The delay time indicator

Similar Questions

• measurement of the delay time to fall on the rise

  I use the PXI-5124 digitizer and development of codes in C++ to measure the time between the 2 channels.  I put the trigger on channel 0.   I need to measure the delay time of CH0 AMOUNTING to CH1 RISING, CH0 AMOUNTING to CH1 TOMBANT, CH0 FALLING RISING, CH0 TOMBANT to CH1 TOMBANT CH1.

  I encountered the following problems.

  1. when I tried inverted signals using the niScope_AddWaveformProcessing() function, I had to call NISCOPE_VAL_ARRAY_GAIN twice.  Second call with gin = 1.  Otherwise, the waveforms being feteched were not reversed.  This happened to both channels.  Here is the code I use.

  niScope_SetAttributeViReal64(session,"1",NISCOPE_ATTR_MEAS_ARRAY_GAIN,-1));
  niScope_AddWaveformProcessing (session, "1", NISCOPE_VAL_ARRAY_GAIN));
  niScope_SetAttributeViReal64 (session, "1", NISCOPE_ATTR_MEAS_ARRAY_GAIN, 1));
  niScope_AddWaveformProcessing(session,"1",NISCOPE_VAL_ARRAY_GAIN));

  niScope_FetchArrayMeasurement (session, "1", timeout, [channel] NISCOPE_VAL_ARRAY_GAIN, actualRecordLength, wave [channel], & wfmInfoPtr));

  Code that write the [vague] in a control file

  2. even if with above method to obtain a code reversed, I can't get a correct results of CH0 FALLS of CH1 RISING.   In addition, I don't know if the other delays are correct or not.

  Please see the attachment for the functions dgz_measure() and NI_DGZ codes::meas_delaytime();

  Other scalar measures seem ok.  I also tried the FFT, it should be ok too.

  What I've done wrong? Is there any sample code for the delay time?

  I checked the AdvancedMeasurementLibrary already.

  Hi, Jean Louis,.

  It works fine now.  He needs to call niScope_FetchArrayMeasurement after you set the attribute.  There is no need to call niScope_AddwavefromProcessing.  The niScope_FetchArrayMeasurement and niScope_AddwavefromProcessing will be peform the operation.  So if I called two of them, the operation will be twice.    Here is the code that works.

  niScope_SetAttributeViReal64(session,"1",NISCOPE_ATTR_MEAS_ARRAY_GAIN,-1));
  niScope_FetchArrayMeasurement (session, "1", timeout, [channel] NISCOPE_VAL_ARRAY_GAIN, actualRecordLength, wave [channel], & wfmInfoPtr));

  Thank you very much!

• Why my element in the Comp panel not scroll when I move the current-time indicator?

  Why my element in the Comp panel not scroll when I move the current-time indicator?

  

• How do you define the current-time indicator to return to the point that he started on an audio overview?

  in the most recent version of the software, how do you define the current-time indicator to return to the point that he started on an audio overview? He did it in the old version. I don't find a setting for this in 2015 software. Thank you

  You can use the zero on the numeric keypad key. See the sixth in this article:

  known issues in after effects CC 2015 (13.5). After the effects of interest area

• Start the text layer (using the text tool) of the current-time indicator - Adobe after effects CC

  It's something that would drastically improve the speed of my workflow. When I click inside a composition using the text tool, the text layer is always positioned at the beginning of the composition.

  Is it possible to make the text layer from the current-time indicator, so don't constantly do defiler to the beginning of the composition and drag the text layer forward in the desired position?

  Thank you very much.

  There is a preference: create layers at Composition Start Time.

• Updated, see move the current time indicator

  Hi to everyone!

  I have disabled live mistakenly updated when you move the current time indicator!

  How can I return?

  Thank you!

  Click the Live Update pass at the top of the editing window.  It looks like a small box of wire on a solid box.

• Estimate the delay time when running

  Hello world.

  Currently I have a VISA program for playback of signals to a GPS receiver. The program I want to measure the execution time-out, which is the period between the beginning and the end as shown in the jpg file. Are there any vi LabView facilitating this end? Thank you very much.

  Kind regards

  yukfai88

  See attached screenshot that shows how to use it in your code below and VI. One solution...

  

• Position the current-time indicator

  If I type in 1, ICT ends up in 1 second, as I expect.  If I type in 10, it goes to 10 seconds.  If I type in 60, he goes to 1 minute.

  Why then it goes to 1:40. 000, when I type in the 100?  In my view, he expected to go to 1:00. 000, even as if I typed 60.

  OK, typing this possibility, looks like hearing is reading my entry in seconds.  But... I'm lazy.  I don't want to do conversion.  So, how to place ICT in 3:40.000 in typing 340?

  Build 8.1.0.162 (2015.1) on Windows 8.1.

  Of course there is - it's just not your lazy way. The numbers for help, you can either type: and. as delimiters, or just the cursor on you edit and correct simply, using the back button back.

• There is a lighter grey section near the "current-time indicator". What is this for?

  

  Nearby the 'current leader", there is a lighter grey section. What is this for?

  It's the right answer.

  1 re: what mean COLOR GRAY light near CTI?

  Todd_Kopriva

  Which responds with After Effects:

  Using After Effects | Various animation tools

• current-time indicator shows all the way

  As I updated my version of After Effects to 13.5.0.347 I don't see the current-time indicator spans the time line. This makes it difficult for me to know where to cut things.

  See the screenshot.

  

  Any help?

  The update of the corrections after effects CC 2015 (13.5.1) is available, which corrects this problem: http://adobe.ly/1Il5JYe

• Current-time indicator will not go at the end of the comp in After Effects CS6

  The current-time indicator won't pass at the end of the comp in AE CS6. I install a new comp for 10 seconds. When I drag the Guide to current time OR press the end key to bring the current time at the end of the Model Locator, it stops at a value of 09:23. Is this a bug?

  No, your pace is obviously 23.976, or more likely TOcorrrectly 24.

  The first frame of the model is ZERO, as 00:00.  The last image is 09:23.  Which is what you defined.

  00:00 - 09:23 is ten seconds.  00:00 - 10:00 is 10 seconds and a picture.  If the beginning frame was ONEframe, you would be correct in your statement of misfortune.  but the beginning is ZERO.

• Time value of the time indicator?

  Is there a property that allows a script read the time value of the current-time indicator?  If so, how?

  Thank you!

  I think it would be fair to the attribute of an hour :

  Alert (App.Project.activeItem.Time);

  Dan

• change the Timer class Delay time

  Is it possible to update the duration of the Timer class period while it is running. I want to update using the slider, but it seems not updated. I even stop the timer on the event cursor THUMB_PRESS that restart after his change. Doesn't seem to work that way either. Any ideas?

  I thought about it. Instead of setting a variable speed where the Manager works for the slider I directly changed the delay timer variable to equal the value of the slider. I feel stupid now, but it works very well.

• Office 2013 on Win7 using bootcamp has delay time

  I use Win 7 teacher on a piece of Macbook Air 2014 with bootcamp 5 and MS Office 2013. Up to 4 weeks everything works well, and the performance was great. And then I got the delay time:

  -Closing remarks is the longest in about 4-5 sec

  -editig one Excel cell and switch to another will cost about 4 to 5 sec

  - and so on

  Thanks to this performance, it is horrible to work. I have also removed Office and install it again without any result.

  Anyone have some advice for me? Is there some patches in which software never cause this?

  Or am I alone with this?

  THX in advance

  Frank

  Your is no longer in a Mac environment, if this side of "windows" because you're not virtualize, you run Windows as a complete solution for Windows. OS X doesn't play not any part of your experience. Windows as OS X should be updated with patches and update securities, the latter is the only support Windows offers for Version 7, it is out of development and was removed by Microsoft for more than a year. All compatibility fixes should come from Microsoft, see microsoft.com for the availability of these.

  Outside the correction and the issues pourraient be caused by:

  Disk fragmentation that is common in windows. (However it is not under OS X, don't defrag on Mac, OS updates will do everything if it you better than anything you can buy)

  hard disk-ragmenting https://support.Microsoft.com/en-us/help/17126/Windows-7-improve-performance-def

  Font management (again, on the side of 'Windows', your OS X fonts do not play in this)

  3rd party Windows applications, such as anti-virus and the litany of bloatware inherent with Windows. Windows has a startup mode for troubleshooting.

  https://support.Microsoft.com/en-us/help/17419/Windows-7-Advanced-startup-option s-safe-mode

  and possibly disk goes wrong, which can be controlled using this method

  https://support.Microsoft.com/en-us/KB/2641432

• Current-time indicator Question

  There is a grey area follows behind the current-time indicator, everywhere where he's going, and the preset animations will move on, how to change this problem

  What is the problem? The gray area around the time indicator simply indicates the angle of the shutter and the motion blur shutter phase:

  Using After Effects | Various animation tools