Pavilion P7 1020 impossible to find two USB ports at the front as described in the master product.

Similar Questions

• HP Pavilion 15-n259TX (two Usb ports on the left does not work)

  I recently lowered the windows note 8 for windows 7 and found that the two usb ports on the left side of my laptop no longer works, that is, they do not detect anything, be pendrives or external hard drive. Can you help me fixed the problem?
  My laptop is HP Pavilion n259TX 15.

  Hello

  Install the driver usb 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64965.exe

  Kind regards

  DP - K

• M40X-129: the two usb ports on the right does not work

  Hello people.

  Two days ago, I bought a satellite m40x-129. I wanted to use a usb mouse and a drive hard usb so I had to plug the device into a a usbport on the right side of the laptop, but is does not work.
  even after reinstalling with windows xp pro (I need to connect to a primary domain controller) has not changed. I installed all the drivers of the tool-cd burned by a toshiba tool in the original installation.
  Maybe it's a hardware fault. someone else has the same problem?

  Thanks, jens

  today I updated my drivers for the new 7 series chipset from intel, but the usb ports on the right still have no power and do not recognize any device.
  I'll ge see my local dealer Monday ;)

• MAX cannot find two usb cameras at the same time

  Hello

  I want to use two cameras usb (Thorlabs DCC 1545 M) in NOR-IMAQdx in Labview, but it cannot find a single camera (the one plugged earlier), and also a single camera is shown in MAX. Both cameras working in the manufacturer's software, and if I unplug the 1 unit, the 2nd will be displayed in MAX after a refresh.

  I found that one camera is supported for each USB hub in Labview, and all USB ports in this computer correspond to a same hub online. I don't know if this is causing the problem.

  In fact, I need to take the picture in both cameras at the same time, a switch programmed between the two cameras will work for me.

  Any suggestion and comment will be appreciated.

  Hello Hosni,

  According to this link, you can acquire from multiple USB cameras simultaneously.  The limitation is on the manufacturer and how they interface with the bus of DirectShow.  When you use two cameras of the same make and model, it sometimes happens that not enough information is not IMAQdx to distinguish between the two cameras.  When you switch to MAX cameras, they come as different cameras, or they appear actually virtually the same?

  Since you said switching between them might work, I found an example that does just that.  Just make sure you give a name to each camera single camera.  I hope this will be useful for you.

  In addition, there is a bit of discussion on this topic on the forum of discussion already.  Check out these related threads, or use the search box to search for more.  There is much information available!

  http://forums.NI.com/T5/LabVIEW/multiple-USB-cameras-in-LabVIEW/m-p/833517

  http://forums.NI.com/T5/machine-vision/two-USB-camera-identification/m-p/2193960

  http://forums.NI.com/T5/machine-vision/synchronized-capture-for-multiple-USB-cameras/TD-p/1879647

  http://forums.NI.com/T5/LabVIEW/multiple-USB-camera-image-acquisition-using-vision-acquisition/TD-p/...

• Satellite A500 - 14L cannot recognize two USB ports

  Hello

  I bought a Satellite A500 - 14L three months ago, I've just updated the bios with this link , but after two USB ports (on the left side of the computer) do not work.

  I try to download the new driver for them, but without success.
  Do anyone now how can I solve this problem?

  Thank you and sorry for the English, I'm French...

  Hello

  What operating system do you use?
  Is - this Windows 7?

  How about USB port State in the Device Manager?
  Is there visible yellow exclamation points?

  In your case I would recommend to check if all the necessary drivers have been installed.
  For example the Chipset Utility must be installed. It is very important.
  There is also the USB Sleep and Charge utility USB Sleep and Charge utility. This utility is able to activate or disable the USB Sleep function and fresh. It shows the positions of the USB ports supporting USB Sleep and Charge function and shows the remaining capacity of the battery.

  Please check these applications!

• Suddenly, Dell U2311H monitor two usb ports not working after 4 years

  Hello

  I've had this U2311H monitor for 4 years now, and it is connected to the Dell XPS 8300 desktop.

  The monitor has two USB ports on the left and for some strange reason, than all the two has stopped working recently.

  I did the following:

  1. disconnect the power to the monitor cable, then plug it back in to the monitor.

  2. unplug the upstream connect the USB cable (between the monitor and the desktop) and re.

  3. move the USB upstream on a different USB port on the desktop while the monitor is off.

  Nothing helps. :(

  That I could do to make the USB ports on the monitor work? I lose 2 practical USB ports and kind of desperate.

  Thanks in advance!

  Jason

  If it was me and the U2311H seemed much, I would just get a card 4 ports USB 2.0 Hub and plug it into the XPS 8300.

• Satellite C660 - two USB Ports without function (bad connection)

  Hello, sorry for the worst English.
  Historically, the touchpad of my Satellite C660-220 used without operation, worked with a mouse of radio. Now, two usb ports can only be used under certain conditions. Can I replace the connections for this part (motherboard / motherboard) for example, a computer used toshiba laptop? Where can I read, one of which models the parts required are the same as well?

  Best regards from the Germany

  Bert

  Hi Bert

  I guess for you that it is quite simple. Problem is that this repair is not supported, and all we can try it on its own, including all the risks of damaging something.
  > Where can I read, one of which models the parts required are the same as well?
  This kind of document is not and if it has information that is not for public use, but for only authorized services.

  Theoretically, you can find the same mainboard with damage CPU or GPU and use parts from there.
  Believe me it is not easy to give you some good advice on this subject.
  Out of curiosity, but you have some experience with these things?

• How to take snapshots of two usb camera at the same time

  Hello

  I have a project where I have to take still photos of two usb camera at the same time repeatedly and save the in a particular direcltory. I am received using a camera by using "Camera Grab vi", but I can't make it work with 2 cameras, I use the flat sequence and 2 "Camerra Grab vi: with particular camera in a sequence, but each time when I run the program I get only pic of a camera, its seems a camera dominates the other.»

  Please is it possible to use the two camera simultaneously. Attached are the snapshot of my vi.

  Thank you

  Ankit G

  Looks like you are using the same reference at the same time grabbing the camera. The two camera snaps happen but the second camera clamp is written on the first so it seems alone is slam. Try to run the VI executiong highlighted arbitrary mode (select icon icons four bulb to the right of the button run on the schema). This will allow you to see the data stream. In order to get both of these Snap you'll need separate references. You can try to watch one of our examples in the example Finder OR give you some direction (LabVIEW > help > find examples > Browse tab > Input and Output material > IMAQdx > high level > Snap.vi). You can break the two cameras at the same time if you just copy this code and double of the code.
  (Note: If you change the examples, always save as copy in another location so that you do not save on the packed example)

• 2 USB ports on the left side of my HP pavilion g6 does not

  2 USB ports on the left side of my HP pavilion g6 does not after I formatted my system, it detects all the devices plugged in these two ports, before operating system was family premium from Windows 7, but now he have professional window 7, what can I do?

  Windows 7 64-bit, install:

  Intel USB 3.0 Host Controller Driver

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Pavilion g6: 2 left usb port of the computer hp laptop pavilion g6 does not

  2 left usb port are not work ing after 7 (64 bit) laptops.windows formatting has loaded.two usb ports on left side doesnot answer

  Hello:

  You probably have to install the applicable usb3 driver.

  What is the complete model number or the product number of your computer laptop g6?

  Many products are on the label as well as the serial number.

• HP 8460p left two USB ports do not work.

  Hello

  After a motherboard replacing the left two ports of the laptop don't work. AMT is enabled, DMI is correct, BIOS is the latest UEFI value by default, enabled USB ports in the BIOS. What I was asking, the funktion of the ports support work, but I can't begin with my USB stick or windows diagnosis 7 recognizes this device. (tested with different USBdev.)

  What could I have forgotten?

  THX for the help.

  It seems that if that was the problem. In the next few days, I can verify this.

  Thanks a lot for all indications.

  JP

• What USB port supports the 3 Protocol?

  Hi all, what ports in W520 support USB3?

  There should be 2 x 3 USB ports on the W520. They are blue and should be on the left side of the computer. Should be easy to find if you are looking for the two blue USB ports.

  -gan

• How to set up Time Machine via a HARD drive connected to the USB port on the router?

  Hi all

  I have an Arris Touchstone Data Gateway DG1670A/TW for my internet / wireless which was provided by my ISP.  There is a USB port at the back of the router and I was wondering if I could connect an external HARD drive to save the two Macbook Pro that I have in my house through Time Machine wireless?  If Yes, could someone provide me the details regarding how to set this up properly?

  I too, was thinking about making a 4 TB HARD drive - 2 and wanted to partition so that half of it would work for Time Machine and the other half I would be able to store photos that I take on my digital SLR and are in Lightroom.  Could this be a problem at all? I partition? or Time Machine just to use the available space and delete older backups to make room for additional photos?

  Thanks in advance for any help.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

• help that my usb ports on the left side do not work

  I have a hp pavilion dv6-6117dx. the usb ports on the left side are stoped working. I need help please...

  A factory restore can't hurt, and it can fix it. First of all, I think I'll try re-installing the AMD graphics driver which usually includes the motherboard drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98292-1&cc=us&DLC=en&LC=en&OS=4063&product=5177781&sw_lang=