The catalog import error

Similar Questions

• The catalog import

  I'm trying to synchronize annotations on images between two catalogs.  When I try to import from a catalog, Lightroom seems to stop.

  My main catalog has about 96 000 images.  I exported 870 pictures to another catalog, and my assistant update ratings on those.  When I grew up in LR and tried to import updates from the small catalog in the big catalog, it took over an hour for LR finish "modified photos check duplicate '.  Then, when I told him to go and import metadata updates, it ran for hours without any apparent progress.

  I looked around and seen only in some versions of LR, there is a problem of importing catalogs in the 64-bit version.  I used the 3.4RC 64-bit in Windows 7 with 6 GB of memory.  I tried the 32-bit version of 3.4RC and had the same results.  I tried the 32-bit and 64-bit of LR 3.3 and saw the same behavior.

  Is this normal performance of the catalog import?  A bug in LR?  Or I do something wrong?

  My ultimate goal is to allow my assistant to rate on his computer images, and then re-import the votes in my main catalog.  I'd be also interested in any suggestions on a better way to handle this.

  Thank you!

  David

  You n ' want to be copy/move the file unnecessarily. Fortunately, it is possible for the two parties to share the same files on a network. So, it would be the way to go.

• Problems with playback of photos after the catalog import

  I just imported 400 pictures in a catalog from an another catalog on another computer and post a link to the source files (also copied from another computer), I get an error message (see screenshot). When I opened the photo to develop, I get the message that file access denied. Any ideas? Thank you

  I just imported 400 photos in a catalog to another catalog and I get an error message

  Hi rugfoot,

  Indeed, by using the wireless network can most of the time can cause permissions problems.

  Concerning

  Rohit

• Permissions in the catalog server error 500 - internal error

  BIPublisher 11.1.1.7

  11.2 Solaris

  Get the following error message when you try to set permissions for a folder.

  

  Error 500 - Internal server error

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.5.1 500 internal Server Error The server encountered an unexpected condition which prevented him from meeting the demand.

  my journal of managed server throws this exception

  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-101020') OR (MSGID = "WL-101017'") OR (MSGID = "WL-000802'") OR (MSGID = "BEA-101020'") OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))

  [WatchData: DATE = August 21, 2015 16:52:08 ECT SERVER = bi_server1 MESSAGE = [path of the module: xmlpserver ServletContext@921440758[app:bipublisher: / xmlpserver spec-version: 2.5 version: 11.1.1]] Servlet failed with Exception

  java.lang.NullPointerException

  at oracle.xdo.servlet.resources.action.ListFolderPermissions.execute(ListFolderPermissions.java:90)

  at oracle.xdo.servlet.resources.action.ActionServlet.service(ActionServlet.java:45)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:124)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  My catalog is defined as file system

  This fixed tanks to this blog

  https://orclfmw.WordPress.com/2015/02/10/500-internal-server-error-when-granting-permission-in-bi-Publisher/

• The catalog import and copy

  I replaced my computer and now reinstall lightroom and created a new catalog and wanted to import photos and the backup, however, lightroom does not offer me the copy function, why?  How to operate?

  This is not the right approach. You should not import your photos.

  You must move the photos to the new computer, preferably in the same place, as they were on the old computer. You have to find your old computer catalog file and move it to the new computer, and double-click it.

• 32-bit. The RPF import error

  Try to import a 32-bit. RPF sequence of 3ds Max produces this error:
  This file format has not yet been revised to draw in worlds of float
  (39: 39)

  

  I found this ' 09 thread that suggests that there might be a problem
  with the import of 32 bits. RPF and. Max RLA files:

  Re: (39::46) error Code

  I have a new made to 16 bit, and there is no error when importing.
  Are 32-bit. RPF of the file not supported in Ae?

  That's what this line in the section "Supported import Formats" of the ways to help After Effects:

  "RLA/RPF (RLA, RPF;" 16-bit/channel; imports data from the camera)"

  If you need the ability to import data from the RPF 32-bit, you can submit a request here.

• File produces the following import errors: bad entry for OVPSMatrix: 1. #QNAN 1. #QNAN 1. #QNAN 1. #QNAN

  original eps file have prob

  I have check

  no prob

  Why this error during preflight

  Try to open the saved eps Illustrator as an .ai file original and use it instead.

• Error importing the catalog

  Hi all

  Earlier, I exported a number of images of my main catalog to a separate working catalog.  Now, I'm ready to merge these changes and additional images in the main catalog.  I opened the catalog main, selected the catalog import and select the catalogue of work.  LR cranks for a while, and then he shows me the dialog box asking how to handle the new images, where I select to copy new images in the catalog.  I then start the import and quickly get an "Unexpected error" dialog box and import process stops.

  When I use the Mac Console application, I see the following error messages:

  18/07/11 18:07:24 Adobe Lightroom 3 [393] AgStoreProviderSession ERROR?: 0: try to index a numeric value

  18/07/11 18:07:24 Adobe Lightroom 3 [393] AgImportFromCatalog unexpected ERROR cause doImportWithMainCatalogSession?: 0: try to index a numeric value

  18/07/11 18:07:24 Adobe Lightroom 3 [393] AgImportFromCatalog unexpected ERROR cause doImportWithMainCatalogSession?: 0: try to index a numeric value

  18/07/11 18:07:24 Adobe Lightroom 3 [393] [AsyncDataServer (hand Catalog.lrcat)] ERROR SERVER < AsyncDataServer (hand Catalog.lrcat) > process: a command threw an exception.

  18/07/11 18:07:24 Adobe Lightroom 3 [393] process [AsyncDataServer (hand Catalog.lrcat)] error:?: 0: try to index a numeric value

  18/07/11 18:07:24 Adobe Lightroom 3 [393] AgImportFromCatalog ERROR?: 0: try to index a numeric value

  18/07/11 18:09:46 Adobe Lightroom 3 [478] AgStoreProviderSession ERROR?: 0: try to index a numeric value

  18/07/11 18:09:46 Adobe Lightroom 3 [478] AgImportFromCatalog unexpected ERROR cause doImportWithMainCatalogSession?: 0: try to index a numeric value

  18/07/11 18:09:46 Adobe Lightroom 3 [478] AgImportFromCatalog unexpected ERROR cause doImportWithMainCatalogSession?: 0: try to index a numeric value

  18/07/11 18:09:46 Adobe Lightroom 3 [478] [AsyncDataServer (hand Catalog.lrcat)] ERROR SERVER < AsyncDataServer (hand Catalog.lrcat) > process: a command threw an exception.

  18/07/11 18:09:46 Adobe Lightroom 3 [478] process [AsyncDataServer (hand Catalog.lrcat)] error:?: 0: try to index a numeric value

  18/07/11 18:09:46 Adobe Lightroom 3 [478] AgImportFromCatalog ERROR?: 0: try to index a numeric value

  I tried to save two catalogs, integrity tests and optimize, without a change in behavior, any help would be greatly appreciated!  Thanks in advance.

  Mac OS x 10.6.8

  Lightroom 3.4.1

  Paul,

  To isolate the problem, I would try a couple of things:

  • Export catalogue of work in the catalog in another, and then import them from the exported catalog
  • Import the catalog of work in a newly created catalog

  Beat

• "Cannot use the catalog because it is not writable and cannot be opened.

  Lightroom 6.5 8.1 Windows

  I get this error message. However, the catalog is here. I also opened LR in administrator mode, but that doesn't help either.

  The old catalog in a new catalog import does not work either. I've worked since the last backup.

  You kindly give a retrieve from the catalog import tool?

  The permissions are set correctly, and as I said, I also started LR with administrator privileges. Same result.

  I ended up using sqlite, saved lrcat file in sql file and initialized in lrcat file. Everything works. I don't understand why Adobe does not offer a repair service to do the same. It cost me 30 minutes of searching on Google.

• The OME catalog import

  The version 2.0.1.222 OME catalog import fails with the following error:

  Import failed Dell Version order catalog for update of the system of ftp://ftp.dell.com/catalog/catalog.cab . Exception message: the stream is not an archive valid cab. Parameter name: flow

  Large.  Thanks for the update thread.

  Thank you very much

  Rob

• Virtually all of the files are missing after you import the catalog.

  I'm NOT sure that has nothing to do with lightroom, except that yesterday my files were all there, now, they are absent.  It could be a hard disk failure.  Its just strange that it affected only the files that I tried to interfere in my lightroom catalog today.

  Well as out of town, I pulled a few thousand photos and them ingested on a daily basis in a new lightroom catalog that I created on my laptop.  Files imported into a USB external drive.  The laptop is win 10.  It is on the latest version of lightroom, CC.  Yesterday, everything was going well with the catalog, disk, and files.  All were there.  The catalogue and the photos were on the same drive.  The laptop was listed as the letter 'g ':

  Once I went back to the office today, I wanted to import pictures to my largest catalog on my desktop.  I have used this external hard drive for all my new photos in 2016.  On this PC, Win 10, the letter of the external drive is also "X:".  I started lightroom in my big catalogue very well.  I chose to import from a different catalog, accessed my X Catalogue outside in the car and started importing without a copy of the files.  This should leave the files in the same location.  It took a little more time I expected to import this catalog.  When I went to the structure of folders inside lightroom, it seemed that all the files have been imported correctly.  But there was a "?" from the folder.  I assumed that I just needed to do a "find" on the X drive as I thought that my lightroom catalog could have been pointing to the G drive.  Locate, but cannot find the files.  I've used windows explore to browse my files and the folders and files were all missing, with the exception of a folder where I shot some photos with a camera, about 100 photos in all.  Thousands of photos from other cameras were all absent.

  So next time, I ran a scan disk and windows came with a message of repair.  The repair said that it worked successfully.  But I looked in the Explorer, the files were still missing.  I ran a scan disk again and no error found.

  I looked in the trash on the desktop and there is no files on this disc.  If the missing files are still missing.  I had not saved the files yet since they were really vacation photos and have no critical and since I was going to save them after that I spent in review on the workstation.  Some are still on the cards and could be retrieved.  But I formatted my main map at least a couple of times and I'm afraid that most would have been crushed and is more viable, even using the card recovery software.

  Before you begin importing today, I don't check the disk to make sure that all my files were there.  There is no error in windows at startup and I don't mind just to check in Explorer or open the 'new' catalog first.

  1. Could Lightroom have somehow deleted files and can they be retrieved?
  2. Assuming that it was a Windows / hard drive error, can anyone recommend a program attempt to recover files lost like that?  Given that the entire folders, sound also lack if the index of the obtained partially erased disc.  But maybe the files are still there.  Then there is a program to search for them?

  Note that the other files on this drive all seem to be good.  The only missing are import of today.

  It is drive X:, but the files are not there.
  portable version is 2015.6

  Desktop version is 2015.5

  The

  Somehow, the windows removed them.  I use EaseUS data recovery to retrieve them.  He had no problem finding the files.  So I guess we can mark this resolved.

  Thank you.

• Could not import the catalog of items

  Good evening

  I just installed LR CC 2015.  I am trying to import my PS 12 elements catalog.  After the installation of LR, he asked if I wanted to import my catalog of items.

  I answer OK.

  It completes step 1 but very quickly the steps 2 and 3 flash by and the process fails with an error message "Cannot import catalog items due to an unknown error."

  I went to the elements and ran a repair of the catalog.  No problems were found, but I ran the repair anyway.  (I have only a catalog with photos about 7200 in it.)  Try the import again.  Same result.

  My computer is an iMac mid-2013 with 8 GB of RAM.  The OS is 10.11.4.

  Thanks in advance for your help.

  Rico

  The problem has been resolved.  I made changes to my catalog of PES 12, one that could have been useful.

  • deleted the catalog items that does not generate stamps for unknown reasons.  Those with a "broken" thumbnail  There were few of them.
  • Deleted the catalog items that were orphans - were found no associated file on the hard drive.  There were about 10 of them.
  • Deleted about 10 sound files from the catalog.  Not sure how they got there in the first place.
  • Updated the Visual index.  (less probably helped)
  • Ran optimize catalog
  • Ran repair (for the second time) catalog, even if the dialog box indicated that it was not necessary.

• Error in updating the catalog after upgrade to OME 2.0

  Successfully upgraded OME 1.3-> 2.0.

  Refreshed all ranges with success.

  Update the catalog reported following error:

  Import failed Dell Version order catalog for update of the system of ftp://ftp.dell.com/catalog/catalog.cab . Exception message: error: 2627, procedure: usp_PackageApplicable_Comparison_PerDevice, Message: Violation of constraint PRIMARY KEY 'PK_ApplicablePackage '. Cannot insert duplicate in the "Catalog.ApplicablePackage" object key The duplicate key value is (-1109705571, 25, 3550833e-3dbb-f9d6-7162-0c79c477241d, 00460041-0038-0044-4600-330039003700).

  However, it seems he's been through, because now he says that this catalog version is newer.

  This can be ignored?

  Thanks for the question.

  I'll check around to see if it has been seen.  But looks like when you view the version of catalog and the date in the console of OME, it is showing the most up-to-date?

  In the past, when people have lance in something similar they will use SQL Management Studio to smash the old catalog and download the latest version.  The command is:

  DELETE FROM OMEssentials.Catalog.Manifest;

  But if you are not comfortable with playing with the database, you may consider a support ticket to let them take a look.

  The logic of upgrade is supposed to run this command before the new catalog is downloaded.

  Kind regards

  Rob

• Error code 646 when installing the automatic/important updates for Windows Vista (with Service Pack 2)

  Recently, I received 646 error code when you try to install the important/automatic updates to Windows Vista. What patches are there for this issue? What risks are there to do not overcome this problem?

  rivercitylady,
  Usually with the code 646 error, if you download the update and install it manually that will fix the problem.
  Go to the Microsoft Download Center and search for the number of the update has failed.  Download on your PC, then run it from there. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fix it fails Center with the error: unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed

  Original title: Fix it center fails.

  Difficulty Center fails with the error:
  Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed
  I can't find the url of re - download.
  It doesn't seem to be at the Download Center.
  Thank you
  Frank C

  Vista Ultimate 64 bit sp2

  

  CF. http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/scanning-engine-has-stopped-responding/e0f84bec-2555-4279-bfb7-aff691b8ba8d