The data record of the simple keyframe as a "Preset"?

Similar Questions

• How to read the heart rate data recorded by the Apple Watch?

  My wife wears a Apple Watch and suffer from power cuts irregulars. After the last of them, I checked the data through the health app and saw that at the time of the blackout, there seems to be no saved data. A range of heart rate was recorded both before and after the blackout. Can someone explain how the data record? Thank you

  MIchael Gilmore

  This explains the various triggers causing the heart rate measure:

  Measure your heart rate with your Apple Watch - Apple Support

  Here is some additional information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Download the data recorder of NOR

  How can I download the data recorder of NOR?

  It depends on what OS you are using and what data logger you talk.  Do you mean Signal Express or the data recorder included with the NOR-DAQmx Base driver?

  Signal Express for Windows

  NOR-DAQmx Base for Mac OS X, Windowsor Linux (Mandriva, OpenSUSE, Red Hat WS 4 or 5 only).

• need the simple way to set the computer back to factory settings, and already saved safe data

  need the simple way to set the computer back to factory settings, and already saved safe data

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Error: Members similarly on the data recording in double size

  Hello
  
  When loading in the cube, I get an error staing
  "Members of the same size on the data record"
  
  But I don't see duplicates in the master table or in the dimension tables.
  
  How can we find these duplicates?
  
  Thanks in advance.
  
  -Shema

  Hello
  See this response from John Goodwin:

  https://KR.forums.Oracle.com/forums/thread.jspa?threadID=2264153

  See you soon

• How to save a calendar I created with the photo and the dates recorded on separate pages?

  How to save a calendar I created in photoshop with the photo and the dates recorded in the form of two separate pages?  When I save in pdf or jpeg, they are automatically save 1 pg with dates and photos on a single page.  This is causing problems when I print.

  Hi there, in which case your printer is not very large, you can also trim down the two versions and print them as separate documents.

  (1) create a guide where you want to split the pages by clicking on the rule (hit control R if they are not displayed) and dragging to the desired location.

  Create the Guide to make it so be precise in the way which divide you your page, and so that no part of the image will be repeated or lost.

  

  (2) select the Cropping tool and adjust the area of culture at half top of your agenda, using the guide you have just made to align with the right place. Press return to complete the harvest.

  

  (3) go in file > save as the. Name the file something like calendar_top and select the desired file format. Press "Save".

  

  (4) once you return to your calendar file, go to the history Panel and select 'Guide to flirting This will bring you to step before you cropped the image.

  

  

  (5) repeat the steps as before to the bottom half of the schedule, once more, using the guide to help you make your growing area.

  

  

  

  Then you would just print each of the two pages individually. The images does not appear in a single document, but if you have Acrobat you could combine the files.

  I hope this helps!

• Governor limit exceeded in the generation of cube (data records Maximum exceeded)

  Hello
  
  I have a PivotTable that contains about 30 measures and the lines are also measures. The columns are the last 12 months, I get the following error when you try to view the results:
  
  Governor limit exceeded in the generation of cube (data records Maximum exceeded).
  Error details
  Error codes: QBVC92JY
  
  
  I checked view pivot instanceconfig.xml and these settings are set to higher values:
  
  < CubeMaxRecords > 100000 < / CubeMaxRecords >
  < CubeMaxPopulatedCells > 100000 < / CubeMaxPopulatedCells >
  < PivotView >
  < MaxVisibleColumns > 5000 < / MaxVisibleColumns >
  < MaxVisiblePages > 5000 < / MaxVisiblePages >
  < MaxVisibleRows > 100000 < / MaxVisibleRows >
  < MaxVisibleSections > 5000 < / MaxVisibleSections >
  < / PivotView >
  
  I do not know why this error pops up as the set of data is not large, there are 30 rows and 12 columns.
  
  I followed http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
  
  Can anyone help?
  
  Thank you

  Hello

  Increase the size of CubeMaxRecords and CubeMaxPopulatedCells and check it out.

  600000
  600000

  See you soon,.
  Aravind

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• All of my icon are icons of java. When I click, a back short style window appears, then disappears. I can not open files or links. What is the simple solution?

  All of my icon are icons of java.  When I click, a back short style window appears, then disappears. I can not open files or links. What is the simple solution? This CHANGE occurred on 15 July.

  The simple solution is:

  1. type the word restore in your Start menu.  Some options will appear.  Choose to restore the system and settings files
  2 - Click Next, choose July 14 (or a date before the problem occurred), and then click Next again.  Your system will restart with repaired parameters.
  Let us know if it works for you.

• Use the Simple Contact form

  How can I access the comments sent in the «simple contact form» I get an email which reads:

  "Contact us" has a new form submission. Automated email http://www.edmundrice.org

  {_formsummary tag}

  Privacy Adobe Business Catalyst® is committed to protecting your privacy. You have received this email because you are a user of the Adobe Business Catalyst® system. If you want to stop receiving this e-mail please contact your system administrator. Adobe business Catalyst 2004-2015, all rights reserved® ©

  I guess that this should have a summary form. The tag does not work.

  If I click on the small cross (above the tag) I get a Web page:

  http://cbop2.BusinessCatalyst.com/utilities/BCToolboxPanel.aspx?ObjectID=18 & ObjectType = 200 01 & Tabs = 6

  who has a 'DATA' section and a message "no data available for this page.

  Can someone tell me what I am doing wrong?

  Form summary includes the form field values that the user has submitted through front end, it should work properly.

  Please let me know if you are still having the same problem.

  Thank you

  Sanjit

• Why the simple task of transferring photos that should be done drag and drop such a hassle from my phone to the computer

  Why the simple task of transferring photos that should be done drag and drop from my phone to computer such a chore... It is a success or a failure... open iphotos sometimes sometimes it doesn't.

  < published by host >

  Drag and drop is not supported from iPhone to computer.

  Sync with iTunes or iCloud > keep your photos safely stored and updated on all your devices - Apple Support

• I need the simple installation mode of firefox 5.0 on my eeepc 900 (default Xandros Linux) - I used to install 3.0, but is now obsolete

  the ed-meister has provided an excellent simple mode for the installation of version 3.0 of firefox and I did it correctly, but then when I looked at the edits, he said that I need to upgrade to firefox 5.0 and I need the simple mode for linux and I don't know what to type in the terminal/console

  Thanks for your help if necessary

  Check with the EeeUser forum to see what they have to say.
  
  http://Forum.EeeUser.com/

  I don't see Installing a browser 2011 in a 2007 operating system. I replaced Xandros with Easy Peasy 1.6 some time ago, 3.0 and 3.5 were too darn slow on Xandros even with the GTK update. A 900MHx processor will never be a speed demon, but you I have to give him a chance with a better than Xandros OS.
  Personally, I stay with 3.6.x until the end of the support. I don't see the need to upgrade to the latest version of Firefox now, especially on Linux.
  
  http://www.geteasypeasy.com/

• I can't open the simple attachments such as MS Word documents.

  I can't open the simple attachments such as MS Word documents. I use Yahoo to access my mail.

  This has happened

  Each time Firefox opened

  == Today, may 4, is the first time that I noticed it

  problem started there about 2 months-only can not open attachments doc, need help.

• I have a new MacBook Pro 13 "." When you click on almost ANYTHING, I get a drop-down menu, rather than the simple task. This includes a link to closing a window, writing a message of openness. Whatever it is. I've updated to 10.11.2.

  I have a new MacBook Pro 13 "." When you click on almost ANYTHING, I get a drop-down menu, rather than the simple task. This includes a link to closing a window, writing a message of openness. Nothing, including the drafting of this issue. A screenshot is included. I've updated to 10.11.2.

  Thank you!

  Bill Koechling

  

  Is it possible that you accidentally tap the touchpad with 2 fingers?

  Try to go to the preferences system-> Trackpad-> point & click and disable the "Secondary click" item Or change one option other than water from the tap 2 fingers.

• The simple question is "where can I find the installer for the HP Quick start?

  The simple question is "where can I find the installer for the HP Quick start?

  BESR regards

  Hello:

  And here's one for W8...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140915_1#tab1