With the help of WRT300N Wireless Router with a USB modem (satellite)?

Similar Questions

• Error message 'Please select the access point or wireless router to set up' when you set up a network

  Original title: set up a network.

  I want to create a wireless network for the games, and when I click on the network. A screen comes written on this "Choose the access point or wireless router to set up" and that "it might take 90 s for devices reconfigured to appear on your computer.

  But no device never appears below it, even after 90 minutes.
  Please help me with this.
  It was so easy in windows 7.

  Hi Manas,

  What is the brand and model of the Wireless Router/Access Point?

  Given that the issue has not persisted in Windows 7, there is a chance that the wireless router/Access Point is not compatible with Windows 8.

  Please check the links below on the implementation of a network.

  http://Windows.Microsoft.com/en-in/Windows-8/Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows-8/what-you-need-Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  http://Windows.Microsoft.com/en-in/Windows-8/Add-device-or-PC-to-network

  Answer please if you have any questions.

• How can I connect my router to Windows 7 Starter?, I have the Belkin N 150 wireless router.

  I have the Belkin N 150 wireless router.

  Detailed information how do you need?

  What have you tried already?

  I assumed Wireless (links to general background information):

  Router

  These links can help (I hope) - http://www.mentorlog.com/2010/networkingwireless/setup-belkin-wireless-g-router-without-cd.html

  And for very basic info - http://thetechjournal.com/electronics/belkin-n150-latest-generation-wireless-n-router.xhtml

  Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Essentially in the router (after its all connected) set the type desired wireless "g" or "n" of work, implemented the encryption, you need WPA2 or WPA, put up the SSID and password, and set mapping in windows network sharing Center, set up a new connection or network.

• Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

  My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

  I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

  I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

  I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

  I need step by step instructions on this Yes please treat me like a fool!

  Thank you

  Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

  After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• Cable PC intervention user for the login information for wireless router

  It doesn't look good as I am typing, but I have recently installed a RE1000, which seemed to work fine. Then, on 3 PC's with no wireless card installed, we started to be prompted for the user name and password for the wireless router. Once I unplugged to extension, the problem disappeared. I know what you're thinking: maybe I just think that there is no wireless network on the PC card. NO, I looked in the Device Manager, and the only one network adapter installed is the ethernet adapter. Here are all the machines of 4 years and over with no hardware changes made these. Wireless adapters are not necessarily standard issue on old tricks - even on new towers. The Acer I use now was purchased new in November 2011 and did not come with a wireless card installed. So, I don't know what to think. Ghosts?

  Well, the answer was watching me in the face: each of these has a wi - fi enabled printer PC attached via the port USB. Disable WiFi on printer, requests for user name wi - fi router and stop PW.

  I was expecting ghosts.

• Since the installation of a wireless router, the computer does now recognize my digital camera's SD card. What should I do?

  Yesterday, we installed a wireless router. Now my computer does not recognize the SD card in my digital camera. I do not have

  idea how to solve this problem. Help, please

  Hello

  You can view these methods:

  Method 1:

  I suggest you to try the connection to differnet computer and check.

  Method 2:

  Try to insert this to other USB ports and check if it works.

  Method 3:

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  1. Click Start, type sysdm.cpl in the start search box, and then click OK.
  2. Click the hardware tab.
  3. Click the Device Manager button.
  4. Expand Bus USB controllers.
  5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  6. Restart the computer and reinstall the USB controllers.
  7. Plug in the removable USB storage device and test to make sure that the problem is solved.

• F380 printer with a USB modem / router does not work as a scanner

  Hello, I have a Hp F380 printer I've always used on my PC, in Windows 7, via the USB port.

  Given the need to print and scan from another PC on the same router modem, I tried to use the USB port master who is mounted on my modem router (Alice Gate VoIP 2 Plus Wi Fi), to which I have connected the F380 to share with the new PC.

  I followed the steps in the manual installation of the modem and everything was fine except for the use of the scanner.
  The scanner, you can not use because the HP Solution Center does not see the device if it is connected to a USB port on the local PC (I normally, I used this for my scans)

  Even try to use scanning directly from the "devices and printers", click the right button of the mouse over the device icon in the menu window F380 does not appear the scanning features that appear in the place when the F380 is connected to a USB port on the local pC.
  I also tried to analyse using paint, Windows live photo gallery and scanner and fax in Windows, but the problem is always the same: the scanner is not detected.

  Do you have a solution for this?

  Thank you very much

  Hello

  The scanner cannot be access via a shared printer. The printer must be connected directly to the device, or you must connect using a standard network connection.

• My wireless hp elite desktop eliminates the need for a wireless router

  Trying to connect laptop to desktop hp elite without adding a wireless router wireless

  Thanks, will try.

• With the help of a wireless printer with a laptop and desktop PC.

  I just bought a laptop wireless windows 7 and use a router to connect to my older vista desktop that has HP deskjetpro8500 on it. Should I upgrade my Vista to windows 7 and my printer upgrade then?  I'll be able to also use the fax, scanner and copier on the new laptop once I update the printer? What is my best option?

  Yorkville

  OK, unplug the USB cable from your printer and your PC.  Leave the telephone line connected like that.

  Now, to get an Ethernet cable (it looks like a large telephone cable) and plug it in between your router and the printer.  An alternative is to connect to the wireless printer, but it will have to have the wireless option.  This subtemplate is (a909a, n b or g)?

  After connecting the printer, click Start > Control Panel > devices and printers and delete all old instances of the printer, then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. (the IP address can be found on the network menu of the printer)
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• With the help of printer wireless HP Officejet 6500 with Windows 8.

  I have a HP Officejet 6500 wireless all-in-One printer and a laptop from Samsung with Windows 8.  How can I select print all, selection or Pages (option) when you print a document online or on my computer?

  I use a printer-E709n and thank you and all the others to try to help me with this problem, but I found the solution to my problem.  It seems that not all e-icons are not created equal.  I have internet access of the e icon on the start page of Windows 8 when I should have access through the e icon on the office page.  They take you to two different pages.  Open Web page through the e-icon of the start page has no internet tool gear symbol in the header (the symbol of charm tool gear does not bind to the printer either) and clicking on Ctrl-P does not bring to the top of the window to print even as in previous versions of Windows.  My spirit guide was able to get this information for me.

• Im trying to print from the reinstall a new wireless router. Printer does not print.

  Brother printer. Clear spot wireless. can't understand why printer won't work/print.

  Hi John,.

   
  1. What is the model of your printer?
  2. What is the operating system installed on your computer?
  3. you receive an error message when you try to print?
  4 are you facing this problem with a particular application?
   
  I suggest you to follow the steps in the link and check if it helps.
  Printer in Windows problems
  

  You too, try to print a test page and check if it helps.

  Print a test page for Windows Vista

  Print a test page for Windows 7

• Wireless connection failed because windows did not receive response from the access point or wireless router

  Monday Nite I downloaded a driver site HTC syn my Android Hero phone. After extracting and installing the driver in the zip file, I tried to sync with my phone which was hook up my laptop. It did not work. Interrupt the synchronization process and I tried to check my email from outlook. Found it cannot send and receive mail. Open my browser and found that it disconnected. And so, using the LAN cable, fortunately, it worked. So I wonder what is happening to my function wireless on my laptop?

  Can someone tell me what I need to do? Thank you very much.

  Hello

  Search for updated drivers and reinstall if no later by using the procedure below.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HP Laser Jet 8600 Plus: re - set the printer for new wireless router. I use a Mac.

  I just installed new internet.  How can I reset my HP Laser Jet more than 8600 to print?  I use a MAC not a PC!

  You can use the Control Panel before the printer via the network settings menu.

• connect the dsi to wireless router

  I can't connect dsi to wireless router, getting the gray padlock that tells me to take the WEP security, I don't know how to do, or what it means in fact!
  Thanks for your time

  Hi Juliehoskin,

  Welcome to Microsoft Windows Vista Forums.

  This error message is usually caused by problems with WEP key.

  Change the wireless security settings is normally done within the parameters of security wireless router page. For more information on how to access this part of your router, you can get your information from router on the internet using your favorite search engine or consult the router's manual or contact the manufacturer of the router for more help.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.