The DB issue patch of the CARS from 10201 to 10205

Similar Questions

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Here you will find a way how to activate your iPad If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports

• Transfer contacts from the car using RAZR

  When I start my car bluetooth find my phone (Droid RAZR), but does not transfer the contacts, or calls received and sent. My old phone is a HTC ERIS and all information transferred automatically. When making calls from the car, it's annoying if I always manage the phone to find someone. Any help is appreciated.

  My car (sync) give me options... Is yours have a menu to do this?

• Vista will not start after update 12/9 - a patch prevents the system from starting.

  My computer has downloaded an automatic update on 09/12/09.  It restarted while I was at work, and when I got home he had just ran a startup repair function which could not solve the problem.  I tried to run the rapair again and it failed.  I tried to do a system restore on the eve of the update, but the operating system could not start again, and I was sent automatically the Startup Repair tool.

  When I look at the diagnostics, the message says "a patch prevents the system from starting.  I have no idea how to solve this problem.  Can someone please?

  PCrepair101,
  You try to use the package manager I link a few post above?  Otherwise, demarrer start from your DVD, type command prompt, and then follow the steps in method 2.  http://support.Microsoft.com/kb/940410
  If this does not fix it you can rename the pending.xml file and restart.  To do this, boot from the DVD and enter the command line.  Then type:
  CD windows\winsxs - press on enter
  Ren pending.xml pending.old - press on enter

  Then restart the system.

  You said "when I try to do a system restore, it is said that there is no previous restore point" and I was wondering if you have tried a "Startup Repair" not a system restore.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got a phone call from a person claiming to be from the care team of the windows service how they got my number

  I got a phone call from a person claiming to be from the care team of the windows service how they got my number and I took his number, I think it's fake

  Hello

  There are telephone directories, etc., etc.

  It's a SCAM

  they want or money on your part for programs without value or make an identity theft on you to get even more money and get your internet banking passwords and credit card information, you get allows you to download the software to 'fix' or 'test' for your computer

  read this:

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  Microsoft has none of the unsolicited telephone calls to help you fix your computer

  In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.

  Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.

  Treat all unsolicited sceptically telephone calls. Don't provide personal information.

  If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.

  If you think you might be a victim of fraud, you can report it. For more information, see: what to do if you think you have been scammed.

• CD burned from the computer will not playback in the car

  original title: burning music

  After burning to a CD, they will play back computer and DAB radio/CD, but not more hardware and cars.

  Is this because the CD player is reading in MP3 format? What should I do to the car

  Thank you

  Older models can't read CD - R or CD - RW. You will need to check the documentation that came with them to verify this.

  If a new unit is supposed to play a CD burned, but he can't, so its usually because the CD no was NOT finalized (i.e. burned as a multisession - you just need to finalize it) or burned at very high speed. (You should always burn at the advertised speed of at least your burning half: IE if it can manage 48 x then burn at 24 x max personally I always burn at 12 x, slow but you get a good picture on the CD).

  On the other hand, if you burned as a data (mp3) disc then the most modern of the stereo and car players are capable of reading this format, but more its not. Again, check the docs. According to the music CD from above, if your player is mp3 capable, but can not read the CD, make sure that the CD has said has been finalized or burned at low speed.

  About your car, once again reading the manual. If it can read mp3, then burn them on a CD in the form of data (no music), low speed andf make sure finalize you the CD.

  The best piece of software and flexible to use in my humble OPINION, is CDBurnerXP (Google it). as against WMP (which is very basic). It also asks you before burning if you want to finalize the CD or make a "multisession."

  See you soon,.

  Jerry

• Impossible for cars from Need for Speed after updating the graphics driver.

  I recently updated my drivers intel HD graphics 4000 on my laptop Samsung windows 8. Everything works fine with the updated drivers, but there is a specific problem with it. As I updated my graphics drivers, I ran "need for speed \u200b\u200bHot pursuit 2010". He started very well, but controlling the cars in the game looks very different he was with previous drivers. It becomes difficult to control the car in the game. When I deleted the drivers and represented the game, the game ran everything as he ran with the graphics drivers updated but the difference was that control the car in the game back to normal.

  Only thing drivers assigned to day seemed to be control of the car in the game need for speed pursuit 2010 \u200b\u200bHot. I have other car games as well and they work perfectly well with the updated drivers.

  Any ideas what is causing this issue?

  Original title: problem with update graphics drivers

  I contacted Samsung and they provided the solution. Problem is now solved.

• timing issue with cruzer blade SCDZ50 - 008G: cannot move all the files from the PC to the USB

  I accidentally deleted this file synchronization that was in the main folder of the USB. now I can't move all the files from the computer to the cruzer blade. I can't find where to download it online. Help, please!

  Too bad. found this

• No sound from the Clip when it is connected to the car charger and car s in the

  I just got a car charger for my 8 GB Clip. I have the Clip connected to the connector of the car aux in, and it plays beautifully this way.

  However, when I connect the car charger, which is a fact by Motorola for a mobile phone, the sound of the Clip completely stops.  There is no sound at all.

  Even if I barely touch the metal of the car charger USB plug to the USB port of the clamp, the sound cuts.

  A ground loop isolator would correct this problem? The comments that I have read of these say all that they helped with motor and alternator noise, but I don't have that.  I have no sound at all, even if the Clip is loaded and he continues to play according to the display of the item.

  I checked the car charger works well because I have a box of jump with a record of 12 VDC (just like in the car).  The cool Clip and plays with a helmet with the Motorola car charger in this configuration very well.

  Any ideas what is wrong and how to fix it?

  Thanks in advance.

  Just for this follow-up, the ground loop isolator completely fixed the problem I had with the sound cutting on my video in the car.

  The one I chose was the PAC SNI-1/3.5 RCA noise filter.  He goes online with 3.5 mm cable to the and has a socket on one end and a plug on the other.  It would have been cool if he had just had two male connectors, because then I could have plugged one side in the Clip and the other in the input of the car Jack.

  There is no significant deterioration in the sound, and now I can load the Clip while listening.

• Media Player, I moved all the music files from drive C to drive D, both at the Court, due to the car being filled C... How direct the player to find the new path?

  I have a laptop HP with two drives.  The C drive is intended to the BONE, with the D drive, intended to manage file storage.  I didn't know that the music files were originally instructions in the C drive, which is now virtually full.  I copied all the files of music, (both for drive D, but as a backup to external hard drive)... now, I need to know how to redirect the media player to be able to read the files from the disc... Please help me?

  Open Media Player, click file on the Menu, click Open.

  Using the folder display left side cover on your D drive, find your playlist or music file.

  Click your playlist or music file, and then click Open.

• I have managed to remove the LR5 from my computer and cannot find a way to recharge.  I have set up (24 issues)

  Hello

  I managed to remove the LR5 from my computer, im not sure how I can recharge it.  I have the code number 24.  Hopethat someone can point me in the right direction.  Thanks Richard

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• cannot eject the dvd from studio 1737

  cannot eject the dvd from studio 1737 laptop

  Hello

  If they don't help then check with the manufacturer of system and/or car manufacturer
  Support, their documentation online and drivers and ask questions in the forums (if any) on
  known issues.

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can
  wand, a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  -----------------------------------------------------------------------

  You can probably find more info here with a CD/DVD-related hardware problems.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't install the SP3 from Microsoft Update Center

  I can't install the SP3 from Microsoft Update Center.So I contacted Microsoft Support and ran diagnostic scan tool and sent the results. They send e-mail attachment reset_subinacle. It's done. FAILED. I tried 3 times and 2 days later... still cannot copy beethov9.wma. file. So now what should I do to get this SP3 on my son's computer? My son has enough disk space for SP3 and I made sure and prepared for this installation. Does anyone know what I need to do? Help!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  jneen420

  Yes, I'm familiar with your recent discussions on this particular computer as well as the fact that he gave to your son as a used computer. Be so familiar with the history of this computer, I feel confident in saying he was already infected when he gave your son.

  I fear that the only way to get this computer secure and fully patched to Windows Update will be formatting the hard drive - and then do a clean install of Windows.

  Since you don't have the disks that originally came with the computer (and assuming that the original owner would have given them to you when gave you the computer if there were), we must assume (or at least to cross our fingers and hope) that there is a hidden restore partition that could be used to return the computer to the condition it was before first it left the factory. I can assure you that can support Dell & will help you, if not directly through the Dell Community forum:http://en.community.dell.com/support-forums/desktop/f/3514.aspx

  Follow the instructions below:

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care ofeverything on the next page before otherwise connect the machine to the internet or one local network (i.e. other computers) and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need extra help (in addition to that provided in the Dell forum), please start a new thread in this forum MS:http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility. Expect to pay about $150 USD (or more) for this service.

  [Yes, times are tight for all of us right now. [You might find a computer local club or a technical school that could do this work for you free of charge.]

  Wish I had better news for you, Jeannine. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft