Upgrade to the controller of the 5500 series

Similar Questions

• Install the HP software for the 5500 series all-in-one Macintosh

  I reinstalled the software all-in-one HP 5500 on Mac OS 10.6 running, and now I can't print.   I uninstalled the software from the CD and re-installed but not luck.

  The printer was working before, but I have reinstalled the software because the ferry did not work when scanning documents.

  When I try to print nothing happens and when I go to print queue shows the document and status is listed as "error" with no further details.

  I can print a test page.  When I try to scan (from the all-in-one), I can see the scan on my screen but cannot open the document (pdf) and it is said that something is wrong with the scanned document and that some software is missing for the printer.

  Download and install this: support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Upgrade of the 5000 series processor Laptop Inspiron 15

  Hello!

  Can I put my Inspiron 5558 with a quad core CPU? If so, with what has been tested?

  Concerning

  Although there are versions of this expedition of model with quad core CPU, a few considerations:

  The CPU is soldered to the system board, so the card mother set must be replaced to upgrade.  This has two consequences:

  1. it's expensive - think more of 50% of the initial cost of the system, and

  2. it cancels any warranty remaining on the system.

  With anything other than the very high quality of our days laptops, the CPU is not extensible - except for one very little other high-end work stations and games books, half-bridge processors that can be upgraded are a thing of the past.

• WCS vs controller license Question - 5500 series.

  In the center of WCS license, there are two sets of licensing options: WCS and controller. Should I understand that:

  -Number of licenses WCS is APs how can be monitored by WCS?

  -Number of licenses controller is APs how can be connected to a WLC?

  Thank you!

  -Robert

  Hello

  Here is the link that gives you the different types of lisence WCS that are available...

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html

  and on the lisence 5508, you are right...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Upgrade path 5500 series ASA-SSM-10

  Can anyone provide the proper for the 5500 series ASA-SSM-10 upgrade path of

  6.0 (5) E2

  TO

  7.1 (10) E4

  The release notes state that you must run just least 6,0000 e4 could so I just spend 6,0000 E4 5,0000 E2 then directly to 7.1 (10) E4?

  Also, the SSM-10 is able to effectively run the 7.1 (10) E4?

  Hello

  Yes, you can directly upgrade 6.0.5E2 to 6.0.6 E4 and then directly to version 7.1. (10) E4. After the upgrade for the latter, you might even go to latest available patch as well.

  -Yes, SSM1 - is able to effectively execute the 7.1.0E4.

  Kind regards

  Akshay Rouanet

• Hi, I bought a CS.5.5 in 2011 and an upgrade to CS6 in 2013. Now on my Adobe ID I see only the serial number C5.%, but I need the number of the CS6 series. You want to do?

  Hi, I bought a CS.5.5 in 2011 and an upgrade to CS6 in 2013. Now on my Adobe ID I see only the serial number C5.%, but I need the number of the CS6 series. You want to do?

  Hi Janine.

  Please check the help below document:

  Quickly find your serial number

  In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts

  Kind regards

  Sheena

• I just bought an upgrade for the 14 items.  I downloaded it, but when I try to activate it I need a serial number.  When I connect to my Adobe account and follow the links, there is no information on my account on theproduct so no naked series

  I just bought an upgrade for the 14 items.  I downloaded it, but when I try to activate it I need a serial number.  When I connect to my Adobe account and follow the links, there is no information in my account on the product so no serial number.  Can anyone help?

  When you purchase a download you will be emailed a serial number... did you receive your email?

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

• Hi, thanks for making me signed in - finally. Now, after the upgrade to the latest Firefox, I can not play videos. Addons & pluginns all turned on and up to date.

  Hello
  I was struggling to connect to the support site yesterday and while this problem has been resolved, I was advised to upgrade to the latest version of Firefox from the system noticed that I was using an old. I was using Firefox 33 without major issues or problems at all. However I went ahead with the update, which gave me the 34.0.5 version. If good so far until what I went to play some of my regular TV series, I had followed with the previous version, only now he would not play at all.

  I know these TV series, comming from abroad might contain some harmful content to my machine or others, but I am well covered and as I say earlier they were playing fine in the previous version of Firefox. Just earlier the same day.
  

  I will be grateful if you could throw some ideas in this.

  Concerning

  J.Verano

  HI Juanverano,
  Is not a problem, Mode safe mode disables acceleration addons and hardware. If this continues and it is not an add on what will be the next step to try to disable acceleration:

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options (Preferences on Mac or Linux) as follows:
     • In Firefox 29,0 and above, click on the menu button

       

       then select Options Preferences on Mac or Linux, or Windows.

     • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Satellite P100-103: upgrade of the Core 2 Duo processor?

  I bought it is model and I thought to change the processor in a C2D. I just wanted to know if it is possible or not...
  BTW ive seen a P100 with double HD or something I want to know if it is possible with mine or I just read wrong '-_-

  Thanks in advance

  Hi Filipe

  Generally, the upgrade of the CPU is not very easy on laptops and undesirable. In my knowledge Toshiba doesn't supports CPU upgrade and you will lose the warranty if you open Notepad.

  As far as I know the microprocessor used in the Satellite P100 series (Intel Platform) will be different by the model.
  It supports the following processors:

  Intel Core Duo T2300(1.66GHz); T2400(1.83GHz); T2500 (2 GHz); T2600(2.16Gz); T2700(2.33Gz) FSB: 667 MHz

  Intel Core Solo T1400(1.83GHz); T1300(1.66GHz); FSB: 667 MHz

  Intel Celeron-M (Yonah core based) 410; 420; 430; FSB: 533 MHz

  Hope I could bring this matter to light.

  Good bye

• Satellite A-C55-1N1 - upgrade of the network cards

  I have a Toshiba Satellite C55-A-1N1 running Windows 8.1 and want to update the NETWORK Ethernet card both cards Wi - Fi, with the upgrade of the most important Ethernet card.

  Current card Ethernet installed (by Device Manager) is Qualcomm Atheros AR8172/8176/8178 PCE - E Controller Fast Ethernet (NDIS 6 h 30). I would like to move to GigaBit Ethernet.

  I don't want to disassemble the laptop to determine the size of the current map before obtaining beforehand a replacement (to avoid repeated disassembly). Can someone please help with the details of the existing card (for example what size/connections) and what other cards would be compatible to use to reach GigaBit speeds, if indeed this is possible?

  Map current WiFi installed (by Device Manager) is Qualcomm's Atheros AR956x wireless network adapter. I would like to be able to also connect at 5 GHz...

  As with the Ethernet card, I would get a compatible card before dismantling and would ask the same questions. I also understand that I would need 2 or 3 internal antennas to reach faster speeds of the WiFi. Can someone advise please on existing maps, maps of appropriate replacement and on the issue of the antennas.

  Thanks in advance for any help and advice.

  Due to specific design material update on laptops is very limited and supported. Support is upgrade RAM or HARD disk. It's nothing more than that.
  You can find a list of compatible RAM memory modules to upgrade. HDD or SSD upgrade is not problematic and, on most portable models, it can be done by the owner of the laptop.

  All the other hardware upgrades are not supported. I do not understand that you want to use the material with the best specification but that should help you with this?
  > Can someone please help with the details of the existing card (for example what size/connections) and what other cards would be compatible to use to reach GigaBit speeds, if this is indeed possible?
  These info, you can get the laptop to the manufacturer or an authorized only, partner, but they will tell you the same thing I have already written.

  My advice to you: do not disassemble the laptop on your own. In a first time the valid warranty and secondly, you can damage something.

  At the end one, may be stupid, the question: what is the problem actually? Is your machine so slow or what? I mean in particular the LAN connection. It must be OK.

• SL510 crashed in the middle of the upgrade of the BIOS.

  I had to reinstall the operating system (Windows 7) using my rescue disks after that my computer has been infected by a virus. The re-installation went well and I went to download a series of updates through Windows Update. I also did a few software updates via the tools of Lenovo. While it was the upgrade during the night, apparently he hung on the BIOS upgrade and did a variety of noises so my wife am bored off the computer. Now I just get a black screen when I turn on the computer. The hot spare no longer work. I also tried the BIOS boot CD (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013595) and who did nothing no more. Any suggestions?

  
  

• dv7t-2000: upgrade of the motherboard and processor for dv7t-2000

  I currently have a dv7t-2000 with [email protected] and ATI mobility Radeon HD 4530 discrete graphics with 512 MB dedicated memory.

  I want to upgrade the processor and the motherboard to improve its performance and its Windows experience index (lowest value is the graphics card with destop performance for windows aero).

  My question is

  (1) are the best processors listed in the manual dv7t as Intel Core 2 Duo T9800 2.93 GHz parts 507951-001 and other compatible.

  (2) can I replace the current Board system with ATI Mobility Radeon HD 4650 discrete graphics with 1 GB dedicated memory?  What is the difference between parts # 516294-001 516293-001 against?  The two identical descriptions a.

  Is it useful to upgrade (i.e. it would improve windows performance index)?

  Is it easy to replace the motherboard?  All the specialty tools?

  Thanks in advance for your help.

  The dv7 series is a challenge even for experienced laptop technicians. There are several boards of sup and ribbon cables going in all directions. The T9800 will agree and will work on any one of the motherboards in the manual that you apparently (let me know if not) and will greatly increase the WEI on the processor. She is always equivalent to most of the i3 processors.  The HD 4650 is going to be a pretty big improvement on the HD 4530. But that's like saying I'd rather have a 1964 Chevrolet as a 1953 Chevrolet... nor is technologically current as for video cards go. Current demanding games will exceed the 4650's powers.

  http://gpuboss.com/GPUs/Mobility-Radeon-HD-4650-vs-Mobility-Radeon-HD-4530

  I checked partsurfer for two motherboards that you list and I checked the manual. There is widespread confusion. PartSurfer lists the jury 294 as a "UMA" or integrated graphics subsystem, and lists the 293 Commission that the use of dual core AMD processors. Something is not good and frankly I would waive the exchange of motherboard, but if you really want to try let me know and I'll try to clear up the confusion.

  A T9800 is about $35.

  http://www.eBay.com/ITM/Intel-Core-2-Duo-T9800-dual-core-processor-6M-cache-2-93-GHz-1066-MHz-SLGES-/271748016941?PT=LH_DefaultDomain_0&hash=item3f4571ab2d

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Upgrades of the firmware and NVSRAM on two controllers MD3200

  I have a double MD3200 controller (more an enslaved MD1200) which is currently running firmware v07.70.06.63 and NVSRAM vN26x0-770890-005 and I need to upgrade the firmware so the NVSRAM to take advantage of some new features.  I'm also about to implement the level of High Performance and another level of MD1220 storage.

  Wondering if anyone has experience of firmware and/or NVSRAM upgrades on the controller device double MD3200?

  Read the upgrade notes, it seems that it should be possible for me to update without having to close my VMs, however I think that is too optimistic.  So I intend to a failure of the systems, stop the virtual machines, and then upgrade and restart all virtual machines, once the firmware is updated and the storage Bay is visible from my ESXi hosts.

  Any ideas or experiences that anyone can share?  e.g. I need to reboot physically (market power) storage arrays?  I was hoping to do most of the work of the House and I would like to avoid having to attend physically on the site, if I can.

  I did it at home... (MD3000i)   Make sure that the machine you are remoting in with MDSM on it does not work out of storage.   I made this error only once.

  I leave the ESX / ESXi hosts running but stop the virtual machine.   Controllers to recover, as basically powercycled by day, I can't believe that all VM would survive through that if left turned on.

• HP 990 cm print is no longer the color since the upgrade to the new iMac with Mountain Lion

  Have an older CV (990c, m series) which worked fine on my iMac Leopard PPC (X.5.8) running.

  Since the upgrade to the new Intel iMac running Mountain Lion (the most recent software upgrades / w X.8.2) this printer will print only in black and white, despite having new color and cartridges inkjet black installed - even the test pattern that prints automatically when I changed the print cartridges only in B & W.

  The detailed print dialog box that appears when I try to print a color page does not include the usual option to print in color.

  I think that HP is no longer provides this older printer drivers but guess they are in the software updates in Mac OS.

  Someone has an idea how I can fix it, or is it just time to recycle this printer and buy a new one?

  TIA

  Caroline

  Hello

  The most recent is available in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=61686

  Probably time to buy a new printer.

• HTP.p does not like usual after upgrade to the apex 4.2.6

  Hello everyone,

  We have recently upgraded the Apex 4.0.2 on Oracle 11 g using Embedded PLS door of entry to the Apex 4.2.6 on Oracle 11 g using ADR.

  The initial series of unit tests seemed well until a few questions supported around "htp.p".

  The scenario is like this:

  1. the user fills some fields on the page-10 and click the Save"" button.

  2. This button then performs a redirection to a pop up page where some inputs more are invited to enter.

  3. when the user clicks "OK" on the popup:

  i. an anonymous PLSQL block is executed in the backend (as after presenting processes).

  II. another PLSQL block is executed, which closes the popup windows and returns the control to the parent page.

  This is achieved using htp.p...

  For example:

  HTP.p ("< body > '");

  HTP.p ("< script type =" text/javascript "> '");

  HTP.p ("var alertMsg =" &. P38_PO_AMOUNT has been paid";");)

  HTP.p ('javascript:Alert (alertMsg)');

  HTP.p ("window.opener.location.href =" f? p = & APP_ID.:7: & SESSION.) " ;") ;

  HTP.p('window.) Close (this);') ;

  HTP.p ("< /script >" ");

  HTP.p ("< /body >" ");

  The anonymous block under step 3.i. is well executed and done what it takes in the backend.

  Its the next step which is driving me crazy, I tried to add debugging but to no avail.

  The weird part is that the message "& P38_PO_AMOUNT. has been paid' getting appears on the pop-up itself instead of parent.

  Any ideas or pointers to this problem would be a great help. I have come to the forums and metalink for any position and had no luck so far.

  Kind regards

  Madhu.

  Hi Sunil,

  Thanks for the reply and apologize for the delay in responding.

  But 2 doubts which do not appear in your code:

  1. why you placetag through PTH again? Body will be already present on the page 7

  2. What is "this" in your window close event? 'this' will be indefinite in my opinion

  Thetag and the reference to 'this' was used because the application was developed first on Apex 3.x

  This piece worked through the upgrade to 4.0.2 and it starts to play up only after this upgrade (to 4.2.6).

  I had followed the suggestions from the link you posted, made some changes and the flow is as follows:

  1, as well as the original

  2 as well as the original

  3. when the user clicks "OK" on the popup:

  i. an anonymous PLSQL block is executed in the backend, under process, like submit it: after calculations & Validations.

  II. the 2nd block PLSQL for close & redirect the page is now part of 'Branch of PL/SQL procedure' with branch point ' on Submit: after the treatment (after calculation, Validation and treatment). The PLSQL code is as follows:

  BEGIN
    htp.p('');
  END;
  

  The behavior is always the same and seems not to have changed. I'm a little lost, try different options.

  I'll try to reproduce the scenario on apex.oracle.com and in the meantime of inputs/suggestions would be helpful.

  Kind regards

  Madhu.