The CPF in the first XML: Audio Question

Similar Questions

• Image of the song and Audio Question

  I asked for, but could not find an answer. I'm just trying to put a video song together again, a picture and audio. When I export the image is severely pixelated and I can't understand how bounce without distortion.

  I know it's simple. New to first, thanks!

  Yes... 'media' refers to what we put on a timeline, so stills, video, graphics,... and the properties of the media used are important. Awhile back, we had someone who has a problem with the graphics that were fuzzy & pixelated and he couldn't understand why... they were perfect on the DVD, he got from.

  But he was trying to use it on a sequence of 1920 x 1080, and the graphics were 720 x 480. Due to detach from this DVD, because DVD image size dimensions.

  A large number of the video sequence of 4 k shot these days this is being edited on 1920 x 1080 footage, which are the size of the delivery scheduled for work. If you use "enabled to the size of the image" for the media are shrunk to the size of the timeline window...? ... but not resized at all times by the PrPro (as "scale to" would do), you can change your choice at any time, more or less zoom, pan here & back there.

  In this way they can show any video image, or at your option... "zoom in" on a section. For example do a camera interviews, pieces show the person sitting there lap upwards. Another section just watch most of their head... back to the view full... then head & shoulders... back to the view. Yet none of these items have been "extended" past the point of being at least 1920 x 1080 pixels of the original media, so they all look when rendered with.

  But at this point, the media were 4 k. The sequence/timeline was UHD/1920 x 1080.

  Neil

• How to shorten the paths of Audio Previews?

  When the first create audio previews they look like in 50 to 60 characters, and the problem is when I try to delete the files from the root of these previews, or transfer them to another hard drive, I get an error message saying that I can not perform the action because the path is too long, and I agree why the hell they are born with 1 million characters? Is there a way to customize how first names of these files so that they can be shorter?

  I'm on Win 10, first Pro CC 2015.3

  The option only user here is where previews are stored.

• Why the first is loaded all my audio plugins?

  It takes about half an hour as the launch of the program, but I don't have one of these plugins to edit tracks for movies!  Why is it enabled by default?  Is it possible to disable this option?  Otherwise, it is Prime Minister unusable for my studio and will force me to switch to Final Cut Pro.

  In response to my own question, I was able to disable all these in the Plugin Manager Audio once I had cancelled the scan once it got stuck.  I think that these should be taken out of SERVICE by default as little would like audio plugins used in DAW to be analyzed when first loading, and this can always be rekindled in Plugin Audio Manager.

• Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  I'm glad you found the solution in one of my suggestions, Jon. Please mark this question as answered. Thank you!

• Unlink the Audio and video in gray in the first 13 items (Windows 8.1) [new user]

  I posted (or at least I thought the post worked) this Mar.27th question, but I can not find it or that the answers I have gotten so if anyone knows his comings and goings, I would appreciate you tell me how to see while I have 2 threads running for the same question. My question is: why is the ability to separate audio and video tracks greyed when I am trying to replace the part of an audio clip (without ruining the synchronization between audio and video existing). I work with a saved file "projectX.prel". I noticed when I opened a new project that the option to break the LINK is active. This seems contrary logic is to say action to break the link would be more likely to be needed when you are working on an existing file as opposed to when you are working on a new file? How can we separate the 2 components (audio & video) so I can just edit the audio clip without the work of procedure to break the LINK? Would appreciate any help anyone can offer with the foregoing. Thank you.

  garryw

  First broadcast 13 elements 8.1 on windows 64-bit. Have you updated to the 13 to 13.1 yet? If this isn't the case, please do so using Help Menu/updates to date of an open project.

  But for the immediate question...

  I don't see any sign of a previous post you so I'm not sure what happened to your prior shipment.

  When you import a file that contains the video and audio, they come into Premiere Elements project related - party video presenting the

  Video of track 1 and the audio portion on the Audio 1 track.

  If you want to unlink the audio of the video

  a. Select/highlight the chronology of the record and go to video Menu/unlink Audio and video and click it. It does not work.

  or

  b. right click on the file of chronology, and in the drop-down menu, find and click on remove the Audio and video link.

  or

  c. hold down the ALT of the main keyboard to the computer and click drag the audio from the video.

  Please consult the bulletin and review, and then let us know the result.

  If any questions or need any clarification, do not hesitate to ask.

  Thank you.

  RTA

• Adding a RAID card to help speed up the export (and another question reader) in first Pro CC

  First of all, I read the Page Tweakers export section because that is my main concern is. First my questions, then the background and my current and proposed configurations:

  Question 1: Adding a hardware RAID controller, for example an LSI MegaRAID will sufficiently remove the burden of parity management CPU on my RAID 5 software that the CPU will jump of joy and export faster?

  Question 2: If true for above, then compare thoughts on adding smaller SSD for either a RAID 0 or less two RAID 0 volume volume complete HDD RAID 5. In other words, I think the purchase of four Samsung 850 Pro 128 GB SSD to put in a four disk volume to handle everything (projects/media, media, previews, export cache), or split it into two volumes of two disks of each and divide the tasks, or keep the idea of volume four disc and previews and exports on my drive HARD RAID 5 array.

  The 850 are valued at SEQ write: 550 / 470 MB/s so I could get around 2000 / 1500 MB/s read/write to a disk four RAID 0 or 1/2 who, if I divided in two volumes to minimize the volume of read/write at the same time, if it really matters with these SSD?

  The Tweaker page made some comments. A split is carried out the tasks between different drives, rather than a large effective RAID can really slow things down. Because SSDS are much faster than a single HARD disk, I think its more accurate than so I'm leaning towards the configuration of four discs put OS & programs on the C drive, media & projects on media on SSD (2 disks RAID 0) Cache and D (HDD RAID 5), file exchange & Previews & export on 2nd SSD RAID 0 (or combine the two RAID 0 and their functions).

  Just trying to get a point of view here, since I have not bought anything yet. Any experience/stories, I would be grateful.

  My current setup of training:

  My D drive is a software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM hard drives with CrystalDiskMark SEQ read/write of 339 / 252 MB/s.

  The C drive is 500 GB SSD (Samsung 840 (not Pro) and fact 531 / 330 MB/s.) My OS, Program Files and Page file are on C and media data/files/projects, etc. that are all about the RAID drive.

  Problem:

  Current configuration allows for smooth installation, just export seems slow, usually taking between two and two and a half times the video length to export. Thus, a 10 minute video takes 20-30 minutes for export. 15 minute video can take 30-40 minutes to export. The first 10% of the export of re-encoding takes less than a minute (seems fast), but it becomes slower when the final 10 or 20 percent may hang for several minutes as my system is running out of steam. So, where's the waste?

  I activated the hardware acceleration (because the GPU hack my GPU is not listed) and it can break through to 25% use a few times and eat up to 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is slowed down export set. The CPU can boost at 50%, but it seems either too busy.

  Our calendar is simple with two video and two audio streams (a little music and especially the voices), with simple transitions (jump cuts or cross dissolves). Sometimes, we fast correct color, so that could use the GPU? Also, given that we are filming in 1080 P 60 p and 1080 export 29.97 FPS, I think who is scaling and using the GPU. I know that without the GPU, it takes much longer. I excluded buy a faster GPU because it doesn't seem to be breaking a sweat. I just need to know if my system is a bottleneck at the level of the disk hard because I am using software RAID and my disks are slow and hardware RAID will considerably reduce the processor load so it can export more quickly.

  Our files are not huge in nature. Most of our clips are several MBs each. Total files in the project are between 5 GB and 10 GB for each video with Windows Media File export being 500 MB to 1.2 GB on average. Look using Panasonic Camcorders, so the original files are AVCHD, I think (.) MTS files?).

  Considerations:

  1. I think to buy (and future proofing) a LSI Logic MegaRAID 9361-8i is 12 Gb/s SAS and SATA (because some SSD current can exceed the standard 6 Gbps).

  2. I will not replace my current HDD RAID 5 as not in my budget to spend 6 or more large SSD. These discs are more important to me for temporary storage because I delete files saved once. I don't mind a few smaller SSD inexpensive if they can make a significant difference for editing and export.

  I can only guess my RAID HDD is slow but the CPU is burdened by parity. I guess running RAID 10 would not really help.

  My configuration:

  my configuration:

  CPU - CPU i7 - 3930K @4.5 GHz

  RAM - G.SKILL Ripjaws Z Series 32 GB (4 x 8 GB) DDR3 2133 @2000

  Motherboard - ASUS P9X79 WS LGA 2011

  GPU - Gigabyte GeForce GTX 660 OC 2 GB (performed the hack of compatibility list to activate hardware acceleration).

  Drive C - 500 GB Samsung SSD (programs and Windows 7 Pro 64-bit) 840.

  D drive - four 1 TB WD RE4 enterprise hard drives 7200 rpm in RAID 5 software

  Box - Cooler Master HAF X

  CPU fan - Cooler Master Hyper 212 EVO with 120 mm fan

  Power - series Pro Corsair AX 850 watts 80 Plus Gold

  Optical drive - Pioneer BDR - 208DBK

  Thanks in advance,

  Eric

  OK, after overload of information on everything I tried (free), which might be my answer here. I went from codecs to export. When you use Windows Media File, Premiere Pro seems chugging along much slower than when you use the h.264 (not h.264 Blu - Ray). I don't know if it's because Microsoft has found a way to break it or what. But I'm the CPU usage of 70-85% on the 2 Pass of 2 as well as the use of the memory of 40% (or 12 GB). It exported in 14 minutes. Woo - hoo. I then did a similar test using Windows Media File. It took 31 minutes to export. The CPU has spent much of his time in the 30%, especially down in the 1930s mid-1940s with spike for memory usage was only 24% to 35% and 50%. Since then, I've read how h.264 codec is 'plu' for online files. It compresses better with less compression artifacts. He seems better, etc. Well, they both seemed on the same thing for me. I play both on my TV 70 "before I could comment further. In the future, I will consider a RAID controller and upgrade the HDDs to SSDS.

• First Pro CC and the lack of audio tracks for .mts files

  Hello guys,.

  I used to edit my files .mts with first Pro CC with no problems until yesterday.

  Now I import my file .mts (made with a Sony VG900), but the first does not recognize the audio tracks (which I hear fine with VLC).

  I tried changing the extension in .m2ts, but he did not, I also tried to reinstall the first but, even once, it didn't work and I tried (I was desperate) to install the CS6 first just to check if the problem is maybe about the CC version. Guess what? It did not work...

  I tried also to convert the file with the encoder in .mp4, but after the conversion, I can't hear the sound with VLC and, of course, this does not work on the first.

  Don't you think it's a first question or a problem of file?

  I used these same files for other videos (as a http://www.youtube.com/watch?v=H1X5vsZ-5yI) and I had no problem. Then I updated the first, I moved the files in the other folder, and the problem came to life.

  Any idea?

  (I'm waiting for my colleague to send me a new mts file just to check if I accidentally damaged the 'old').

  See the solution for the problem of #1 in this doc: known issues in Premiere Pro CC 2017 (November 2016)

• Emailing to my question mark and supervise the work on the first, then the small e accent when arrives to her frame them and the capital E with the accent comes for the question mark.

  get the e french instead of the question mark or frame them

  Emailing to my question mark and supervise the work on the first, then the small e accent when arrives to her frame them and the capital E with the accent comes for the question mark.  Can you tell me what is the cause and how to fix it.  Thank you.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://windowslivehelp.com/forums.aspx?ProductID=15

  It will be useful.

• Clip showing just the first of a series of mp3 files (audio)

  Recently, I put an audiobook that I had ripped the CD library in mp3 files, on my Sansa Clip.  I started listening to the audio book and when I arrived at the end of the first file (disk 1), he stopped.  When I looked the player, I didn't know the other six files of mp3 for the audio book.  I thought that maybe I had transferred somehow only the first file, but when I'm home and connected the video to my computer, he showed that all 7 files were indeed on the player.  I was able to work around this problem by removing the first part that I had listened to.  A single file on the drive has the mp3 disc 2.  When I finished listening to it, I deleted and is passed to the next.  This isn't just right.  All other audiobook that I listened to shows all the parts and I can hear seamlessly a part to another.  Someone has any suggestions as to why this is happening and any fix for it?  Thank you!

  Peggy

  I found a solution, even if I have no idea why it makes a difference.  I had originally put the mp3 files in a subfolder of audio books.  I am proposing to a subfolder of the music.  Now, all the remaining mp3 files of the audiobook show on the player and can be listened in order when I select 'Play All'.

• Vista plays only 63 seconds of the first song to an audio cd and then goes at the end.

  Vista will play only the first 63 seconds of an audio cd then jump through to the end. This occurs using either media player or itunes. The disc information appears.  My cd set in my other computer which has XP. My DVD/CD ROM works fine for the mp3 discs and installed software. My cd is clean, I have AutoPlay activated.   Help, please

  Hi Meeker,

  Thank you for using Vista answers Forum.

  At this point, you can try to replace the CD drive with a known working drive to test the possibility of a device failure.

  No idea what the error was when it was your PC friend?

  Impatience back on your part.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• Newb question - displays only the first of several fields

  As a first application of Bb, I write a stopwatch and I want the larger time scale and the small milliseconds. As part of what I am trying to display several bitmap or label side-by-side fields, but when I run it using the Simulator, only the first is displayed.

  So, for example, what I want is:

  1-2: 3 4:5:6 7 8 9

  with each number in own field but what I mean is just

  1

  that is the first field. If I then use buttons they all appear in the verticalFieldManager by default in horizontalField Manager but if I use labels or bitmaps, then all I get is the first field, even if I remove the horizontalFieldManager and just use the default verticalFieldManager. I googled the question, this forum and spent several hours reading the code examples and documentation, but I have yet to understand why I can't put several fields of these types of side-by-side. I have to have something between them as separators or empty fields?

  The code that I've got so far is the following...

   public TimerView()    {     super();      HorizontalFieldManager timerField = new HorizontalFieldManager();
  
        Bitmap hour10 = Bitmap.getBitmapResource("num_1.png");        Bitmap hour01 = Bitmap.getBitmapResource("num_2.png");        Bitmap minute10 = Bitmap.getBitmapResource("num_3.png");      Bitmap minute01 = Bitmap.getBitmapResource("num_4.png");      Bitmap second10 = Bitmap.getBitmapResource("num_5.png");      Bitmap second01 = Bitmap.getBitmapResource("num_6.png");      Bitmap ms100 = Bitmap.getBitmapResource("num_7.png");     Bitmap ms010 = Bitmap.getBitmapResource("num_8.png");     Bitmap ms001 = Bitmap.getBitmapResource("num_9.png");     Bitmap colon = Bitmap.getBitmapResource("Colon.png");
  
        BitmapField bfHour10 = new BitmapField(hour10);       BitmapField bfHour01 = new BitmapField(hour01);       BitmapField bfHourColon = new BitmapField(colon);     BitmapField bfMinute10 = new BitmapField(minute10);       BitmapField bfMinute01 = new BitmapField(minute01);       BitmapField bfMinuteColon = new BitmapField(colon);       BitmapField bfSecond10 = new BitmapField(second10);       BitmapField bfSecond01 = new BitmapField(second01);       BitmapField bfSecondColon = new BitmapField(colon);       BitmapField bfMs100 = new BitmapField(ms100);     BitmapField bfMs010 = new BitmapField(ms010);     BitmapField bfMs001 = new BitmapField(ms001);
  
        timerField.add(bfHour10);     timerField.add(bfHour01);     timerField.add(bfHourColon);      timerField.add(bfMinute10);       timerField.add(bfMinute01);       timerField.add(bfMinuteColon);        timerField.add(bfSecond10);       timerField.add(bfSecond01);       timerField.add(bfSecondColon);        timerField.add(bfMs100);      timerField.add(bfMs010);      timerField.add(bfMs001);
  
          add(timerField);  }
  

  I know that this code violates probably some best practices or standards, but I intend to clean later.

  -edited for spelling

  Give it a go with images of the numbers.  You have it easy with BitmapFields, because you know how much space they need with

  getPreferredHeight() and getBitmapWidth().  Then you should be able to stick them next to each other.

  If I was doing this and who are looking for a special look at the clock, which seems to be what you are doing, I would like to have the digital icons as you do, and then set an image large enough to hold the value of the clock and in my routine of painting, select draw digital icon proper, in the right place.  As long as you load the bitmaps only once, I think it's the most effective way to do it.

  Of course, a much simpler way would be to have just a RichTextField formatted as you suggest - RichTextField because you can have two different fonts in a single field.

• Turn 1 2 audio channel in the first CC

  Hello! I recorded some audio is only in the left channel because I couldn't understand how record left and right. I'm trying to find a way to take my left channel audio and duplicate it for the right channel, so I have mono audio in both channels. Have not done that since my FCP 7 days where it was fairly easy, and I don't know that miss me a relatively simple solution in the first. Any thoughts?

  The Audio effect to "Fill right" could be what you are looking for.  It's under the effects > Audio Effects > fill from right to left.

  Although, according to your tracks audio source configuration and your audio tracks in the sequence, you will need to look more closely at Vinay links in his post.

  -Warren