lost wireless certificate and get more slower

Similar Questions

• Satellite U200 getting more slower and slower - 5 minutes to stop

  My U200 becomes slower and slower - 5 minutes to stop! and now it crashes when I try to install the drivers for "Cakewalk Sonar THE"- so I need help.

  I think I need to re - install Windows XP, however, I only got a "recovery disc" with the laptop - which will reformat my hard drive - there no way to reinstall xp without reformatting?

  If I have to reformat-how can I recover my Express Media Player & Norton Protection? -(I bought the laptop in January this year)

  HM, I think that you won´t get around this recovery thing, because I think your system may be heavy software problems.

  Regarding the Media Player and Norton: were they not installed as you bought this machine?

  Welcome them

• Satellite L450D-13 x - lost wireless connection and will not sign up to all the

  I have a Satellite L450D - 13 X, I was able to use the wireless until today where it has stopped working. No matter what I do, it says that the wireless device is disabled.
  I tried to update and diagnoses, but they all come back fine.

  Can anyone help?

  Try to restore OS to an earlier time using System Restore tool. Maybe some update Microsoft screwed up the WLAN functionality. Very often the driver WLAN is displayed as an option to update.

  Try this as the first step.
  Also try restarting your router.

• C309 - no bars at all (lost wireless communication).

  Hello.  I have a c309g-m, and it works fine without thread for some time.  Now, all of a sudden the wireless function stopped working.  It shows no bars on the interface of the printer and can not find any wireless router.

  In my apartment's wireless router works fine.  I have reset the setting on the default printer, and then after that who does nothing, I set the default printer wireless (no dice).  Depending on the printer, the wireless Radio is on.  I unplugged and left over night, plugged it again and no luck.  When I use the wireless configuration wizard, it seeks and research and now can't find anything.  In the past he would not only find my network, but some of my neighbors also.

  Anyone got any ideas how I can fix this problem?

  Thank you

  Steve

  Unless its under warranty is not worth fixing.  You'd spend more than buying a new printer.  The Ethernet port is useful in this respect (likely).  You could just plug it into the back of the wireless router and get the same functionality that the wireless.

• Messenger is side - by side, configuration error I lost my video and audio, still have the Shatt... Help, please

  I lost audio Messenger and chatt, more than a month it is said, is side by side configuration, is wrong.please help me... * address email is removed from the privacy *.

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Create the certificate and Code signing

  Hi all

  I'm still a little confused on the operation of the certificate and the sign Code.

  First I used Flash Builder Burrito to create my certificate and I choose my file syc. After that, I got an email from RIM saying that my registration has been completed. After that, I realized that the certificate I created has a different name than I used to ask my sign code. When I created a new graduate with the right name, I could associate the core sign in my new certificate and get this error

  

  When I tried to sign my application via command line, I've got it successfully: "Bar signed."

  Does anyone know why I get this error message, and if the command line worked really. can I use different certificate with a sign code?

  Thank you very much

  Hey arthur,.

  the rule is that if you mess up the record in some way, it is best to ask a new set of signature keys. You can not reinstated a key already registered. also, I saw that you use Flash Builder to make the entry to the registry. Although I've seen this work, I recommend that do the actual packing and signature via command line. Good luck!

• After that I did Disk Defragmenter to C I lost my files and setting up wireless for my windows

  After I did Disk Defragmenter to C I lost some information and files for my windows then my wireless does not detect all wireless networks its lost all the operating parameters of my adapter wireless (Atheros AR5005G Wireless Network Adapter) I need to get files and setting of cos its all lost and I couldn't update my antivirus (Microsoft Security Essentials) 0 x 80240022

  Hi jtm 8888.

  Try these methods in the order shown:

  Method 1: As a first step, update the network adapter driver by visiting the manufacturer's Web site.

  You can also follow this step to do the same thing:

  a. right click on my computer, click Manage, then Device Manager.

  b. double-click the type of device you want to update or change.

  c. right click on the device driver specific, you want to update or change.

  d. click set to update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  For more information, see:

  How to manage devices in Windows XP

  Method 2: Follow the steps listed in this article and check if this may help you:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Note: The steps listed in this article are applicable to the other version of Windows XP as well service packs.

  Method 3: For problems with Microsoft Security Essentials, see:

  http://www.Microsoft.com/en-us/security_essentials/support/cf5220bd-3da8-4694-ac42-f5396ef5ff0b.aspx

• Need the latest news of the wireless card and more on my Satellite 1905-S301

  First post here. Need help.

  Toshiba has no info in their manual or anywhere on their site I could find about it.

  The manual mentions that the stock for my Toshiba Orinoco Gold 1905-S301 wireless card (8484415560) wireless adapter.

  Thing, is that the map is years old, and I want to know what the last card that will work with my 1905-s301. I saw many posts around the net
  people with problems with mini-pci in Toshiba laptops different cards, where the power light and wireless do not work, and many positions
  on workaround with pin 13 on the map so that the thing stays on permanently.

  So what I want to know is: what is the latest version of the wireless standard that works with my 1905-S301 (802. 11 g, 802.11n, whatever), what brand of card
  I can't (model number would be useful) that works, and it should be a map where I don't have to do no work around... where the on/off switch works the way it's supposed to and seeing Wi - Fi will also do.

  Now... Apart from the above, it would be preferable to use a Type II CardBus PC card for the slot on the side of my laptop. Again, I am ignorance about these cards, but I don't know that you can get wireless cards that can be used. It would be preferable to an internal card? I know that they went to the PC Card Express format a few years before, so I can't assume CardBus cards cannot be purchased new.

  Basically, I just want the ability to the most recent and WiFi for my laptop. I am to go to Seattle in May and want to have my computer laptop maxed out as far as it's capacity so I can entertain me

  A few other questions:
  Is my Wired CPU? Can I spend it? And same for my graphics card. 16 MB graphic memory is not good, and I would like to know if I can pass that somehow.

  Thanks in advance. Any info on my questions above would be much appreciated.

  Hello!

  I agree with Garrett, contact the ASP in your country for information. They know what are the cards will fit in on Satellite 1905 and work.

  On WiFi standards, I can say that the newer 802.11n standard will not work in this good old classic because that's why you need 3 antenna cables.

  The CPU can be improved, but this will be maybe not supported from the BIOS. On the site of Toshiba is a document available thereon:
  http://195.182.196.33/KB0/FAQ7A01ZW0007R01.htm

  Finally and above all the video RAM depends on the RAM memory and is turned on automatically. I don't know but if you have more RAM you will also get more video RAM but this ask your ASP too m.

  Good bye

• PC is slow and get the message insufficient disk space

  my PC is slow and I get a continious pop up indicating "you run low disk space on the local disk C:.

  What should I do?

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 5 and 10 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• II had built my pc cleaned he lost my webcam and I can't connect wirelessly I'm curent

  I paid to have my computer cleaned and lost my webcam and I can't connect wirelessly

  Hello

  Why don't take you back to where you guessed it 'fixed '?

  If you have a wireless network, switch power switch make sure it is turned on

  and make sure you have the latest vista drivers/software for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  Is the same for your webcam a cam laptop builtin or external webcam: manufacturer of the laptop or the webcam manufacturer's website and search for Vista drivers and software

• Certificates and Unified Wireless

  Hi people,

  I am currently deploy a unified wireless network and that you have run into a bit of a problem with certificates - unfortunately they aren't my specialist subject!

  We will deploy two wireless networks (comments and Corp comments) will be tunnel to a dedicated WLC and Corp. will REAP: break-out to the local network with authentication PEAP against AD (via Cisco ACS).  We will have 7 WLCs (including anchor comments) that will be managed by the WCS.

  The problems I face with certificates, it's that I don't know how and where to place them - it is my understanding:

  cert 1 x GBA for AD authentication

  1 cert of x on the WCS for the connection of the Web page (to stop the alert cert)

  1 x mobility anchor cert (to stop the alert cert for guest access)

  I guess that since the other WLC will not be recorded on they do not need a cert that everything will be done through WCS and comments "web-auth" page is served rather than the WLC mobility anchor central 6?

  Ideally, we don't want warnings cert to appear as that will generate the number of calls from users, only for us to tell them "just click ok and it'll be fine"

  I'm trying to know if we have a certification authority internal, can I use to get certificates for the WCS and ACS that will sort the internal clients, then an 'external' for guests cert.

  Worst case, we would need to get the 'external' certs for all three, but I'm confused as to how it works as our internal domain is a 'private' name [example.private] rather than a public .com [example.com]

  Any guideance you can give to would be great!

  Thanks in advance

  KeV

  Well, if you have a domestic certification authority and it is in the store root approved devices, you won't this certificate error message.  If you go with a 3rd party certificate, then you can go the road that you have:

  cert 1 x GBA for AD authentication

  1 cert of x on the WCS for the connection of the Web page (to stop the alert cert)

  1 x mobility anchor cert (to stop the alert cert for guest access)

  Or if you want less of certificates, you can do this:

  1 cert x the GBA for AD authentication and mobility anchor (to stop the alert cert for guest access)

  1 cert of x on the WCS for the connection of the Web page (to stop the alert cert)

  Just use a name CN which is general... like wifi.private or something like that.

  Scott

• Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any?

  Me and my dad is from the same Apple ID and I want to set up his own, but how it will get all his contacts, photos etc from my Apple ID? Or he will lose all? or I could keep them saved for him and send more via an application any? I don't know how to resolve this issue, if someone could point me in the right direction.

  Have him create a id Apple here- create and start using a Apple - Apple Support ID, and then both you can create an album-photo sharing Photo Sharing - Apple Support iCloud

• I lost my iPhone6 and I don't know who stole, how can I get it back?

  I lost my iPhone6 and I don't know who stole, how can I get it back?

  See this Apple Support Article

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• I get threatening and abusive emails to a windows live user, how can I get more information about this user to report.

  e-mails in danger

  I get threatening and abusive emails to a windows live user, how can I get more information about this user to report.

  The information is provided in the source of the message. In OE, Windows Mail and WLMail, Ctrl + F3 reveals this.