The configuration of the coast DMVPN speaks with higher bandwidth for traffic shaping
Dear all,
We have the unusual situation that on our sites talking DMVPN has a higher bandwidth (33 Mbps) that our
DMVPN Hub Site.
Therefore, we must apply to 10 Mbps on the interface of tunnel on the radius of traffic shaping.
The following link describes only how to make an application in the form at the end of the hub, but not on the site of end spoke:
How to proceed with this on the router spoke?
Creating a service policy and applying then to the tunnel interface will do the job? Put in shape will be before or after encrypting the traffic?
And then we would need to increase the buffer size of 1024 to something more replay window?
The following example would work? We would apply the outbound policy to the Tunnel interface:
class-map match-any CLASS_ANY
match any
policy-map POLICY_SHAPE10MEG
class CLASS_ANY
shape average 10000000
interface Tunnel 0
service-policy output POLICY_SHAPE10MEG
Thanks for your help,
Thorsten
I see on the hub strategy is applied successfully on the tunnel. The political POL_SHAPE10MEG is applied on the tunnel you wanted, this way the rays won't be able to consume even if the bandwidth of the hub it has higher bandwidth.
Tags: Cisco Security
Similar Questions
-
I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect page should I create a separate provision of the page for each device or just a provision of office that fits all three screen sizes? I hope that if the html page has the same name of the device (query) is automatically detected. Help with the help of Adobe Muse CC
By Payal integration, you mean paypal html button? or etc payment gateway configuration? If this is a configuration of the gateway to your site domain name then a single page with any structure will work, but if you use the button code for all associated formats then you will need to create separate pages for all.
Thank you
Sanjit
-
Hello
Please forgive me if this has been discussed in this forum already. If so, please point me to this discussion.
What I'm trying to do, it's a data merge InDesign with a (CSV) file delimited by commas. I created the CSV file by using the command "SaveAs CSV" with Office Excel 2013. The problem I have is with records that contain multiple lines in the same area. After reviewing the merged InDesign document, I noticed that the results are inaccurate for the rest of this record. When it gets to the record following some fields are filled with the remaining records of the previous record.
I'm sorry if I'm not explaining this very well, but the results are strange and I hope others have similar results and can offer a solution.
Thank you
Greg
You can't have line breaks in a cell. The solution is to use a code for the break, and then run find/replace after the merger to change the code to break you.
-
How can I get PremierePro CS6 to speak with Blackmagic card for an HDMI output?
I recently upgraded my CS5 MacPro to CS6. I mainly work with Premiere Pro, but also with PhotoShop and its stand. Previously, my HDMI monitor worked with CS5, but CS6 playback settings had Adobe Player by default as an option and it would not show the Blackmagic card optional. I have improved my Blackmagic Software to the latest version (9.7), but that no longer works. After the upgrade of the Blackmagic HDMI signal in the version PremierePro CS5 (still installed and running) has stopped working. Subsequently, the MacOS has been also improved 10.7.5 to 10.8.3 but no change in the result. I checked all the mechanical linkages.
My features of the platform are:
MacPro (early 2009)
10.8.3 OS
Processor: 2x2.66 GHz Quad-core Intel Xeon
Memory: 12 BG, DDR3 1066 MHz
Dual screen Apple display
Blackmagic (9.7) output settings: all videos, Audio analogue 4 & 2AES/EBU (NTSC)
My question is how do PremierePro to speak with the map Blackmagic?
Phil
Hi Phil,
Blackmagic what card have you?
There is a known bug with intensity cards and Blackmagic 9.7 driver where it does not export the HD, only SD this should be resolved soon.
In the meantime, if you have a map of intensity you can go back to the desktop version 9.6.8.
Best,
Peter Garaway
Adobe
Premiere Pro
-
Remove the secondary controller and tertiary high availability for each access point
I want to remove secondary and tertiary sector controller of high availability for each access point. I have more than 900 APs associated with a Version of the WLC 8510 8.0.121.0 software. What is the best/better way to remove secondary and tertiary controller?
Or I can create a model first. We use version 2.2Hello
Easiest way:
Yes you can do this by using the first Cisco Infrastructure, you can create a Setup AP Lightweight model to specify the name of the PDC and the IP address and specify an empty value (choose the first empty option in the drop-down list) and 0.0.0.0 for the secondary and tertiary sector controllers. Then you can apply this model to the AP, and she must remove (virgins all) values for these fields.
Long way:
Yes there is no clean way to remove it from the CLI. you need to manually remove each on the AP.
Concerning
Remember messages useful rates
-
We are the USA, but visit the France my MacAir and Macbook Pro husband. Both use the 2 MagSafe power adapter. So, I bought a power MagSafe 2 with French plugs adapter. Can we mix and match, while in France, using (1) the French MagSafe 2 adapter plug directly into the more (2) the French cord with adapter USA. In addition, we were worried we needed the voltage conversion of 240 to 110 while in France but the other, the old messages suggest that we could simply use an adaptor plug French with the USA MagSafe 2 even power adapter. Is this true?
You don't need a power converter. The Chargers can use 110-240 volts. Read the fine print on the charger (you will need a magnifying glass if your eyes are as bad as mine). The only part you need is the area plug the adapter to fit the wall socket.
-
Write to the file of measurement with a loop For using the value of the dynamic data attributes
I looked and looked, but couldn't find a solution for this.
I currently have 15 points of different data that I try to write in an Excel file. I have all combined in a table and lie with the function "write into a file position. However, the column names are always "Untitled", "Untitled 1" etc. I then used the function 'Set the Dynamic Data attributes'; but for this I have to do 15 different functions "set data dynamic attributes. It was suggested to use a loop with the function 'Set the Dynamic Data attributes' inside of her, but I can't find how do.
I have several arrays consisting of 15 different values for 'Signal Index' 'Name of Signal' and 'Unit', but also a unique 'get Date/Time In Seconds' related to 'Timestamp '. The problem is that the error I get when I try to connect the output with Scripture at the entrance to measure file:
The source type is dynamic data table 1 d. The type of sink is Dynamic Data.
How can I fix it? I have attached a picture of my installation; Sorry if this is gross (I'm new on this!). Thank you!
It will get rid of the error, but it is not quite correct. What you need to do after that is to click on the output or the tunnel entry and select 'replace with the shift register. In addition, the array of values that you have wired to the Signal Index is wrong. Arrays are 0 based. Just wire the iteration Terminal here. And, finally, take the size of the table and this connection to the N terminal are stupid. Don't wire nothing to this.
-
Problem with the Logitech Wireless Speaker Adapter
Hello
It's been days trying to get my computer, a Dell Inspiron 1721 on Vista, working with the Logitech Wireless Speaker Adapter. There are no instructions to come with the adapter because it was said to be very easy to use, that well is not for me...
The adapter works via Bluetooth. I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off. The adapter works as I have tried with a smartphone and it was so easy to do.
Apparently something to do with A2DP, which does not have Vista. (I'm not an expert, I just repeat what I read on the forums...). If Yes, where can I find?
Any help is welcome because I am completely lost on this one.
Thanks adavance
chikito11nThere is no instructions to come with the adapterYou can find the instructions on the Logitech support page. On the left side of this page is a link to the Getting Started Guide pdf which is the instructions.
chikito11nI can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off.The flashing green light means it tries to connect and pair, so it can not connect, or it can be connected, but not being able to pair.
First of all, make sure your laptop is equipped with a bluetooth adapter.
Then, make sure you have the latest bluetooth driver. Go to the Inspiron 1721 downloads page. In the drop-down list, select Vista. Expand the network category. Find your bluetooth adapter driver and install it if it is newer than your current driver. (These drivers are from 2007, then you probably already have the most recent).
As the Getting Started Guide Logitech says "refer to the documentation that came with your device for pairing instructions. Dell does not provide these instructions, but they are available on the Microsoft website. However, page this guy has the instructions and screenshots and it is easier to follow than Microsoft. It also explains how to determine whether or not you have a bluetooth adapter and how to configure it to connect to a bluetooth device, then explains how pair or sync in Vista.
Note that if you enter an access code in the Bluetooth Setup Wizard, the Getting Started Guide says to enter 0000.
-
With the help of site with iscsi
You will need to validate whether you site for a config where vmotion and iscsi share the same vmnic.
MY idea is to set up a single vDS with 2 vmk for iscsi connections, 1 with vmnic2 active and vmnic3 not used, the other vmk would be configured inversely with active vmnic3 and vmnic2 as unused.
Now now for vmotion I would create a configuration multi-NIC where vmnic2 is active and vmnic 3 is not used and once again the 2nd vmk vmotion would be configured conversely where vmnic3 is active and vmnic2 is not used.
VMotion networks would be configured w lower priority than iscsi networks to allow storage traffic
Concerns:
in iscsi multi pathing others vmnic in the vDS other than the active vmnic must be unused when the use binding, it is also the case for several microphones vmotion or is having other vmnic in the ok mode standby? Which is the preferred method?
the above configuration is officially suppotted?
site slow performance of iscsi network will somehow?
Thanks in advance
in iscsi multi pathing others vmnic in the vDS other than the active vmnic must be unused when the use binding, it is also the case for several microphones vmotion or is having other vmnic in the ok mode standby? Which is the preferred method?
Unlike iSCSI use cases for Multi-NIC vMotion inactive NICS must be configured as standby and not as unused.
See VMware KB: Multiple-NIC in vSphere vMotion 5
the above configuration is officially suppotted?
Yes.
site slow performance of iscsi network will somehow?
It obviously depends on how to actually configure NIOC and how the consumption of bandwidth real iSCSI and available bandwidth. Usually you would not define the limits of the NIOC on iSCSI traffic bandwidth and assign a higher priority as well.
You can also consider to use the traffic on the port vMotion group shaping, see the following articles:
Test vSphere NIOC host limits on Multi-NIC vMotion traffic | Network of Wahl
Based on the Multi-NIC vMotion bandwidth control traffic shaping | Network of Wahl
-
Can I use 63-bit Win 7 Home base with the same product key that I used for 32 - bit?
1 I have win7 64 bit with licesence version hombasic. And now I use homebasic 32bits and 64bits format and install with the same key... So I jst want to know that this process can damage my computer laptop operating system? or there is no problem whatever I did!.
Original title: Win7
Well, it will damage her, just that you will not run the 64-bit version, which means, if you have more than 4 GB of RAM installed, Windows 7 Home Basic 32 bit will not support it.
You should also check that the manufacturer of your computer is using 32-bit drivers for your computer.
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
This is how the recovery partition is accessible to most popular brands...
For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.
For HP, press F11 directly after switching on the device
For LG, press F11 directly after switching on the device
For Toshiba, press and hold "0" BEFORE and during the power upward
For Acer, press and hold ALT + F10, as soon as you see the logo
For Asus, press F9, as soon as you see the Asus logo.
For Samsung, press F4 to the power upward...
For Fujitsu, press the F8 key directly after the power
Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"
Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".
-
Where are the guidelines on how to interface custom for LabVIEW data acquisition equipment?
I have a need to do some very specialized data acquisition that may require special hardware for the building. I would still use LabVIEW as the front end and maybe even wear parts of the interface of the final product. However, I can't find the documentation. Where is that is kept? I've seen references to a number of generic protocols, no links back to the details, which may be appropriate. The data are a band high bandwidth, but bursty with sampling frequency up to 40 MHz and events that lasts about 100 milliseconds. Can anyone recommend various methods would be most suitable for this application?
You can use the instrument driver model and guidelines.
http://www.NI.com/white-paper/3271/en/
Use google to search not for OR
I searched
national instruments instrument driver guidelines
-
I copied these SAME lines of account 2 browsers
Internet Explorer DISPLAY OF THIS TRANSACTION
Practice accountBSB 112-879 Acc 028 725 xxx $179.41 Available balance: $179.41
VIEW OF FIREFOX
Practice accountBSB 112-879 Acc 028 725 xxx AUD172 Available balance: AUD172
If you get the PDF Viewer with a notification bar at the top then you will need to either use the Adobe Reader software with a plugin for Firefox or another plugin that can handle PDF files or open the file in an external PDF Viewer.
The current versions of Firefox have allowed a new build-in PDF Viewer that has all of the features that other readers PDF as Adobe Reader.
You can change the action for Portable Document Format (PDF) to Preview in Firefox to use Adobe Reader software or set always ask in "Firefox > Options > Applications".
- Tools > Options > Applications: Portable Document Format: Adobe Reader (in Firefox) or always ask
- http://KB.mozillazine.org/File_types_and_download_actions
You can set the pref pdfjs.disabled true on the topic: config page to disable the build-in the PDF Viewer.
See also:
-
slow queries with high_value inappropriate for partition interval
Hello
yesterday, I defined a partitioned table with a single initial partition interval. The partition key was an id of value with a (generated sequence) run around, the interval was 1 - and since I didn't know the value of the id, I put the high value of initial partition 1. Then I inserted a few lines, started a query simple - and waited a long time for the result. 10046 trace showed, that the query was using a lot of cpu - but I had no idea what he was doing.
Today, I created a simple test case (in 11.1.0.7 on a Centos 5-server; but I got similar results on my Windows 11.2.0.1 database):
When I choose a high_value > 100000 grouping query runs < 1 sec.-- test_interval.sql set verify off undefine high_value drop table test_interval_p1_&&high_value; create table test_interval_p1_&high_value partition by range (id) interval (1) (partition test_p1 values less than (&high_value)) as select 100000 id , t.* from all_objects t where 1 = 0; insert into test_interval_p1_&high_value select 100000 id , t.* from all_objects t; commit; -- pause select id, count(*) from test_interval_p1_&high_value group by id;
With high_value = 100000: 1 < s
With high_value = 90000: 1 sec
With high_value = 80000: 3 sec
With high_value = 70000: 9 dry
With high_value = 60000: 17 dry
With high_value = 50000: 28 dry
With high_value = 40000: 34 dry
With high_value = 30000: 47 dry
With high_value = s 20000: 61
With high_value = 10000: 76 s
With high_value = s 1: 102
When I take pictures of the v$ sesstat before and after execution of the statement, I see that the slow queries show signifikant higher values for "CPU used when calling has begun", "CPU used by this session,"DB time","uga session in memory","pga session in memory.
But I have still no idea what the query does with all CPUS (maybe browse the possible - but non-existent partitions? "(Mais cela semble un peu ridicule)." In documentation (http://download.oracle.com/docs/cd/E11882_01/server.112/e16541/part_admin001.htm#VLDBG1088), I couldn't find any explanation (and I have no MOS access at the moment).
Can someone explain to me what is happening here?
Thanks and greetings
Martin
Edited by: mpreiss may 25, 2011 20:05
Edited by: mpreiss may 25, 2011 20:45>
>
But I have still no idea what the query does with all CPUS (maybe browse the possible - but non-existent partitions? "(Mais cela semble un peu ridicule)." In documentation (http://download.oracle.com/docs/cd/E11882_01/server.112/e16541/part_admin001.htm#VLDBG1088), I couldn't find any explanation (and I have no MOS access at the moment).
Can someone explain to me what is happening here?
It looks like a bug - call him in to Oracle with a SR.
I repeated your test but only to insert a row into the table, and it took 15 seconds to run the query on my laptop when I put & high_value 25000.
Check the activity of rowcache $ v - this is where the CPU is going. You will see '100 000 - high_value' Gets the dc_tablespaces and dc_users rank of the cache entries when you run the query (and it's two hits on rowcache latch latch for each get).
Concerning
Jonathan Lewis -
Satellite A300 - no sound, the "speaker" with a red icon
Hey there!
So, I got this Toshiba sat idle until I decided to restore it to factory settings and start using it again. I remember exactly if I didn't sound the last time I started before restoring it, but now, after three reinstalls I've still no sound, all I have is the speaker with a red x icon.
This laptop is using Windows Vista 32 bit, I had no problem during the restore, everything has been properly installed except audio drivers. I'm sure I should have something in the sense of "Realtek High Definition Audio Driver" or something on the Manager devices, but all I have is "ATI HDMI Audio" and three devices not recognized and the only thing that appear on the output devices is "Realtek HDMI Output/ATI HDMI Audio" and say that it is not. Already tried to reinstall the Toshiba drivers, Realtek, even went as far as to try to force Windows to install the correct driver, but it ended in a BSOD.
Then... I'm really at a loss. I really want to restore the sound, and I refuse to believe that there is no solution. The device is detected every time even though she has not recognized... Then... Am I missing something?
Help, please. =(
>... until I decided to restore it to factory settings
Original recovery image contains all the necessary drivers for all hardware components, so its driver must be installed correctly.
Can you please open the Device Manager and check the status of the sound card it.
Please post comments. -
Bug with high speaker on the Satellite C650-144 with Window 7
I have a bug with my high speaker, so I download driver leatest and nothing has changed.
But when I use the jack slot it works and when I put it and when I go to the speaker icon in the windows taskbar there is 'activity' because the level moves, but there is no probe on my high speakers.For windows everythings works fine, so I don't know what I have to do...
I went on the Internet on the forum, but there is no solution for my problem!Please help me!
My computer references are: Satellite C650-144 and PSC08E-01100DFR
Please excuse me for my English...Thank you very much!
Friendly
aldebordeauxHello
Simply said; You can listen to the sound using headphones, but can not hear the sound on the speakers. Right?
Have you noticed this early? Have you installed a few 3rd party applications may affect the functionality of speaker? Maybe some Windows updates can affect this?
Please check the settings in the control panel-> sound-> the Read tab
As a last resort, I recommend for recovering the device I want to say, it looks a bit because of speaker, but I strongly recommend to test the laptop with the factory settings.
Maybe you are looking for
-
bought iphone7 pluse Qatar facetime doesn't work for the sim card of the India
Hello Sir, I bought iphone7 pluse in qatar that the facetime doesn't work for the sim card of the India. and also before 2 years I bought the iphone 6, as well as in the same countries qatar, but that works perfectly and facetime works for me. the di
-
Apple Watch will not update to watch OS 3
Hello I wonder if anyone can help me? I updated my phone to iOS 10.0.1 and when I try to update my watch, I just get the message watch OS 2.2.2 your software is up-to-date. I have no profile installed on my phone (for example Apple Beta etc.) and I r
-
Strange symbol/icon in the list of music on iTunes app
Hello! Recently, I moved my iTunes library to a new computer. When I started iTunes on my new PC, I could see all my music files and playlists. So far so good. I also (intentionally) all deleted music and playlists on my device (iPhone 6) because I
-
Drivers for Pavilion 15-b054st for Win7
Hello I know know that HP does not have drivers for win7 for Pavilion 15-b054st (win8 was preinstalled on it), but in any case, I'm looking for drivers for Win7... I have already installed everything except a Unkownd USB device. Windows cannot find t
-
ADF on HP Offijet 6500 from cleaning more
How can I get the ADF open so I can clean the feeder and a scanner? It captures the lines when I scan documents.