The document will appear smaller on Mac Book compared to the iMac?
Hello
I use the Mac for my work in Photoshop. Right now on my Mac Book Pro, I use Photoshop CC 2015 (subscription) on my iMac, I bought and installed on those.
in any way, if I'm trying to edit a file at 300 DPI on my iMac the canvas shows greater that it does on my Mac Book Pro. Why is this? And can I change this?
It is annoying because the right canvas appears much too small and is more difficult to work. I can work on a file on my Mac Book Pro and it seems all good, but then open it on my iMac, and things are just not right because the canvas size is larger and the design does not look right and vice versa.
I never had this problem before, until a recent (not sure how long ago) updated with Adobe Creative Photoshop Cloud. A lot has changed, and it was one of those changes.
Any help would be greatly appreciated!
Thank you
Jon
When you view a document on the screen to display 100%, Photoshop displays a pixel of screen for a pixel in the image.
The physical size of the pixels of the screen depends on the resolution of the screen and its physical dimensions.
Your Mac Book has smaller pixels, probably because the screen is physically smaller, and it may also have a higher resolution than the screen of your iMac (retina?).
So is that what you see is completely normal, and has nothing to do with Photoshop, which has to display the images correctly - it's a screen pixel for pixel of an image at 100%.
If it is a Retina display, web browsers and other programs dimensionnera images at 200%, to compensate for the small pixels (high density of pixels), which can be confusing. But Photoshop shows the image correctly.
This has been discussed several times on this forum, like this:
100% zoom is too small on the screen (the designers don't you displays high resolution)
and here: Photoshop cc 100% opinion question
Tags: Photoshop
Similar Questions
-
Creative cloud does not load. I can see the icon in the menu bar, but when I click on it I only see the loading wheel. No applications will appear. My MAc system is a fresh update 10.9.3
Divaviva please try the solution 2 in desktop applications lists CC as "up to date" when the no facility not - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.
-
My MAC Book Pro does support Wi-Fi 5 GHz?
Dear,
I need your help. I'll try to find the WiFi 5 GHz, but it does not appear in my Mac Book Pro while other computers and my Iphone 6s can and works perfectly. I don't know whether or not my Mac Book Pro supports 5 GHz. I would be grateful if someone could help me. Here are the details of my Mac Book Pro.
MacBook Pro (13-inch, mid-2012)
2.9 GHz of Intel Core i7 processor
8 GB 1600 MHz DDR3 memory
Card type: AirPort Extreme (0x14E4, 0xF5)
Firmware version: Broadcom BCM43xx 1.0 (7.21.94.136.1a1)
MAC address:
Locale: ETSI
Country code: QA
Supported PHY modes: 802.11 a/b/g/n
The supported channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 149, 153, 157, 161, 165
Wake On Wireless: support
AirDrop: support
Status: connected
Million thanks in advance!
The simple answer is no.
DISPLAY
Built-in display 13.3 inch (visible diagonal) backlit by bright panoramic LED Resolutions 1280 x 800 (native), 1152 x 720, 1024 x 640 and 800 x 500 pixels at 16:10 aspect ratio x. 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 format; 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 extended format; 720 x 480 pixels at 3:2 format. 720 x 480 pixels at 3:2 format stretched GRAPHICS
Graphics card Graphics Intel HD 4000 Graphics memory Up to 1 GB of DDR3 SDRAM shared with main memory Connection of the screen Digital video output Thunderbolt Display stand Support for up to two screens Thunderbolt Display modes Dual extended display, copy video and AirPlay Mirroring External resolution Up to 2560 x 1600 pixels -
LR 4 install not on Mac Book Pro
LR 4 will not install on Mac Book Pro. System requirements have been met. Installer "fails" contact software manufacturer
Go to the Adobe website - www.adobe.com. Go to the download section and download the trial version of the latest version of Lightroom 4 (4.2). So which installs OK, then use your serial number of every time that you got 4 LR to activate.
-
Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.
Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.
Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.
You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.
-
I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!
You probably should have updated to 10.5.8 first.
Installation or update of Snow Leopard:
http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF
-
How can I remove the default documents that come with a new Send on behalf of Signature (EchoSign)? (I9, W9, W4, etc..) These are old and obsolete, so I don't want those who will appear for selection.
With the account of the company, you will get an option to remove these forms.
Pro account you will need to contact the support team EchoSign
With the free account, it is not possible.
-
Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.
Thanks Jerri
If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:
https://support.Apple.com/en-us/HT201462
Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port. If the HARD drive is recognized, you can copy the data out of it.
Ciao.
-
How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?
Technically, since it's the same effect with the same settings, it works on both sizes. However, you need to test both is to decide if it will appear visually correct on both screens or not. On screens more wider/taller objects can appear earlier on the screen, it is advised to test again on both screens.
See you soon,.
Vikas
-
I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion. In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close. This message of the 2 line took almost an hour to type as I have no control on the touchpad.
Hello Kluggerjo,
Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.
I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems. This article will guide you in this process: reset the management system (SCM) controller on your Mac.
If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user
If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X
If you experience any problems or have any questions, please let us know. The entire community is here to help.
-Best regards -
I'm running OS X El Capitan 10.11.5 and my daughter and her friends used to watch a movie last night and stop it before releasing the film. My Mac Book Pro is the start of the password reset screen/mode? It gives me only 3 options, none of which is true. (1) I forgot my password. (2) my password does not work when you connect 3) my keyboard does not work when you type my password to connect? When I opened the Apple on lft albums he gives me a boot disc, restart and turn off? I tried all the options and it restarts just on the same page? Someone at - it advice? Thanks in advance!
The appearance of the password reset screen indicates FileVault2 is enabled on your MBP. Fix?
If so, that'll probably get you out this Pickle: https://derflounder.wordpress.com/2015/01/17/yosemites-filevault-2-pre-boot-reco very-options /
-
I have created a slideshow using Photos app. I wish that the images will appear randomly (as they can in Power Point), but I don't see where in the settings that allows this. Any thoughts?
There is no option in Photos for MAc that allows you to randomly pull a slide show.
You can create an album and have the album as an instant slide show in a random order using an Apple Script.
See this link: Script: Shuffle Photos for an instant slide show in a random order
-
In Yahoo Mail, when you compose an email I get a Panel "asking to leave this page. It does not matter that I choose to stay or leave, the Panel will appear again... and again... the only way is to force enough Firefox and start all over... help please...
Some extensions or toolbars can add such a report.
It can also be part of the code on a page to prevent dataloss if you began to type text (composing a new mail) and you try to close this tab.
You should be able to close this report and close the active tab.What I posted above is applicable to all platforms, including Mac.
-
How to reset the password forgotten administrator on my Mac book
Follow these steps:
- Shut down your Mac (choose Apple > Shut Down).
- Press the power button while pressing the command-R. The Mac will start in recovery mode. ...
- Disk utility and click on continue.
- Choose Utilities > Terminal.
- ResetPassword (all one word, lower case letters) and press return.
-
My Mac Book Pro iTunes no longer displays my playlists and under the songs I see that previously downloaded MP3 songs not many who were previously in iTunes and part of my playlists. .
Turingtest2 CSA user help document: empty/corrupted iTunes after upgrade/crash library - https://discussions.apple.com/docs/DOC-6561
If you do not see your content after updating to iTunes - https://support.apple.com/kb/HT203225
Maybe you are looking for
-
Satellite P200 - error when creating new recovery disc
Hello I need to format my Satellite P200, but I have some difficulty. I lost the original disc that came with the laptop. I tried using the Recovery Disc Creator, but every time I run the application it I'm greeted by this error: An unexpected error
-
6.5.0 vs 6.6.0 on Pro6
I'm about to venture into the relm of OS6 on my Pro6 and I'm curious to know if I should start by 6.5.0 (which, from everything I've read, is very stable) vs tries to run 6.6.0. I see that some applications do not yet work on 6.6.0, one of them being
-
Update video card for an HP P6310UK
I have a HP P6310uk with an installed Nvidia G210 Tower. I would like to upgrade to a video card with Directx 11. I want to do this without changing the power supply if possible. I was looking at maybe a Nvidia GT610 as its similar in size and power.
-
my mouse is broken and I don't know how to maximize my window without pressing f11. If I can not close it by pressing ctrl w and then how to close a window or how to the address bar or the top bar which reduce it, restore and close buttons?
-
How can I add my own patches to WSUS?
I want to add my own service packs on the wsus server, something which cannot not available on microsoft updates or takes too long to download from the .exe file, I I want to add manually to the wsus. Is there anyone who can help me? Thanks in advanc