The configuration in the registry information is incomplete or damaged (Code 19)

Similar Questions

• the configuration in the registry information is incomplete or damaged (code 19), all Audio devices!

  After restarting my laptop today, I noticed that his or my microphone wasn't working. Shortly after, went to check my reading and recording settings to see that all of the devices that were once there were not show. It wasn't a matter of display disabled devices, literally all my recording and playback devices are missing! Later, I opened the Device Manager and came across this, which shows an error code of 19. I don't know where to turn to here, please help!

  The problem image is placed underneath.

  

  Please note that I already tried unistalling the drives, restart my laptop computer and scanned for hardware changes in Device Manager, and it happened.

  

  Maybe, but I entered the chance. I just tried to reintstall the drivers again after the fifth time, and this time he has no error. Thanks for your help though!

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

  Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

  The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
  Could someone help me?
  -The pilot is the last in line.
  -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
  -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
  -My OS is Windows 7.
  -A restore factory settings did not work at all.
  Thank you.
  Claudio Nahmad
  Mexico City

  Hi, Claudio Nahmad,.

  This error can occur if the data in the registry for the device and its driver has been corrupted.

  Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  You can also try to install Windows updates, including optional updates driver and check if that helps.

  Install Windows updates in Windows 7

  Hope the helps of information.

• peripheral hardware configuration information cd/dvd player cannot start Windows (in the registry is incomplete) or damaged code 19

  Windows cannot start the cd/dvd drive because the configuration in the registry information is incomplete or damaged

  error code 19

  Have you read that the next page & run fix it tool:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Please tell us the final result of the correction tool. S.Chatterjee

• Cannot start this hardware device because its information for configuration (in the registry) is incomplete or damaged (code 19) HELP Please!

  Hello, I did all THE steps mentioned above, and I still can't get it to work. I tried to uninstall the driver and then reinstalled, tried the Mr. Fix it - will work with windows 7, it says. I tried to restart my computer. The message I get is;
  Problem with your CD/DVD-Rom drive
  Cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19)
  I don't know what else to do, can anyone please give me instructions step by step what I need to do please and thank YOU!

  Hello

  1. Have you recently installed the CD/DVD drive?
  2. Are you aware of any changes made to your computer before this problem?

  A Code 19 error is caused by one or several problems with parts of the Windows registry that contains the driver and other information on the specific hardware device.

  Check the status of the device should be the first line of conduct, if you suspect that a particular device that is causing a problem, or if the device in Device Manager is marked with a yellow exclamation point.  It is also possible that the device is not compatible with this version of Windows.

  Below the thread responds to the question. I suggest you follow the instructions in the thread to solve the problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/code-19-configuration-information-in-the-registy/80fa904a-7ceb-4533-A8A7-6a91040e283a

  Note:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  How to back up and restore the registry in Windows

  It will be useful.

• the registry information is missing or incorrect. Please reinstall the product__

  Number of reme- this is a public forum so never post private e-mail or telephone information, I used Adobe Framemaker 8.x professional family Vista for a few years. In a few months, when I try to open the program I get the message "the registry information is missing or incorrect. Please reinstall the product. »

  I bought this one product update (a former Mac program) and for download. Download disk only allows me to remove, repair, or modify the program. Adobe says they cannot provide me with a complete program disk because mine was a backup - but I never had a Windows program, that Mac but that's another story.

  I use the drive to "fix","the program and then it starts but if I close the program, I have to start the same thing. I am not comfortable with editing the registry and wonder if there is a way I can download something or can allow someone to fix it remotely for me.

  Hi Kirksvillian,

  Given that corruption in the registry, you may need to uninstall Adobe Frame maker using utility windows cleanup, and then reinstall the application to resolve the problem. Since the question is several months system restore may not be an option.

  http://support.Microsoft.com/kb/290301

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Code error 19, configuration information is incomplete or damaged. DVD player does not work.

  Original title: DVD does not! Configuration information is incomplete or damaged.

  My problem is that my DVD seems to have stopped working! I get an error message stating "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19) '-what does that mean? I can solve this problem?

  Any help is very appreciated!

  When you go to save the information (file > save as) give a name to the file and save it with the .reg extension.

  Example:

  File > save as > and then type dvdfix.reg in the box "save under" > OK

  You said that you have not seen the UpperFilters and LowerFilters values if the registry fix may not work unless you can not reflected on the key named in the article.

• "Incomplete or damaged. (code 19) "Vostro 1710 optical Slot Drive questions

  Help!

  I have a Dell Vostro 1710, running Vista (business ed), the questions that I have are:

  • Drive optical slot is not appear at all in the section "my computer."
  • Cannot insert a disk (but I do not remember there be actually any media in the drive, but it makes a noise as if indeed there);
  • Cannot insert a disc.

  I tried uninstalling the drive and reinstalling, but it will not be displayed in the 'My Computer' box is still visible in the Bios. When I reinstall the driver, he says that I am not an administrator and cannot do but the thing is that I am the only user there account and he said: I am the administrator...

  Suggestions that am at a loss and was on the Dell online support chat and well they suggested little about what I tried but I don't have the "incomplete or damaged. (code 19) "message til later.

  Please help someone!

  
  

• mouse works does not, his hang.its showing me the error like this. "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).

  I recently installed a graphics card for GTA 4, his work properly.bt yesterday my screen crashed it mean clear.when I started in safe mode then it is appeared correct.afterwords all of a sudden my mouse kick & stopped then I uninstalled graphic card.cause of this my connection net failed.plz help me & give me good solution.i have window xp.

  Hi DineshKaria,
  
  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey.
   
  Follow the suggestion in the article given below for code 19 and check if the problem is resolved.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
  Additional reference on:
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

• My DVD does not work: the device can not start because the configuration of the registry is not complete or damaged. (Code 19)

  I ran 'FixIT' - could not resolve the problem.

  Followed the manual guid, but ' ' LowerFilters was not present in my registry and then the guide had no more suggestions.

  Y at - there anyone out there who could help?

  Hello

  Step 1:

  You can try to uninstall the CD/DVD software of engraving. Check out the following link.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Once you uninstall the software, restart the computer.

  Step 2:

  Try to uninstall the CD/DVD drive on Device Manager. Check out the following link.

  Uninstall or reinstall a device

  http://TechNet.Microsoft.com/en-us/library/cc725782.aspx

  Once you uninstall the device, restart the computer.

  Step 3:

  Check the status of the CD/DVD drive in Device Manager.

  See the following link for more information.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

• DVD/CD Rom error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title: CD-ROM/DVD-Rom problems

  My CD-ROM/DVD-Rom drive does not work when I check the system, I get the following message "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). "How to solve this problem?  Thank you in advance.

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  My DVD/RW drive stopped responding on my Acer Aspire laptop computer 4510Z I checked the Device Manager which is gives the following error message:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I solve this error so far achieved the following without success:

  -Checked for solutions using the button below the error message
  -Scanned for hardware changes
  -Used Microsoft Automated Troubleshooting Service (SMAT)
  -Created the cdfix.reg file, it has added to the registry and restarted the computer

  I would be so gratefull for any help anyone can offer.

  Darylandgoats

  Hello

  I oddly found the solution to my problem while browsing through the suggestions of SpritX at the following link: http://forums.techarena.in/vista-help/771598.htm

  Here is the solution I implemented and now my drive works perfectly:

  RESOLUTION
  Warning serious problems might occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps: 1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  Be careful it can be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
  3. in the right pane, click UpperFilters, and then click on remove.
  4. click on Yes to confirm the deletion of the UpperFilters registry entry.
  5. in the right pane, click LowerFilters, and then click on remove.
  6. click on Yes to confirm the deletion of the LowerFilters registry entry.
  7. exit the registry editor and then restart the computer.
  Note When you delete the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

  For information about how to contact computer software vendors, click the number in the following list to view the article in the Microsoft Knowledge Base:
  65416 (http://support.microsoft.com/kb/65416/) hardware and software contact information, A - K

  60781 (http://support.microsoft.com/kb/60781/) hardware and software details, L.-P.

  60782 (http://support.microsoft.com/kb/60782/) hardware and software contact information, Q - Z

  Thank you!

• Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  My DVD RW drive, Optiarc AD7530B has stopped working. I get this error message in Device Manager:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Verification of the solution does not anywhere - thanks Microsoft!

  Anyone know if there is a resolution to this?  The car was working fine so it must be one of these "Windows Updates" which does its magic.

  Hello

  Check these for the good info on CD/DVD - maybe someone with the same unit can give you all the
  correct the registry settings to try. And the drive could be bad.

  CD/DVD units
  http://www.myce.com/storage/

  Forums - a lot of expert real help
  http://Club.myce.com/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.