The battery does not charge on Hp 4340 s. (Bettery and charger are fine)

Similar Questions

• Satellite A30 - electric light flashes and the battery does not charge

  Hi guys,.

  I have the model above and recently, when I plug in my power cord to the back of the laptop instead of the usual constant green light loading, the indicator flashes and the light orange low battery always flashes as well.

  I have checked the plug, unplugged the power cord from the laptop and plugged back again but does not help. A few times it started loading so everything went well and now he again refuses to load.

  Any suggestions how I can solve this will be highly appreciated.

  Thank you.

  Dante

  Looks like a hardware problem

  Usually if the power light blinks then it does not sound good because the LED provides an error code which can be read by a technician for laptop

  But before you will contact the technician for laptop for help, try to do it:
  Remove the battery and unplug the AC adapter from the portable computer
  Wait about 20-30 minutes and then reconnect the two parts.

  Then try to turn on the laptop

  If it doesn t help that it s time for the call of the ASP

• The battery does not charge.

  Hello

  I have a Compaq CQ58, who said "Pluuged, to the do not load ' for the last 2 days. The laptop is only 7 months, and before that had a pretty good battery life. I tried to turn it off at night, and leaving load like that, but it makes no difference. I use this laptop for minutng meetings, so this will be a major issue for me.

  This model is known for having a battery problem?

  Thank you

  Pheobe

  No worries.

  You have access to another AC adapter?

  You see an icon that indicates the power adapter is connected when it is plugged?

  Follow the instructions on this document from HP web. Glance at the bottom of the document to find the section entitled manually calibrate the battery. Be aware that a manual calibration can not solve the problem if the problem is actually due to the power control and switching circuit on the motherboard of your laptop.

  If this is the root cause of the problem, you don't have any other option than contact HP and addressing a service engineer on the problem.  Which can cause that it is necessary to send the laptop warranty service. When you talk to a customer service engineer make and consult the troubleshooting we have done on the issue here in the forum.

  Best regards

  ERICO

• The battery does not charge fully.

  After that I updated the Bios to the version my G40-80 lap 79, only loads up to 81% of battery! Can someone help me with this situation?

  Akbar

  Hi Akbarw,

  Run you reset the battery meter and check for the issue.

  Best regards

  Ashwin. S

• Satellite L655-13V - battery does not charge

  I have laptop Satellite L655-13V and the battery does not charge while I plugged the AC/DC adapter.
  and give me this status: "plugged in, not charging."
  And when I connect the battery only work on computer, and when I connect the AC/DC adapter only without battery the computer works also.

  But when I connect the battery and plugged to the AC/DC battery adapter not charging and give me this status: "plugged in, does not support".

  Please, help me to overcome this problem.

  Hello

  Leave the AC adapter plugged into the laptop for a longer period of time.
  In many cases, the battery may not start to demand immediately, as his deeply discharged.
  In this case the adapter must be connected to the laptop for a long period of precharge the battery, then the battery should start loading as usual.

• Satellite L655 new battery does not charge

  Satellite L655 new battery does not charge

  Hello halik

  It is not easy to say what the problem is here.
  Purchased new and original Toshiba battery with the same part number (model number).

  New battery is recognized by the system?

• Satellite L30 - battery does not charge

  I have a Satellite L30 and the battery does not seem to charge.

  The battery keeps flickering light with yellow outside. I can use the laptop when I am connected but when if I'm moving to much the battery seems to lose the connection to the AC adapter.

  I don't know if it's the battery or something else.
  Can anyone help?

  Please, remove the battery and use laptop with AC adapter only. I imagine that you will be able to use your laptop properly. When the laptop is ON put the battery back in place and let us know if the battery led will continue to Flash.

  If Yes, I'm pretty sure the battery is dead and you need a new.

• BlackBerry Smartphones battery does not charge in cradle

  Little new here, I have a storm 9530 through Verizon.  After a 5.0.0.32 8 update I'm having a problem loading the phone. When it is placed in the cradle, that the phone does not charge, indicator does not illuminate. After several tests, it will load. If this isn't the case, then a battery pull will do. Now, it becomes more difficult to load the same with the battery pull. Is there a solution for this problem? Another date? Help, please. Thank you.

  I tried your solution last night and the camera loaded to thank you for your help.

• Battery does not charge, but by Satellite Pro L510 is running in battery mode

  Hi, I had a few odd battery problems these days:

  I had charged my laptop completely to 100% and then used it on the train on my way home (in Windows 7 64-bit), how I got it to about 70%, shut down normally, put it in my bag and left there until I got home. When I got home, I tried to turn it on but it lights and battery light orange blinking indicating that there can be no charge. I plugged it in and it worked as usual (Linux), so don't think too hard on this subject.

  Later I realized that the battery was still the load after longer that it should have been and running the acpi + (linux) command told me has the battery + charge, 0%, charge at the zero rate - will never fully charge. + I disconnected to see if it worked, and the battery lasted as usual, although always it's 0% charge rate.

  I started in Windows 7, and the battery reported that it was at 68%, so I assumed it was back to normal. A while later, I noticed that he was still 68%, despite having connected for a while - at least an hour. Start on linux, acpi showed data battery normal search, except that it was 'blocked' to 68%.

  I disconnected the laptop and run it as usual, and it ran until he cut; I guess with him out of power. I plugged it back in and it is 'charge' again, even if it is still 0% battery and "load at the zero rate".

  Before all this happened, the battery works well - apparently to 94% of its capacity. It would be modified for a few hours unplugged play movies or games.

  Summary: PC laptop battery suddenly going to works "attributed to the zero rate" and 0% complete; battery still seems to work very well, seems fresh and portable no power plugged in but the battery is not 'charging' or have his percentage of charge remaining increase.

  Someone at - it ideas? I have yet to try a BIOS update, but it seems that there is one available, so I will give that a try. I feel that the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.

  Thank you!

  Hello

  I think you should try upgrading the BIOS
  BIOS default value, and then try to charge the battery again.

  > get the impression, the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.
  Well, it of really difficult to tell if the battery or the mobo may be affected
  In my opinion, the battery must be tested without a doubt

• Satellite L500D battery does not charge

  My L500D is less 12 months... sound closer to 8 months and the battery will not charge...
  I tried the troubleshooting tips him are delivered with the user manual but light only stays on for about 5 seconds and it constantly says 0%.

  Right now I am an extremely frustrated owner of Toshiba and will be offended if I need to replace the battery after 8 months of normal personal use.

  All the tips, advice and suggestions are more then appreciated!

  Hello

  Battery problems are nothing unusual, that sooner or later each battery will die it s only a matter of time but of course he s strange that the battery can not be charged after 8 months of use

  However, the battery and the laptop are covered under warranty for 12 months.
  You should get in touch with a local ASP in order to solve this problem
  If the warranty is valid, everything must be done free of charge...
  .
  Good luck

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• Defender of the window does not open unless I restart my computer and try again

  original title: Windows Defender

  Defender of the window does not open unless I restart my computer and try again.  Then it will be open for a few minutes, but then I get the error message: 0x800710dd and it closes.  I don't use McAfee antivirus and spyware.  I use Microsoft Security Essentials.

  Defender of the window does not open unless I restart my computer and try again.  Then it will be open for a few minutes, but then I get the error message: 0x800710dd and it closes.  I don't use McAfee antivirus and spyware.  I use Microsoft Security Essentials.

  Windows Security Essentials (MSE) is supposed to close Windows defender.

  WSE has his own Defender. To have 2 defenders running will create conflicts.
  What happening IS normal. You have no problem.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Locking XP! error "the system could not log. Make sure your username and domain are correct, then type your password again.

  Original title: Locking XP!

  I tried to read all the relevant messages and walked the Earth for this solution, if someone could help me I would be grateful.

  A dear friend died and I got his PC - a fast XP with SP3 which (elderly) she only used for web & email. His account has been "Judi".

  I noticed a while back that, on the logon screen, that there is another user called 'Fiona' (she told me an old co-worker who probably stayed with her).

  Now a friend in need of a very old HP PC Lions not having completely fortunately I managed to copy his files before he was insane - I offered this newer PC it after that I have "set up" for him.

  I put a new account in place on this new PC "Ken" has been added. Then, after the deletion of accounts Judi & Fiona, I cleaned the machine with MalwareBytes, CCleaner & defrag.  All is well now with only Ken appearing on the screen logon (with an image of the appropriate icon), that I used several times in the implementation of his e-mail account and move its acrossetc files. His password is empty.

  Being the only user now Ken, I thought that it strange would its user (only) one click each time to the 'Log in', so I searched and found a box that said something to the effect «... do not show a picture of connection...» » .  That started my problem!  Removing his login "icon" brings ONLY the following - FIONA!

  When connecting a Logon Message now says "the system could not log. Make sure your username and domain are correct, then type your password again.  Letters in passwords must be typed using the proper case" the choice for this error message is 'OK', which takes you to a login screen 'Type Win98' older Classic looking (no icon user) who was behind this logon Message, with (name) Fiona appears on the login screen (former) (full name and empty below the password) , with the choice to enter the password or a stop!

  Of course the password cannot be guessed (Yes - tried blank, admin, etc.) so the only choice is to stop.

  VA F8 at startup for 'Safe mode' goes to screen black WITH Fiona login screen as usual safe mode above and booting with the CD using NTPASSWD shows the usual 1) Administrator 2) 3) invited Ken and 4) Support Microsoft - NO FIONA is shown - and I put all these passwords to 'empty '. Of course repair and recovery repair 'R' does nothing on the removal of Fiona

  This translates the original message & Fiona connection again.  How can I return to screen "image icon" connection without losing files and mail Ken Ken. Where Fiona could hide when it is not a USER of the NET?

  Yet once again, I'd appreciate any help. Brian.

  You should be able to just select (click on) "Fiona", press the delete key, and then type any desired account name.  It doesn't work?

  If you cannot type on "Fiona" in the logon window, you can use the following procedure to modify the Windows registry... or you can take the computer to an independent repairer and ask them to fix it for you.  Don't go to a chain of stores, as a "geek squad" or BigBoxStoreUSA type of place.

  Go here--> https://www.raymond.cc/blog/how-to-edit-windows-registry-key-values-without-booting-in-windows/

  Choose method 1 or method 2.  I'm familiar with Hiren (method 2), but not with the program described in method 1 (even though it seems simple).  Any ISO file you choose, I suggest to download and use ImgBurn (free) to create your CD bootable from the downloaded ISO file.

  The registry key to change is in the same place as "userinit" (which is the example used in the article), so to follow 1-5 step method or method 2 for step 7.

  You will be at HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

  In the right pane of the registry editor, you will see a large list of items.  Scroll down the page until you see LogonType and double-click it.

  In the "Value data" box, type 1, and click OK (1 is the same either hexadecimal or decimal).

  Close the registry editor, take the CD from the drive and reboot.  You should see the Welcome screen when Windows restarts.

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• battery does not charge for the first time use

  Hi all

  Recently I bought HP pavilion 15 laptop. I kept it on the pricing of these last two days but the battery won't charge. When I check on power icon it says plugged in, load. Please help me in how I get it my fully charged battery.

  Thanks in advance for your help

  Hi ashluvuall,

  From what you described, it may be a bad battery or power cord.

  Please look back to where you bought the product and replaced it because it is under warranty.

  Don't waste time trying to fix it because it may be a hardware problem.

  I hope this helps!