The connection error

Similar Questions

• can't buy my photo book, due to the "connection error", even if the connection is working.

  When I click on the button "Buy book", it takes a while, and then he says that the connection does not work. However, my connection is working (I checked it) and all of the updates are installed.

  It is iPhoto?

  Apple is no longer sell printed of any nature to iPhoto or Aperture, since March 31. You can use a 3rd party printing service or make your article printed in the Photos.app which comes with OS X Yosemite and El Capitan.

• Problem in sending the request to the server, MDS started after expired connection error

  Hello

  I have a problem when sending request to the server. I need to manage the time of connection error. When I send a request from my device to serve and connection time-out error, I need to send the request back to the server.  To test this error, before sending the request, the MDS quit and then I try sends the request to the server. After 2 minutes, the appliance up Connection Timed out Error.

  Now when I start the MDS and refer the request to the server, the request sent when the connection has expired also reached the server. (Totally 2 request are sent to the server).

  What is the behaviouir of MDS? If so how should I handle this.

  or have I missed something on my side?

  I use BlackBerry 4.2.1 JDE with SDM (4.5.0)

  Thanks in advance.

  (Note: see this link for the behavior of MDS.)

  Hi all,

  I finally found the solution.

  Everytime I go to start the net, I check that the connection is available or not by using below codes...

  HttpConnection conn=null;try    {    conn = (HttpConnection) getConnection(myURL);      if(conn == null)     {           Inform the user the process is in offline       }     catch(Exception e)      {      }      finally      {                try                {                    conn.close();                    conn = null;                }                catch (Exception e)                {                    conn = null;                }            }
  

  When this function is execute the connection is not closed properly.

  After that I got the connection error, start the MDS, meanwhile runs unclosed connection.

  Now, I removed the check above, its works very well.

  I made a mistake. Finally, I saw that and correct it.

  Once again thanks for all your opinions and answer.

  Sorry for my English.

• Web Service with Laserjet 200 M251nw connection error

  I searched other messages here and tried everything.  I can't get the Web Service works with this printer.  It works fine connected locally.  It has a fixed local IP address.   I put the printer in the DMZ router.  I put the DNS settings to Google's servers.  I checked the firmware, and this is the last 20121026.

  Enable Web Services.  Then he comes back and says success is waiting for the briefing, but he never comes.  I go to the HP ePrint tab and I see it has an e-mail address assigned, but when I ask another information paper, the 'connection error' returns.  I sent by email to the address and nothing happens.

  I bought my son a chromebook for Christmas and I would like for him to be able to print to it.  Help!

  I finally got this working.   I ended up buying a new router, but I was ready to be upgraded in all cases.  It works very well with this new router (D-Link DIR - 860L).

  Before I had a router ASUS RT - N16 running DD - WRT, but I loaded the latest firmware ASUS when I couldn't get this to work.  It did not matter.  The router seems to hang after the registration of the printer with another firmware, so I decided it was the router as well as the HP support line.

  Now everything works such as documented.

• Connection error android application OR data dashboard

  I did a project and vi on it. I did a shared variable, and it has successfully deployed. I want to pass this variable through my router wireless app android (dashboard OR data). I'm unable to connect it as when he asks me the address of the server on my phone I plugged it to the address 44.0.1.5, but always a connection error message. My router IP is 192.168.1.2, and even still the connection error message. I disabled my firewall and still... in short I want to see the value on my android app. Check it out the images that I attached. How to connect to a shared variable made on my pc and see it on the phone?

  Hey defined

  Have you reviewed this article for the hardware and software firewall configurations?

  http://www.NI.com/white-paper/12402/en/

  Frank R.

• 'Connection error' video example RTMP, used to work, now no longer works?

  Hi all

  I had together developer FMS 3.5 installed on my server installed a month ago. I used to be able to go to the /webroot/ page to see the video RTMP sample show and it worked very well. Today, I'm going to view this page and find that he's not playing. I get "connection error. Please preee play to try again. »

  By pressing the play does nothing, so I click on the thumbnail RTMP and it recharges ony give me the same error again.

  I can click on the thumbnail HTTP and see the video plays very well. But I want RTMP and after more than an hour on the phone with my tech managed hosting, we can't find anything wrong.

  Here's the thing: I didn't do anything, I have not changed anything, I haven't handled the server software either. It has just stopped working and gives me "connection error".

  I checked that the 1935 port was open, and it is.

  UPDATE:

  When I click on the thumbnail RTMP, once the "Connection error" message appears in the reader, the following things occur in my server logs:

  "File does not exist: / folder/folder/folder/fcs.

  "File does not exist: / folder/folder/folder/open.

  The period of INVESTIGATION, it is my own.

  The/file/directory/folder/corresponds to my public_http file and related files for the site, NOT the RTMP server structure. I have no idea why the F
  MS seeks in my fcs public_http and open, but it is.

  Thoughts?

  Help, please? Thanks in advance!

  Sincerely,

  wordman

  Have you checked whether your FMS is running and what newspapers don't that you see these errors - core or edge or master?

• Update the Adobe Flash plugin always translates into a connection error

  Firefox quote plugin Adobe Flash as being outdated (has happened several times previously); the latest version of the plugin is downloaded (as done successfully many times before). This time, a connection error occurs. Repeat the process several times over several days gives the same results.

  More in detail, the smallest prior download EXE which is first downloaded from the Adobe site is able to be downloaded, but by operating it said something like "Download will begin shortly," with the download of the application itself never occurring, and a later message connection error.

  Although there seems to be a problem with Adobe, I suppose that other Firefox users would have also encountered this problem and he may know a solution.

  Better to use the full installer offline from here:
  https://www.Adobe.com/products/flashplayer/distribution3.html

• How to resolve the error "the connection was reset"?

  I tried to load facebook.com and there is error, it is

  The connection was reset

  The connection to the server was reset while the page is loading.

     The site could be temporarily unavailable or too busy. Try again in a few moments.
     If you are unable to load any pages, check your computer's network connection.
     If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
  

  no idea how to solve this problem?

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• I get a 'Secure connection' error failed with google stating "certificate contains the same serial number.

  When I click on a link to a google search, I get the "Secure connection" error failed in Firefox. He says, "please contact the administrator of the server or email correspondent and give them the following information: your certificate contains the same serial number for another certificate issued by the certification authority."

  I followed the instructions here:
  https://support.Mozilla.org/en-us/KB/certificate%20contains%20The%20Same%20serial%20number%20As%20another%20certificate
  and looked at this article:
  https://support.Mozilla.org/en-us/questions/1028103?ESAB=a & As = AAQ

  I uninstalled and reinstalled Firefox, deleted the entire folder profiles and reset Firefox. I see that the older (orphans) article points to my router. However, I have a new router and have updated their software. There is no button to add an exception (as stated in the article), so I can't just work around it. This problem does not occur with IE, so I have a hard time to believe that it is my router.

  How to solve this problem? I really want to change browser.

  Finally, I tracked the issue. The answer was found here:
  https://support.Mozilla.org/en-us/questions/1028985

  It turns out that Avast has a web shield that passes through its own verification of certificate https. Of course, this feature is not quite right and loses track of the certificates. Disable "https scanning" in the settings of Avast resolved the problem.

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• The connection has been reset during load error 101 help page

  When loading some websites, all browsers and all computers, I get the following error message: "error 101 (ERR_CONNECTION_RESET net) connection was given to zero." & or: "the connection to the server was reset while the page is loading." Anyone know what this means?

  I'm not having wit problems visiting the link you did.

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• I lost the ability to upload files to a Web site. I transfer files from my computer to a web site and I get an error message "the connection was reset" and the file will not download. I try to transfer the photos and I get the same message.

  I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.

  Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.

• "Connection error. Check the Internet connection. »

  I just installed my printer (an HP CM2320fxi upgrade). Everything works except ePrint/Web Services. The printer is connected directly to my router. It prints network computers. AirPrint works from iOS devices. It can scan to e-mail and documents are properly received by mail outside the network accounts (i.e. it must be connected to and talk to the internet). All the router firmware and the printer has been confirmed to date. all devices have been reset and restarted several times. However, if I try to activate HP Web Services for ePrint installation, I get the following error message: "connection error. Check the Internet connection. »

  After struggling with this issue for many months, including many discussions phone and email exchanges with technical support from HP, they finally sent me a replacement printer.  It works as advertised right out of the box.  I don't know what was the underlying problem, but the fact is that he couldn't be corrected with one of the solutions proposed in the discussions on this forum.  Apparently, there's HP printers out there with a lack of internet connection has nothing to do with a solution that is configurable by the user.  If you have one, then you will need to replace your printer.

  I can't thank HP for that.  They tried my patience and tenacity of the months before offering the only real solution.  They must know their products better than that and should have replaced my printer several months ago.  That being said, the tech person with whom I had most of my relationships, it was a nice guy.  I expect he's working under an edict on exhausting all possible tactics before agreeing to replace the unit.

  Good luck!

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!