The DRC is not disabled for first to edit on hearing

Similar Questions

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• Error when burning DVDs in pre 8.0 "target error device - the device is not suitable for use.

  I'm trying to burn a dvd in first elements 8.0 but after 96% iam getting this error:

  "device target error - the device is not suitable for use.

  I tried all these steps according to this link: http://kb2.Adobe.com/CPS/515/cpsid_51553.html .

  System configration:

  Win vista 32 bit.

  Processor: Amd athlon 64 dual core 2.60 GHz.

  RAM: 3 GB

  Graphics card: nvidia geforce 6150 is.

  Model number of camcorder: JVC gz-hm320.

  Format: .mts

  Image size: 1920/1080

  Frame rate: 29.97.

  

  Please look at this problem.

  Concerning

  Manoj Khati

  Here are the search results for your error: http://forums.adobe.com/search.jspa?q=device+error+target+device+isn%27t+suitable+for+use& resultTypes = MESSAGE & dateRange = all & communityID = 3271 & username = & numResults = 15 & rankBy = 10001

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Recently downloaded version 9.0.1 and the url is not valid for the default home page. The default home page is still supported?

  I currently have www.google.com set as my homepage, but Firefox says that the url is not valid for the default home page.

  The problem is now solved with the current version of Firefox 10.0. Thanks for the help ccbrunt and SafeBrowser.

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• The server of the DNA is not reesponding for the wireless

  The server of the DNA is not reesponding for the wireless which is the steps to solve the problem?

  The server of the DNA is not reesponding for the wireless which is the steps to solve the problem?

  Where do you get your DNS addresses from?   For example, use nslookup or ipconfig/all

  In fact, let's try this:

  for /F "delims =: tokens = 1 *" %i in (' ipconfig/all ^ |) " find "DNS Se" ') do nslookup %j %j

  (Copy and paste that in a cmd window).

  HTH

  Robert Aldwinckle
  ---

• drive not ready message "the drive is not ready for use check the a drive, etc.".

  as soon as I connect my camera to transfer the photo I get following message

  The drive is not ready for use: the door can be opened. Please check the a drive; and make sure that a disk is inserted and that the door is closed.

  I can't get rid of this meaasge if I have to cancel it reappears 10 seconds later it just won't close very boring

  Hello

  What is the number and the model of the computer?

  You have the computer floppy drive?

  Were there any changes made on the computer before the show?

  Follow the steps:

  Method 1:

  Remove all external devices connected to the computer such as printers, scanners and external USB hard drive and check if the problem persists.

  Method 2:

  Check the BIOS setting and also, I suggest you to update the BIOS. To update the BIOS, contact the manufacturer or the manufacturer of the access Web site.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Error 2753 - the file is not marked for instalation

  Hello

  For a few days I am trying to install a program but keep on receipt of this message - "Error 2753 - the file is not cheap for instalation". I tried to solve the problem with Mr. Fix It but still nothing... Please help

  Have what difficulties you tried it?
  What program are you trying to install?
  Is it just the program that to happen?

  You can try (re) install the latest installer of Windows version WindowsXP-KB942288-v3 - x 86 .exe from here: http://www.microsoft.com/download/en/details.aspx?id=8483
  Note that you need to have SP2 or SP3 installed.

  Let us know if the same problem while trying to install that.

• Try to connect to the network, get a msg "the server is not configured for transactions.

  I have a desktop running Vista Professional (SP2) and a laptop running XP Professional (SP3). They are connected by a WiFi network, the Desktp acting as a server. Everything worked well until the Office had a problem and had to have re-installed Windows. Now, although the Office can find the laptop, the laptop can not find the office or its working group. I get a message " is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions. The server is not configured for transactions. »

  • But once, for about five minutes, it worked - and then stopped again. For no apparent reason.
  • If I connect with an Ethernet cable and no WiFi machines, the last sentence of this message changes to "the list of servers of this working group is currently unavailable."
  • When you run the Configuration Wizard from the network on the laptop, he told me that I have to run the Wizard "on each of the computers on your network. To run the wizard on computers running XP, you can use the Windows XP CD or a network setup disk". I was not able to do so - the XP disc I have does not behave as indicated by the wizard and the wizard does not recognize my CD - RW drive to create a network setup disk.

  Can anyone help?

  Well, who has not responded to my problem, but it was eventually fixed by a support guy with the company who sold me the desktop PC. As I understand it, it was a problem of file sharing. Seems he had to undo sharing all my records on the desktop, then re - share once again, since when I did not have this particular problem. But it's obviously not ideal (in MS eyes at least) to the network of computers with different operating systems.

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• T610 with Windows Embedded 7 - the system does not license for the operating system image

  Hello community,

  I bought a refurbished computer ThinClient T610 that is running a Windows 7 Embedded English. The label on the package says, that the computer ThinClient is allowed with W7E. When I now run Easy Tools installed on the computer ThinClient hp to create a USB Image with the German language, everything works fine: the image is downloaded from the web and put on the stick.

  But after you start the stick, the installation program tells me: "the system does not license for the operating system image. What I am doing wrong? The BIOS is already the latest.

  Or y at - it another way to transform the operating system in German? There should be an option to download additional languages, but this particual window has no other options. And I have not found any manual way to download other languages.

  Concerning

  Michael

  Sometimes it can be so easy... ;-)

  So here's my solution:

  1. go on the Web for hp Support site

  2. go in the software and driver download

  3. set the language of driver on the language of your choice (in fact: it was the main problem)

  4. download an operating system image

  5. run the configuration tool and copy the image of an operating system on a flash drive

  6. restart the workstation and install the os

  7. take advantage of your computer ThinClient in the language of your choice

  I don't know, why the hp Easy Tools downloaded the image of evil, but with this solution, that I find myself at the same point, as if they did.

• my pc cannot accept the installation of antivirus, it shows that the system is not suitable for running ms Dos and ms windows app com help me install

  my pc has failed to install any antivirus it shows that the system is not appropriate for the execution of ms - back and ms windows application help

  Hello

  problems to install your anti-virus software, contact the manufacturer of the anti-virus

  also scan for Malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Switch to the correct encryption certificate I get the error: "Key not valid for use is specified state."

  Used
  Now cannot open encrypted files.

  When you try to pass the correct encryption certificate I get the error:
  "Key not valid for use is specified state."

  See this http://answers.microsoft.com/en-us/windows/forum/windows_7-security/keeping-passwords-secure-microsoft-policy-on/39f56ef0-5d68-41ad-9daa-6e6019c25d37

  It is as it's supposed to as an anti theft precautions. I mean that data is encrypted, if somebody stole your hard drive and the hard drive boots and the other account it can receive data.

  If you not export recovery certificates and encrypting the data, you cannot redo the decryption.

  http://Windows.Microsoft.com/en-us/Windows/back-up-EFS-certificate#1TC=Windows-7

  If it's a default domain recovery agent. admin area. If it's home, to look for recovery certified you have exported.

  But third-party tools are there if you can remember old password the is to encrypt you can recover. But they are not free... and premium software is not be recommended or guided through support free forum due to the effort of preventing unnecessary advertising.

  You can do you own research about recovering data... just try to get you using the favorite search engine... "Restore access to encrypted EFS format files" or "Advanced EFS Data Recovery.

  Many more free guides will be available... Just keep in mind this is not a method to escape... you must remember your old password at least for decryption in the case where you export a certificate.

• Thread should exit the application, if the event is not triggered for some time

  Hi all

  I want to start the application thread, where I want to check the keypress or the Trackball events. If the event is not triggered for awhile, then the application must close.

  It is possble?

  Thank you

  Use DeviceInfo.getIdleTime () to determine the time of inactivity. You can check it out in a timertask and kill your app with a reminder.

• the store is down or is it my computer... the store does not load for me to download apps

  .the store does not load for me to download apps

  He has already worked? If this is not the case, check the resolution of your screen. It must be 1024 x 768 minimum to access the store and apps.