The captain El VPN Internet routing
I was able to set up a virtual private network and can connect to it. But can not get external ip addresses.
At one point, I was able to connect to outside the VPN network. I could check my IP to show that I was on my VPN network when I was somewhere else. I don't know why, but at some point it stopped working. The only thing I did at one point was to reboot the machine, but I don't think he was.
I've followed this how-to:
https://macminicolo.net/blog/files/setup-a-VPN-server-with-El-Capitan-Server%20. HTML
Redirection of DNS servers are on 10.0.1.1, 127.0.0.1
The VPN DNS is set to 10.0.0.1
After that stuff stopped working, I ran the script:
bash <(curl -Ls http://git.io/1UlbJQ)
But that just copy my entires I made by hand, so I deleted everything that has been redone.
I'm guessing there is something I am missing, or if there is a way for me to check if the routing is or is not happing maybe that would have me idea in how to get this back on track.
Yes on the client, I send all traffic over VPN set. When you use the VPN, I can not access google.com.
Nslookup works
Ping does not work with external areas, also if I ping IP that it doesn't.
The last time I saw a similar problem here report in these forums it was down the routing tables, as explained below.
- You have all the traffic of customers being forced to go through the VPN to the office network, I can tell that you are able to communicate with devices on your corporate network
- However, you can not contacted devices on the Internet once connected via VPN
It's probably to the fact that your office network is a network firewall on that or Internet router and one of them is the default gateway Internet for your corporate network. So the traffic will go since your Mac client via VPN on the office network, on office of firewall/router network, via the firewall/router to Internet, via Internet on the remote site, then back across the Internet to your router/firewall, then... get lost because your router/firewall knows where to send it to reach your remote Mac VPN client is not on the network of the company.
What you need to do is add a "static route" tell your firewall/router that all traffic destined to go to the network that you have defined for VPN clients should be "routed" via the VPN Mac server LAN IP address.
Note: According to the guidelines of Apple VPN clients must be on a beach in separate to your LAN network, so if your LAN is 10.0.1.x/255.255.255.0 then your range of VPN client should perhaps 10.0.2.x/255.255.255.0
Tags: Servers and Enterprise Software
Similar Questions
-
Client VPN access router to the Internet through the same router! How?
Hi all
I already setup VPN users connect to our router 1841 and corporate network. Use Cisco VPN Client and connection ends on the interface Dialer1 in 1841. This interface is also our ADSL Internet connection.
I need the VPN users out to the Internet via this VPN connection (it is through this Dialer1), rather than use the split tunneling and Internet browsing from their Local Internet service providers.
Of course, this Dialer1 is also 'nat outside' and FastEthernet is LAN and "nat inside '.
So I'll need NAT these VPN-pool addresses to address IP Dialer1. But what would be 'nat inside' in this case...
Can anyone help?
a loopback interface must be configured to "nat inside '.
for example
Loopback int 1
IP 1.1.1.1 255.255.255.0
No tap
IP nat inside
access-list 199 refuse ip<1841 private="" net=""><1841 private="" net="" mask="">
access-list 199 ip allow a
allowed policy-road route map 10
corresponds to the IP 199
set ip next-hop 1.1.1.2
interface Dialer0
political map of IP policy-road route
1841>1841> -
Hello
I'm still learning the VPN (IPsec), I was able to create a tunnel between my PC and my router, but now I want to connect two routers:
F0/1=192.168.0.1 ROUTER A-> INTERNET-> ROUTER B F0/1=192.168.10.1
Both routers receive an IP address from my ISP, I can't do a ping to a site at the other site, I mean, I am able to PING ROUTER A from ROUTER B with the ISP addresses and otherwise.
Two ROUTERS have the same configuration, except for the IP addresses and the ACL, they are opposite.
I think I know what I did wrong, but I don't know how to solve: the TUNNEL need also an IP from a POOL where should I put up, the ROUTER A or ROUTER B?
ROUTER
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
No aaa new-model
IP cef
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key cisco address 81.83.201.BB
!
!
Crypto ipsec transform-set esp-3des RIGHT
!
router_A_to_router_B 1000 ipsec-isakmp crypto map
set of peer 81.83.201.BB
transformation-RIGHT game
match address 101
!
interface FastEthernet0/0
DHCP IP address
automatic speed
full-duplex
router_A_to_router_B card crypto
!
interface FastEthernet0/1
the IP 192.168.0.1 255.255.255.0
automatic speed
full-duplex
!
!
no ip address of the http server
no ip http secure server
!
access-list 101 permit ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255
!
!
control plan
!
Line con 0
Speed 115200
line to 0
line vty 0 4
!
!
end
ROUTER B
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
No aaa new-model
IP cef
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key cisco address 81.83.201.AA
!
!
Crypto ipsec transform-set esp-3des RIGHT
!
router_B_to_router_A 1000 ipsec-isakmp crypto map
set of peer 81.83.201.AA
transformation-RIGHT game
match address 101
!
interface FastEthernet0/0
DHCP IP address
automatic speed
full-duplex
router_B_to_router_A card crypto
!
interface FastEthernet0/1
IP 192.168.10.1 255.255.255.0
automatic speed
full-duplex
!
!
no ip address of the http server
no ip http secure server
!
access-list 101 permit ip 192.168.10.0 0.0.0.255 192.168.0.0 0.0.0.255
!
!
control plan
!
Line con 0
Speed 115200
line to 0
line vty 0 4
!
!
end
!
!
!
!
!
!
Best regards
Didier
Didier, there are a number of things missing in your config file to make it work, what I can say fa0/1 is inside and the fa0/0 are outdoors. There is no NAT translation to activate the computers inside the network, allowing access to the Internet. You will also need to exclude the EIGRP NAT roads in order to reach the remote network. Each router must have a default gateway to the Internet, this should be done with the following command:
IP route 0.0.0.0 0.0.0.0 fa0/0 dhcp
This will use the default gateway of the DHCP server that assigns IP address on fa0/0. Once that each router has a path to another and the tunnel connects EIGRP will handle the rest given the information to the router 90, this is the spectacle of one of my spoke routers route:
NTR-2620XM #show ip route
Code: C - connected, S - static, mobile R - RIP, M-, B - BGP
D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone
N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2
E1 - OSPF external type 1, E2 - external OSPF of type 2
i - IS - Su - summary IS, L1 - IS - IS level 1, L2 - IS level - 2
-IS inter area, * - candidate failure, U - static route by user
o - ODR, P - periodic downloaded route staticGateway of last resort is to network 0.0.0.0 0.0.0.0
65.0.0.0/32 is divided into subnets, subnets 1
C 65.14.24.190 is directly connected, Dialer0
172.16.0.0/32 is divided into subnets, subnets 1
D EX 172.16.50.31 [170/3074560] via 172.19.8.1, 20:04:58, Tunnel0
172.19.0.0/24 is divided into subnets, subnets 1
C 172.19.8.0 is directly connected, Tunnel0
10.0.0.0/8 is variably divided into subnets, subnets 14, 6 masks
D EX 10.13.13.8/29 [170/2818560] via 172.19.8.1, 20:04:58, Tunnel0
D EX 10.11.7.0/28 [170/2818560] via 172.19.8.1, 20:04:58, Tunnel0
D 10.13.13.0/29 [90/2818560] via 172.19.8.1, 20:04:58, Tunnel0
C 10.19.9.0/27 is directly connected, Vlan200
C 10.19.8.0/24 is directly connected, Vlan100
C 10.19.10.0/28 is directly connected, Vlan900
D EX 10.20.7.0/24 [170/2818560] via 172.19.8.1, 20:04:58, Tunnel0
D [90/3097600] 10.22.7.0/24 through 172.19.8.1, 17:34:52, Tunnel0
D 10.37.4.0/24 [90/3074560] via 172.19.8.1, 20:04:59, Tunnel0
D 10.15.50.0/24 [90/3074560] via 172.19.8.1, 20:04:59, Tunnel0
D EX 10.24.40.0/24 [170/2818560] via 172.19.8.1, 20:04:59, Tunnel0
D 10.12.85.0/24 [90/3074560] via 172.19.8.1, 20:04:59, Tunnel0
C 10.19.9.192/26 is directly connected, Vlan500
D EX 10.244.0.0/22 [170/2818560] via 172.19.8.1, 20:04:59, Tunnel0
74.0.0.0/32 is divided into subnets, subnets 1
C 74.23.201.24 is directly connected, Dialer0
S * 0.0.0.0/0 is directly connected, Dialer0All designated routes D are dynamic routes drawn other routers on the DMVPN EIGRP. It will propagate the routing table and they point to the appropriate star. If you follow the example that I gave you, you will have a functional DMVPN.
See you soon,.
Sam
-
Termination of the client PIX VPN and Internet access from the same interface
Hello
VPN remote users connect to PIX (7.2) outside interface, but need to have these clients to access the Internet through the PIX outside interface as well. Need this because PIX IPs is registered and allowed access to some electronic libraries. One way would be to set up a proxy within the network and vpn users have access to the Internet through the proxy, but can it be done without proxy?
Yes, public internet on a stick
-
VPN is not talk for the subnet behind a remote router
Hi all
I was hitting my head on the wall for a few days everything that is wrong with my configuration ASA...
That's what I got:
AnyConnect vpn (10.10.70.0/24)-online tunnel => ASA5505 performer v9.1.2 (10.10.20.1)-online (10.10.20.2) router (10.10.50.1) 1841-online my environment tour (10.10.50.0/24)
VPN is allowed to authenticate, get an address, ping 10.10.20.0/24 but unable to pass traffic (ping, ftp, etc.) 10.10.50.0 network at all.
Using EIGRP between ASA and 1841, tried static set time 'network' then 'redisturbute' and the ' redisturbute static route-map ", still no luck.
Found several docs, tried, doesn't seem to help...
https://supportforums.Cisco.com/thread/2206416
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00809d07de.shtml
Help, please...
Attach the configs for the ASA and router
Thank you in advance!
Keith S.
Hi Keith,
You are using IKEv1 or IKEV2.
It comes to your configuration:
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1
Crypto-map dynamic outside_dyn_map 20 the value reverse-road
test of dynamic-map 10 crypto-card, the value reverse-road
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
The dynamic map that is applied to the interface is SYSTEM_DEFAULT_CRYPTO_MAP which is an ikev2.
But the question is not the one. Depending on your configuration, there is a runnning between the ASA and the router EIGRP and according to your router table routing does not know where is 10.10.70.0/24 subnet is. To inject the subnet pool VPN in the routing table that we need an arriere-route control that you configured on a card which is not in use. Try this:
Crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.
And let me know if it helps.
Thank you
Jeet Kumar
-
ASA problem inside the VPN client routing
Hello
I have a problem where I can't reach the VPN clients with their vpn IP pool from the inside or the asa itself. Connect VPN clients can access internal network very well. I have no nat configured for the pool of vpn and packet trace crypt packages and puts it into the tunnel. I'm not sure what's wrong.
Here are a few relevant config:
network object obj - 192.168.245.0
192.168.245.0 subnet 255.255.255.0
192.168.245.1 - 192.168.245.50 vpn IP local pool
NAT (inside, outside) static source any any destination static obj - 192.168.245.0 obj - 192.168.245.0 no-proxy-arp-search to itinerary
Out of Packet trace:
Firewall # entry packet - trace inside the x.x.x.x icmp 8 0 192.168.245.33
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit rule
Additional information:
MAC access list
Phase: 2
Type:-ROUTE SEARCH
Subtype: entry
Result: ALLOW
Config:
Additional information:
in 192.168.245.33 255.255.255.255 outside
Phase: 3
Type: ACCESS-LIST
Subtype: Journal
Result: ALLOW
Config:
Access-group acl-Interior interface inside
access list acl-Interior extended icmp permitted an echo
Additional information:
Phase: 4
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:
Phase: 5
Type: INSPECT
Subtype: np - inspect
Result: ALLOW
Config:
Additional information:
Phase: 6
Type:
Subtype:
Result: ALLOW
Config:
Additional information:
Phase: 7
Type: NAT
Subtype:
Result: ALLOW
Config:
NAT (inside, outside) static source any any destination static obj - 192.168.245.0
obj - 192.168.245.0 no-proxy-arp-search to itinerary
Additional information:
Definition of static 0/x.x.x.x-x.x.x.x/0
Phase: 8
Type: VPN
Subtype: encrypt
Result: ALLOW
Config:
Additional information:
Phase: 9
Type: CREATING STREAMS
Subtype:
Result: ALLOW
Config:
Additional information:
New workflow created with the 277723432 id, package sent to the next module
Result:
input interface: inside
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: allow
There is no route to the address pool of vpn. Maybe that's the problem? I don't know than that used to work before we went to 8.4.
Check if the firewall is enabled on your host from the client ravpn and blocking your pings.
-
How know if the router or modem cable is the problem with bad internet?
I have intermittent problems of internet home. The internet goes out for very short periods, then back on several times a day. At various periods of time, usually in bunches up. Then sometimes instead of being down for maybe a normal 15-30 seconds, it could last 5-20 minutes. And there are also periods of hours sometimes where the speed is VERY slow.
When he is not at all working, Airport utility looks like in the following screenshot, with the orange Internet and other green devices. Sometimes, it only shows the Internet icon and light, with nothing else underneath. If the internet is very slow (and I mean really slow, like minute 2 page load or not at all), everything is green, including the Internet icon.
It is the Charter cable with a modem surfboard, connected to an older Airport Extreme (in mode not wireless) model, which is connected to three aircraft from the airport, you can see in the screenshot. Everything works very well for 8 years, but these problems have taken place in recent months. I replaced since the cable modem for a brand new, I have reset the Airport Extreme to the factory settings and tried all sorts of other things.
It isn't the wireless aspect, because I can connect a computer to the ethernet jack and it has the same problems.
So here's what I want to know: is there a way I can tell if it's the Airport Extreme or if it's the Internet Charter being flaky? (I know it's not the cable modem because it does the same thing that before I replaced it). I just want to isolate the problem. I don't want to succumb to Charter calling again, as we think the run around, I'm going to forward all tech would come home, and they never admits to have flaky internet.
I bought a bolt of lightning to Gigabit Ethernet Adapter so I can plug my Macbook Air directly into the cable modem, without going through the Airport Extreme, but internet is not stay down long enough for me to access, plug it in and reboot the cable modem. Frustrating.
Suggest that you connect the MacBook Air directly to the modem, connect the Mac to the Internet and keep an eye on the MacBook Air from time to time for at least one day complete. A few days would be even better, if possible.
If the connection remains strong during your 'test', based on other information that you provide as...
connected to an older model Airport Extreme
and
Everything works very well for 8 years
The first thought that comes to mind is that life expectancy, on average, for airport routers is about 5 years. It's on food, on average, at the start of the descent position. Momentary grave start occurring, and the drops will increase in frequency over time.
It is a bet of $20, but you might consider replacing the external power for AirPort Extreme see if that provides any assistance. This does nothing for the internal power inside the airport of course components.
-
LAN problem: Vista PC does not connect to the XP PC through a router
My setup: laptop XP SP3, laptop Vista Home premium SP1, Fritz! Box 7270 as ADSL Modem, router and gateway.
Since the Installation of the SP3 on XP laptop PC Vista can no longer access the XP PC. Vista indicates the XP Machine occasionally, but cannot connect. Error 0 x 80070035. Ping from Vista to XP translates to time limit.
XP PC can connect to the Vista PC and use all the services available.
I am a user experienced with the good network of expertise. I checked the configuration settings and tested alternative parameters. I installed KB 922120V6-x86D DTBT Protocol on the XP PC. No change in the behavior of the network.
Internet connection through the gateway works fine on both machines.
Useful tips are very much appreciated
Karl
You have probably two firewalls running on XP is the first place to check. If you have a software firewall or antivirus/security of the third party with its own firewall component, the built-in Windows Firewall should not be running and it probably is. Or are looking for a firewall neglected in the VPN software if you use it. MS - MVP - Elephant Boy computers - don't panic!
-
no client AnyConnect vpn internet access
AnyConnect vpn client no internet no access.
Here is the configuration. Help, please.
Thank you
Jessie
ASA Version 8.2 (1)
!
hostname ciscoasa5505
!
interface Vlan1
nameif inside
security-level 100
IP 172.16.0.1 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP address 69.x.x.54 255.255.255.248
!
interface Vlan5
Shutdown
prior to interface Vlan1
nameif dmz
security-level 50
DHCP IP address
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 172.16.0.2
Server name 69.x.x.6
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service TS-777-tcp - udp
port-object eq 777
object-group service Graphon tcp - udp
port-object eq 491
object-group service TS-778-tcp - udp
port-object eq 778
object-group service moodle tcp - udp
port-object eq 5801
object-group service moodle-5801 tcp - udp
port-object eq 5801
object-group service 587 smtp tcp - udp
EQ port 587 object
outside_access_in list extended access permit tcp any host 69.x.x.50 eq imap4
outside_access_in list extended access permit tcp any host 69.x.x.52 eq ftp
outside_access_in list extended access allowed object-group TCPUDP any object-group of 69.x.x.50 host smtp-587
outside_access_in list extended access permit tcp any host 69.x.x.52 eq telnet
outside_access_in list extended access permit tcp any host 69.x.x.52 eq ssh
outside_access_in list extended access allowed object-group TCPUDP any host object-group moodle-5801 69.x.x.52
outside_access_in list extended access permit tcp any host 69.x.x.52 eq smtp
outside_access_in list extended access permit tcp any host 69.x.x.52 eq https
outside_access_in list extended access permit tcp any host 69.x.x.52 eq www
outside_access_in list extended access permit tcp any host 69.x.x.50 eq ftp
outside_access_in list extended access permit tcp any host 69.x.x.50 eq smtp
outside_access_in list extended access permit tcp any host 69.x.x.50 eq pop3
outside_access_in list extended access allowed object-group TCPUDP any host 69.x.x.50 EQ field
outside_access_in list extended access permit tcp any host 69.x.x.50 eq https
outside_access_in list extended access permit tcp any host 69.x.x.50 eq www
outside_access_in list extended access allowed object-group TCPUDP any host 69.x.x.51 EQ field
outside_access_in list extended access allowed object-group TCPUDP any host TS-778 69.x.x.51 object-group
outside_access_in list extended access allowed object-group TCPUDP any host Graphon 69.x.x.51 object-group
outside_access_in list extended access permit tcp any host 69.x.x.51 eq https
outside_access_in list extended access permit tcp any host 69.x.x.51 eq www
outside_access_in list extended access allowed object-group TCPUDP any host TS-777 69.x.x.50 object-group
outside_access_in list extended access permit tcp any host 69.x.x.54 eq https
access extensive list ip 172.16.0.0 outside_cryptomap_1 allow 255.255.0.0 192.168.50.0 255.255.255.0
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.0.0 192.168.0.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access all 172.16.0.32 255.255.255.224
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.0.0 192.168.50.0 255.255.255.0
access extensive list ip 172.16.0.0 inside_nat0_outbound allow 255.255.0.0 192.168.1.0 255.255.255.0
inside_access_in of access allowed any ip an extended list
Standard Split-Tunnel access list permit 172.16.0.0 255.255.0.0
access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 192.168.0.0 255.255.255.0
access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 192.168.50.0 255.255.255.0
access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 192.168.1.0 255.255.255.0
access-list SHEEP extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0
access extensive list ip 172.16.0.0 outside_cryptomap allow 255.255.0.0 192.168.0.0 255.255.255.0
access extensive list ip 172.16.0.0 outside_cryptomap_2 allow 255.255.0.0 192.168.1.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
IP local pool VPN_Users 172.16.100.10 - 172.16.100.20 mask 255.255.255.0
IP local pool anypool 172.16.0.9 - 172.16.0.19 mask 255.255.0.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 0.0.0.0 0.0.0.0
public static 69.x.x.50 (Interior, exterior) 172.16.0.2 netmask 255.255.255.255
public static 69.x.x.51 (Interior, exterior) 172.16.1.2 netmask 255.255.255.255
public static 69.x.x.52 (Interior, exterior) 172.16.1.3 netmask 255.255.255.255
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 69.x.x.49 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 172.16.0.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
card crypto outside_map 1 set 208.x.x.162 counterpart
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
card crypto outside_map 2 match address outside_cryptomap_1
card crypto outside_map 2 set pfs
card crypto outside_map 2 peers set 209.x.x.178
card crypto outside_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 3 match address outside_cryptomap_2
card crypto outside_map 3 set pfs
card crypto outside_map 3 peers set 208.x.x.165
card crypto outside_map 3 game of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 1
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 172.16.0.20 - 172.16.0.40 inside
dhcpd dns 172.16.0.2 69.x.x.6 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Server DNS 172.16.0.2 value
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
Group Policy inside sales
Group sales-policy attributes
value of server DNS 172.16.1.2 172.16.0.2
VPN-tunnel-Protocol svc
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split Tunnel
WebVPN
SVC mtu 1406
internal group anyconnect strategy
attributes of the strategy group anyconnect
VPN-tunnel-Protocol svc webvpn
WebVPN
list of URLS no
SVC request to enable default webvpn
username of graciela CdnZ0hm9o72q6Ddj encrypted password
graciela username attributes
VPN-group-policy DfltGrpPolicy
tunnel-group 208.x.x.165 type ipsec-l2l
208.x.x.165 group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group AnyConnect type remote access
tunnel-group AnyConnect General attributes
address anypool pool
strategy-group-by default anyconnect
tunnel-group AnyConnect webvpn-attributes
Group-alias anyconnect enable
allow group-url https://69.x.x.54/anyconnect
tunnel-group 208.x.x.162 type ipsec-l2l
208.x.x.162 tunnel ipsec-attributes group
pre-shared-key *.
tunnel-group 209.x.x.178 type ipsec-l2l
209.x.x.178 group of tunnel ipsec-attributes
pre-shared-key *.
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the icmp
!
service-policy-international policy global
context of prompt hostname
: end
Hello
You could start by adding the following configurations
permit same-security-traffic intra-interface
This will allow traffic to the VPN users access the interface ' outside ' of the SAA and to leave to the Internet using the same interface ' outside '. Without the above command, it is not possible.
Also, you need to add a NAT configuration for VPN Client users can use the Internet connection of the ASA
To do this, you can add this command
NAT (outside) 1 172.16.0.0 255.255.0.0
This will allow the PAT for the Pool of VPN dynamics.
Hope this helps
Don't forget to mark the reply as the answer if it answered your question.
Ask more if necessary
-Jouni
-
Impossible to access them Internert through the split tunneling VPN client.
I divided tunnel configured on a PIX 515. The remote VPN client connects to the PIX very well and can ping hosts on the internal network, but cannot access the Internet. Am I missing something? My config as shown below.
In addition, I don't see the routes on the VPN client via statistics (screenshot below)
All opinions are appreciated.
Rob
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
8.0 (3) version PIX
!
hostname PIX-to-250
enable the encrypted password xxxxx
names of
!
interface Ethernet0
nameif outside
security-level 0
IP address x.x.x.250 255.255.255.240
!
interface Ethernet1
nameif inside
security-level 100
IP 192.168.9.1 255.255.255.0
!
XXXXX encrypted passwd
passive FTP mode
DNS domain-lookup outside
DNS server-group Ext_DNS
Server name 194.72.6.57
Server name 194.73.82.242
the LOCAL_LAN object-group network
object-network 192.168.9.0 255.255.255.0
object-network 192.168.88.0 255.255.255.0
Internet_Services tcp service object-group
port-object eq www
area of port-object eq
EQ object of the https port
port-object eq ftp
EQ object of port 8080
port-object eq telnet
the WAN_Network object-group network
object-network 192.168.200.0 255.255.255.0
ACLOUT list extended access allowed object-group LOCAL_LAN udp any eq log field
ACLOUT list extended access allow icmp object-group LOCAL_LAN no matter what paper
ACLOUT list extended access permitted tcp object-group LOCAL_LAN connect to any object-group Internet_Services
access-list extended ACLIN all permit icmp any what newspaper echo-reply
access-list extended ACLIN all permit icmp any how inaccessible journal
access-list extended ACLIN allowed icmp no matter what newspaper has exceeded the time
Comment by split_tunnel_list-LAN Local access list
split_tunnel_list list standard access allowed 192.168.9.0 255.255.255.0
access-list extended SHEEP allowed object-group ip LOCAL_LAN 192.168.100.0 255.255.255.0
pager lines 24
Enable logging
Outside 1500 MTU
Within 1500 MTU
IP local pool testvpn 192.168.100.1 - 192.168.100.99
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list SHEEP
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group ACLIN in interface outside
ACLOUT access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 195.171.252.45 1
Route inside 192.168.88.0 255.255.255.0 192.168.88.254 1
Route inside 192.168.199.0 255.255.255.0 192.168.199.254 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac Set_1
Crypto-map dynamic outside_dyn_map 10 game of transformation-Set_1
life together - the association of security crypto dynamic-map outside_dyn_map 10 seconds 280000
Crypto-map dynamic outside_dyn_map 10 the value reverse-road
outside_map 10 card crypto ipsec-isakmp dynamic outside_dyn_map
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
internal testvpn group policy
attributes of the strategy of group testvpn
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
name of user testuser encrypted password xxxxxx
type tunnel-group testvpn remote access
tunnel-group testvpn General-attributes
address testvpn pool
Group Policy - by default-testvpn
testvpn group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:5dcb5dcdff277e1765a9a0c366b88b9e
: end
# 250 A - PIX
You have not assigned the ACL split tunnel to your strategy.
PLS, configure the following:
attributes of the strategy of group testvpn
value of Split-tunnel-network-list split_tunnel_list
-
When I go out or go to bed at night, I disable my wireless internet router. Sometimes I turn off when I just do something that doesn't require me to be online. Whenever I do this, Firefox continues implementing a warning window every two minutes telling me that I have no connection (that I know). How can I disable this window alert so it isn't keep appear in the middle of a game or a document that I do?
Its an addon, not firefox.
Start Firefox in Safe Mode to fix the problem and to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
-
Extension of wireless network with 2 capsules of time falls internet router
I have a fiber broadband from the Danish supplier, TDC. A port on the router, I connected a TimeCapsule 1 generation and one of its ports, I have a cable to a new TimeCapsule in another room. The first TC is set to create a wireless network and the new TC is set to extend a wireless network. Both are on the same wireless name and password and both have the clipping value. This is according to the instructions that I found here on the forum.
HOWEVER. When you use this router configuration mentioned above keeps falling and interruption of the Internet connection. What could happen?
If I let the TCs create two wireless router maintains a stable Internet connection.
On each TimeCapsule, there are a number of devices connected to their respective ports. All IP are chosen by DHCP. I assume that the router is the only DHCP server and that the CHT are not IP for connected devices.
Any help to solve this is appreciated.
To connect nr2 nr1 TC but not the TDC router. The ports on the TC are just parallel connectors (except the one that connects the modem). Then you must set both to create a network: you have two networks.
Then give them the same name and password (or not, what you want).
When you want to extend the network, do not connect the cable to the nr2, but you should put nr2 where he received the Wifi of nr1 and then extend it. This also works, but is much less bandwidth.
-
On the Satellite A100-784 Internet connection does not work
I use a Satellite A100-784 with Vista Home Basic and a US Robotics router. My question/problem is that when I discover the network connection, it shows I am connected to the router, but not to the internet even though I am.
It is a quirk of the Vista operating system or is it normal if you use a router? Should I worry or not?
Thank you all in advance and my apologies for the newbie question.
Each router must be configured and the right data ISP (internet service provider) must be inserted.
-Don't configure you the router?
-How about the TCP/IP settings? All the settings are set to automatic?
-How about firewalls? Have you used one or you turn it?
-Have you tested different browsers?Please check the points above.
-
BEFSR41: having the devices getting my other router IP
I have a wired linksys BEFSR41 running firmware 1.46 (having problems get a newer version upgrade, but that's another story).
I have other devices to obtain the IP address of another router that acts as my DHCP (assignment of the IPs in the 192.168.15.X range). The Linksys router is also get an IP address from the DHCP server, but the machines connected to the Linksys router are get the addresses in the range 192.168.1.x when I wish they were on the other (192.168.15.x). I disabled DHCP on the Linksys and that does not seem to matter.
I am doing a config IP on a PC connected to the Linksys and see an IP address in the range of 192.168.1.x but when I check the customer on the Linksys DHCP table there is no listed clients.
No idea how I can get the PC on the Linksys to get IP addresses in my other router? (looking for whatever the equivalent of "access point" is for a wired router)
Hello
Because DHCP is disabled on the BEFSR41, how you connect it to your main router? You can try to plug the BEFSR41 to the main router via a LAN to LAN connection. This means, among the routes numbered on your primary router goes to one of the numbered on your BEFSR41 port. Making the unused port WAN or internet. If the IP addresses on computers connected to the BEFSR41 still receives 192.168.1.xxx, try to ipconfig/release then ipconfig / renew on these computers.
-
With the help of WRT300N Wireless Router with a USB modem (satellite)?
Hey there! I tried to find this answer in various places online, and I saw a few things that have led me to believe that this is possible, but nothing to explain as thoroughly as I'd like. I have a N of Linksys WRT300N wireless router. For the next few months, new home construction we do service by cable or DSL, so we use the Cricket's broadband Internet, which connects via a USB port (Cricket is a 3G network, managed by a cell phone company).
I'm trying to understand if there is anyway that I can connect internet Cricket USB to my computer, as usual, but then connect my router to the computer somehow so that I can distribute this wireless signal? I'm having crazy to move the thing USB from one computer to another and would really like to connect my PS3 wireless signal, thus.
Does anyone have an idea how this could be done? If so, could you explain to me what I need to do quite exactly? I am running Windows Vista on this computer. Thank you very much in advance for your help. You're going to be spare me months with a value of pulling my hair out, believe me.
Yes you can do it, USB Modem not connecting to the computer, the computer must be connected to the Internet Port of the router and then it will give a Wi - Fi connection and...
To do this, you need to enable Internet Connection Sharing (ICS)...
Maybe you are looking for
-
I would like to stop paying 99 cents for my I have cloud storage. I want to cancel
I am being charged 99 cents a month because I have the cloud storage. How do I cancel this
-
Update phone to 9.3, and now I can't go to the links of email to Safari. Anyone else having this problem? Phone freeze
-
Satellite P750 blows a biting smell from the vents
My P750 blows a biting from the vents smell whenever the fan works. It has the date of purchase. I first thought that the smell will disappear after awhile, but now a month has passed and there is no change. Any ideas? Thank you very much.
-
Dead laptop, HP G61-406SA
Laptop will not power no LED, no hard disk or fan activity. Do hard reset, connect the adapter, get the power LED only, which turns off, when power key. Reinstall the HARD drive modules and memory. Always feed Download 19.7V adapter. Get 3.38v howeve
-
Using ThinkPad XP, cannot send files from mobile phone to the computer via Bluetooth
Dear Sir, Miss I am using my computer (ThinkPad, Windows XP for the sounds played in my cell phone and sent via bluetooth to the computer. Apparently the functions of connection and the computer receives something from cell phone (the "Bluetooth conn