN [11], [23] TOSHIBA Speech System. Also some drivers are not installed properly.

  Can you please help me.

  Chipset driver you can get on the Intel Web site
  www.Intel.com
  But I think that the pilot could also be in the display driver because it s the same chip.

  The WLAN driver I found on the Toshiba site so download and install it.

  The speech system could be integrated into the audio driver.
  But download and install all the drivers and the system will work.

• Envy 17 j120na: 10 Windows will not start because of the driver installation failed

  History:

  I have a computer laptop j120na Envy 17 that came with windows 8.1.

  I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

  Question:

  Is this a problem with the driver installation? And if so, how do I return it?

  P.s: System Restore is not an option, I restore point.

  Hi there @Aj1baba,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

  The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

  Have you tried to go into Safe Mode?

  You have media or recovery disk?

  Have you tried to do a Reset BIOS?

  Have you tried perform a hard reset?

  You have beep codes or flashing LEDs?

  Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

  Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Have a great day!