The computers on the network: not configured and do not want

Similar Questions

• I have 3 computers in a network; two Vista and one running windows 7. The computer of windows 7 can be placed in the network map.

  Hi, I have 3 computers on the network; two Vista and one running windows 7.  The computer of windows 7 can be placed in the network map (and I seem to be unable to it remote desktop).  This could be the cause?  I tried everything in the help documentation.  My router is a linksys 610n.  Computers have no NVIDIA cards or controllers.  Here's a screenshot of what I see in the network adapter:

  Hello

  Excellent Sam Job Varkey information should contribute to solve in this case, however some is
  Added information that can help as appropriate:

  Share files and printers between Windows 7 and XP
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  Configuration network host connection windows 7, xp and vista
  http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  If any document available please send my email id

  Thank you & best regards

  Martine

  Hello

  Thanks for posting your query to the Microsoft forum.

  Please see the suggestions in the following threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/msgexe-netsend-anything-availible-on-Windows-7/e9743edc-AFA9-4942-b1c7-66baf443067b

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/net-send-in-command-prompt-does-not-work/00ce5137-dff7-49e5-8511-943e55b83bd7

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Received a warning to unidentified on the network computer. Under the status of the network looked up and saw a computer I don't know anything. What is - this and how?

  Original title: computer not identified on the network

  Received a warning to unidentified on the network computer. Under the status of the network looked up and saw a computer I know nothing on my network. What is - this and what that can do. ?

  Implement the security of your network... How to do depends on details. If your network is at home on a wifi router, and then implement WPA2, which will prevent unauthorized as well as encryption of your data access.  Follow these steps on the router itself (once again the details depend on your situation.)

  While I'd love to implement WPA2, WPA2 will not accept my network and I am limited to WPA.  My point is that if it is a wireless intrusion (we don't even know if it's wireless at this point), then the security settings on the router must first be discussed with the manufacturer ISP or router so that they are appropriate for devices and services and programs.

  It could also be a USB transmitter attached to the computer.  It might be the malicious program or a problem with the firewall or a real hack of the computer through the firewall or caused by malicious software (even if you use cables or wireless).  It could be the entire network (but the number of computers which implies) or only this one computer.  It could also be a system service using the network and not really another computer in itself (in office what he says and where - some may be difficult to recognize and interpreted as another computer).  There are many possibilities.  We do not know what the warning generation program or what he says.  More information is needed.  I would also like to work on it - and it can follow to her new home.

• Error when opening file reader pen "the driver or network connection that the shortcut 'Target.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network is available, and then try again. »

  Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."

  OS:-xp sp2

  pen drive :-transcend

  earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).

  BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.

  my folders have files .doc, some do' report.unfortunately not have a backup of these files.

  target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN

  In the location target properties are even 4 all records

  Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls

  What exactly is...

  I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.

  ESET that worms have been Win32/AutoRun.VB.UG.Worm.

  now, I ve you gave details d, should know the problem I ve.i believe.help me

  Thank you for your time, but I did nt get the solution everywhere so formatted, it

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• Options has dissappeared form my top bar (the classic theme configuration) and with it, spell checker and al.

  Options has dissappeared since my top bar (the classic theme configuration) and with it, spell checker and al., search help find nothing useful, as usual. Am I the only one wondering how to access functions to be included under Options?

  You have solved my problem, and I wanted to thank you again for your help and your patience.

• I had the deparquement cloud testversion and now I want to buy it in the monthly OBA for 59.99 euros. I have an Adobe ID, but when I want to pay the abo it says payment system is not available and it is also the telephone hotline adobe! I really need the

  I had the deparquement cloud testversion and now I want to buy it in the monthly OBA for 59.99 euros. I have an Adobe ID, but when I want to pay the abo it says payment system is not available and it is also the telephone hotline adobe! I really need the software of any emergency! No idea why I can't pay online? That's what he says in tiny letters below: USER_STORE_COUNTRY_MISMATCH?

  Hi Frederic,.

  The country store & the Adobe ID, payment details must be same.

  For tax reasons, it is not possible to change the country associated with an existing Adobe ID. To work around the problem, you can create a new Adobe ID to the e-mail address associated with your existing Adobe ID see the link for instructions:

  Change the country associated with your Adobe ID

  Guinot

• Connection to the network with Vista and Windows 7 computers

  A similar question was answered before, but it's XP computers I use Vista and Windows 7.

  I have a Windows 7 computer that is part of a home network and who also has a connected printer. I want to access the printer from a Vista computer that is also on the network. When I try to connect to the Windows 7 computer, I get the error "logon failure: the user has not granted the type of logon required on this computer."

  I've seen solutions have been when the system tries to access the printer was an XP system. Can someone help me with this problem?

  Thank you

  Jim

  Hi Jim,.

  ·         Is file sharing enabled?

  ·         You have disabled password protection?

  Try to check the Advanced sharing settings in the network and sharing Center. To do this, follow these steps.

  a. click Start, Control Panel and then click network and sharing Center.

  b. now, click change advanced settings for sharing.

  c. now make sure that file and printer sharing is activated on and protected by password sharing is turned off.

  You can also see the article for more information:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Let us know the results.

• Home computer connected to the network request username and pass on only one of the three computers.

  I got my wife connected to my home network running Windows Media Center on Windows 7 laptop and it could be accessed by all computers on my home network. I replaced the laptop of the woman with a new laptop which has Windows 7. During the installation of Windows 7, it automatically set to join my home network. Now all but one of my other computers can access files/folders on the new laptop without a user name or password. But when I try to access the new laptop from pc it ask me a username and password. I never put in place of user names with password on all computers. I can go in the new laptop and send files and public folders from the pc of one of the problems, but not the reverse. Someone has an idea how I can fix this where it is not regarding the username and password on this computer?

  Hello

  Sorry for the late reply.

   

  Method 1
  I suggest you to follow the suggestion of Gloria replied on June 16, 2009 and check if it helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Networking/cannot-turn-off-or-disable-password-protected/a3e4f6cb-FBDF-4F15-bb93-38cbf6fac833

   

  Method 2
  You can read the article.
  Identify and resolve home network problems
  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

   

  Method 3
  Temporary disabling of security software.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

   

  See also:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you.

• A bet with the network team - configure the VLANs on Teddy does not work against Cisco?

  Hello

  We have a great place of Esx and I have a bet with one of the network Admins.

  I configured a vSwitch to work with 1 bear. On this vSwitch I configured 1 vlan with a Vlan ID 100

  I told the guy from the network to set up the bear side here and he said he has set up 'Access' and not trunk as normally I ask because it's only 1 Vlan.

  I said ok and we tried and nothing works, when I configured the Vlan 0 in the Esx, it started working.

  Of course we cannot leave it like that and need to Config the Vlan on the Esx.

  I told them that once I configured the Vlan on my side there is nothing to do there, and they need to do the thing here.

  they say the same thing.

  Who is right? It is something they need to configure side here if she's 'access' and not 'trunk '?

  or is it something at my side?

  This mayble help your network http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004074 management team

  and

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003806

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• The my wireless is not functional (HP slimline win xp media). The sign (!) is next to the network controller icons and the Realtek drivers. Please advise me steps to solve these problems.

  In the Device Manager settings, how to fix the sign (!) beside the network controller and the Realtek drivers for the card to operate wireless? in win xp for HP slimline free?

  Please indicate where to get a free package of download and installation, if necessary, with the right drivers and you please see a "how to install" because I can't possibly struggle with this more.  NO COMPUTER = GRUMPY ME.

  Thank you kindly,

  Amber

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• Extend the network 1 Extreme and 1 Express

  I have the latest Airport Extreme, and I would like to extend my network to the floor with best performance.  I have the ability to connect to an Airport Express Terminal via an Ethernet cable.  My question is this... If I set up a roaming network using the Express connected via a Cat5 cable or Cat6 will be broadcasting from the Express (capable of) wireless A/B/G/N/AC channels?  Or he can do A/B/G/N?  Assuming that I bought the last Airport Express Terminal.  Or, if I wanted to AC that I have to use a second Airport Extreme?

  The Airport Express is not capable, "ac", so if you want to use "ac" of speed signals more high, you'll need another AirPort Extreme.

  In both cases, you can use Configuration Apple 'Wizard' to automatically configure the AirPort Express or Airport Extreme for a network roaming... than Apple installation called 'Spread with Ethernet' in their installation utility.

• OfficeJet 4630: My old 13 OfficeJet 4630 months fell from the network this summer and I can't put it back on

  Printers and copiers have always been the bane of my existence!  Last summer, I replaced my old Epson with a new 4630 OfficeJet to gives me a few years peace.  Peace lasted for about 9 months, and then he fell just the network.  I made a few weak attempts to put on, and then abandoned.  Now, the school is in session and grandchildren want to use the printer.  I therefore once more, Tech-granny trying to fix another printer who hates me.  I started by turning off the printer and it turn.  I whipped on the menu of the printer until I found wireless, then selected the wireless configuration wizard.  He discovered my network but not remember the password.  I lightened it with the password and she confirmed that it was connected.  Imagine my joy!  I run a wireless network test, then print a network configuration page.  After removing all printers from my Mac earlier, I now tried to add the OfficeJet.  My beloved Mac has argued that it saw no printer, that he did not even a hint of a printer. Being a martial art Granny and I was near the end of the roll, I decided to jam printer said throat of the Mac by entering the IP address of the printer directly from the configuration page.  My sweet Mac have searched and searched - and then communicated to me that "device is inaccessible.  Well, shit!  Strength of the network is 4, it sounds good.  Is this good?  I have to move the printer closer to the router?  For now, the victories of network and I lost.  I hate losing.  Why the hell a printer works perfectly fell on the net in the first place?  Grandma needs wine!

  I called Apple. We have reinstalled the operating system and everything works.