The cursor keys are not properly changing to the next/previous image

Similar Questions

• Satellite L50-B-127 - some keys are not working and touchpad blocks constantly

  Before leave here an apology because I'm Portuguese and my English level is very low.

  My computer is a Toshiba Satellite L50 B 127

  Lately, I noticed some anomalies which appeared me on my computer (which should take about a year). When I speak of anomalies refer to the keys you use rarely, and at this stage do not work (example: arrow left, Z,...)
  Not to mention that I noticed that my touchpad is constantly blocking, that is to say after the buttons to work, the cursor does not move, being sometimes more than 20 seconds to wait for the cursor to return to normal.

  If anyone has had this problem or knows the cause and the solution? Recognizing a response as soon as possible

  Hello everyone, I'm here to post my problem that has caused me a lot of problems and troubles and especially apologize because that throughout this text should meet several errors since my English level is low

  My computer is a toshiba satellite L50 B 127 and has a little more than a year of use

  Lately, I found some anomalies in my computer including some keys from one day to the other crashed, these keys are not widely used (arrow to the left, z, dash). In addition, my touchpad has been constantly block of minutes in minutes, even if the buttons on the touchpad still work, the truth is that the block cursor for a few seconds and then comes back to work as if nothing had happened. In 10 minutes, however this situation occurred four times

  I would be grateful if someone knew the reason why this happens or even the solution to answer me as soon as possible

• FN keys are not displayed on-screen Portege Z30T-A

  I recently bought a new PORTEGE Z30T-A PT24CE-01600EN5

  It is pre installed Win7 and I upgraded to:
  OS Microsoft Windows Version 8.1 Pro 6.3.9600 with their CDs.

  The problem is that the FN keys are not displayed on the screen.
  When I got my laptop under Win7 I would press the FN key and options would appear on my screen, it was great. But after a day, it does not display anything on the screen.

  How can I solve this problem?

  Post edited by: djemo

  Hello

  At first, I must say that the described issue is not a problem.
  Under Win8.1 Toshiba offered the use FN keys in two modes:
  -Special mode of operation
  -Mode of F1 - F12 standard.

  If you use open Win8.1 Please help Desktop > tools & utilities > system settings > keyboard.

  Here you can change the mode of function keys.

  Please test its operation.

• Soft keys are not visible on Simulator

  Soft keys are not visible on BB10 Simulator by clicking on textfield. It will be visible on real device

  You use the resolution of 720 x 720 in the Simulator? There are no virtual keyboard as the device has a physical keyboard. You can use your keyboard to office as input.

  To test the virtual keyboard, make sure that you start the Simulator in the fulltouch option 1280 x 768. This option is visible during the initial start of Simulator.

  Thank you

• ePub graphics are not properly sized

  ePub graphics are not properly sized after transfer ePub to my iPad via iTunes.

  I use indesign 6.0 on microsoft system 7 and transfer the ePub to my new iPad (32 GB, 2048 x 1536 resolution).

  The graphic is set for "rasteration custom" size defined "compared to the width of page".

  The chart appears correctly in the Adobe Digital Editions software, but when I transfer the ePub to my iPad it looks full-size.

  If I put the lid "rasterize first page" the graphic on the cover is sized correctly, but the graphics in the document are full size.

  When I create the same file using inDesign 5.5 everything works correctly.

  What I'm doing wrong or what setting I have not put properly?

  Thank you

  Dennis

  Welcome to the world of how different EPUB readers manage the same code HTML and CSS.

  I just did a test with an image that had the Relative to Page and Custom pixelation of InDesign CS5.5 and CS6 format settings.

  As far as I can tell that each version of InDesign is written the correct code but in a different way. ADE meets it, but iBooks on your iPad does not work.

  Here are the details: I created a framework for broad text of 45 pica and anchored a 14 pica graphic framework.

  InDesign CS5.5 the relative size of exports under the image like this tag:

  

  InDesign CS6 creates a class for the

  tag graphic image and referenced in the CSS it creates. Here's the HTML code:

  
  
  />
  

  Here is the CSS for the image-1:

  }
  {img. Frame-1
  Width: 27%;
  }

  I would say that these two are the correct code. However, iBooks handles differently the CS6 version.

  Here's how the CS5.5 version looks in iBooks:

  

  And here's what the CS6 code looks like:

  

  It handles differently. So I would say that, if it is important that on the iPad, it is smaller, you must modify the code to insert the attribute of scaling in the HTML instead of the CSS tag,

• How can I disable the next/previous button at the bottom left of the Windows Picture and Fax

  I am a beginner of the windows developer, please help me.

  1. How can I disable the next/previous button at the bottom left of the Windows Picture and Fax Viewer? E.g. change Registory or others...
  2. when I click the print on the Windows Picture and Fax Viewer, the image of the current directory

  will appear in print wizard, how can I show only the currently shoing image?

  Note: windows XP SP3

  Hi NewsAru,

  Unfortunately, there is no way to disable the next\previous buttons in Windows Picture and Fax Viewer.

  When you try to print an image by using Windows Picture and Fax Viewer it would display all available photos in the folder that contains the image you have chosen to print.

  Overview of Windows Picture and Fax Viewer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/image_toolbar.mspx?mfr=true

• Reinstalled XP on laptop, now the keyboard keys are not mapped correctly

  Hello world

  I recently reinstalled Windows XP on my laptop because it became mega sucky and slow after three years to have. In any case, the keys on the keyboard are not how they were originally. For example, pressing SHIFT + ' originally produced @, now is '. '. Also initially produced shift + 2 "now it's @." There are a few questions like these across the keyboard. Could someone point me in the right direction to solve this?

  Thank you very much!

  David

  25/08/2010 09:10 am, diddlewotsit wrote:

  Hello world

  I recently reinstalled Windows XP on my laptop because it became mega
  sucky and slow after three years to have. In any case the keys on the
  keyboard are not how they were originally. For example, by pressing
  Shift + ' originally produced @, now is '. '. Also shift + 2
  originally produced "now it's @." There are a few questions like these
  throughout the keyboard. Could someone point me in the right
  direction to solve this?

  Thank you very much

  Control Panel > regional and Language Options > languages.  Click on the Details button and change the entry to the keyboard.

  John

• OOB Cluster keys are not as planned in the 11.1.1.7.4 OEDQ

  Hello team,
  We have an obligation to check the name of Individual (Contact) /Entity (Organization) for the match and face-down question in it.
  Individual (contact)-
  Siebel sends the full name of the Disqualification. To end Disqualification, we created a custom attribute "FullName" and correspondent to a rule to check "FullName 60 to 80% match. Also we have included the FullName attribute in the clustering process, so that Disqualification can send FullName as a cluster key. Disqualification sent successfully the key based on the full name of Siebel, but the key is not based on our "match full name 60-80%" rule Whenever Disqualification sent the exact value of the full name.
  For example
  Siebel sending a record with FullName - "Philippe Coutinho", for this Disqualification sends value of the key - "Philip Countinho. Next time siebel then send save "Philip Cotinho", for this record what Disqualification send "Philip Cotinho" as a key value. Due to the value of this key siebel is unable to find any possible maching record in the S_DQ_CON_KEY table. Whenever Disqualification sent the value of the key as the exact value of the full name. For this reason, our "Full name 60-80%" rule is a failure.
  Entity (Organization)-
  Siebel sends entity name to the Disqualification. At the end of the Disqualification we existing it mapped to the attribute 'name', we also have a matching rule "60 to 80% of name matching. Every time when siebel sends the name of the Organization to the Disqualification. The Disqualification sent back up the cluster key "NSD ^ 1 ^ EntityName ^ '.
  For example
  Siebel sending a record with name - "LIVERPOOL" for this Disqualification by sending the value of the key - ' NSD ^ 1 ^ LIVERPOOL'. Siebel sending second record "LIVERPOUL", the next time for this Disqualification issuing key value - ' NSD ^ 1 ^ LIVERPOUL'. Due to the value of this key siebel is unable to find any possible maching record in the S_DQ_ORG_KEY table. Whenever Disqualification sent the value of the key as the exact value of the name of the entity.

  The logic of key generation is not based on the corresponding rule.

  Could you please help us to solve this problem?

  Kind regards

  Trilok Singh.

  There is no "internal matching" in real time. Siebel appears of correspondences with the driving record and Disqualification never returns matches for driving record - unless you have substantially changed the process. If they are games or not depends on your configuration.

  Entity keys look not valid for me, suspect you have given dummy in many address fields.

  I would encourage highly lets you test all changes made to the Disqualification using the web services Tester, noting for the corresponding services, you must specify the entrance of candidates like 0 for driving records and 1 for the applications of the candidates. Siebel connector does it automatically for Siebel calls.

  I also strongly encourage you to frequency profile key S_DQ_CON_KEY and S_DQ_ACC_KEY values. If you have key values shared by more than 200 to 300 records, you can see problems with the fact that there are too many candidates for a driving for efficient matching record to take place and you may need to customize the process of grouping key-gen to strip the anonymous data before generating keys.

• Dell: inspiron 1525 not boot from a USB stick, USB key are not not in the start option.

  Hi all

  I bought this dell laptop inspiron 1525 in the year 2008 with mentioned configuration:

  Core 2 duo processor

  1 GB OF RAM

  Due to some problems in my windows vista, I decided to install a new windows vista in my laptop. I run the dell support live cd at the start of my laptop and created the partitions on my system. But while the new installation OS on the cd i found that optical drive of my system does not work very well. so, I decided to install the new OS of USB. I went to the BIOS and selected the USB key in the boot sequence. but when I tried to install the new OS while pressing the F12 key, USB key is not listed in the start option.

  could someone help me to install the new OS in my machine? It is very urgent that my machine is down for 1 week.

  Please try attached BIOS changes screenshot than everything be useful to me.

  Thank you

  Gurpreet

  Hi Gurpreet,

  Thank you for your response.

  My apologies if I seem repetitive, but when you go to the Option of boot sequence in the system configuration screen, do you think that the USB storage device listed? And do you see a number in front of it?

  Go to the option for embedded devices and check if the USB ports are enabled or disabled. If disabled, change the option and enable the USB Ports.

  If this step does not help, go to the Maintenance option in the system configuration screen and press enter on 'Load Defaults'. On the side right, highlight 'Continue' in green, press Enter and then save & exit.

  Please keep us informed of the results.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• [Acrobat Reader DC] The HKCU registry key are not replicated for each user than Adobe Reader

  For Adobe Reader, all the registry keys that are added with the Adobe Customization Wizard are automatically added to each user. Unfortunately, it is not the same with Adobe Acrobat Reader DC.

  They have registry keys must be stored in HKEY_LOCAL_MACHINEWow6432Node\Adobe\Acrobat Reader\2015\Installer\Migrate to automatically add in the HKCU to the user at first launch of the application. But they are stored in HKEY_LOCAL_MACHINEWow6432Node\Adobe\Acrobat Reader\ [RegistryHiveName] \Installer\Migrate, as we can see on the screenshot below:

  

  The problem is probably one of the custom action. The registryhivename variable is not translated. I do not have a lot of research, but waiting on a solution from Adobe, I did a PowerShell script that move registry keys in the right place:

  Move-Item - Path "HKLM:\SOFTWARE\Adobe\Acrobat" [RegistryHiveName'] \Installer\Migrate\*'-Destination "HKLM:\SOFTWARE\Adobe\Acrobat" - force

  (PowerShell must be run in 32-bit)

  If Adobe can fix in the next release, !

  Hi, Maxim,.

  We recorded a bug for it and working on it.

  Kind regards

  Rave

• "your video card drivers are not properly installed, are obsolete or are for the DARDWARE not supported"

  This message returns constantly to the illusion that after I saved this computer, using the product key and installed the FREE TRIAL of Microsoft Office version for the next 3 months. During installiation, Windows kept saying that "C drive has NO ENOUGH SPACE" and required "delete" old "unused programs", I agree, but it has never been the question on the hard disk drivers.
  I have Windows VistaHome Preimium for 3 years, (this page is not available here in your web site) and since the 19th of February2010, I read all "advising them," trying to 'restore', nothing helps. Last year the illusion was intalled easily and high speed. I've never met a single problem, the same computer, same material, just suddenly become 'unsupported', I need Windows just restore all my setting back and stop deleting my settings and downloads. How can I restore material that has been removed from Windows from my computer? Help, please.

  ArgonautAmber,
  Then you get this error from the program of Secondlife or do you have other programs as well?  How much free space is on your hard drive?  Have you updated your driver video crad lately? You have an active antivirus program running?  If so, is up to date and you have scanned your system lately?

  What I suggest you to start with:
  Run the disk error check to see if there is any problem with the player.

  Check the free space on the hard disk.  If you run very low then you may need to delete the old unused programs or to archive documents of CD Si you have not emptied the trash lately, do the same.

  If you do not have an antivirus running, then take a look at these:

  Get rid of malware

  Can I clean an already infected computer?

  Check the video card manufacturer's Web site and download the latest driver for your hardware.

  Let us know the results.   Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio F50 - 10K - multimedia keys are not lit

  According to my topic

  "" Qosmio F50 - 10K - replaced by Qosmio F60-126? ".
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59934&TSTART=0

  I had problems with my laptop, located at the Nvidia 9600 M GT graphics according to Toshiba service. They changed the graphics card with a new one today and so far everything is going very well and smooth. He collapsed again. Time will tell whether or not it returns to his old ways.

  In any case, after I took up my F50 - 10K I noticed that the indicators for media buttons (Play / Pause, Stop, Dolby, etc) are not lit. The buttons work fine, but they are not on. All other indicators (the light bar on the touchpad, the volume light) and the power light work fine. There is a button to deactivate/activate the indicators, but it does not work for media indicators.

  Before giving my laptop to the service of all the indicators were at work. Now, the indicators of media came out. No idea how to re-enable?

  Hi Jwrath,

  I doubt s a hardware problem because they do not work properly and the lit / functions are controlled by added value package. In your case, I recommend reinstall Toshiba Value added Package from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the VAP, restart the computer and install the new VAP software.

  In addition, check the BIOS. I don't know if there is an option for Mr. lighting if so, enable it and that s.

• some of my keys are not tpying letter and numbers tht are ment to do

  some of the letter keys are type numbers, but if I hold the fn blouse he types the rite even letter as numbers so0e

  Turn off the number lock. If there is not a dedicated for this key, it takes a combination of keys + fn. Search for "Num Lock" in blue letters and hold FN and press the NumLock key.

• all pages are not properly displayed.

  Windows kept closed so I had to do something with the hard drive if I remember.pretty that I changed a few settings, but can not remember what.for instance if I go on facebook, a few pictures on the screen do not appear, just a box with a red in it.also on Facebook poker x, pages displayed incorrectly, also on my dreamteam page.please help because I am not very good with computers.thanx

  Make sure that the "Show image" option has not been turned off.
  If the option to show images in Internet Explorer is turned off, you can not see pictures. To determine if the show pictures option is disabled, follow these steps:
  1. in the Tools menu, click Internet Options.
  2. click on the tab advanced, under settings scroll 'Multimédia' and make sure the "Show pictures" checkbox is checked.
  3. click on OK.

  If this does not work, see the following Microsoft article below:
  Images are not displayed on Web sites in Internet Explorer
  http://support.Microsoft.com/kb/283807

  I hope I could help

• Clustering: Some grains are not properly replicated

  Hello world

  I'm doing our request to ADF runs on a cluster server. I did everything the Oracle docs said but it works partially.

  Then, when I stop the managed server that I am connected and I do an action on the application of the ADF, my session is not lost, but I'm still back to the homepage. After some debugging, I find that our MenuBean (scope = session) are replicated only after the login and the subsequent changes are not replicated. Here's how my tracks looks like, I print the current tab and the number of times I've done a navigation.

  Here's what my logs...

  • Server #1 - homepage (Count = 0)
  • Server #1 - first tab (Count = 1)
  • Server #1---deuxieme tab (Count = 2).
  • #1 server is off... Can I do an action on the second tab
  • Server #2 - homepage (Count = 0)

  Why? Does anyone have an idea of what could be the problem?

  Thank you very much

  Guillaume

  JDev 11.1.1.7

  WLS 10.3.6

  I finally managed to get this job!

  It seems that the Oracle docs say nothing about the need to notify when we modify a bean in a session scope, we mark the bean as "modified" for have replicated it to the other server, as in the example below.

  Thank you for all your help

  Guillaume

  When you design an application is running in a clustered environment, you must:

  • Ensure that all beans controlled with a service life longer than a single request are serializable (in other words, they are implementing the java.io.Serializable interface). Specifically, beans stored in session scope, page flow extended and brought the view must be serializable.
  • Make sure that Oracle ADF is aware of changes to the controlled beans stored in ADF litters (view scope and extent of page flow) and turn on track changes to ADF memory scopes.

  When a value of a managed bean to be seen extended or page flow is modified, the application must notify Oracle ADF so that it can ensure that the new value of the bean is replicated.

  Configure high availability for Oracle ADF, and WebCenter Applications - 11g Release 1 (11.1.1)

  public void setValue(String value) {
      this.value = value;
  
       // I'm not sure which one of the two is required
      ADFContext.getCurrent().getSessionScope().put("myBean", this);
      FacesContext.getCurrentInstance().getExternalContext().getSessionMap().put("myBean", this);
  }