BEFSR41: having the devices getting my other router IP

Similar Questions

• I bought the open eBay UK C, when I open my emails to gmail, the device gets stuck refreshing. I can't see the content of mail

  I bought the C open on eBay UK. I can see the list of my emails on the device, but when I click on the email address it gets stuck refreshing and I see no content of mail.

  I reset the phone and also to run an update of the software via the relevant application on the device.

  Please can help you? Thank you.

  I had a similar problem with the ZTE open running v1.1. I was not using Gmail, but my own IMAP provider. It turned out that my desktop e-mail client (Thunderbird for Mac OSX) created a strange trash where it shouldn't have been. Once I deleted this file, the phone worked again.

  You use a desktop e-mail client? Make sure you check the settings IMAP, especially how map you your trash folder on the desktop. Make sure that you store your messages deleted on the server.

  This is what solved the problem for me, and I stopped using Thunderbird.

• Can I store photos, I took on the devices Android and other digital cameras on iCloud photo library?

  Sorry for the noob question

  If you transfer them to their android device or digital camera to a computer, you can download them to the photo library Yes iCloud.

  http://www.Apple.com/icloud/photos/

  iCloud Photo library FAQ - Apple Support

  Set up and use iCloud photo library on your Windows PC - Apple Support

• Unable to delete the device, get message that it is write protected

  Original title: usb key

  Ive got information on a USB and want to remove it, but he says that it is write - protected how can I get rid of the info

  Hello 1 did you do changes on the computer before the show? 2. What is the full error message that you receive? Sorry to hear that. Would be not deleted if the unit is protected in writing or because of malicious content. I suggest you to reference methods listed below: Method 1: a. Click Start, click my computer b. right-click on the USB drive and select Properties c. uncheck the read-only option if it is turned on Note: Click Yes when the option appears saying apply the changes to the files writing to this folder and subfolders d. click apply and Ok e. try to delete the files Method 2: Run virus scan   Analyze the computer to remove all possible malicious content. See the site: Microsoft safety scanner http://www.microsoft.com/security/scanner/en-us/default.aspx. Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.   I hope this helps. If the problem is still not resolved, come back and I'll be happy to help you.

• BlackBerry Smartphones the device memory appears not

  I am accessing my device memory via mass storage. But when I connect with mass storage, I can only access the SD card. Happens also when I go into options-> memory - I see there is application memory, and card multimedia, but without memory of the device, as in other phones.

  Control programmatically for file:///store/home/user, shows it exists, and I am able to save files on it. -How to get back my device memory? Any one of these problems?

  Thank you

  Dan.

  Well, although not really a solution/explanation, I discovered I can explore my device memory if I go to the media in my home screen, then press explore - there, I can see all the files and manage them.

  If someone was so far, thanks for the attention

• Add the device tab

  Hi Im trying to add a device via my iPad 2 on the connected hp page but the device or any other tab does not work. Any suggestions?

  Hello Newbie94,
  
  Welcome to the Forums of HP Support!

  I understand that you are unable to access the tabs of HPConnected via your iPad. It is a problem with the Safari browser, Apple with Safari computers with the same problem.

  To access the tabs of HPConnected I propose to install Google Chrome on your iPad and use this browser.

  Chrome - browser by Google< -.

  See you soon,.

• iMac is not deleting the photos after deleting other appliances?

  I've recently upgraded to the 50 GB iCloud account and use it with my iPhone, the iPad, the MBP and iMac. So far when I remove a photo of one of the devices he removes other except my iMac. I have a lot of old photos on my iMac which are no longer in my other devices.

  I just checked and I have not iCloud library checked in option on the iMac and I just activated it.

  1. is there a way to CRT based on what I've done with other devices?

  2. a box of the photo library of iCloud not checked probably the problem?

  Thank you.

  Using iCLoud library when you delete - put on later will result in deleted photos from iCLoud on other devices in u-ploaded of the Mac

  LN

• The ip address of my router cannot be obtained by my cell phone, but he can get other computers. How can I solve the problem?

  Here is the ipconfig/all command information.

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: owner-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  WirelessLAN adapter Wireless Network Connection:

  The connection-specific DNS suffix. :
  ... Description: Intel(r) WiFi Link 5100 AGN
  Physical address.... : 00-1E-65-05-FA-DC
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e582:a22f:fef5:c1af % 11 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.193.175 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Local of EthernetAdapter network connection:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8102/8103 PCI-E FE Family NETWORK map
  Physical address.... : 00-23-5A-0D-E6-2A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {D57EF487-9E9D-4432-A3F6-09941DBAC
  B 9, 7}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 13:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {82CD5F3A-4FE2 - 41 D 2 - 9313-09635 C 287
  3A 1}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  

  0

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Printer HP B209a does not get the IP address of my router

  Computer is a HP G71 running under Windows 7 64-bit

  Router is a NETGEAR's WNR3500L with the latest firmware and a unique SSID

  Using the latest version of the software install HP B209a

  Towards the end of the installation for the wireless feature, the installation stops and tells me that my PC is on a network other than my printer.  All wireless devices connected to my router have 10.0.0 # IP addresses.  Through many installs the printers IP address is constantly as 192.168.0.109.  The summary on the printer wireless shows my unique routers SSID but when I open my router software and devices attached, the printer is not listed.  My router is attached to a simple DSL modem with no wireless features.  I tried the following hotfixes recommended in these forums.

  1. Connect the printer to the router through WPS with push button.  Connection is returned as a success, but identified printer router SSID as grabbled alphanumeric characters and not an IP address.  Router does not show the printer in the devices.  During the printing installation software PC and printer fail to communicate when the USB cable is connected.
  2. Connect the printer to the router through WPS with PIN.  Connection is returned as a success, but all the information in the router has been changed and all other wireless devices disconnected.  Connection to the router has shown the SSID THAT became grabbled of alphanumeric characters and the security key was changed.  No wireless device was attached to the router, but the wired connections remain intact.  Fixed key SSID and security.  All other wireless devices back in place, printer does not have.
  3. Ping network devices.  Ping 10.0.0.1 to 7 came back as successful.  192.168.1.109 ping failed.
  4. IP address of the printer has entered into a browser address bar.  Returns a Google search page, but not for access to the network printer.  Address of more than one entry address bar and couldn't connect to 10.0.0.1 (router) and 192.168.0.1 (DSL modem)
  5. Unplug the DSL modem router.  All wireless devices to connect to the router but do not have access to the internet.  During the installation of the printer software, when you are prompted to connect the USB to the PC, printer and PC fail to communicate.
  6. Turned off the Windows Firewall, both public and private without success
  7. Used the Hp network diagnostic utility and it does not can find printer.

  I have installed and uninstalled the software several times.  The printer has always identified my identifier SSID is correct and the network key.  But during the finalization of installation I get the message and cannot connect PC printer because they are on different networks.  I have no idea where the printer receives the IP address.  It should be an address from the router, but it is not.  IP address of the modem DSL IS in the format # 192.168.0, but given that the modem is the base model with the wireless or network capabilities, the printer cannot logically connect to it.  I tried to unplug the router and the printer several times without success.  The possibility of changing the IP of the printer through the browser is not possible for the reasons given in 4.  What are the other options to change the IP address of the printer?  If I can assign an address # 10.0.0, I think it will solve my problems.

  Is your DSL modem is a modem/router combo (most are)?  If so, it probably has a structure of 192.168.0.X and is probably a wired router (only).

  This DSL modem/router is attached to the WAN, or one of the LAN ports on the back of the Netgear?  Try to move to the other type of port, and then restart both routers.

  On the front of the printer, click the settings 'Restore defaults' and wireless the wireless radio.

  Finally, the Netgear settings, here are some tips:

  1 make sure that DHCP is active, the SSID is not hidden and that MAC filtering is not enabled.

  2. ensure that the 802.11 g mode (as well as other modes is very well).

  3. use WPA or WPA encryption, not WEP (it is not secure and may cause connection problems)

  4 change the channel of the Netgear to 11 (Yes, I know it makes no sense, but it works).

• my wireless connection says "restricted access" no network connection. I used the same key code to get my other computer online

  my wireless connection says "restricted access" no network connection, I used the same key code to get my other computer I can have up to 5 computers online at the same time online.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  This means that the computer cannot connect to the router.

  Try this process.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  Above everything is OK, you must be able to connect to the router.  A window that says connected does not mean that you are really connected. Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see. If it is not connected in the log to router from any computer that can connect to the router wirelessly with a wire, disable wireless security, (make sure that the wireless SSID broadcast) is on and try to connect with no. wireless security.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• Get the location of the device

  I had my application built with HTML5 for OS7, I build for BB10 and I decided to go with a feel more native and waterfalls. I must admit however, the old WebWorks documentation was much wasier and friendly, you had a small example of using each feature.

  I'm having a problem getting the location of the device, I went through the sample application "Diagnoses of the situation", but it's really complicated (he has 3 classes of objects with a ton of features to get the location).

  I'm just trying to find the location of the device, using cell towers, every two minutes. I want to create and the entire class for this? Also, how to trigger this function of the part of Cascades?

  I'd appreciate any help!

  Hello

  Here's a simplified example of code. These files are from the empty project template by default in the IDE of Momentix (file-> New-> project-> BlackBerry Project-> Application of stunts-> empty project Standard). They have been updated to include cellsite positioning updates every two minutes. The output will simply through cost.

  applicationui.h:

  // Default empty project template
  #ifndef ApplicationUI_HPP_
  #define ApplicationUI_HPP_
  
  #include 
  
  #include 
  
  using ::QtMobilitySubset::QGeoPositionInfo;     // so the SIGNAL()/SLOT() macros can have matching signatures.
  
  namespace bb { namespace cascades { class Application; }}
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class ApplicationUI : public QObject
  {
      Q_OBJECT
  public:
      ApplicationUI(bb::cascades::Application *app);
      virtual ~ApplicationUI() {}
  
      void startCellSiteUpdates();
  
  public Q_SLOTS:
      void positionUpdated(const QGeoPositionInfo & pos);
      void positionUpdateTimeout();
  
  private:
      QtMobilitySubset::QGeoPositionInfoSource * _source;
  };
  
  #endif /* ApplicationUI_HPP_ */
  

  applicationui.cpp

  // Default empty project template
  #include "applicationui.hpp"
  
  #include 
  
  #include 
  #include 
  #include 
  
  #include 
  
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app)
  : QObject(app)
  {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
      // set created root object as a scene
      app->setScene(root);
  
      // Instantiate the default QGeoPositionInfoSource
      _source = QtMobilitySubset::QGeoPositionInfoSource::createDefaultSource(this);
      if ( _source ) {        // connect to the QGeoPositionInfoSource's signals, to get the position info and/or error status
          connect(_source, SIGNAL(positionUpdated(const QGeoPositionInfo &)), this, SLOT(positionUpdated(const QGeoPositionInfo &)));
          connect(_source, SIGNAL(updateTimeout()), this, SLOT(positionUpdateTimeout()));
      }
  }
  
  // call this method to start the position updates
  void ApplicationUI::startCellSiteUpdates()
  {
      if ( !_source ) {
  
          std::cout << "Error getting default position info source" << std::endl;
          return;
      }
  
      // QtLocation allows control over which provider(s) will be queried for position info. NonSatellitePositioningMethods
      // includes wifi and cellsite fix types.
      _source->setPreferredPositioningMethods( QtMobilitySubset::QGeoPositionInfoSource::NonSatellitePositioningMethods );
  
      // On BlackBerry the default QGeoPositionInfoSource allows finer control over the fix type. This extension, and others, take advantage of the Qt property system.
      // Here we are interested only in cellsite fixes.
      _source->setProperty("fixType", "cellsite");
  
      // set the update interval to a couple of minutes.
      _source->setUpdateInterval(120000);
  
      // start the updates, which we expect to receive in ApplicationUI::positionUpdated()
      _source->startUpdates();
  }
  // slot connected to the QGeoPositionInfoSource::positionUpdated() signal
  void ApplicationUI::positionUpdated(const QGeoPositionInfo & pos)
  {
      // print out the position in a convenient format:
      std::cout << pos.coordinate().toString().toLatin1().constData() << std::endl;
  
      // print out the accuracy as well, if available
      if ( pos.hasAttribute(QtMobilitySubset::QGeoPositionInfo::HorizontalAccuracy) ) {
          std::cout << "    horizontal accuracy = " << (double)pos.attribute(QtMobilitySubset::QGeoPositionInfo::HorizontalAccuracy) << std::endl;
      }
  
  }
  // slot connected to the QGeoPositionInfoSource::updateTimeout() signal
  void ApplicationUI::positionUpdateTimeout()
  {
      std::cout << "timeout occurred" << std::endl;
  
      // On BlackBerry more information as to why the device timed out may be available:
      bb::location::PositionErrorCode::Type errorCode = bb::location::PositionErrorCode::None;
  
      if ( _source->property("replyErrorCode").isValid()  ) {
          errorCode = _source->property("replyErrorCode").value();
          if ( errorCode != bb::location::PositionErrorCode::None ) {
              std::cout << "    " << _source->property("replyErrStr").toString().toLatin1().constData() << std::endl;
          }
      }
  }
  

  And main.cpp looks like this:

  // Default empty project template
  #include 
  
  #include 
  #include 
  #include "applicationui.hpp"
  
  // include JS Debugger / CS Profiler enabler
  // this feature is enabled by default in the debug build only
  #include 
  
  using namespace bb::cascades;
  
  Q_DECL_EXPORT int main(int argc, char **argv)
  {
      // this is where the server is started etc
      Application app(argc, argv);
  
      // localization support
      QTranslator translator;
      QString locale_string = QLocale().name();
      QString filename = QString( "SimpleLocation_%1" ).arg( locale_string );
      if (translator.load(filename, "app/native/qm")) {
          app.installTranslator( &translator );
      }
  
      ApplicationUI * appUI = new ApplicationUI(&app);
  
      appUI->startCellSiteUpdates();
  
      // we complete the transaction started in the app constructor and start the client event loop here
      return Application::exec();
      // when loop is exited the Application deletes the scene which deletes all its children (per qt rules for children)
  }
  

  Your file bar - descriptor.xml must contain this line to allow approval of the app for location-based services:

      access_location_services
  

  Also to ensure that location-based Services are enabled under settings on your device.

  Your .pro file should contain this line so that the QtLocationSubset library is linked:

  LIBS += -lQtLocationSubset
  

  I hope this helps!

  Jim

• Sony walkman b172 unable to get the certificate of the device to transfer any music! Help!

  I have recenetly had my new sony walkman b172, I just installed and registered the device in my name, when I go to transfer all synchronization musicor music in WMP, it says Error failed to get the certificate for devices, please make sure that its not busy and try again, I tried different USB ports and everything but without success, anyone has any help at all please!

  Exactly the same problem with NWZ-E475. Some albums synchronize very well but others say... .not possible to get the certificate of the device...

  Why since on my old 4 GB Walkman the exact same files have been transferred OK?

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]