The drain of the battery even after the computer is shut down.

Similar Questions

• Explorer.exe stops when the computer is shut down

  Explorer.exe stops when the computer is shut down

  Hi DickKimberley,

  ·         What exactly happens when you try to shut down the computer?

  ·         You receive an error message error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

   

  Method 2: If the method above doesn't follow the article mentioned below.

   

  Windows stops responding during Windows XP shut down

  http://support.Microsoft.com/kb/307274

  Let us know if that helps.

• shut down the computer to shut down after inactivity

  Computer turns off after a period of inactivity.

  What arrangement can I change so that my computer can't even after the period of idle?

  Thank you very much

  Margo

  Check the power settings in the control panel.

• Updates required when the computer is shut down.

  "I get ' 7 required updates" message every time I want to shut down my computer.  Is there something wrong somewhere?  If so, how can I solve this problem?  It seems a little fishy to me that there are still 7 upgrades necessary.  Thanks for any help you can give.

  "I get ' 7 required updates" message every time I want to shut down my computer.  Is there something wrong somewhere?  If so, how can I solve this problem?  It seems a little fishy to me that there are still 7 upgrades necessary.  Thanks for any help you can give.

  Update in Windows and connected to the Internet with a little time on your hands and knowledge.

  Open Internet Explorer, go to http://windowsupdate.microsoft.com/ and do CUSTOM scan and determine what updates you need.  Install them.  Reset.  Repeat the visit, CUSTOM and see if updates (one of those that you just installed) back upwards.  Just list those here (KB #)...

• I am meeting the computer is shut down or stopping himself?

  while I'm on my desk one another in a few minutes the computer suddenly stop. And what is the red line graph in the TASK MANAGER > PROCESS

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  I suggest that you try to perform the clean boot and check:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• S2716DG buttons layout market/Menu does not, the Image block when the computer is shut down

  Hi all

  I had my monitor for about two weeks and it works fine, but yesterday the menu and power buttons unresponsive. The light on the power button is also disabled. If I turn off my PC the picture hangs at the screen closed until I have turn the computer on. Otherwise, the screen seems to work very well. I have not tried to unplug it and by him plugging back in since it's my only monitor at the moment and I won't be able to use my PC the case. Anyone know what could be causing this?

  Thank you

  Not sure, but you should try resetting the monitor =
  * Turn off the monitor
  * Unplug the monitor power cable and all other cables from the rear bottom side of the monitor
  * If a mechanical monitor power button / power off, press the button in 30 seconds (erases all residual power in the circuits). If not a mechanical, just power button wait 30 seconds
  * Reconnect all cables and retest

• I have a problem with the computer is shut down.

  Original title: shut down the computer

  I pressed the stop many times but nothing appears. What is the solution to this problem?

  I pressed the stop many times but nothing appears. What is the solution to this problem?

  Windows 7 now allows you to change the behavior of the action of the right power button in the start menu. No record no hacks without control panel. Go to the taskbar and start menu properties. Select Start menu tab and you will find the option to change the power button function on. You can change the behavior of power down for

  • Change user
  • Close the session
  • Lock
  • Restart
  • Hibernate
  • Shutdown

  This is a good option if someone tries to stop power button and it locks the computer nicely.

• Vista - when the computer is shut down, continue to get the same updates offered and does not

  Update of security for MICROSOFT.NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x 64 systems (KB2160841)

  Everytime I go I turn off I get this update. It happened now 57 times in the last month. It seems that the downlaod fails when checking for details. Is it possible that I can remove the update total.

  * original title - Codes *.

  How to hide updates or restore the hidden in Windows Vista updates
  http://www.itechtalk.com/thread5013.html

  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Your problem can be solved or answered if you post on the forum of Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• "dla works for someone else, still you want" when the computer is shut down.

  Original title: SONIC DLA

  When I stopped, I get "dla is running for another user, you want to keep" what is sonic dla and how calm he stop stop?

  http://www.Roxio.com/enu/products/dla/overview.html

  It stipulates that Roxio has returned sonic and can resolve incompatibility errors.

  That being said, what is the make, model and the model number of the pc?

  you will need to go to the manufacturers Web site and search for updated drivers.

• Message "CCSVCHST. EXc always current, end program now? "when the computer is shut down.

  Original title: ccsvchst.exc

  When I stopped my PC there is always a box for the message "CCSVCHST. EXc always current, end program now? "What is it, and if I can remove the program?

  It is a problem with norton

  or visit their Web site and updated with the live update tool or uninstall norton by using their tool to remove and reinstall.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=en&CT=us

  romoval tools

  http://community.Norton.com/T5/Norton-Internet-security-Norton/ccSvcHst-exe-error-on-shutdown/TD-p/496952

  thread to discuss the issue.

• the computer is shut down while the phone is updated

  I have a problem with my phone... when I try to power on this issue... the word from Sony that appear and the phone does not open :/

  (Sorry I speak good English)

  

  Try to perform a system repair

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)

  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when you are prompted, always connect your phone off press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• USB ports have power when the PC is shut down. Power supply connected to the battery.

  PC is HP G62 - 222us W7 64-bit.  When the PC was first powered, they gave me the option to allow USB ports ON or OFF after his stop. I chose IT, but now I want ports USB OFF after his stop.  I can't remember have this option is found. Any help would be great.   Thanks in advance for your help...

  I found my answer: Control Panel Goto (W7), search for 'power', click "Change the Power settings", click on "USB settings", click on "USB selective suspend parameters", for the battery, select "Disable", except change, click OK.

  Now, all USB PORTS are INACTIVE when the PC is shut DOWN.

• How to tell the Scheduler to shut down the computer after completing the task in Windows 7

  I created a task using the Task Scheduler that runs on my computer at 23:58 on Saturday and then back up my PC to my external hard drive from Seagate. That works fine, but I'm not finding a way to have Task Scheduler shut down the computer when the task is completed. I encouraged four hours for the backup must be completed. When I am absent Sunday or more I come home to find the PC always on. I have reviewed the task scheduler management articles and see no way to reach my goal. What should I do? Thank you.

  zigzag42

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems using Task Scheduler.

  I suggest you to refer to the suggestions by Aziz N replied on July 14, 2010 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-to-schedule-computer-to-shut-down-at-a-certain/800ed207-F630-480D-8c92-dff2313c193b

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• HP Photosmart Plus B209a-m wireless disconnects once the system is shut down

  I use the HP Photosmart Plus B209a-m on a Dell XPS 16 with Windows 7 64 bit. I have set the printer to connect to the wireless router Belkin isn't on the network. I have setup the printer several times and had it work wireless several times. Once the PC is shut down, the printer goes offline. I have to restart the installation time and time again to bring wireless online. I added the MAC address of the Belkin router and I have the camera had confidence in my Norton Firewall. I keep seeing "HP Network Support Automatic (delayed start)" in services, but by changing it seems to make a difference, I still need to run the installation once after the system is shut down. I see also two printer icons in devices and printers. We're just the Photosmart printer with a generic printer icon; and the second is Photosmart printer, Scanner, copier with a picture of the Photosmart which I believe it should be. I ran the installation at least 10 times and I get a good wireless system work then after that the machine is stopped for the day the printer is offline and do not print. How can I stop the printer goes offline in wireless mode?

  I solved the problem.

  I put the IP address to the MAC address of printers in the router.

  I put the printer to TRUST in the network settings on Norton Security Suite.

  The printer works wirelessly all the time now.

• Network connected to PSUS4 printer goes offline when the PC is shut down...

  I am close to giving up this problem, help would really be appreciated.

  My printer network disconnects when my computer is shut down or sleep. I have a Samsung printer connected to a print server through a router Linksys WAG160N Linksys PSUS4 wireless. Two computers that are hard cables to the router to see and access the printer without problem. I now have a new laptop Sony Vaio (Vista OS) that accesses the router WAG160N wireless. The Vaio connects to the internet OK, but everytime I shut down the PC, the printer is offline and remains offline to the Vaio when I start again.

  If I remove the printer of the Vaio and then 'add printer' again, by selecting the option "Add a network, wireless or bluetooth printer" shows the printer as \\LK90a6dd\p1 network is available. But if I try to connect to it, I have "X Windows cannot connect to the printer". If, instead of this, I choose 'Add a local printer' and select the existing port "\\LK90a6dd\p1 (renderer client-side) ' and the printer driver series Samsung ML1210, the printer is installed, works very well and remains online - until I have stop the Vaio, it is. Then delete the printer, install the printer etc to access the printer again.

  Pleeeaaassseee help...

  Kevin, I owe you a drink. I have added the printer as a local printer (as opposed to network), entering the IP, etc print driver, restarted the computer, and... the printer remained online. Unlike many critics of Vista, I found that it is a reasonable operating system. But maybe it's the glitches like these that give it a bad reputation. Thanks a lot for your help. Really enjoyed.