the digitization of my printer function works like

Similar Questions

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• one by the xerox phaser 7300 printer will work with El captain

  One by the xerox phaser 7300 printer to become compatible with the captain.  Xerox shows no current drivers available?

  I think that the support dropped for Phaser 7300 Xerox about 10.6.8. If the generic postscript driver is not good enough for you consider trying the Gutenprint drivers:

  http://GIMP-print.sourceforge.NET/MacOSX.php

  I don't have access to a Phaser 7300 so I can't comment on the way in which these solutions work, but IME, Gutenprint drivers are usually pretty good.

  C.

• NOT FOUND ON THE NETWORK BUT E-PRINT HP7500A WORKS OK

  Hello

  I have an OFFICEJET 7500 a printer.

  This is related to my network without any problem on the printer wireless network page.

  Can I use e-print by sending an email to the printer and it prints ok.

  However, I can't print on my netwrk House to her. The mistake of the printer is unable to connect to the printer. Also when typing the IP address in a browser, it is not found. The hp network diagnostic tool also can not find.

  I tried resetting it, it works, reconnect to the network switch but nothing seems to work.

  When I installed first, everything was ok, it was two days ago. Now the only way to print is to send an email - please help.

  Thank you

  Hi The_Bandit_05,

  Follow the steps in the document at the link below. Let me know what you find?

  The information contained in this document pertains to HP products that have already been set up and configured for wireless and work wireless for quite awhile. This document contains information on the possible causes of an interruption of the wireless connection, tips to avoid the problem and the General troubleshooting steps to help you re-establish the connection Wireless on your HP product.

  Printer keeps no connection Wi - Fi

• the hp envy 4500 printer will work with a Samsung Galaxy 10.1 running 4.1 android OS

  The HP Envy 4500 will print wirelesly using a Samsung galaxy 10.1 Android.1 running

  Yes,

  You can print using HP ePrint mobile app.

  Follow the steps below in "printing with HP ePrint mobile app:

  http://support.HP.com/us-en/document/c03679829

  Shlomi

• How to get the scanning and fax utilities works from 2840 printer. Print function works from pc

  I changed my google chrome browser and I finally got my confiquered pc and printer. He is an all-in-one 2840 color laser jet. How do I get the scan and fax utilities to perform?

  It is useful to include the manufacturer and model number.

  What version of Windows you have, including the service pack?

  How the device is connected to your computer (USB, Ethernet, other)?

  Have you installed the software that came with your HP Color LaserJet 2840 AiO printer?

  If not, why?  If you did, what error messages you are seeing?  Please report messages completely, without paraphrasing.

  Start here: HP Color LaserJet 2820 and 2840 AiO products Series - first installation and install

• I use Photoshop CC and I have problems to use the scanning feature PLC culture and the strraigten.  Other printing features work within the progrram, but no connection when I use don't automate.

  Am I missing a configuration of PLC to allow me to crop and scan several photos?

  With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.

  Help.

  [email protected]

  VIC

  I plugged a usb cable and I was able to use the WIA import feature and

  the menu of the controller,

  He gave me the opportunity to select the printer and scan using the automaton

  function.

  When I removed the cable, it would not recognize the printer scanner in the

  Wireless mode.

  I tried to restart the system, no luck.

  In fact, when the cable is removed, the function to automate is

  "grayed out" which would explain why it cannot find the scanner.

  Any ideas?

  VIC Ouellette

  K1CGI... QRZ?

  In a message dated 12/09/2015 11:41:18 eastern standard time,

  [email protected] wrote:

  You talked

  by [email protected]

  (https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I

  problems to use the scanning feature strraigten and the cultures of the automaton. Another impression

  features work within the progrram, but no connection when I use don't automate.

  in Adobe Community - view [email protected]of reference for you

  (https://forums.adobe.com/message/8274458?et=notification.mention#8274458)

• The Officejet 4500 wireless printer can work wireless with a Wireless N Router?

  My Officejet 4500 Wireless printer worked fine with my router wireless of the B of aging, but when the latter died, I replaced it with a Wireless N router, the 4500 is possible to work with the N Wireless neworking Protocol?  Thanks for your help.

  Hello, you printer HP Officejet 4500 Wireless all-in-One Printer - G510n cannot work in the band ONLY, but your new router can be configured to accept the 802. 11b / g wireless protocols and be able to continue to use your printer. Just check the manual of your new router to enable this feature, it is easy and does not affect the performance of your wireless network.

• -How to make 'save & print' function work? -silverlight on mac

  I have a mac, 10.9.4. I use silverlight with browser safari 7.0.6. Everything works fine. I can not just save and print.

  Does anyone have any suggestions?

  concerning

  Hello Smittychat,

  I am now using firefoxbrowser. Saving and printing works very well.

  I enjoyed your frequency

  concerning

• I changed the ink in my printer, it worked twice after that, but now the ink lights. Does not print.

  The printer is an EPSON multy 3 in 1 NX100series Stylu.

  Contact Epson or check their support website to see what could be the problem.  This indicates a hardware problem with your printer, not a Windows problem.

• NONE OF THE NUMBERS ON MY SHOP ELEMENT WORKS LIKE A BOX 13 OHOTO SERIAL PERSON HELPED ME

  CAN'T FIND A SERIAL NUMBER OF INVALID FOR PBHOTOSHOP ITEM 12 CAN DRAW IN ADOBE HELP NOW ME.

  !

  Quickly find your serial number

• Want 7645: Printer installed on the new PC - SScan will not work

  New PC/laptop with windows 10 and existing 7645 envy with wireless connectivity.  Print function works fine.  Scan of the computer does not work.  The 7645 does not list the new PC and the old series # figure 11 times (!) in the window of the computer analysis.  Can anyone help?  Thank you.

  Hello
  
  You may need to start from your computer first, please try:
  
  Double-click the icon of the printer on the desktop,
  Select manage the Scan of the computer
  Click Enable-
  
  You can start automatically with Windows, BUT you will get an arror message if you turn on the computer FRONT of the printer.
  
  Kind regards.

• Printer HP C509a range: new/still a problem with the C309a with wireless printing

  Printer is now, do not print, then all the sudden days later, it will print what was in the reference. I checked everything I know how to check. I think to unstalling the software, but when you do that... There is ALWAYS something that lingers to create a problem during the installation again. Is there a good way to get rid of the computer of all the files that relate to the printer?

  OK, here's where I am. Computers 3 1 HP printer. I removed the HP software. Reinsall after I did the "usbready.exe" file in order to load the software.

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/C309a-software-will-not-install/m-p/5476271#M79658

  FYI

  1 computer is wired 150 ft. - works fine. The other 1 computer (wireless router) to the point of HP printer

  works very well. It is the 3rd computer wireless to the router but does not work. The software, see TI but not install and plug. In one of 3 different choices. Now, I got a little my limits. I'll try to go in the "devices and printers" see on adding a printer and see if that can cling to the top. He is a friend and 24 far mi but needs to be done. The choice of HP software is the USB connection, Ethernet connection and wireless connection. All 3 see the printer but do not begin upward.

  Get it!... see red

• can not get the printer to work when sending my laptop computer that he used to work the printer is on and functional

  Can't get printer to work when sending my laptop computer that he used to work the printer is on and functional. Canon pixma MP180

  Hi NickManchisi

   

  1. for how long have you been faced with this problem?
  2. what happens when you try to print?
  3. do you receive any error messages?

  Method 1 :
  Please refer to the below mentioned article and check if the given steps help.

  http://support.Microsoft.com/kb/308028

  
  Method 2:

  You can even perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time when you have not experienced the problem.

   

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Refer to the following help link on performing a system restore.
  http://support.Microsoft.com/kb/306084

   

  I hope this helps.

• I can't get the screenshot of Windows to function at work. I try to push the Windows and print screen key, but it does nothing.

  When I used Windows 8 Developer Preview screenshot function worked fine. The screen flashed and saved my screenshots. I pushed the Windows and print screen key. Now that I've updated, I can no longer do this. I am of ideas what is wrong. Any help would be great!

  P.S. - This is the account I want to use! So I thought to it. In the case of my laptop (HP HDX 16 t) I have to press FN + WINDOWS KEY + print SCREEN. If anyone has the same problem, they should try it.