The BYU - TV app is available for Apple TV (tvOS)?

We know that BYU - TV app is available for the last Apple TV (tvOS)?  I'm not able to find a complete list of tvOS applications and I don't want to buy an Apple TV unless I know ahead of time.  Thank you

Well, I went on the site of byu - tv and discovered that it only works on Apple TV via AirPlay from an iOS device.

Tags: Apple TV

Similar Questions

  • IBooks are available for Apple products?

    I was in a discussion there is not whether long regarding why Amazon is more effective to sell books than iBooks.  I think I thought about it and I'm really tempted to pick up my book on iBooks.  It seems that iBooks are available for Apple devices.  If this is true, then it is a waste of time for me.

    The iBooks app is only available for iPhone, iPad, iPod touch and computers Mac, it is not a PC version of iBooks

  • BlackBerry Smartphones (App) not available for download from Blackberry App World

    I use a Blackberry Bold 9000 (personal use) on Bell Mobility.  The operating system is v5.0.0.681 (1137 Bundle, platform 5.2.0.64) and I'm in v2.0.1.12 App World.

    My App World worked well until I have asked me to set up my Blackberry ID.  Since then, App World is basically useless.  My main questions are:

    1. Whenever I try to connect on App World, I am taken to the additive screen of Blackberry App World membership.  I accept the conditions each time, but nothing is recorded, and I have to go through the same process the next time I log on.
    2. When I try to download updates to existing applications, I get the dreaded "...". not available for download on Blackberry App World. »
    3. When I try to download new applications (IE TSN Mobile), I get the same "... not available for download from Blackberry App World."

    After a very long session with Bell Mobility and RIM Technical Support staff, I was able to solve the problem I was experiencing.

    I initially created my Blackberry ID using my mobile device (9000 "BOLD").  Apparently, the program installation but unfinished and recorded properly and that was the root cause of all problems.  When I logged in Blackberry ID of my laptop, I was able to complete the installation in three steps process.  It was to download a plug-in on the Blackberry site, connect the phone to the laptop and then completing the installation program (including seizure of Paypal information, if you wish) on the laptop.

    After completing this process, I could connect the Blackberry ID on my mobile without having to go through the Blackberry App World membership additive and all my downloads have worked without error.

    IMPORTANT: the completion of recording Blackberry ID process must be carried out using Internet Explorer.  I had actually tried to do this a few days ago, but I've been using Google Chrome.  As a result, the global need App Plug In did not download properly on my laptop and I couldn't finish the rest of the installation procedure.

    I hope this helps other people who have faced this problem.

  • Air ipad 2 at the same price in different stores for Apple in California?

    Air ipad 2 at the same price in different stores for Apple in California?

    To different Apple store, Yes. Some other retailers can offer a small discount (Costco is about $ 20 cheaper, for example). but for the most part, it will be the same price regardless of where you buy it.

  • What money app is available for Surface RT?

    What money app is available for Surface RT?

    Hi Stanley,

     
     
    You can refer to:
     
    All about money
     
     
     
    It may be useful
  • I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

    I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

    Hi Bobsirkus,

    The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

    Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

    You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

    Kind regards

    Tanuj

  • Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

    Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

    If you had bought subscription Acrobat Standard / stand-alone product , you need to cancel the subscription / order and re - register / re - order subscription Acrobat Pro DC / stand-alone product.

  • How long the camera raw will be available for the new Canon 70 d?

    How long the camera raw will be available for the new Canon 70 d?

    The next Raw (currently in RC) 8.2 includes preliminary support for the 70 d

    http://labs.Adobe.com/technologies/cameraraw8-2-CC/?tabid=details#tabTop

  • What are the different types of tools available for the siebel file cleaning

    Hi all

    Please let me know what are the different types of tools available for siebel file system cleaning.

    Thanks in advance
    Remy

    assuming that you have installed the Siebel server under d:\D:\dba81

    CD D:\sba81\siebsrvr\bin

    (1) mode considered
    sfscleanup.exe/u SIEBEL-USER /p /C SIEBEL-word of PAST SIEBEL-DATA-SOURCE /d SIEBEL-OWNER of the TABLE/f SIEBEL-LEADER-SYSTEM/m SIEBEL-FILE-SYSTEM-FOR-INCORRECT_FILES/r Y/x 'D:\sba81\siebsrvr\log\sfscleanup_report.log '.

    (2) actual performance
    Replace/r Y, N/r

    Best regards
    EvtLogLvl

  • Shown music also purchased on the store page, but not available for purchase (cash receipt)

    I bought an album and three songs separate (Ed Sheeran 5 and Avicii Broken Arrows, For a Better Day and Waiting For Love) as I was charged and received an acknowledgement by electronic mail. They record as purchased on their individual pages in iTunes Store.

    At the time wherever I bought that I subscribed music Apple, and when this subscription has failed I want to delete songs and redownload them - I had messed with the news of multi - Ed Sheeran album, and it is no longer registered in iTunes as a 5-disc set. I deleted the Avicii songs with the rest of her album stories BEFORE Apple music subscription completed expects that they are always available for purchase but none of them are available here

    Did you check to see if you have them hidden in the Cloud: mask and unmask purchases iTunes or iBooks on your Mac or PC - Apple support ?

  • BlackBerry App not available for OS 10 world BB BB applications

    Blackberry world seems to work very well even if the app store before, BUT if I find an application designed for OS 10 through my pc, I can see it, but can not see through the storefront of BB on my Z10.

    Most frustrating that a number of applications I want is accessible through my pc, but not through the app store.

    Suggestions for remedy out there?

    PTS wrote:

    Hi Rob

    for example, the quick HSBC balance app; See http://appworld.blackberry.com/webstore/content/117921/?lang=en&countrycode=GB

    In the said info as its designed for OS 10, but my phone (z10) he can't see through world BB (version 5.0.0.131)

    ^^, It is the display of web pages.

    And I don't see anywhere it says "designed to OS10"... can you show me, or quote it?

    I see that it is available to all older devices BBOS inherited and no mention of BB10 devices.

  • CS6 Apps are available for installation through CCM?

    The issue arose on two or three messages FB I read...  With the CC Apps become available: can users who have NOT yet installed applications as part of CCM CS6 - for instance because they are a computer, or upgrade a computer - always access the CS6 apps for installation?

    CARI

    --

    Twitter.com/carijansen

    For more information about how to install the CS6 software version, please see download previous versions of Adobe Creative applications -http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-cr creative - applications.html

  • Alert for the ability of logical space available for guests.

    Hello

    I request assistance here. I activated a control host for LogicalDisk available capacity rule. The rule is the calculation of space based on the percent of available capacity. I want to put at the level of the GB instead of %.  As a result, if there is the 10 GB available on drive C alert must trigger.  Rule condition is as below. I just tried to multiply Host.LogicalDiskCapacityAvailable.fatal by 1024. But it did not work. I think it won't work because I guessed.

    #capacityAvailable #.<>

    any idea on defined this to draw attention to the No. of GB free space available would be geat.

    Thanks in advance.

    OK, it's a good thing to do, since % is not always the most important to watch.  for example, you must always 50 GB of free disk space on a data store, regardless of % in use.

    ALWAYS COPY A RULE, AND THEN CHANGE IT *.

    First, you must determine what you want to compare, and what threshold you want to compare to.  Unfortunately, this particular rule is not written very clearly as an example.

    The current rule uses a scope of VMWVirtualMachineLogicalDisk:

    The fatal rule condition is currently:

    try {}

    vmStateObjs = #vmState a $scope.virtualMachine #;

    tmpList0 = vmStateObjs?. values(vmStateObjs?. topologyObjects[0]);

    If (tmpList0 == null | tmpList0.size () == 0) {}

    Returns false;

    }

    vmState = tmpList0.get (0)?. GetValue;

    qObjs = #capacityAvailable a $scope.hostLogicalDisk #;

    tmpList = qObjs?. values(qObjs?. topologyObjects[0]);

    If (tmpList == null | tmpList.size () == 0) {}

    Returns false;

    }

    availbility = tmpList.get (0)?. GetValue?. getAvg();

    If ((vmState==null) |) (availbility == null) | ((! vmState?. equalsIgnoreCase ("poweredOn")))

    Returns false;

    @rulette_data ["VmState"] = vmState;

    @rulette_data ['Availbility'] = availbility;

    If (availbility<=registry("VMW:vmLogicalDrive.fatal")) return="">

    otherwise return false;

    } catch (System.Exception e) {return false ;}

    availbility is stored as 0-100 (%) of the total space on the logical drive.

    To create a rule that compares to the truly free disc, we need a different query

    to retrieve the "spaceAvailable", which is stored in megabytes.

    So, for our new rule, we will need:

    qObjs = #spaceAvailable a $scope.hostLogicalDisk #;

    tmpList = qObjs?. values(qObjs?. topologyObjects[0]);

    If (tmpList == null | tmpList.size () == 0) {}

    Returns false;

    }

    spaceAvailable = tmpList.get (0)?. GetValue?. getAvg();

    SpaceAvailable return;

    Now, we can change the comparisons in the criticism and Fatal to alert

    on the comparison of spaceAvailable to a new registry variable called

    Host.LogicalDiskCapacityAvailable.fatal which is set to a value of 10240,,

    et Host.LogicalDiskCapacityAvailable.critical which can be set to something like 20480.

    Both are in megabytes to match the scale of spaceAvailable.

    The new fatal rule would then be something like:

    try {}

    vmStateObjs = #vmState a $scope.virtualMachine #;

    tmpList0 = vmStateObjs?. values(vmStateObjs?. topologyObjects[0]);

    If (tmpList0 == null | tmpList0.size () == 0) {}

    Returns false;

    }

    vmState = tmpList0.get (0)?. GetValue;

    qObjs = #spaceAvailable a $scope.hostLogicalDisk #;

    tmpList = qObjs?. values(qObjs?. topologyObjects[0]);

    If (tmpList == null | tmpList.size () == 0) {}

    Returns false;

    }

    spaceAvailable = tmpList.get (0)?. GetValue?. getAvg();

    If ((vmState==null) |) (spaceAvailable == null) | ((! vmState?. equalsIgnoreCase ("poweredOn")))

    Returns false;

    @rulette_data ["VmState"] = vmState;

    @rulette_data ["spaceAvailable'] = spaceAvailable;

    If (spaceAvailable<=registry("Host.LogicalDiskCapacityAvailable.fatal")) return="">

    otherwise return false;

    } catch (System.Exception e) {return false ;}

    Notice that @rulette_data values defined in the Fatal plan.

    and then can be used in the critical level without recalculation them.

    The critical condition would then be:

    try {}

    vmState = @rulette_data ["VmState"];

    spaceAvailable = @rulette_data ["spaceAvailable"];

    If ((vmState==null) |) (spaceAvailable == null) | ((! vmState?. equalsIgnoreCase ("poweredOn"))) return false;

    If (spaceAvailable<=registry("Host.LogicalDiskCapacityAvailable.critical")) return="" true;="" return="">

    otherwise return false;

    } catch (System.Exception e) {return false ;}

    You can watch the behavior tab, you want to prevent "fly."

    If the available space goes above and below a threshold on a regular basis.

    You can to your rule set to something like a fire after 2 consecutive failures, wait for 30 min between.

  • How to find the latest version of material available for a virtual computer

    Hi, I have a problem to upgrade the hardware of the VMS version.

    My $vm = Vim::find_entity_view (view_type = > 'VirtualMachine', filter = > {'name' = > $vm_name});

    $vm-> UpgradeVM();

    Call to the UpgradeVM method I sometimes get an error saying: compatibility of the virtual machine is already up to date

    I can get the latest version of hardware verification $vm - > config-> version, but I don't know whether it is the latest version of material available. How can I find out who is the latest material available for a virtual machine before you upgrade?

    Thanks in advance.

    You can retrieve the list of configurations of operating systems, virtual material, supported, capabilities, etc. using the http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.wssdk.apiref.doc%2Fvim.EnvironmentBrowser.html EnvironmentalBrowser

    For the version of VTM, take a look at the QueryConfigOptionDescriptor() that returns a list of the ESXi hosts and VTM version, he takes in charge. Joint a screenshot using the vSphere MOB

  • is the flash player from adobe available for download anf usr on an anfroid s4 galaxy phone?

    What's adobe flash player available for download and use on an s4 galaxy android phone?

    Please see this page for a list of all certified devices:

    Flash Player Certified Devices - http://adobe.ly/KGWJvl

    If your device is supported, this FAQ will guide you through the process of manually installing the plugin:

    How to manually install Flash Player on my Android device? - http://adobe.ly/SLY91g

Maybe you are looking for

  • 80 GB, iPod Classic, Windows 10 synchronization problem

    Firstly, apologies if this is an ancient question.  There are so many threads that it is not easy to find the right one. My 80 GB Classic iPod has worked with Windows XP and Windows 7.  When I got a new computer and upgraded to Windows 10 iPod was se

  • Cannot use Skype subsription

    Hello I buy Skype subscription but I can't use it. What should I do?

  • HP Envy: Envy of HP 4520 all-in-one and Windows 10

    Hi team! We purchased through amazon.de 4520 Envy HP all-in-one. Just tried to install and connect wirelessly to my HP Pavilion G6. Our laptop was free update Windows 10 about 6 months, he has also kindly invited by HP. The installation of the HP Env

  • Compaq 500 b mt: lost the Operating System cd

    recently moved and lost the cd of the operating system, wanted to wipe my hard drive and start over, do not know what to do. can I get a copy, or do I have to buy a new one from Microsoft.

  • T510 - Dual graphics card

    I bought a T510 with Intel HD graphics and an NVIDIA NVS 3100 M Optimus graphics card running Windows 7 64 bit. How to switch between the two graphics cards use?  I only just found out that the Intel HD Graphics card, which seems a waste when I have