The DV6 series

Similar Questions

• Pavilion Entertainment PC dv6: need a new hard drive for the dv6-1230us

  My question is about the HP Pavilion Entertainment dv6-1230us PC. Recently, it was abandoned, and since then it has been giving me the following message if poster every time it starts.

  Not found boot device
  
  Please install an operating system on your hard drive.
  
  Hard Drisk (3F0)
  
  F2 System Diagnostics
  
  "For more information, please visit: www.hp.com/go/techcenter/startup"
  
  I know it's important to run the hard drive test, but when I run the diagnostics of the system for the Test drive, it says:
  "HDD test failed.
  There is no hard drive.

  I was also on the proposed site and even after "reset my BIOS to default", it recommends running the hard drive test, which does not simply because it has not really helped me the "there is no hard drive. There was a YouTube video that I came across thus suggested pulling the hard drive and diconnecting and reconnect to correct the error in this case that the son is detached, but that no longer works.

  SO, I don't know if there is anything more that I can do, I guess that the hard drive is super dead.

  It comes with a Seagate ATA hard drive. I was wondering if I could replace it with a SATA hard drive or should it be an ATA? (Even has the material capacity to support a SATA drive?)

  Also, it is even useful to replace the hard drive? Should I get a new laptop instead? This laptop is used mainly for just browsing online and checking emails.

  Any help is appreciated, thanks.

  Yes, the hard drive is so dead, that he not yet register as a hard drive. The dv6-1000 series certainly uses SATA, not ATA drives so I'm not sure of what you see. You can replace it with any drive SATA 2.5 inch width 9.5 mm thick.

  Watch this video between: 53 and: 59 and see that it's a SATA drive. If yours is different, so you have confused with your model.

  https://www.YouTube.com/watch?v=QQx7PlIXFuE

  Hard disks are a small fraction of the cost of a laptop and if your what it takes to, I would say that to replace the hard drive rather than buy a new one.

  It is an excellent drive at a great price:

  http://www.Newegg.com/product/product.aspx?item=N82E16822236563

  You have recovery discs? You run Windows 7? Post back if you need help more to restore system software.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I can't download itunes on my hp pavilion dv6 series

  I have a HP Pavilion dv6 series and I can't download iTunes on my computer, I got a message saying that the installation package cannot be opened. Can someone help me please as soon as POSSIBLE

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Should I buy the hard drive removable 750Go for the Y500 series laptop?

  I know that it includes a hard disk of 1 TB inside the laptop

  but you think that it is necessary to buy a?

  OK the y500 series have the Bay ltration that allow to use the removable hard disk, graphics etc.
  I mean that play games (not many) games maybe 2 or 3
  Record a movie in the drive about 250 to 270 GB
  Don't forget the y500 I already have 1 to inside
  The removable hard drive was a 720 GB external drive which can use for ultra Bay

• HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video?

  HP ENVY on the dv6 hdmi port connect to the graphics card or onboard video?

  Thank you!

  Hello:

  It is part of the audio HDMI graphics cards.

  Normally the Intel HD graphics card manages audio HDMI - even on Intel processors with AMD switchable graphics card models.

• You can a second Sata hard drive in the M series?

  Hello

  Can I install a second hard drive in the M series?

  In particular, I would like to install a Seagate Barracuda SATA 1 TB drive.

  I know he has a Bay, but I can shelter the disc in another case.

  Thank you

  I think it depends on the version of the m series that you have.

  the series m72e (small footprint); There is only a single 3.5 "sata bay.

  on the motherboard there are 3 sata headers (cd player / hard drive + 1 other).

  the way I did it was to order a double silverstone 2.5-online adapter disk 3,5 '' screwed into the slot of the drive (be careful; not all Player cards have lower fastening screws).

  This allowed me to put a ssd 2.5 "and a 2.5 hard drive" in the case.

  otherwise, it would be pretty tight/impossible to squeeze in 2 size 3.5 "hard drives in the m72e

• HP pavilion dv7, share the same heat sink with the dv7 series?

  Hello

  I have a dv7 6c05ev and I am having trouble with the heat sink and I was wondering if I could change it by another?

  so I found a few things but I want a heatsink that is compatible with my motherboard is so other models of the dv7 series have the same heat sink with my model?
  Thank you in advance.

  George.

  No, no, no. It was probably 15-20/fan different devices used with the series dv7 over the years.

  You have a Core i5 - 2450M and the Radeon HD M 7470 video 1 GB dedicated then look at the owner's manual here:

  Manual

  Page 27

  For use only with the computer models equipped with an Intel processor and a graphics card
  subsystem with 1024 MB memory discreet 666390-001

  Reference 666390-001, and the part will agree and will work.

  HP charges $ 75 for him (ouch!):

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=B22343D0B1B84F5CB4C3CCA1FF945CD1&SearchIn=PartNumber&SearchPN=666390-001

  A third of that on eBay:

  http://www.eBay.com/ITM/new-HP-Pavilion-650797-001-665309-001-666390-001-CPU-heatsink-cooling-fan-/171316580104?PT=US_CPU_Fans_Heatsinks&hash=item27e3438f08

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• He knows the error code. When he asks if I have an installation CD, and I click on the box that says I'm doing, I'm asking to choose m printer (Lexmark 730 series all-in-one) list I can find the Lexmark but not the 730 series.

  The installation CD and my add new hardware wizard does not appear to recognize this printer.

  Hello Debbie Cross,.

  Thank you for your message.  I struggled to find the 730 series printer, do you actually mean the Z730?  If so, click HERE to download the latest driver for your printer.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• The USB ports are powered ports on the DV6-1250US?

  Y at - he of the ports on the DV6-1250US powered?

  Hello

  All USB ports must be supplied.

  Kind regards

  DP - K

• a WLC 2504 does support mobility with WiSM1 on the 6500 Series group

  If a WLC 2504 supports the mobility with WiSM1 on the 6500 Series group.

  Model: WLC 2504
  Software version: 7.3.101.0

  Model: WiSM1
  Software version: 7.x.x.x

  Yes and no.

  Yes, mobility is supported.

  No, because I don't personally recommend inter-controleur of roaming.  It is true when you are dealing with 4400/WISN-1.  This is even truer when you WLC running two (or more) different codes.

• Upgrade to the controller of the 5500 series

  We currently have 5 4400 WLAN deployment series controllers in a school district and want to spend in the 5500 series. I do not know what are the best practices, but could deploy us a single controller 5500 series in one place to replace all the 4400's?

  Each site has a connection of Metro Ethernet 1 GB depending on the size of the school or 100 MB. Can I install a single 5500 and manage all the access points on the Wan or do we need one on each site? We currently only have 150 access points but are planning on growth in the future.

  It is for the most part depend on your traffic. If all of your servers and Internet are stored on your central site, there is almost no reason to have your controllers on your remote sites. However, if these types of resources are located remotely, you must leave the controllers out there.

  I've set up two types of drawings, and both are fine. Put a smaller controller at each remote location and a great couple on the central site provides a lot of redundancy. The 5508 also offers 8 uplinks, each 1Gig, providing more redundancy to the site itself.

  Your bandwidth is not at all a matter of concern, and the 5508 can support up to 250 points of access. I think that you have a good environment to deploy only the Central controllers, once again as long as your heads of traffic to your central site anyway for most applications. It is certainly very useful to have only a few controllers, instead of 5 or more to manage.

  In the end, there is no difference in the designs between 4400 s and 5500 s.

• The 300 series switches are compatible with detection of PoE before standard in old phones Cisco?

  The 300 series switches are compatible with detection of PoE before standard in old phones Cisco? They don't seem to be (7902G don't turn on when it is connected to a SF302-08MP with firmware version 1.1). What no need special configuration on the switch to enable this detection?

  Please note that the switches of the series 200 and 300 are now supported POE Legacy Cisco from September 2011, to provide power to 7960, 7940 and other phones standard pre and APs. Details on the following link:

  https://supportforums.Cisco.com/docs/doc-18337

• The HDCP of the C series is compatible?

  The HDCP of the C series is compatible?

  Hi Mark

  Currently, it is not supported.

  http://developer.Tandberg.com/Web/guest/Forum/-/Message_boards/message/27919/maximized

  Oleksandr br.

• The C - Series (TC5) ditch company directory SSH list content

  Hi, how can I list the contents of a corporate directory on the c-series ssh device hollow?

  xcommand directory search PhonebookType: Corporate (shows only the files)

  xcommand search phone book (only the local show 'my contacts' directory).

  I have a codec that will not show any content, but it shows the corporate folder.

  It would be much simpler to debug this way, if I could do that trough ssh.

  Y at - he of the log files / debug commands that shows why the contents of the phone book was not?

  Tom br.

  Hello

  xCommand directory search phonebooktype: company

  Ok
  * r ResultSet ResultInfo Offset: 0
  * r ResultSet ResultInfo limit: 50
  * r TotalRows ResultInfo ResultSet: 7
  * r ResultSet folder 1 name: '00 Cisco TSEC APAC Showcase ".
  * r ResultSet record 1 FolderId: "c_8.
  * r ResultSet folder 2 name: '01 Cisco staff.
  * r ResultSet 2 FolderId folder: "c_12".
  * r ResultSet record 3 name: "the Production of Cisco 02 meeting rooms.
  * r ResultSet 3 FolderId folder: "c_15".
  * r ResultSet folder 4 name: '03 Cisco TSEC microcontrollers.
  * r ResultSet record 4 FolderId: "c_16."
  * r ResultSet folder 5 name: '04 Cisco APAC demo Pod ".
  * r ResultSet folder 5 FolderId: "c_18."
  * r ResultSet record 6 name: '05 Cisco TSEC EMEA.
  * r ResultSet record 6 FolderId: "c_19."
  * r ResultSet record 7 name: "all systems".
  * r ResultSet 7 FolderId folder: 'c_1 '.
  * end
  xCommand directory search phonebooktype: corporate folderid: c_1

  Ok
  * r ResultSet ResultInfo Offset: 0
  * r ResultSet ResultInfo limit: 50
  * r TotalRows ResultInfo ResultSet: 51
  * r ResultSet 1 contact person: ' BJN C90 (SEP005060848B3E) (SIP).
  * r ResultSet Contact 1 ContactId: "e_4730."
  * r ResultSet Contact 1 ContactMethod 1 ContactMethodId: "147".
  * r ResultSet Contact ContactMethod 1 number 1: "SIP: xxxxxxxx".
  * r 1 ContactMethod 1 ResultSet Contact Protocol: SIP
  * r ResultSet Contact 1 ContactMethod 1 CallRate: 384
  * r ResultSet 2 contact: "BJN entry SX20 (SEP0050600723EA) (SIP).
  * r ResultSet Contact 2 ContactId: "e_4675."
  * r ResultSet Contact 2 ContactMethod 1 ContactMethodId: "148".
  * r ResultSet Contact ContactMethod 1 number 2: "SIP: xxxxxxx".
  * r ResultSet Contact 2 ContactMethod 1-Protocol: SIP
  * r ResultSet Contact 2 ContactMethod 1 CallRate: 384
  * r ResultSet 3 contact person: ' BJN Jie Wei EX90 (SEP0050600633CD) (SIP).
  * r ResultSet Contact 3 ContactId: "e_4615."
  * r ResultSet Contact 3 ContactMethod 1 ContactMethodId: "149".
  * r ResultSet Contact ContactMethod 1 number 3: "SIP: xxxxxxxx".
  * r ResultSet Contact 3 ContactMethod 1-Protocol: SIP
  * r ResultSet Contact 3 ContactMethod 1 CallRate: 384

  ignoring the cause number, contact i black their stop.

• Our daughter can Photoshop Win. Do not install a new Windows PC, after crashing his imac, where his photoshop, Vienna still; The nr series entered is invalid?

  Hallo

  Our girl can Victory of Photoshop. Do not install a new Windows PC, after having lost his imac, where she photoshop (10/2013) amounted, comes always; The nr series entered is invalid?

  Eline.
  

  Hello

  I reviewed your Adobe Id and found that you have Photoshop CS6. Visit an Adobe product for another language or version of trading platform for Windows on Mac platform swap.

  I hope it helps.

  Kind regards

  Shelly