The USB ports are powered ports on the DV6-1250US?

Similar Questions

• front usb ports are unable to detect the large capacity external hard drive (250 GB)

  Hello
  I have 250 GB external hard drive, whenever I connect to my front usb ports it detected, but pen drives, are to detect flash drives, one of my friends said that you need to update my bios & I here is the motherboard.

  motherboard: Mercury 945gcm

  It is possible that the USB 1.1 and not 2.0 ports that can explain the problem.  In addition, sometimes USB ports out enough power to run an external device that is not powered separatelly.  I don't know if updating the BIOS will help, but if there is an update available for your system (and it MUST be for your system - big bad can occur if you install the wrong BIOS so get with the computer manufacturer, and speak to a representative to confirm that they are appropriate for your system AND your version of Vista) then by all means install it and see if that solves the problem.  You can also get the updated drivers for the motherboard manufacturer, at the same time and see if that helps as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Where are located the USB ports?

  I think to buy the G60-216EM, but I was just wondering where the USB ports are located, because there is no 360 degree view of the laptop.

  Thank you

  There are 2 USB ports on the right side of the laptop and 1 USB port on the left side.

  I hope this helps.

  Pete

  BTW...

  At the top of this page, you will find a search. Enter the number of the model of the computer and press to enter. This will take you to the support page where you can download the manuals for the laptop you want. You can read and get a pretty good handle on where everything is.

  Have fun.

• Where are the Ports USB 3.0 of my HP Pavilion dv6-6158nr Notebook?

  I am unable to find the Ports of USB 3.0 on my HP Pavilion dv6-6158nr laptop.

  Please tell which side are these ports and how to get the maximum speed out of them?

  Hi Hanazir,

  You'll love this.

  Get a bright light and shine on the left side of the laptop.

  Now, get a magnifying glass and look carefully next to the USB ports.

  3.0 ports are marked with the logo 'SuperSpeed '. "SS".

  Similar to this, but very, very small!

  

  To get the maximum speed, use only with devices usb 3.0 - external hard drives, USB sticks, etc done to run with this technology.

  There is no harm in using the USB3 ports with usb devices 2.  In most cases, USB 2 devices work as expected when connected to a USB 3 port.  There are rare cases where the USB 2 device may not work when it is attached to a port USB 3.  Before you accuse the laptop / desktop or even the port and if your laptop don't not have a USB 2 port, then consider to plug a USB 3 hub that supports one or more USB 2 ports and try that.  A few specialized 2 USB devices require USB 2 connection - deal with it.

  Dragon tips

  USB 3 external drives: offset connection, more or less depending on your hub, your hardware and your player can add up to an unacceptable delay when you use a USB 3 hub in conjunction with port USB 3.  Huh?  Unless absolutely necessary, do not use a USB hub 3 with an external drive USB 3 - connect the USB 3 drive directly to your 3 USB port on the computer.

  Other usb devices 3 work well on the SIIG 7port USB 3.0 / 2.0 Hub - this is a very nice quality, IMO and is supported by its own power supply.  Nice.

  It's my pleasure to help.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• Satellite U400 - two of the three USB ports are not working

  Hello

  I have laptop Satellite U400 who has three USB ports.
  One of these 3 ports does not work correctly and the other two ports do not work.
  Is there anyone to show me any solution?

  Thanks in advance,
  Concerning

  Any solution? You mean a magical solution? :)

  No one knows the configuration of the laptop.
  No one knows what OS you are using.
  Nobody knows what you did last time with your laptop.
  No one knows how long you have this problem.
  No one knows what are the USB devices that you use to test USB functionality.
  What you have already tried to do about it?

  You want to have more questions?
  Maybe you should write more than three short sentences as a description of the problem.

• want to 810-430qe CTO: 810-430qe CTO... of the usb ports 3.0 and 2.0 ports, which are which?

  computers HP do not seem to come with a simple explanation of usb port scheme and since there are a dozen of them, I would like to know precisely which are which?    Help, please...

  Hello @mikesoares,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I read your post on USB ports and wanted to help you!

  USB 2.0 ports are black while the USB 3.0 ports are blue.  Please see the picture below, which shows the ports at the back of your desktop:

  Figure: Kaili2 back i/o ports

• Error when the USB ports are empty: "USB device not recognized".

  Original title: get popups for error USB malfunction even if nothing is plugged into one of my USB ports

  I get this error message appear several times on my computer hp laptop with Windows Vista Home Basic: USB device not recognized. One of the USB devices attached to this computer has malfunctioned and Windows does not recognize him

  But I have nothing in my USB ports! They are all empty. I removed everything. Nothing can stop this popping up every 15 seconds. I tried to uninstall all USB drivers in Device Manager, but this thing keeps popping up. Please help me. When I plug in devices to my USB ports, they always seem to work properly. The error message appears totally disconnected the actual functioning of one of my devices.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Try running this fixit and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  It will be useful.

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

• Where are the front USB ports on the HP Envy Desktop 700-210?

  I bought the 700-210 office envy because he has so many USB ports.   However, I can only find 8-2 on top and 6 on the back.   According to the specifications, there are supposed to be some at the front.   I have to take something out to find them?

  Thank you.

  V.J.R.-Savannah, welcome to the forum.

  Here is the Product Specifications page for the computer.  If you look at the picture of the computer in the link, I think the cover under the red band to slide down to expose the USB ports.  This is how it works on my 810-135qe want.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Where are all the USB ports on a TouchSmart all in one? I can only find 2 on the left side

  I have a HP TouchSmart all in a (1315xt-600) and can find 2 of the 5 USB ports.  There are 2 located on the side left of the screen, but cannot find the other 3.  Anyone know how to access?

  paula407 wrote: thanks a lot for the info.  Another question, about the description I got for my computer, it say I: 6-in-1 memory card reader, 5 total USB, audio.   That's why I thought I had 5 USB ports.  Can you explain what that means?

  Hello paula407, the 6 in 1 card reader shows there: cards 6-in-1 Reader + 2 USB + 1 taken line-in

  This suggests that the card reader has only two USB ports on the front of the system and the other USB ports would be on the back or side of the system.

• The Device Manager on my Windows box lists a hub USB 3.0 as one of USB controllers. This means that one or more of the USB ports are capable of 3.0?

  I recently bought a backup disk says he would run faster is it my 3.0 instead of 2.0 USB ports.

  Just try to understand the computer itself, if one of the 8 USB ports on my desktop Dell (Windows 7, 64-bit box) is capable of USB 3.0.

  Hi John,.

  The message that Windows gives is Windows telling you put a USB 3.0 device in a USB 2.0 slot and the speeds will be Cap using USB 2.0 footrest.

  If you are looking for your system on the website of Glens, it should tell you if one of the USB ports are 3.0 or not.  I think that USB 3.0 is marked with the blue wire around the ports.

• All usb ports not working does not correctly and the video card are not available with DVI cable

  I recently had a power surge and now none of my usb ports are usable, and I had to switch to analog cable to use my monito., also using the beside picture dvi hdmi cable sparkles.   The Device Manager shows everything works and the appropriate drivers are installed. IM using windows 7 with an asus motherboard P5nesli. IM pretty computer savy but it left me speechless. Cannot connect wireless mouse or keyboard, camera, printer, etc.  truble shooter says that it detects problems but wont tell me what they are and can't fix. Help... Thank you

  Hello

  What is the brand and model of the computer?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Uninstall all the USB controllers, download the latest USB driver on the computer manufacturer site, install on your computer and check the status of the issue.

  Remove and reinstall all USB controllers.

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Method 3:

  Update your drivers chipset system to the manufacturer's website and check the status of the issue.

• The usb ports are 2.0 on a HP 9280 e t computer?

  HP Pavilion e 9280 t running windows 7 64 bit

  All your USB ports should be 2.0, unless you have a USB 3.0 add-on card. Your card motherboard page shows 4 USB 2.0 ports on the back and 6 x 2.0 internal headers on motherboard where front USB ports and card reader are usually plugged.

  http://support.HP.com/us-en/document/c01901210