The custom user desktop

Similar Questions

• Shared "Top N" gets access denied - the custom user interface

  I shared some dashboards for a standard user to vCops the custom user interface, and the "Top N" widgets do not work.

  So far, everything has been fine.

  I shared a dashboard home, as well as a vCops of the box and a pak of SAP management dashboard.

  All widgets 'Top N' display 'access denied to the requested page.

  Other parts of the same work of dashboard (home).

  Any thoughts?

  There is a permission that you add to the group to which you share the dashboard. There are permissions to a 'Top - N analysis' you must give to this group. In the contrary case, the refusal of access will appear when users in this group are attempting to access the dashboard in question.

• How close/hide dashboard appearance "pinned" in the custom user interface

  There is a dashboard in the custom user interface that is not a small "x" in the upper right tab that would be closed/hidden. Is anyway, in the interface user or cmdline that let me close/hide this dashboard? Screenshot attached. 5.8.2 running

  
  

  Never mind. A dashboard that would not close was marked as "default" dashboard. If you want to close a dashboard that is marked as 'failure', a different dashboard by default and it then you can close the dashboard that you couldn't close before.

• Determine the maximum use of the processor for a virtual computer in the custom user interface

  I want to determine the maximum use of the processor for a virtual computer in the custom user interface.  How can I do this?

  If I use a supermetric, there is no kind of attribute under CPU called "maximum use.

  Certainly, you get points for a long question! Although to be fair, it's probably my fault to feed you so much information to digest at once.

  1. I would say you can do two ways visually. Use the operations > detail view for 'normal ranges' use the upper limit of the normal range as your typical max. You want an absolute peak, add the metric of a graph or observe that highlight high and low watermarks.

  2. There are a lot of ways to display data, but if you want to display a single metric over a period of time, we could use the following widgets [on top of my head]:

  Top - N analysis

  Weather map

  Analysis of distribution of data

  Among these, I think of your desire for a "peak". Who you want real value, which eliminates the weather map. Then, I think that the concept of a 'Summit' and what is the best thing, I think that the 95th percentile... then I came with the widget of data distribution. The decision is ultimately yours given your particular use case.

  3. you can have it apply to several virtual machines - it's just a widget capable of being an independent provider or receiving widget (metrics, DO NOT choose to select resources). Each resource/metric will add to the widget and you can remove them if you like after it is added. You can certainly all the time you visit... It is date and time standard options you have in all the other widgets chart. With the widget data distribution, you want as much time as possible to get an accurate histogram of the cycles of workload.

  4. This is similar to the question above. You can certainly add parameters of individual resource or a DM that summarizes or AVG groups of resources. And as above, the delay is configurable, along with the other graph widgets.

  5. it's part of Q4 - you can sumN or avgN up to any number of resources with a SM, then discovers that SM in the widget of data distribution. When I said container, I mean an application, group resource pool... all that acts as a container parent within the vCOps.

  6. that's correct, SMs calc using data collected last points... aka single period of time. When you are referring to the longest period, I gave you a few examples of the attributes that are composed of several periods of time which are calculated and created by the adapter for VMware vCenter behvaior. In this case, you have the GVA 15 min CPU 1.5; These specific simple mobile GVA can be specific OR a copy using SMs. Next, you will have the chance is to find a way to distribute what you need through a widget [at that time].

  7. the distribution of data is not for export, it is for Visual functions. If you want the data in CSV, just use a typical chart of metrics and export to a csv and calc your own pics, avg, 95th, whatever.

  8. This is a bit of a mix of all your questions, put in place.

  You are right, if you added those 3 VMs, then calc was the 95th of the AVG. Like Q7, you would not export the data of the distribution of data because the raw data points are not - you do not pass the metric to a metric graphics standard and export via csv.

  Take advantage of...

• Graph XY on the custom user Interface

  Hello.  I'm kinda stuck (or really stuck ).  In any case, I'm newbie.  That being said, I've had a few really good help on how to pass table through the postuimessage (xparamdata) of teststand to my user interface customized a few weeks ago.  It really helped.  Thanks again.  However, I'm still another question.  I'm moving a container of teststand.  The container or the cluster of table and table x of y in a XY Chart.  I pass to my custom IO and try to update a chart XY on my IO.  I tried to use the same code that I used for a table, but it does not work... of course.  I just need a little help to find out how to get this update on my graph XY on my IO.  The attached photo, this is what I have so far, but it is not close to work.  Can someone give me some advice?

  String of BTW - looking for you wouldn't array1 and array2.  It would be the names of the tables in your cluster.  In TestStand search strings are the relative path to the object of the referenced property.  In this case your container is referenced from which is the name of your berries.

  Hope that makes sense.

• creating the table in the custom user interface

  Hello

  I am trying to create a table of revenue as part of my custom in VBAI user interface. I have attached a code example of the with few variables. I wonder if there is a way to do the same thing without VBAI throw an exception that it cannot have dependencies. Please throw your entries.

  Thank you.

  I have attached a few changes 2 Untitled. VI (updated the connector pane) and custom UI VI and a simple inspection (be sure to check the status of cleanup to see how ref VI is closed). I hope this helps.

• No data when using custom as a widget in the custom user interface relationship.

  Hello

  VCOps 5.7.2 is the version we accounts. We use "personal relationship" as a widget to monitor specific resources. But all resource objects are in a State of unkonwn after configuration and selecting the type of resource. It's a little strange because the same resource objects are OK in relationship VC widget. Is there something wrong in the configuration? Thank you!

  The result is displayed as below.

  

  Xin

  You see "?" State of resources because you have not configured entirely this widget. You have added ResourceKinds as a third party, but you still have to select the parameters that will be used for the 'Workload' category or metric. The needs of each level to be selected, and then select "change metric Mapping ', then select a metric for the"Workload"category and assign limits yellow, orange, red. Remember, it is a custom widget so that you can put "ANY" metric to display for the ResourceKind you are editing.

• Dash for the CPU and memory in the custom user interface

  I need a custom dashboard,

  where I will get all the vm in widget and when I select a vm on the widget side it should show % CPU, % memory usage or a latency of disk all in one metric graph.

  Can someone help me?

  Of course, you need to do is to create a resource interaction file, and then assign this file to a Sparkline widget or graphic metric. Interactions will be "selected resources" widget list VM for the reception of graphic style widget. See the information here:

  Re: interaction between widget and widget graphic metric detail application

• Add the custom user field / Module URL + 1 case report

  Hello

  I'm trying to get this BC online form to work.

  I have a content module support and this is a request for information form which can be seen here

  http://www.eco-cabins.com.au/information-request?cabin=1%20Room%20with%20No%20Bath % 20Quee % 20Bed % 20and % 20Queen % 20Bunker % 20Bed n

  As you can see, the {module_url, cabin} works well 1 room without bathroom, Queen bed and one bed Queen Size Bunker

  on the page but is not his way to the record of the case.

  This is the HTML code: http://pastebin.com/HVmRNpNm

  When someone enters a case the cabin field ends up being empty as you can see in the following image. I would like to display what they are on the page. For example: 1 room with no bath, Queen bed and a Queen-size Bunker bed

  

  Essentially, I would like to identify what page they are on to identify what cabin they are curious.

  Any help would be appreciated. I had a look to the tutorials and videos but still questions. Thank you

  Thank you, the information is displayed in the case... However,.

  It appears on the page of people with a request for information:

  That's what I used:

  Too bad. I fixed it with

  {module_url, cabin}

• When I right click on the list box column Multi that I should get the custom options

  Hi all

  In my application, I want to display the custom user menu when it right-click on the Multi column list box. I want to know is - it possible to do like this. Please can someone help me on this?

  

  in abow picture I get "reset default value, cut, copy the data, past data" so I need to set other options.

  Kind regards

  Santhosh M

  Hi santosh,.

  This one is much better.

• Organization of dashboards in the custom UI

  Does anyone know how to customize the dashboard menu in the custom user interface?  We have 14 sites that have custom dashboards and in order to organize the dashboards customized by site, we would like to be able to move any dashboard for a particular site in a container of site name.  The attached picture shows the builtin classes and what we want to do is to create our own categories.
  

  Suggestions?

  Thank you

  Mark

  Name ' folder_name/dashboard_name' dashboards when you "edit a dashboard.

  The ' / ' create the folder using the string to the left of that character.

• Error 503 in a custom user interface

  Hello

  I have VAPP OPs 5.0.1. After watching emailFilter.xml and quiting this file. I can not connect to the custom user interface with any problem with vsphere UI. WHY?

  error:

  The web server is not available. You will be re-directed when the service is available.

  Are you sure that you do not corrupt the file? A defective xml file can take down the custom user interface. If you have no change tried to replace it with the backup file created before editing it?

  Have you tried to restart the server via the admin INTERFACE?

• custom user interface

  I read custom UI get startted it was hard but good

  You have to be an expert in the custom user interface suggestions (video tuterial or...).

  Hello

  The custome UI that's exactly... CUSTOM :-)

  You must first understand what information you need. For example, if you need to view the LUNS read latency: Lun who have high latency in my environment : http://www.virtualclouds.co.za/?p=163

  It is not difficult to learn... He must know what data you want to view and their little creativity.

• HotSync Manager does not have the Show user profile which is in Palm Desktop - badly conducted.

  I am running Palm Desktop 4.1.4 on my laptop XP Home Edition SP3

  I found that when I hotsynced many my Palm brand programs have not been not sync.

  Looking at my Palm Desktop, I found the users 'user' and a user profile. The user has no data inside (no contact etc..) Profile has my contacts and calendar etc.

  By selecting 'custom' hotsync manager is initially a field empty user with lines listed below.

  By clicking the user field concludes that 'user' but not the user profile that displays in Palm Desktop.

  In addition, the lines show items that have been uninstalled from the E2, six months ago.

  In Palm Desktop, if I select the 'user' tab up hotsync user allows a selection of "Custom" and "File Link". Slideshows custom the same incorrect lines as the custom in Hotsync manager.

  If I select the profile of the user on the ground "Custom" and file link are whitewashed and don't allow selection.

  When I hotsync my Palm applications to my my Palm desktop user profile backs up.

  I uninstalled my office palm of the laptop and reinstalled but it keeps picking up the same bad ducts and does not pick up the user's profile.

  I went to Vista laptop that I have access to and what he was able to successfully back up but I need what he is saved on my XP laptop.

  Looks like you need to do a clean tear and a relocation of the desktop on the XP machine. Uninstall the software and remove the PalmOne under Program Files folder. Then reinstall.

  Message relates to: None

• CC Desktop App for the Government concerning: the end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  Desktop adobe Creative Cloud for government applications :end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  1. They will be able to download and activate the installation package through CC e package on Internet workstation and transfer with a USB flash drive on a workstation Intranet , hence they can deploy desktop applications to end-user desktops CC?
  2. The deployment of renewal process will work the same as above?

  Government accounts https://forums.adobe.com/thread/1483694 can help

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  or

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  Creator of Enterprise Cloud https://forums.adobe.com/thread/1489872 License Restrictions