The Bios in a Workstation virtual machine supports VT?

Similar Questions

• Z420 workstation: failed to update the BIOS on Z420 Workstation

  Hello

  I'm having a problem with the update the BIOS on a workstation Z420. Product LJ449AV number.

  The current version of BIOS is 1.02 09/03/2012 and the latest version of BIOS is 3.88 26/05/2015. I download the latest version of the BIOS, in the sp71579.exe file from here: http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5228608&swItemId=wk_149656_1&swEnvOid=405...

  When I try to use the HPQ Flash BIOS update utility, a message appears at the end of the stage of the new BIOS flashing indicating that a fatal error noccurred when flashing the BIOS. Error code = 0x0D (unknown error code). Here is a copy of the HPQFlash.log file:

  07/30/2015 09:41:04.228
  07/30/2015 09:41:04.229  --- START NEW HPQFLASH SESSION, HPQFLASH version 4.40.1.1 ---
  07/30/2015 09:41:04.231  Command line =
  07/30/2015 09:41:06.752  System name = HP Z420 WORKSTATION
  07/30/2015 09:41:06.753  System ID = 0x1589
  07/30/2015 09:41:06.754  System Serial Number = 2UA22509HT
  07/30/2015 09:41:06.756  AT-p supported = 0 (0:  not supported, 1 supported)
  07/30/2015 09:41:06.757  Version of BIOS in system:
  07/30/2015 09:41:06.758     Family = J61
  07/30/2015 09:41:06.759     Major version = 0x1, Minor Version = 0x02
  07/30/2015 09:41:06.761     Release Date = 03/09/2012
  07/30/2015 09:41:08.034  The binary to create HP_TOOLS partition is not present: 'C:\SWSETUP\SP71579\HPQFlash\Installer.exe'
  07/30/2015 09:41:08.096  Version of BIOS in ROM update (in CAB file):
  07/30/2015 09:41:08.098     Family = J61
  07/30/2015 09:41:08.099     Version = 3.88
  07/30/2015 09:41:08.100     Release Date = 05/26/2015
  07/30/2015 09:41:56.806  Don't need to Backup BIOS files.  Either system is not a laptop or BIOS does not support backup from USB device.
  07/30/2015 09:41:57.809  ***** Start FLASHING *****
  07/30/2015 09:41:57.833  Start Saving Original BIOS Contents
  07/30/2015 09:45:40.720  End Saving Original BIOS Contents
  07/30/2015 09:45:40.723  Start flashing (Write)  Attempt #1
  07/30/2015 09:45:40.724  Start Flash Rom Image (Write)
  07/30/2015 09:46:41.003  End Flash Rom Image (Write), bStatus = 0
  07/30/2015 09:46:41.006  End flashing (Write)  Attempt #1
  07/30/2015 09:46:41.008  ***** END FLASHING PROCESS *****
  07/30/2015 09:47:39.207  Exit hpqFlash:  Return Code = 0xd
  07/30/2015 09:47:39.209  --- END HPQFLASH SESSION ---
  

  When I try to boot from a USB stick and use the BACK Flash utility, the following text appears on the screen:

  Transferring System ROM... 100%
  Verifying System ROM...
  
  Error! System ROM is invalid.
  

  I tried to download sp71579.exe using two different computers on different Internet connections using different web browsers, but the same problems occur. I also tried to disable the antivirus, but that did not help either.

  Thanks for any help you can provide!

  "Old way" is the quote that comes to mind, and there is a link to a post on the Z620 mirroring of your question:

  here

  With very old BIOS versions like what you have, you will need to step up the BIOS versions in order.  You don't need to intensify in each version, just a couple of big no.

  Keep us updated... I think you will like the new BIOS versions, and I post it is better to update the BIOS to go into BIOS, rather than inside Windows.

• Can I use the same windows on my virtual machine?

  I had windows pre-installed in my dell laptop (Latitude E6420). I did not have the cd key but I extracted using a program called Magical jelly bean key finder. Now, I have the following information on my windows installation

  Windows 7 Professional Service Pack 1

  Product no.: XXXXXXXX

  Installed from media "OEM."

  Product ID: XXXXX-OEM-XXXXXXXX

  CD Key: XXXXXXXXXXXXXXXXXXXXXXXX

  Computer name: XXXXX

  Registered owner: XXXXX

  Registered organization: Microsoft
  Now, I want to install linux on my machine and use the current windows in a virtual machine inside the linux host. Is is possible if I completely uninstall this windows of my computer and reinstall the virtual machine with the same key?
  I'm not very familiar with this also can someone guide me what are the steps I have to take if this is possible.

  Hi Andre,

  Thank you for your answer, but this does not completely answer my question. I also read that OEM installation does not install the same windows on another machine (virtual machine is like different machine even if I do this on the same machine) and installation of the mine is OEM type.

  More important still, how install windows in the virtual environment? If I format the computer and install linux, in addition to this install virualbox and install inside windows that use the cd - key and it will work. ? I doubt it because the windows is already activated in this machine.

  The extract of the contract (EULA) for Windows 7 and applies to the retail and OEM of Windows 7 versions. So, Yes, you can reinstall it in a Virtual Machine.

  Yes, you will need to format the machine under Linux, then reinstall Windows 7 in a computer program virtual suitable as Oracle Virtual Box 4.2, VMWare Player 5.0 or VMWare Workstation. You can then use the product key located on the COA sticker to reactivate the license.

• Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine

  Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.

  # #SCRIPT_START

  $file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".

  $Import = import-csv $file

  $VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".

  $start7 = (get-Date). AddMonths(-1)

  $CDate7 = $start7. ToString('MM/dd/yyyy')

  $VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn

  $TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count

  $VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture

  Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta

  Invoke-Item $VMCreatedLast7RDayRepoFile

  # #SCRIPT_END

  You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.

  An example of this cmdley

  New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty

  In your case, you could do

  Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}

  But beware of negative numbers.

• Set the priority of restarting a virtual machine

  Hello

  I'm trying to set the priority of restarting a virtual machine in a cluster. I worked along THIS DISCUSSION to create this script:

  var myVcClusterDasConfigInfo = new VcClusterDasConfigInfo() ; 
  var myVcClusterDasVmConfigSpec = new VcClusterDasVmConfigSpec() ; 
  myVcClusterDasVmConfigSpec.operation = VcArrayUpdateOperation.add; 
  var myVcClusterDasVmConfigInfo = new VcClusterDasVmConfigInfo() ;
  myVcClusterDasVmConfigInfo.key = VM;
  myVcClusterDasVmConfigInfo.restartPriority =  VcDasVmPriority.high;
  myVcClusterDasVmConfigSpec.info = myVcClusterDasVmConfigInfo;
  var myVcClusterDasVmConfigSpecArray = new Array() ; 
  myVcClusterDasVmConfigSpecArray.push( myVcClusterDasVmConfigSpec ); 
  var myVcClusterConfigSpecEx = new VcClusterConfigSpecEx() ; 
  myVcClusterConfigSpecEx.dasConfig = myVcClusterDasConfigInfo; 
  myVcClusterConfigSpecEx.dasVmConfigSpec = myVcClusterDasVmConfigSpecArray; 
  Cluster.reconfigureComputeResource_Task( myVcClusterConfigSpecEx, true );
  

  Where Cluster and VM are objects of the WF input.

  Executions of thoughts scripts, however, in the CR, I get the error «the parameter of {entry.@enum.» InvalidDasConfigArgument.EntryForInvalidArgument} is not valid for the cluster.

  It's simple... but I just can't cope.

  Thank you guys

  Also I just realized... that the method I used is deprecated... grrr

  Here's the correct one:

  var myVcClusterDasVmSettings = new VcClusterDasVmSettings();
  myVcClusterDasVmSettings.restartPriority=VcClusterDasVmSettingsRestartPriority.fromString(priority);
  
  var myVcClusterDasVmConfigInfo = new VcClusterDasVmConfigInfo();
  myVcClusterDasVmConfigInfo.key=VM;
  myVcClusterDasVmConfigInfo.dasSettings=myVcClusterDasVmSettings;
  
  var myVcClusterDasVmConfigSpec = new VcClusterDasVmConfigSpec() ;
  myVcClusterDasVmConfigSpec.operation = VcArrayUpdateOperation.add;
  myVcClusterDasVmConfigSpec.info = myVcClusterDasVmConfigInfo;
  
  var myVcClusterDasVmConfigSpecArray = new Array() ;
  myVcClusterDasVmConfigSpecArray.push( myVcClusterDasVmConfigSpec );
  var myVcClusterConfigSpecEx = new VcClusterConfigSpecEx() ;
  var myVcClusterDasConfigInfo = new VcClusterDasConfigInfo() ;
  myVcClusterConfigSpecEx.dasConfig = myVcClusterDasConfigInfo;
  myVcClusterConfigSpecEx.dasVmConfigSpec = myVcClusterDasVmConfigSpecArray;
  task=ClusterName.reconfigureComputeResource_Task( myVcClusterConfigSpecEx, true );
  

• What is the advantage to affect multiple virtual machines in a data store?

  Hello

  Quite a question stupid and basic, but I can't answer . What is the advantage of having multiple virtual machines in a store of VMFS data instead of having each VM in another VMFS data store? (eg. 3 VMs in 1 data store or 3 data warehouses and each virtual machine in one of them). I can only think about the ease of management for storage administrator because it creates only a single large LUN.
  
  Thank you

  By allowing multiple virtual machines in a data store, you can run more than 256 virtual machines in a DRS cluster.

  As a host has a limit of 256 scsi identification numbers, which means that it accesses no more than 255 LUNS shared. 1 scsi ID is used for local storage.

  In a DRS cluster as each host must be mapped to the same data warehouses to ensure that virtual machines can be moved on the cluster and run on any of the hosts.

  Now in my life as an architect VMware PSO I saw that a lot of virtual machines that require a single data store. The main reason to isolate a virtual machine on a data store must provide sufficient i/o performance. This can be achieved with other solutions than to isolate a virtual machine on a data store. Having a properly architected storage subsystem is crucial, vSphere can get out of a very large number of the IOPS / s. With technologies such as SIOC and DRS for storage, you can check that the virtual machines receive IO performance according to the needs.

• Is it possible to hide the news of Vmware's Virtual Machine?

  Hello just a small matter of team.

  We have 5 ESX

  Is it possible to hide the news of Vmware's Virtual Machine during the creation of the Virtual Machine (not in registry) that we have a lot of VM?

  Start > run > msinfo32 >

  Thank you

  GoldTipu

  Hello

  It is possible that you could change some things in the registry, but there are many other "clues" as something being a virtual machine, such as the presence of tools VM, MAC address, drivers, etc.

• Need help updated the VMX file on several Virtual Machine

  All,

  Can anyone help with a problem I'm having?  Here is a brief explanation of what is happening and what we need to solve.

  Recently we found out that we need to add a line in the file VMX of several virtual machines.  In the past, I was able to do this, but would have cold start the virtual machine for the changes to take effect.  Starts cold won't be a problem, because we can program it.

  However, no one knows a way to add this line in the file VMX virtual machines in a cluster.

  Here's the line I need added:

  Devices.hotplug = "false".

  Here is a script that was used earlier (esx 3.0 days) to keep the VM tools updated on reboot.  At this point, if the virtual machine has been turned on, this change could not do through the UI.  However, this script worked to update the .vmx file and then we have cold reboots for the changes to take effect.

  Get-viserver - < Server > - < user > - < password >

  $viview = get-Cluster-name NOMCLUSTER | Get - VM | foreach-object {get-view ($_.ID)}
  $viview | {foreach-object
  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec
  $vmConfigSpec.Tools = new-Object VMware.Vim.ToolsConfigInfo
  $vmConfigSpec.Tools.afterPowerOn = 'True '.
  $vmConfigSpec.Tools.afterResume = 'True '.
  $vmConfigSpec.Tools.beforeGuestStandby = 'True '.
  $vmConfigSpec.Tools.beforeGuestShutdown = 'True '.
  $vmConfigSpec.Tools.ToolsUpgradePolicy = "UpgradeAtPowerCycle".
  $_. ReconfigVM ($vmConfigSpec)
  }

  The exact script can be found in Disable HotPlug

• Can I change the RAM available on a virtual machine without having to reboot?

  I would like to know if there is an option to change the RAM available on a virtual machine without restarting the virtual machine. I saw this old news item that says that it is

  possible (http://news.cnet.com/8301-1001_3-10044031-92.html), but I don't know how to do it. Any suggestions?

  Thanks in advance.

  Arne post, called PowerCLI: toggle the function add Hot VMs, shows how.

• Deleting the same files of many virtual machines remotely

  Hi all

  I tried to delete the same file several virtual machines remotely using the following script PowerCLI:

  $a = Get - VM | %{
  
  foreach ($nic as $_.) Guest.Nics) {}
  Write-output $nic. IPAddress
  }
  }
  foreach ($i in $a)
  {$b = get-WmiOBJECT-query "SELECT * from CIM_DataFile where Name='C:\\test\\deleteme.exe'"-computername $i}
  $b.delete)

  }

  It works perfectly when I run the script on the host virtual machines while I am running the script PowerCLI. When I Connect-viserver to another host however and try to run the script, I get the dreaded "RPC server is unavailable error (HRESULT: 0x800706BA)" for Get-WmiObject.  Virtual machines don't have Windows Firewall and have all TCP/IP, RPC and WMI services started, so who could eliminate any possibility.

  I am also able to run other scripts that use the Get-wmiobject across all virtual machines such as scripts to change the DNS or Netbios name across many machines on different hosts.

  Any comments would be greatly appreciated and please feel free to comment if you know maybe other ways which can delete files on multiple virtual machines in any other way.  Installation PowerCLI to run the script locally on each host would be a laborious process to do.

  Thank you very much!

  Best regards

  To solve the problem with the quotes, you can use double quotes inside the string. Like this:

  «del "«c:\documents and settings\text.exe»»»

  Or you can use for the string single quotes and double quotes inside:

  "del"c:\documents and settings\text.exe"

• How to open the workstation virtual machine in vmware server

  Hello

  How to open machine of VMware workstation, vmware Server?... is it possible?... can someone explain to me pls...

  To add a virtual machine to inventory

  1. Select the host in the inventory Panel.

  2 in the section orders the contents of the host tab, click on add a virtual computer

  Inventory.

  3 click Browse to locate the file of configuration (.vmx file extension) to the virtual

  machine you want to add to the inventory.

  The inventory column to navigate the file system.

  The content column lists the contents of the current directory.

  The information column displays detailed information about the selected directory

  or file.

  4 Select the configuration file in the content column and click OK.

  The virtual machine is added to the inventory.

  AWo

  VCP / VMware vEXPERT 2009

• How to connect the physical monitor in a virtual machine?

  I connected a monitor of my laptop, I want to use this screen for my virtual machine running Windows 7, so the virtual machine runs in fullscreen display them on the monitor and not on my laptop. Is this possible? I'm using Vmware workstation.

  WS = Vmware Workstation

  Your laptop must be supported using the second monitor as an extension on the desktop, only not in mirror as it does now. This is done from your video settings, has nothing to do with VMWare.

  Go into your video settings and see if the monitor shows up as Monitor #2, then look for a setting to put it right (or left) of your laptop monitor. My Thinkpad supports this mode.

  Check with the manufacturer of your laptop if necessary. Lou

• Distribution of the RAID in a guest virtual machine in Windows Server

  Hello

  Before I try this 'new', is it a performance advantage, or any particular configuration that would make any advantage of net return for a vm of comments Windows Server running on VM Workstation if I add a bunch of virtual drives and raid stripe them together via the Guest Windows Disk Manager. I would do that on a single disk physical host so I would venture to guess that the stress of the e/s on a disc single physical host can be a bottleneck in any scenario like that. I wonder if the VM Workstation has a way to compensate for the stress of IO because it presents me with a very impressive interface SCSI virtual (the one that allows a large number of virtual SCSI disks) and multiple SCSI channels. I have to admit that I already tried this scenario in a RAID Configuration 5 with eight (0-7) virtual disks on SCSI Channel 1 (a separate channel from the customer 'boot' virtual disk on SCSI channel 0 virtual machine.) In fact, it worked but was extremely slow. I hope that it is only because RAID 5 is a very demanding configuration on disk IO anyway so it is demanding a lot of physical i/o to the single disc physical host accordingly. However, I also hope that maybe a simpler configuration as striping RAID 1 could make a net profit of performance. The reason that I'm in any medium Green is because I observer that a guest running Windows 7 computer gets better scores to Performance Aero it's Windows 7 host (but that's another debate). Someone at - it here never geeked with scenarios of striping raid like that on VM Workstation 7.x configuration?

  Go ahead, say it. You know I'm a total geek

  See you soon,.

  Renato

  Hello

  If you do this on a single drive host I would expect horrible performance - just the opposite of what you want to acchieve.

  As Wil mentioned already... only several axes you can get best performance from disk

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• Tecra M10 - update of the BIOS says "this computer is not supported.

  Recently refurbished a M10 - 10I to reinstall the operating system. WinXP install at all so I try to update the BIOS as it seems quite old (V1.5). Most recent version (and is available) for this machine seems to be V3.0. Download and try to run the file "P0065V300" and get the message:

  Package for the TOSHIBA BIOS ver.3.3.0
  This computer is not supported

  What can I do? Its supposed to be for this model!

  Also, prefer a version of boot drive, but hey, I can use a version of Windows, assuming that it runs on Win7.

  Hello

  Tecra M10 - 10I belongs to the series of PTMB1E and according to the page of the Toshiba UE driver, BIOS v3.00 - WIN is the latest BIOS version which is available for this model.

  The BIOS update requires a few additional tools Toshiba as VAP (additional package for Win 7)

  If this driver isn't installed, the update of the BIOS would not work.

• Recognizing the hardware of a Windows virtual machine hosted on Linux

  Hello

  I would like stable windows in a virtual machine running from linux and run my VI labview and make the acquisition from there.  I tried once using Windows XP 32 - bit virtualized on ubuntu 64-bit, with Virtualbox, but windows setup does not recognize my card PCI-MIO-16-4.  Maybe its because I had not installed the linux drivers... I do not know.  Soon I will start using an FPGA 7853R with the PXI-1036 chassis and would prefer if my Windows installation virutalized could see this material.

  Anyone who crossed through the stages of the use of materials of a virtual Windows installation?  VirtualBox, Xen, Vmware or whatever...

  Thank you

  -Sidney

  Hello

  National Instruments do not support virtual machines, but I'm sure that your PXI will recognize by your system. Max peripheral use ethernet to find devices, so if your network works, you will be able to use it.

  Kind regards