The boot log errors

Similar Questions

• ORA-19504: failed to create the file, ORA-00270: creation of the archiving log error

  Hello
  
  Oracle 11 g 2 on windows 7, I of primary and standby on the same system (learning).
  
  When I check on status of primary and secondary use under request it gives applied log is 'NO '.
  
  SQL > select sequence #, used from v$ archived_log;
  
  SEQUENCE # APPLIED
  ---------- ---------
  516 NO.
  517 NO.
  NO. 523
  NO. 524
  525 NO.
  531 NO.
  NO. 532
  533 NO.
  NO. 541
  544 NO.
  
  When I checked error on DB primary .he give me more erro.
  SQL > SELECT 'ID', 'DB_status' STATUS DEST_ID, EXCURSION place "Archive_dest', 'ERROR' OF V$ ARCHIVE_DEST WHERE DEST_ID < = 5;
  ---------- ---------
  Error Archive_dest
  ------------------------------------------------------------------------------------------------------------------------------------------------------
  1 D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG ORA-19504: cannot create the file «»
  
  2 STAND ORA-00270: creation of the archiving log error
  
  I checked the space on the system... is there enough free space on the disk.
  
  On primary DB (destination of the journal archive)
  
  SQL > list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
  More old sequence of journal online 564
  Log sequence archive 566
  Current log sequence 566
  
  On standby DB (list of newspapers of record)
  
  SQL > list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive D:\app\kamdarvg\flash_recovery_area\test\ARCHIVELOG
  More old sequence of journal online 564
  Log sequence archive 566
  Current log sequence 566
  
  Please guide it's because of the destination of the journal archive even shared by the standby and primary?
  
  If yes how do I change the destination of the newspaper archive on standby DB?
  
  Thank you.
  
  Edited by: 977220 April 18, 2013 20:49

  change initialization parameter

• Is there a complete list of the event log error codes and their meanings

  I found a number of online search tools, but I just want a sheet of calculation/text file that lists all event codes view log.

  Anyone know where I can find this information?

  It does not exist.

  For reports on Windows XP Event Viewer and older versions of this web site are as useful as any:
  http://www.EventID.NET/

  For Vista and Windows 7 Google is the best source of information. Search for selected text in the Description part of the report (not of the particular words of phrases) that "this exact word or phrase" Gets the best results. Focus on Social Technet and Microsoft Answers reports in the last 12 months. Look elsewhere if a response is difficult to find.

  Here are some notes on the event viewer reports that can help you. When you have a lot of mistakes, you need to focus on system errors and warnings, even if it's the applications that are giving you grief. Problems with the first sorting system can do the easier application problems. Note the time that the computer is started last and deal first with those at the beginning of the boot. Correct previous errors can be solved later.

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes four major newspapers in Windows. These are application, security and system with Applications and Service logs as a source more details... For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the button copy on the general tab allows you to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Telephone call about the event log errors - they claim to be the Technical Support

  Original title: event error logs

  I get a phone call from a person claiming to be a b/c my computer Tech support has published many errors in the event log.  Is - is this legitimate?  He wants me to do stuff in the event log.

  Hello

  Yes, it's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• SQL in the event log error

  I'm starting a backup to perform an upgrade from 4.0 (3) 4.0 (5) and I looked over everything. The initial DBWalker went well, but I got an error in the log of events indicating "event 17055 + 3041 error id: BACKUP failed to complete the BACKUP LOG UnityDb TO UnityDbDump command. I know that this is related to the SQL DB, but I don't know if it's a critical mission that gets fixed before the upgrade, because I do not know if the error is streaming from the server itself or the backup system. I tried the Cisco and MS, but no one can isolate it down. Anyone encountered this before? And if so, is it a critical error or is there a workaround?

  Open Enterprise Manager

  Right-click on the UnityDb database, then select Properties

  Click the OPTIONS tab

  Change from SIMPLE to FULL recovery mode.

  Go to the task of backup every night, right click, select 'starting job. Check the logs of application after a few minutes

• the system log error message: error code 1, parameter 2 8a765bf0, parameter3, parameter4 00000001 8a75c7d0 8974dda0 000000ea.

  Hi - I have a trauma.  Not very technical, but changed my pc, now under XP SP3.  I am trying to launch an application for a Sonos controller (HIFI), but as soon as I run it, it blocks my PC.  Have tried to reinstall, but no joy.  Got this from the system log, but no idea where to start now!  Please help - thanks.  While I can browse a PC pretty well, all aid will have to be non-irritable, please!

  Hello

  Follow the methods mentioned in the article:

  http://support.Microsoft.com/kb/293078

  I hope that helps!

• SSH Session in the firewall log errors

  Cisco NIDS 4210 connected to 515UR PIX for fleeing host.

  Loss of connectivity between the two briefly and when the link is back to the top I see now what follows in firewall logs:

  SSH session (address IP of NESTS) on the inside for the user interface ' ' disconnected by the SSH server, reason: "Connection closed TCP" (0x03)

  These inscriptions are spend on all the 1 second.

  Suggestions?

  You do everything correctly; However, I forgot the most obvious thing!

  Some of the improvements PIX cause the SSH host key change. You trust the old key, but now the key has changed, so that the sensor plugs is no longer.

  Here is how you confirm this and correct. Assume 10.1.2.3 is the IP address of your PIX:

  Log in to the CLI IDS and run the following commands:

  probe # configure terminal

  Service sshKnownHosts Sensor (config) #.

  view the settings of Sensor(config-SshKnownHosts) #.

  rsa1Keys (min: 0, max: 500, current: 1).

  -----------------------------------------------

  ID: 10.1.2.3

  Exhibitor: 35

  Length: 1024

  modulus: 149179708427081921991314663521689741774756100495017439492530949884845471909428674644441439921263665830148866033670908370886898363392278142692283773831284783749668258827076536253701577307251585007783348971708045285375623731521532280202472737775552590541493491501955424294561124918251835488802734947343216844023

  -----------------------------------------------

  -----------------------------------------------

  Sensor(config-SshKnownHosts) # no id rsa1Keys 10.1.2.3

  output Sensor(config-SshKnownHosts) #.

  Sensor (config) # ssh - host key 10.1.2.3

  Fingerprint MD5 is A7:CF:FD:02:C0:A1:C9:10:64:A8:CD:4 A: BA:0E:C1:6 B

  Bubble Babble is xobal-vemyn-tasyn-rimef-nibiv-bodig-dylel-bekat-nacel-tupip-cuxix

  You want to add to the host known for this host table? [Yes]:

  exit Sensor (config) #.

  In this example, we see that the sensor has a key for 10.1.2.3, we removed, then re-confidence that host.

  After you approve that the new PIX ssh host key, the sensor must be able to establish a connection with the PIX and start it management.

• BlackBerry smartphones helps understand the event log created by JL_Cmder 1.9.3

  Hello

  I get an error screen when I start my BB (bold 9700) saying: error 102 JVM

  I have used JL_cmder 1.9.3 to extract the boot log, but I do not understand...

  Could someone décrypte for me?

  Here is the log:

  Hello Boomer!

  Thanks for your reply.

  I think I should have tried to follow the procedure here.

  And, in my case, try to delete the file net_rim_crypto_cms.cod.

  I have not tried if I understood during the reinstallation of the BB OS net_rim_crypto_cms appear to be associated .cod files.

  In my case, the error as soon as I restarted my BB; the company I was working for that cancelled my subscription. First of all, I had no network and after a reboot I got the error.

  Maybe this will help you to others...

  And the usual thing: back up your data!

  See you soon,.

• Cannot change the boot options. cannot depend on a windows Defender

  Cannot change the boot options. error message says "Windows Defender is disabled". cannot depend on windows Defender.

  If you use Norton, McAfee, AVG, MSE etc., they will be either disable or conflict with the Defender.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  For questions of security program, kindly ask in the Security Forum.

  See you soon.

  Mick Murphy - Microsoft partner

• Where can I find the startup log?

  I chose the boot log for start up and system indicates the startup log is selected but I can't find a startup newspaper anywhere. It's called something else? Where is he?

  Hi Pete.   Yes, the created file is called ntbtlog.txt and is located under the folder C:\Windows. MVP (Windows desktop experience)

• T500 w Vista hangs light w HDD and event log error iastor with ID 9 (Device\Ide\iaStor0)

  Summary

  Edited: This problem was finally resolved by Intel Matrix Storage Manager driver 8.6.3 sent by Lenovo, January 13, 2009

  It is an intermittent problem on 500/T400 with XP or Vista 32.

  Vista 32: the HARD drive light stays on for several minutes, sometimes never goes. The machine crashes immediately, or it may continue to work for a while sometimes sluggish performance w. In all cases the operating system stops not completely so that the HARD drive light is forcing a hard stop with the keyboard, button on / off.

  XP: random BSOD of iastor.sys.

  In the log window of the events is an event of error each time passed than the HDD light grip. Source is iastor, Id is 9, and the text is "the device, \Device\Ide\iaStor0, did not in the expiration time. See below for a description of how show all events iastor error 9 in your event log.

  The problem has appeared since the second or third week of December. The likely source is an update of the Intel Matrix Storage Manager, driver version 8.6.0 delivered on 4 December.

  This driver has been after December 4, distributed via Thinkvantage System Update. T400/500 made in December were also shipped with this driver installed. Since then, lenovo has withdrawn the driver, drivers, T400 and page software here and the T500 here page now shows the driver for Vista 32 and XP as version 8.2.4.

  The experience is that this problem is solved in the restaurant or by installing the 8.2.4 version of the Intel Matrix Storage Manager driver. If the 8.6.0 driver was installed through system update, go to Device Manager and open the Intel(r) ICH9M-E/M SATA AHCI Controller. On the driver tab, make sure that 8.6.0 is installed, and then click the roll back button.

  If the T400/500 has been shipped with the 8.6.0 driver installed, first driver to download the 8.2.4 and run the extract in the c:\drivers folder. Update driver then choose Device Manager. On the second screen appearing to ensure you choose "Let Me pick from a list of drivers on the computer' - in the case otherwise, he will tell you, best driver is already installed when you click Next. In the next screen, select Intel(r) ICH9M-E/M SATA AHCI Controller and click on "disk" and on the next screen, specify the path c:\drivers\win\imsm.

  PS review iastor in case connection error messages comparing them to the update system install history as follows:

  1. in Control Panel, in administrative tools, open the Windows event log. If this is not the first time, you use the newspaper, you may need to select the local newspaper - the top left - line for the Summary window to open in the Middle, you can maximize this window down.

  2. Select the error line in the Middle window and click Show all instances of this event on the right side. All error events are now listed in the Middle window.

  3. click on filter the current view on the right side. In the new menu, enter 9 in the field of event ID, select ok and then Yes.

  4. you should now have a list of all occurrences of the error in iastor event. Scroll through the list and note the timestamp of the first occurrence of the error.

  5. open Thinkvantage System Update, then select historical spectacle of installation. Scroll the window to the right you see the timestamps. Examine your updates, just before the message in iastor appeared first in your event log.

  __________________________________________________________

  Original entry

  My new T500 a few days after the execution of the first update of the system began to hang once or twice every 24 hours with light on HARD drive and "the device, \Device\Ide\iaStor0, did not in the expiration time" in the registry.

  ,

  iastor is the Intel Matrix Storage Manager (MSM) for their device RAID/AHCI controllers. The Intel AHCI controller listed in as installed for the T500 shows version 8.6.0 Device Manager, which is the current version according to the Intel web site.

  There are zero warnings to disk in the event log errors, I ran the drive diagnostic - the drive is healthy. I don't think that this is a problem of DVD or disc, it's the MSM which is a failure.

  Googling on the MSM error message there is a certain. A batch is since last year and concerns of Intel THAT MSM supporting properly - l/min, this has been fixed in MSM 7.5.0 see http://www.intel.com/support/chipsets/imsm/sb/CS-025783.htm

  A second batch was held earlier this year for Dell laptops that, without looking into the details, seems to have been caused by an incompatibility between the BIOS and the MSM reported. (Update system to update my BIOS to 1.20 - 1, 01).

  Other solutions to this problem found on the web include the removal of iastor/MSM settings in the Windows registry to disable l/min and turn off AHCI in the BIOS.

  It would be nice to be able to verify that this isn't a hard drive problem by disabling the AHCI and therefore the Intel controller. How to do that in T500 BIOS Setup and what are the implications on the performance of my drive (Hitachi 160 GB at 7200 RPM)?

  
  

• Spill of water caused my HP envy 4 to do that no boot device error.

  A planter fell my laptop asleep (activated but closed) and was there for no more than 5 minutes. Much water has flowed on the HDMI port and the lower right.
  The laptop worked well for a good 30 minutes then I had a sudden blue screen with the code F4 stop. I then turned off my phone and it turned back and the no boot device error apeard even if I turned off the laptop.
  Instinctively, I shook the laptop a bit and it seems to work fine for about 20 minutes, and then suddenly got the blue screen with the stop, even code again. This has happened for about 3 times until I let him all night.
  But now after that I left it all night I can't be on the laptop for more than 3 minutes without the blue screen that appears then the boot device error apears.
  Anyone who could help would be immensely appreciated.
  Thank you very much
  Jacob.

  Thank you, but somehow my laptop is now back up and running how it was before. However, I appreciate your time and your info.

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• We get an error "could not create a new partition or find existing. "For more information, see the Setup log file" error message "while trying to install Windows 8

  * Original title: 8 victory moved - Error Message: failed to create new partition...

  I have Win XP on my Dell Dimension 5150, which is the dual boot with Linux Mint 12 Lisa and this is my favorite of the bunch.

  I bought the DVD of 8 Pro Windows by an Australian retailer.

  Win XP is on a 39 GB partition with other application files. I had to delete several files to get the free space necessary to WIN 8 and finally finished by formatting the partition and passes for a COMPLETE new installation.

  Unfortunately, I now get the "failed to create new partition or find existing. For more information, see the Setup log file"error message. I can't find a Setup log file that I do a boot from the DVD.

  I tried to delete all external drives and other USB devices, including my Modem but my Wired USB keyboard/mouse.

  Two internal HARD drives are as follows:
  Disk 0 Partition 1-110 GB - system (LINUX)
  Disk 0 Partition 2 - 3.5 GB - logical

  Disk 1 Partition 1 - 47 MB - OEM (reserved) [DellUtility]
  Disc 1 2:Win - 39.1 GB - System Partition
  1 3 disk partition: DATA - 39,1 GB - logical
  Disk partition 1 4:OfficeProgs - 19.5 GB - logical
  Partition on drive 1 logical - 39.1 GB - 5:PROJECTS
  etc to score 8 with 9 MB of unallocated space.

  I have tried both 64 and 32 discs with the same result.

  As I have now is no longer no matter what Windows on my computer, what's the next step? If any ;-)

  Hello

  I solved the problem. It seems that you can not install on a secondary partition with in an earlier version of windows. You must restart the computer and run the installation from a dvd or other media.  Once you get the installation running you should be able to install on another partition without any problems.

  Nice day

• Victory 8 gel. Error Bluetooth Low energy in the event log

  System hangs after booting with a boot cold necessary to cancel the situation of hanging.

  I watched the debates, and even after disabling all startup services and by disabling the Windows option change the bluetooth power state, I always have the same question.

  Ideas anyone that I'm a little confused here.

  The local adapter does not support a large controller low-energy State. The State of minimum support is 0x1f7fffff, had 0x1f3fffff. The Low Energy functionality has been disabled

  The bluetooth adapter has also been entirely disabled and the above error is still constantly appear in the event log.

  I would also add that did system restore to a point before the hanging began and the problem persists.

  Discussions, as mentioned above:

  http://social.technet.Microsoft.com/forums/Windows/en-us/7c1a1839-93E1-498C-afe2-2b291539112e/Windows-8-hangfreeze?Forum=w8itprogeneral
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/Windows-8-random-freeze-only-when-using-Ethernet/c874dead-800C-476e-8F19-0288405ccd25

  I can give more information if necessary.

  Further investigation on the system showed that the SSD itself is at fault. Intel SSD Toolbox reports a flaw in the LBA in the same place every time.

  Looks like my second intuition as right all along the - hardware and no software to blame.