7 HR to the basic PDF question

Similar Questions

• If I get the basic pdf to Word and Excel conversion Services, it also converts graphics into Word documents?

  If I get the basic pdf to Word and Excel conversion Services, it also converts graphics into Word documents?

  Thanks Dan

  Hi Dan,.

  You can subscribe for services to export it in PDF ( https://cloud.acrobat.com/exportpdf ) to help you can convert all formats of files mentioned in this document KB file formats supported. ExportPDF, Adobe PDF Pack.

  Let me know in case if you have any additional questions.

  Kind regards
  Nicos

• the basic sql question

  Hi all I have a basic sql question
  Watch below two querries
  

  1.  select 1 from dual where 1 in (select 1 from dual union all select null from dual) 
  
  It gives output  as 1
  
  but below one 
  
  2.   select 1 from dual where 1 not in  (select 2 from dual union all select null from dual)
  
  It gives output as no data found 

  I think as operator will not compare with all the values, but not the outcome it will compare with all values... When comparing with the value null, the result is automatically null
  
  I'm wrong
  Please help me on this
  
  and why performance wise in operator is more better than no of?
  
  Thanks to all in advance

  Thanks for posting your explain plan command

  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 3249215828
  
  -----------------------------------------------------------------------------
  | Id  | Operation        | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |          |     2 |     6 |     4   (0)| 00:00:01 |
  |   1 |  NESTED LOOPS    |          |     2 |     6 |     4   (0)| 00:00:01 |
  |   2 |   FAST DUAL      |          |     1 |       |     2   (0)| 00:00:01 |
  |   3 |   VIEW           | VW_NSO_1 |     2 |     6 |     2   (0)| 00:00:01 |
  |   4 |    SORT UNIQUE   |          |     2 |       |     2   (0)| 00:00:01 |
  |   5 |     UNION-ALL    |          |       |       |            |          |
  |   6 |      FAST DUAL   |          |     1 |       |     2   (0)| 00:00:01 |
  |*  7 |      FILTER      |          |       |       |            |          |
  |   8 |       FAST DUAL  |          |     1 |       |     2   (0)| 00:00:01 |
  -----------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     7 - filter(NULL IS NOT NULL)
  
  02:12:54 SQL> select 1 from dual where 1 not in  (select 2 from dual union all select null from dual);
  Elapsed: 00:00:00.01
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 3291682568
  
  -----------------------------------------------------------------
  | Id  | Operation        | Name | Rows  | Cost (%CPU)| Time     |
  -----------------------------------------------------------------
  |   0 | SELECT STATEMENT |      |     1 |     4   (0)| 00:00:01 |
  |*  1 |  FILTER          |      |       |            |          |
  |   2 |   FAST DUAL      |      |     1 |     2   (0)| 00:00:01 |
  |   3 |   UNION-ALL      |      |       |            |          |
  |*  4 |    FILTER        |      |       |            |          |
  |   5 |     FAST DUAL    |      |     1 |     2   (0)| 00:00:01 |
  |   6 |    FAST DUAL     |      |     1 |     2   (0)| 00:00:01 |
  -----------------------------------------------------------------
  

• On the basic ACL question

  I have a few question ACL. I'm not clear on the source address and the destination address in the following cases.

  Case 1

  My IP WAN1 is 1.1.1.1, my FTP server is 192.168.1.2 port 23

  If I have access to FTP from internet, use ftp://1.1.1.1:23, so what's my IP ACL of source and destination IP? 1.1.1.1 is source? destination is 192.168.1.2? or any?

  Internet-(Outside 1.1.1.1) ASA (inside 192.168.1.1) - FTP (192.168.1.2)

  Case 2

  My WAN1 is always 1.1.1.1 and FTP is 192.168.1.2 port 23

  If I use the ftp://1.1.1.1:8023internet FTP access, what the ACL source IP address and destination?

  I tested in both cases = any source and destination = everything is OK.

  But I confused. I still think the Source address is IP WAN1.

  Hello

  You access the server FTP from the Internet and most likely, you won't know what ip address you will be source. In this case, your source ip address will be everything. If you know the ip address on the Internet that will have access to your FTP server, and then you specify it as the source. You access list will be as follows:

  access-list extended 100 permit tcp any host 1.1.1.1 eq 21

  access-list extended 100 permit tcp any host 1.1.1.1 eq 20

  or

  access-list extended 100 permit tcp x.x.x.x y.y.y.y host 1.1.1.1 eq 21

  access-list extended 100 permit tcp x.x.x.x y.y.y.y host 1.1.1.1 eq 20

  (if you know the network or host who will have ftp access)

  You must also make sure that you have configured static NAT and inspection of the request to your FTP server

  Thank you

  John

• The Basic Installation question

  Instructions for installing an ovf file, but the download is a tar file.   I know almost nothing about Linux or what a tar file.  How to make an ovf file?

  In computing, tar (derived from tape the archive) is both a file format (in the form of a type of archive bitstream) and the name of a program to manage these files.

  You can "unzip" the file with one of the programs listed here: http://en.wikipedia.org/wiki/Comparison_of_file_archivers

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

  http://Twitter.com/vmwarekb

• I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to sign

  I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to register for the conversion program.  I would rather talk to someone, but I can't find a phone number or the option for a cat.  I have a PC.  Any help would be appreciated.

  Hi dianar30180588,

  Try to use the service to export to PDF Online https://cloud.acrobat.com/exportpdf

  Kind regards
  Nicos

• I paid for the Basic program convert PDF to Word or Excel - how to operate?

  I paid for the Basic program convert PDF to Word or Excel Documents.  When I pull up the PDF I want to export and click the export in the tool bar it brings me back to to sign up for the service I already paid and received e-mail confirmation - help!

  1 make sure that you have done a "ExportPDF' or 'PDF Pack', not another thing.

  2. check that you sign with the SAME Adobe ID used to subscribe.

  3. If no, go to manage account on the Adobe website and make sure your subscription is active. (If you just pay it may take up to 48 hours for a reason any).

• The basic coverage of the hinge/m7-j010dx TouchSmart pop question

  My TouchSmart from HP ENVY m7-j010dx laptop on the left side at the bottom the Black cover case began to appear when I open/close the cover. It is not completely broken, I can hold closed while closing or opening the lid (screen), but it worries me.

  Don't know that I need to change the hinge or the basic coverage. My warranty expired July 2014.

  HP Experts please help.

  Thank you very much.

  Kind regards

  Rachman

  Rachman

  Just got the laptop HP Tech Center fixed. They fixed the problem of hinge hardware.

  I personally thank Jenn (case manager) of elevation of the matter and follow-up to ensure that everything goes smoothly. Hats off!

  I also thank @george-p, @JeffHelp, @Futoji for the support.

  Care more!

• Basic Flash question: Add skin and always keep the link hyper

  Using Creative Suite CS4. I have little or no action script skills.

  I created a 2 minute flash .fla file. In the end, I've added a button that, when clicked, opens a window onto another site. When I exported a .swf file, the button worked fine. When I added the file .swf into an html page, that it worked well also. The problem came when I tried to add a skin with video controls.

  I went through the tutorial that says I need to import the my video in FLV or F4V format. The ony way I could do was to export my FLA file in MOV format and convert it to an FLV file in Adobe Media Encoder CS4. But when I did I lost my link at the end. The video controls excellent work, but how do I add the hyper link in?

  And why hell can one export a Flash FLV file?

  Thank you!

  (this message is so old the answers were lost during a conversion adobe a few years ago.)

  the answer to the op's question, is that you cannot create a flv that executes actionscript.  However, you can create a flv that contains cuepoints and the cuepoints can trigger actionscript to run.

  so, the op should add a cuepoint until the end of the flv (or, if using as3, just use an Event.COMPLETE event listener for the flvplayback component) to detect the end of the flv and trigger the navigateToURL code.

• LabVIEW base, protocols supported system of development and the basic features

  Hello

  I ask this question here because I can't find that information on the web, or I get the technical support e-mail response. We are interested in acquiring a license of basis of Labview to start development to develop test for simple automation systems. The basic idea is to have a card with digital, analogue i/o, common seria interfaces: RS232, Ethernet, I2C or SPI. All this to interface HW under test.  A single port for communication with the PC (USB, Ethernet, RS232).

  We would like to know:

  (1) what protocols are supported by the Labview Base development system package.

  (2) if the license mode allows you to integrate MATLAB/C/C++ code.

  (3) in general, where a document that provides details on the characteristics of the Labview. We were not able to find a manual for it. Just this very basic with informaton purchase link: http://sine.ni.com/nips/cds/view/p/lang/no/nid/1385.

  Kind regards

  Jose

  Have you looked at the page 'Buy' for LabVIEW? http://www.NI.com/LabVIEW/buy/

  Basically, I think that LabVIEW base supports everything in terms of basic Windows protocols, but does not include LabVIEW RT or FPGA (for CompactRIO/FPGA targets) but you can use series, ethernet, etc. DAQmx for windows (and also the instrument 3rd party drivers). It doesn't have the enhanced math library or the application Builder so that you can not create executables/installers - you will need run your code in the development environment.

  Alternatively, you can call external code .NET / C dll through the call library function node. You will not be able to incorporate Mathscript, because it is only in the complete edition upward.

• The basic service of the TPM secure in Windows 2003

  The basic service of the TPM secure in Windows 2003 is configured to run automatically, but it stops. When you try to start it, I get the message "the TPM Base service on started and then stopped. Some services stop automatically if they have no work to do... "This is the normal behavior for this service? If supposed to work, what can I / check?

  Hello

  The question you have posted is related to the Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Thank you.

• With an average using the "basic DC/eff' VI

  I seem to end up using the "basic DC/eff" VI a little average my data to my DAQ system. However, I have a question about what's going on "under the hood".

  Let's say, for simplicity I acquire data at 1 kHz into blocks of 1000 samples.

  Thus, all the 1 second I push 1000 samples in the VI-DC/RMS database as a data type of waveform.

  This means that the outputs 'DC' and 'Eff' will update at the rate of 1 second.

  The question is, is "continuous" averaging? In the sense that if I was doing 'good' low-pass filtering (on average is just the same as the low-pass filtering) - say simple TREE with notches n - to the DSP, then the output of the filter would be updated at the same speed as data entry; That is to say. taps would be 'move along' the input data at the same rate as the input data passes through the filter. I'm guessing based on my above explanation that's not what's happening. Instead, the VI DC/RMS is on average an entire block of 1000 samples and then 'jump' 1000 samples along and doing the next block.

  This is not necessarily a problem, but it is not not true low-pass filtering and I can image some scenarios where there might be artifacts because the moyenneur filter jump 1000 samples whenever it takes on average. I assumed that the only solution is to implement filtering in a loop of much higher speed and this could prove problematic in the higher frequencies of sampling.

  Anyone got any ideas on that? I worry about anything?

  Dave

  Hi Dave,.

  The 'average base DC - RMS' feature is designed to work only with continuous acquisitions, it will lift a warning is the signal is not continuous. When you open the function and examine the code in the function there is a Subvi with status information, which permits the function to continue the average of the previous data block.

  For this reason, we provide a reset terminal if you need 'forget' the previous calculations.

  Much of this is discussed in the detailed help on function, but still sometimes there hands dirty to know how the code works and review the code.

  Concerning
  JamesC
  NIUK and Ireland

• Is anyway to create fifth partition and keep the basic hard disk?

  Hi, my laptop is g7 1207se Pavilion and the and HP has made 4 partitions (C for windows) and the other 3 for system files and recovery, I want to create a new partition for my files (so I can recover my system without losing them) or install other operating systems, but apparently if I want to create fifth partition I have to convert my hard drive in Dynamics by the practice that I won't be able to boot from any partition but the C, which means no recovery and no other operating system.

  Is anyway to create fifth partition and keep the basic hard disk?

  Hello

  See the excellent guide of Daniel_Potyrala on the link in this regard.

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-pre-loaded-Windows-7/TD-p/742019

  Kind regards

  DP - K

• How can I get the Basic for Windows Media Player codec pack?

  original title: green screen recently started in windows media player for Vista 64-bit.

  It works very well for some videos (like those recorded uncompressed, or some codecs) but a single codec that I save it as coming out of Sony Vegas (Windows Media video V11) goes green screen with playback of the sound. How can I get the basic for 64-bit Windows Media Player codec pack? It worked perfectly for several years now on this machine. Suddenly, it does not work. Last time that I used it very well if a few months ago.

  Hi, MisterMark67,

  What changes have been made recently to the computer?

  Have you tried a system restore to a time before this problem?

  Here are answers to some common questions about codecs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Windows Vista Codecs Pack base 10.04 (32-bit & 64-bit codecs)

  http://www.x64bitdownload.com/downloads/t-64-bit-Windows-Vista-codecs-pack-basic-download-wmzypreu.html

• Cannot get the Adobe PDf printer to run on windows 7-64 bit

  Has anyone solved how do the Adobe PDf printer in windows 7-64 bit. During the installation it aligns it with LPT1 printer port. other discussions/solutions, it was suggested to add new printer with port existing use: Documents\ * .pdf (Adobe PDF) selected.

  This port option does not appear in the list of existing ports well. can someone help with this problem? Thanks to a witness of anomaly. Mike was soon

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner