The effects of roll and Compositions

Similar Questions

• The effects of roll and breakpoints

  Muse is to say "your page must use a fixed breakpoint for you to use scrolling effects" (or something like that, it's a rough translation from Dutch)

  How to use the scrolling effect, because I have 6 break points.

  Please let me know

  u can not use scrolling effects with a grid of (sensitive) fluid at the moment. Effect of scrolling, you need a fixed layout. (If you sometimes get wrong with your translation language, just try English version maybe)

  fixed layout only = no breakpoints

• Help with effects of roll and radio button

  I searched the forum help and google and have not yet found an answer. Somehow I am trying to add a bar of menus with an option to sign up to a mailing list, I built bar and every thing becomes opaque number of specific pixels, however I can not understand how to apply the effect to scroll to the option button. the check mark opacity isn't check-able. If I missed a previous post or some info on this, it would also be a great help to be headed in the right direction.

  You can settle scroll to only button but the form itself. In the fill option, you can apply opacity.

  Thank you

  Sanjit

• How to download the effect of 'S_Grid' and 'S_Shake' effect?

  I started a new channel on youtube and I started to edit an intro and I preferred to use after effects, but I ran out of effects, it gives me this message

  «After effects warning: this project refers to the missing effects.» Please install the following effects to restore these references.

  2 the missing effects.

  (1) ' S_Grid '.

  (2) ' S_Shake '.

  Looks like you're downloading and/or installation of the academic version.  It is sold at a reduced price, but requires that you send proof of eligibility.

  GenArts support should be able to help with the installation of the trial version.  If you choose to buy it later, they also help you get the right version for you.

  -Warren

• JSF - lack of source code using the creation of models and composition

  It's really strange, or maybe I don't understand JSF.
  
  Supposedly to make the long story short, I have the following:
  
  a. masterLayout.xhtml file - primary model
  b. file myPractice.xhtml - compositions that uses templates to file masterLayout.xhtml
  
  masterLayout.xhtml page go to myPractice.xhtml (using ajax). The myPractice.xhtml rendered correctly - shows all components of the model and its own page. But when I check the "see source code page", I see the source code of masterLayout.xhtml.
  
  Here is the part of the source code:
  
  IMPORTANT NOTE: masterLayout.xhtml has a COMMANDBUTTON RICHFACES (a4j:commandButton) WHICH RENDER THE PANEL ID "MyPractice" FOUND IN myPractice.xhtml. Means that this rendering of the page via ajax commandButton control.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  masterLayout.xhtml (model)
  
  :
  < a4j:commandButton styleClass = "#{control.myPracticeStyle}" value = "MY PRACTICE" action = "myPractice' actionListener =" #{control.myPracticeAction} "make = 'myPractice' / > '.
  :
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / >
  < name ui:insert 'content' = >
  < / ui:insert >
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / h:form >
  
  You can see the ui: insert above.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  myPractice.xhtml
  
  "< ui:composition template="/templates/masterLayout.xhtml ">
  
  < ui: set name = "content" >
  
  < id rich: panel = "myPractice" style = "height: 764px; border: 0px; padding: 0px; ">
  
  < table width = "100%" border = "0" cellpadding = "0" cellspacing = "0" >
  
  < b >
  
  < style td = "width: 100%;" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" >
  
  < f: facet name = "header" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" columns = "5" columnClasses = "overviewTabColumn, aumTabColumn, feesTabColumn, cashFlowTabColumn, emptyTabColumn" >
  
  < a4j:commandButton styleClass = "#{control.overviewStyle}" value = "OVERVIEW" action = 'Preview' actionListener = "#{control.overviewAction}" make = 'Preview' / > '.
  
  < a4j:commandButton styleClass = "#{control.aumStyle} ' value = 'AUM' action = 'aum' actionListener =" #{control.aumAction} "make = 'aum' / > '.
  
  < a4j:commandButton styleClass = "#{control.feesStyle} ' value = 'FEES' action = 'fees' actionListener =" #{control.feesAction} "make = 'fees' / > '.
  
  < a4j:commandButton styleClass = "#{control.cashFlowStyle}" value = "CASH FLOW" action = "Cash Flow" actionListener = "#{control.cashFlowAction}" make = 'Cash Flow' / > '.
  
  < h:outputText value = "" style = "width: 100%;" / > "
  
  
  < / h:panelGrid >
  
  < / f: facet >
  
  < / h:panelGrid >
  
  < table >
  
  < /tr >
  
  < b >
  
  < td > < table >
  
  < /tr >
  
  < b >
  < td >
  < name ui:insert 'subContent' = >
  < / ui:insert >
  < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / ui: define >
  
  < ui:composition >
  
  This set define supposed to go in the ui section: masterLayout.xhtml insert.
  
  ===================================================================================================
  
  Source of real "see Page" FireFox or IE when myPractice.xhtml is made and displayed.
  
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / > < = missing source code?
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < / div >
  < div >
  
  "< input type ="hidden"name ="javax.faces.ViewState"id =" javax.faces.ViewState "value ="-2088890247043631074:-2632132869735171398 "
  AutoComplete = "off" / >
  
  < / make >
  
  < / body >
  
  < / html >
  < / ui:composition >
  
  If you look at this "source code" view Page"carefully comparing to masterLayout.xhtml, from the height: 780px, you will notice the name of ui: insert section = 'content' is... empty.

  When you "view source" you made an another GET, that renders the page in its original state. It is not the source as it is currently displayed for example after a button push.

• Points not react properly, conflict with the effects of anchor roller?

  I am slowly building my site with Muse for my new business, I started a couple of months. I used the 'Influence' model as a framework and used scroll on each section for them effects turn out to overlap as the page scrolls.

  Unfortunately I can't get the anchor points to work, I have them positioned at the top of each section accordingly and them associated with the buttons on the top, but when you click it, the page scrolls where they are. I guess it's some kind of conflict between the effects of roll and anchors. If someone has any advice how it can be fixed it would be greatly appreciated!

  Try to check the position of the pins on the content, scroll with anchor should work if the content is well aligned with the anchor point.

  Thank you

  Sanjit

• Problems using effects of roll with the last update.

  I'm new on using effects of roll and just got the hang of it when Adobe released the last update. Now, I get the message "To enable scrolling of the effects, your page must use a unique fixed stopping point" I use a single fixed stopping point and still get this message. I want to make a single page Web site scroll with multiple layers moving on the other, but with this last update I can not get my scrolling effects to accept any acceptable layout to activate the effect.  Can someone tell me what I am doing wrong?

  Help, please!

  Hello

  Please refer to my suggestions in the link below.

  How to activate the scrolling of the effects

  Kind regards

  Vivek

• The effect of ICT controls runs off the screen and the chronology of control carried out does not follow

  I'm working on a video where I need to change the image very close key pairs. But it seems that ICT is running off the screen and does not follow along as the ICT in the project timeline.

  How can I make the effect controls, ICT and the timeline synch upward? I can use previous and next keyframes, but the view of the timeline does not follow along. He made the process quite slow editing because I have to constantly to the scroll box allows to adjust the view manually.

  There is no option for this scroll.  You will need to zoom out.

• How can I activate the scrolling of the effects? I get "to activate scrolling effects your page must use a unique fixed stopping point." How can I do this?

  I have tried several things to enable scrolling of the effects, however, I can't seem to make it work. I get the message ' to activate the effects of scroll your page should use a unique fixed stopping point. " How can I change this so that my tab scroller are available? It's my first week using Muse, so I am very familiar with the software.

  Thank you!

  Hello

  is that you have already looked at working on the site so please be sure 2 things to activate the effects of roll for the site.

  1. There is only a breakpoint in the page as shown in the screenshot below.

  

  2 right-click on the breakpoint bar and select 'Breakpoint properties' and select 'Fixed width' instead of liquid.

   

  In case you are starting from scratch then be sure to select 'Fixed width' at the time of the creation of the new site.

  

  Kind regards

  Vivek

• Linking multiple effect layers of several compositions such as controlled form than a composition adjustment

  Hi, I'm working on a black and white colorization project video. I have 25 compositions that have 5 or more in adjustment layers with scale effect colors and each 1-5 layer masks on it.

  I want to link all adjustment layers with the same effect of each composition from a just publication. For example I have adjustment layer for hair or a suite which must bee of same color in all 25 precomps, and when I want to change the color of hair or a suite, to spend it comes a model and do not have true all 25.

  I tried copy property links layer technique but no luck it do not work but it applies to the whole layer and not simply masked aria.

  Any help please.

  You can attach controllers to layer in other compositions by naming the compositions. An expression controlling another layer in the same composition would be initially thisComp.layer ("layer 1"). If the layer that you want to control was in another publication the term would begin to comp("Comp_1").layer {"layer 1").} You can link the layers of a model of layers in another comp, by separating the timelines and then just using the Pickwhip to drag from one property to another. If you have configured a layer in your master comp with a bunch of controllers effects you can lock the effect controls panel, and then use the Pickwhip do to drag the property that you want to control to the controller. This would give you something like this: comp("Main Comp") .layer ("controller") .effect ("Slider Control") ("Slider")

  If you do a lot of them it's a really good idea to implement a good naming convention.

• Overview of the effects of Lumitri before applying

  I have an account with Lynda.com in one of their tutorials, they are clicking on the effects of Lumitri and it will automatically show a preview on the video clip highlighted so that it is applied. All mine I get to see the effect after I made a request. Is there a setting somewhere to allow preview?

  Between the application of the predefined settings, it uses cmd + z/ctrl + z, which is the shortcut for undo.

• How can I get the effect of morphing on first pro?

  I plan to move to first pro, and I´d like to test it for a month.

  I've also seen the results on the effect of morphing, and I'm pretty impressed, I´d would like to try that on a current project.

  If I buy the first pro for a month, will I have access to use for this purpose?

  Do you mean Morph cut? If so, it is not in the current version of first. It will be in a future release.

  FYI, you can always download the trial version which is good for 30 days. Video editing software | Free download Adobe Premiere Pro trial CC

• Add/Remove the effect with CSS

  Hello

  I'm trying to implement some sort of entry in my application validation. I expanded TextField to accept only the entry with a number of characters and corresponding to a regular expression. When the regular expression match falls, I want textfield to have an innershadow, and he does. However, the effect is not removed when I remove the CSS class where this effect is defined.

  setOnAction(new EventHandler<ActionEvent>(){
              @Override
              public void handle(ActionEvent e) {
                  if(!getText().matches(restrict.get())) {
                      getStyleClass().add("invalid");
                  }
                  else {
                      getStyleClass().remove("invalid");
                  }
  
                  for(int i=0; i<getStyleClass().toArray().length; i++) {
                      System.out.println(getStyleClass().toArray()[i]);
                  }
              }
  

  .text-field.invalid {
      -fx-border-color: indianred;
      -fx-effect: innershadow(gaussian, indianred, 5, 0.5, 2, 2)
  }
  

  The style class "invalid" appears in the table when the entry is not valid. The class is removed successfully, but not the effect. How can I fix it? Do I need to set the effect in code and no CSS?

  Have you tried this:

  .text-field.invalid {
      -fx-border-color: indianred;
      -fx-effect: innershadow(gaussian, indianred, 5, 0.5, 2, 2)
  } 
  
  .text-field {
      -fx-border-color: indianred;  // change to some other color maybe transparent or use null
      -fx-effect: null
  } 
  

  Could be he you pls tell me how to use the CODE tags.

  Post edited by: jojorabbit

• The effect name help

  Hello

  I have a problem with AE CS 6.

  I drag and drop random effects of palette effect and now I don't know what effect I used, and I see only the default options of materials.

  A tip how to see efect name?

  NikolaCoYoT wrote:

  I was hoping to have another solution, but some properties or something like that, some plug-ins will be good for Adobe.

  I think you're wrong understanding of a preset. You called him an effect in your first post, but a preset isn't an effect; It's a set of effects, keyframes, expressions, etc. that may be applied to the layer. It is not really something in itself. It's like copy and paste effects and keyframes of a layer to another. There is no reason (or need) to post a link to what animation presets have been applied to a layer, because you could have changed beyond recognition of the preselection of origin.

  You could make a preset that applies just a levels effect to a layer. When apply you it to a layer, and then click the layer, you will see the levels effect in the effect controls panel, and you can change as a result of regular levels because it is just an effect of levels. You can remove, change, etc. You can apply an animation preset to a layer with a bunch of effects involved, remove some effects, changing others, and maybe add a few effects more. Finally, he looked nothing like the original preset. How would he then linked to the original?

  I feel that I'm not explain very well, but maybe this page will help you understand.

• Scroll through the effects of the waves on the home page of Adobe Muse

  I'm trying to understand the parameters of slider for waves that are on the homepage of Muse http://muse.adobe.com.

  Looks like the waves are pinned at the bottom of the screen in some way (because they are always at the bottom of the screen no matter what size, I make my browser window.)

  Anyone knows what parameters of scroll, I can use to do this?

  Thanks for the help!

  Hello

  Basically, this is done by using images of different waves and scrolling effects application. You can select your image and then apply the movement of scrolling, scrolling settings correctly configured must so that rim, they must create the effect of wave and the position will be the same for all screens so he would not start from the same position for the browser, the site is consulted on.

  Useful links:

  http://www.Adobe.com/inspire/2014/02/scroll-Muse.html

  http://forums.Adobe.com/message/6070293#6070293

  http://www.YouTube.com/watch?v=eQo_k9WiLms&list=RDeQo_k9WiLms

  Thank you

  Sanjit