The creation of a virtual serial Port for Windows 7 hot Synch an old Palm Treo 700 p with Palm Desktop by Bluetooth

I am trying to synch (HotSync) an old Palm Treo 700 p with Windows 7 by Bluetooth and the Palm Treo 700 p tells me that I need to create a virtual serial port on the Bluetooth on my PC to synchronize.  I can't understand how to create this port in Windows 7.   Can someone help me?

Try this link to TechNet for this solution.

https://social.technet.Microsoft.com/search/en-us?query=Windows%207%20create%20A%20Virtual%20Serial%20Port&AC=5

Tags: Windows

Similar Questions

  • Are there any drivers for the canon digital rebel eos 300 d for Windows 7

    Are there any drivers for the canon digital rebel eos 300 d for Windows 7?

    Hello

    Like you need help with the driver for Canon digital rebel EOS 300 d, you will need to contact the manufacturer of the product for the driver. According to the Windows 7 compatibility check, this particular camera is not compatible with 32-bit (x 86) as a 64-bit (x 64) operating system.

    For more information about the Windows 7 compatibility, visit this link: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&s=canon%20digital%20rebel%20EOS%20300D&type=Hardware&page=1&os=32-bit

    For more information about the driver, visit this link: http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_digital_rebel?selectedName=DriversAndSoftware

    I hope that helps!

  • virtual serial port (offered by a USB device) may not be reopened once the device has been lost and reconnected

    To connect to a virtual serial port offered by a USB device.
    -Physically disconnect the device (disappears from the entry in Device Manager)
    -Reconnect the device. (It reappears in the Manager of input devices)
    -Close the file handle
    -Reopen the virtual serial port. --> the CreateFile() call always fails with "ERROR_FILE_NOT_FOUND".
    -After dis - / reconnect the USB device once, the serial port can be reopened

    Even the true return of GetDefaultCommConfig there yet in CreateFile().

    It is clearly bad habits, because in our case the disconnection/reconnection occurs due to a restart of the device; and it's quite embarrassing to explain buyer for the disconnect/reconnect the device.

    Is there another workaround solution to clean the window's internal data structures or show me how to open the port?

    Hello

    The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

    http://social.msdn.Microsoft.com/forums/en/categories/

  • HP dc 7800 how can I install the driver for serial port pci Windows 8.1

    HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help

    Hello:

    Download and install the W7 AMT driver.

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • Problem creating virtual serial port (perl)

    I am trying to add virtual serial ports using vi perl. I don't get complaints about the creation of the device specification or specifications of the virtual machine, but for ReconfigVM() I get this error.

    I have attached a better list layout of the dumpster and snip code, if the following is too hard to read.

    Thank you

    -David

    Error:

    SOAP fault:

    Error string: invalid configuration for the device '0'.

    Lack of details: InvalidDeviceSpec = HASH (0xb625118)

    Dump:

    $VAR1 = bless ({}

    'fileOperation' = & gt; ({bless him

    "val" = & gt; 'create '.

    (}, 'VirtualDeviceConfigSpecFileOperation'),

    'operation' = & gt; ({bless him

    "val" = & gt; 'Add '.

    (}, 'VirtualDeviceConfigSpecOperation'),

    'device' = & gt; ({bless him

    'yieldOnPoll' = & gt; 1,

    "connectables" = & gt; ({bless him

    'allowGuestControl' = & gt; 1,

    'connected' = & gt; 0,

    'startConnected' = & gt; 1

    (}, "VirtualDeviceConnectInfo").

    "backup" = & gt; ({bless him

    'noRxLoss' = & gt; 1,

    'end point' = & gt; ({bless him

    "val" = & gt; 'server '.

    (}, 'VirtualSerialPortEndPoint'),

    "pipeName" = & gt; ({bless him

    "pipeName" = & gt; "/ tmp/Test-Serial1".

    (}, "VirtualDevicePipeBackingInfo")

    'VirtualSerialPortPipeBackingInfo'),

    'unitNumber' = & gt; 1,

    "deviceInfo" = & gt; ({bless him

    'Summary' = & gt; "/ Tmp/Test - pipes Serial1",

    'label' = & gt; "Serial Port 1"

    (}, "Description");

    'controllerKey' = & gt; 400,

    'key' = & gt; -1

    (}, "VirtualSerialPort")

    (}, "VirtualDeviceConfigSpec");

    Code:

    My $vdSpecOp = VirtualDeviceConfigSpecOperation - & gt; new ('add');

    If ($pipe & & $pipe - & gt; key) {}

    $controllerKey = $pipe - & gt; key;

    } else {}

    $controllerKey = 400; key # to Virtual Serial Port

    }

    If ($pipe & & $pipe - & gt; unitNumber) {}

    $unitNumber = $pipe - & gt; unitNumber + 1;

    } else {}

    $unitNumber = 1;

    }

    My $endPoint = VirtualSerialPortEndPoint - & gt; new ('server');

    My $vdpName = VirtualDevicePipeBackingInfo - & gt; new (pipeName = & gt; $pipeName);

    My $backingInfo = VirtualSerialPortPipeBackingInfo - & gt; (new)

    pipeName = & gt; $vdpName,

    endpoint = & gt; $endPoint,

    noRxLoss = & gt; 1

    );

    My $connectable = VirtualDeviceConnectInfo - & gt; (new)

    allowGuestControl = & gt; 1,

    connected = & gt; 0,

    startConnected = & gt; 1

    );

    My $devInfo = Description - & gt; (new)

    Label = & gt; "Serial Port $pipeNum."

    Summary = & gt; "Tube $pipeName.

    );

    $pipe = VirtualSerialPort - & gt; (new)

    yieldOnPoll = & gt; 1,

    connectable = & gt; $connectable.

    backup = & gt; $backingInfo,

    unitNumber = & gt; $unitNumber,

    deviceInfo = & gt; $devInfo,

    controllerKey = & gt; $controllerKey,

    key = & gt; -1

    );

    My $fileOp = VirtualDeviceConfigSpecFileOperation - & gt; News ($specFileOp);

    My $pipeSpec = VirtualDeviceConfigSpec - & gt; (new)

    operation = & gt; $vdSpecOp,

    fileOperation = & gt; $fileOp,

    device = & gt; $pipe

    );

    My @specList = ($pipeSpec);

    My $vmSpec = VirtualMachineConfigSpec - & gt; New (deviceChange = & gt; \@specList);

    EVAL {$vm - & gt; ReconfigVM (spec = & gt; $vmSpec)};

    Hi David,

    The error is because you don't have to specify the 'fileOperation' in the VirtualDeviceConfigSpec to add serial ports. The virtual machine correctly, reconfigure if you remove the following line:

    > fileOperation = > $fileOp,

    In addition, properties "pipeName" and "end point" of "VirtualSerialPortPipeBackingInfo" are strings. Thus, instead of

    > my $endPoint = VirtualSerialPortEndPoint-> new ('server');

    > my $vdpName = VirtualDevicePipeBackingInfo-> new (pipeName = > $pipeName);

    You simply do:

    > my $endPoint = "server."

    > my $vdpName = $pipeName;

    Hope the above helps you to resolve the error.

    Neha

  • virtual serial port

    I have a portable satellite wih only USB ports, now I have a GPS18USB but the Route66 programm wil only work with a gps series. I have now that it is possible to create a virtual serial port that can help me and tell me how
    email please at [email protected]

    Hello Hans,.

    I had searched the internet on installation of a virtual COM port, but I only find solutions based manufacturer. So I think that the driver or the software that generates the virtual COM port is based on the product that you (in your case, the gps system).

    The manufacuring company request a solution!

    But if they don't have a solution, I found a link on the internet that might help you! But if you want to test I will assume no responsibility for the consequences such as loss of data after a system crash.

    http://www.ftdichip.com/FTWinDriver.htm

    Good luck!

    Sam

  • virtual serial port? Vista 64-bit, usb, palm 755 p verizon dongle

    I have a new Vista 64 bit operating system and I'm having problems that everyone else is still.  Can't hotsync using the cable.  I bought the dongle bluetooth (Kensington) that many have said works.  My phone recognizes the PC.  My instructions on the phone that warm using bluetooth synchronization tells me to set up a virtual serial port.  The instructions are not very clear.  This is where it falls apart for me.  Can someone explain how to configure this virtual serial port?  Thank you.

    Well, I'm pleased to announce a successful solution.  On the recommendation of some other son that I left and piece and ioGear GBU321 Bluetooth USB key and Setup was a snap and it works (although SLOOOWLY compared to a connection cable, a while and plug your treo during your first sync).

    To setup you do the following (and this can also work for your Kensington):

    • Insert the driver CD
    • Insert the dongle when asked.
    • Install the drivers
    • Pair your device.  Basically, go to the configuration Bluetooth on the Palm screen and select "Trusted Devices".  You will find the bluetooth adapter, select it, and then the Palm or PC will provide or ask a pairing code.  The instructions will guide you through, but basically, you'll want to make sure that the same numbers are registered on both screens (this prevents you from accidentally pairing with some random near the computer)
    • This will actually set up your virtual port for you.
    • You can go to the hotsync Manager and click on "serial" and select the port created in the pairing process.
    • If you don't know which port has been created "Control Panels" and select "Phone and Modem" (assuming that you are in "Classic view").
    • Click on the modem tag and you will see something like 'Standard Modem over Bluetooth link' and next to that it will be the assigned port.

    I hope this helps.  I know that I was relieved not to have to trash my Palm or my PC (although when the Pre or iPhone with a physical keyboard comes out all bets are open)


    Message is about: Treo 755 p (Verizon)

  • the program associated with the creation of a virtual instrument of Lab View. Please help me

    I have a question with the program associated with the creation of a virtual instrument of Lab View. 1. creation of virtual instrument based on the NI 9401 module mounted on the chassis NI DAQ of Compaq (nor-cDAQ-9172). Creating a virtual tool should apply the following counting pulses in series of the pulse, visualization of data by means of a digital indicator, by comparing the number of impusite with a predetermined value, this value can be assigned by the user. Indicator light when you get to reach the number of pulses, the ability to reset the counter of a button on the front panel. Digital output switch when reaching the number. I hope someone can help me.

    What is your question? You have described what the program is supposed to do, but it is unclear what you're asking about. Do you need help to get started? If so, what you have gone through the tutorials of LabVIEW? You and look at the material in tutorials the NI Developer Zone Learning Center , which provides links to other materials and other. You can also take a course online for free. Have you looked through numerous examples provided with LabVIEW for data acquisition?

  • How to create a Virtual Com Port in Windows 7 for Palm HotSync

    I've just updated wo Windows 7 Pro 64 bit.  Because Palm does not support USB synchronization under a 64-bit system, it tells me that I need to create a virtual com port for my bluetooth device to synchronize.  I can't understand how to create this port under Windows 7.

    Hi Sonmox,

    Welcome to the Microsoft Answers site!

    In the Sub in view of the link you need to download the Palm Desktop and HotSync Manager. This software allows you to synchronize your device Palm with your computer, for your info is backed up and easily editable on your computer.

    Visit the following is given link of Palm and configure your Bluetooth device.

    http://KB.Palm.com/wps/portal/KB/common/article/49229_en.html

    When you set up your Palm device to synchronize using Bluetooth technology, you create a 'Bluetooth partnership' between your devices your computer (also known as "pair" or "trusted device"). This allows you to synchronize your device wireless and your computer have to authenticate each other, every time that you synchronize.

    Follow the steps in the document to sync your Bluetooth device.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to access a host USB Virtual Serial Port from a VM Application?

    I have a Linux VM running under VMware Player 5.0.2 on a Linux host machine.   I have a development system running on the computer, virtual trying to download the code on an external device connected via a virtual serial port USB host (ttyACM0).   Anyone doing programming Arduino device will be familiar with my software/hardware config.  Dev VM system does not directly hear the ttyACM0 port I need to establish some sort of connection bridge between "ttyACM0" host port and the port of VM-configured "ttySx"?   Someone did something like this with a VM Player?

    FYI, I found the answer to my own question in an old post on a similar topic. Here's a response provided by the user 'Worker' in the former post office that was the solution to my problem.  I followed its general approach and mounted my own virtual *.vmx machine configuration file to change the serial port set of ' / dev/ttyS1 "to" / dev/ttyACM0 ' I can now download code on my device directly from the Arduino IDE running on the guest VM system.

    *************************************************************************************************************************************************************************************

    9 re: USB serial adapter - / dev/ttyUSB0 serial not a device?

    Worker (1 positions since November 23, 2010) November 23, 2010 12:56 am (in response to AnthonySowden)

    A bit of an old thread here, but I wanted to say that I was able to do exactly this yesterday using VMware Server 2.

    It wasn't easy, but I managed to hack in there.  I guess that this trick works also on VM WS but I have not yet tested.

    Here are the steps:

    Start your VM turned off.

    Add a serial port of your virtual machine through the normal interface. -J' I just let it use/dev/ttyS0.

    Go to your virtual machine folder and edit the .vmx config file.

    Find the line:

    Serial0.filename = ' / dev/ttyS0 ".

    Replace:

    Serial0.filename = "/ dev/ttyUSB0 '.

    and off you go.  The guest operating system sees it as a real physical serial port and is fortunately out my system through series console!

    Hope that helps other people.

    ************************************************************************************************************************************************************************************

  • Limited virtual serial ports

    Hello

    Is it possible to add more than 4 virtual serial ports to VM?

    P.S. 4 virtual serial ports works only with the EFI firmware. With BIOS firmware only works under MS Windows. Is this normal?

    Hello

    The maximum is four - http://www.vmware.com/pdf/vsphere5/r50/vsphere-50-configuration-maximums.pdf

  • Where is the serial number for Windows 7?

    Just got my Edge 13, and I was wondering where I would find my serial number for Windows 7 Home Premium? Normally, there is a stick on the bottom of laptops with this information?

    Hi and welcome to the forum!

    Look in the battery compartment, it should be there.

    I hope this helps.

  • I just bought 14 items and must have missed something because the order only gives me downloads for Windows and I'm on Mac. I have the serial number for Windows download. How to move to Mac downloads?

    I just bought 14 items and must have missed something because the order only gives me downloads for Windows and I'm on Mac. I have the serial number for Windows download. How to move to Mac downloads?

    Hello

    Please see a product for another language or version of trading platform

    Kind regards

    Sheena

  • I have a serial nuber for windows and you want to use it on a mac, can I exchange the number?

    I have a serial nuber for windows and you want to use it on a mac, I can swap the number so I can use it on mac?

    Its for Photoshop CS 5 (not CS 5.5)

    I'm pretty sure that Adobe began that allow approaches sectoral cross-platform with Photoshop CS6 you probably aren't lucky. Sorry to be the bearer of bad news.

    Terri

  • I want to use the chat to get a serial number for installation of Adobe Acrobat Pro DC. How chat with someone at adobe?

    I want to use the chat to get a serial number for installation of Adobe Acrobat Pro DC. How chat with someone at adobe?

    Hi robertr41760081,

    Please follow this link Contact Customer Care, sign in using your adobe ID & click on the "still need help? Contact us"button to initiate a chat with our customer support team.

    However, you can also find the serial key using this link https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

    Kind regards

    Nicos

Maybe you are looking for