The Em one square space nonbreaking?

Similar Questions

• PC is slow and get the message insufficient disk space

  my PC is slow and I get a continious pop up indicating "you run low disk space on the local disk C:.

  What should I do?

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 5 and 10 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• start the server - means: PermGen space

  Version: WebLogic Server 10.3.2.0
  6 64 Sun JVM
  Windows Server 2008 64 operating system
  
  Hello
  I received the error message after a start of the managed server. The e AdminManager NodeManager instances are to the top and runnig and the comand of startup is done from the web gui.
  I tried to play with arguments JVM (web gui, not on script) increasing the amount of - Xmx1024m-Xms512m, but no success and because the instance does not have any application deployed I felt reasonable put them to-Xms512m-Xmx512m.
  
  
  < 13 January 2010 22:35:12 hours GMT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
  
  < 13 January 2010 22:35:12 hours GMT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
  
  < 13 January 2010 22:35:14 hours GMT > < opinion > < security > < BEA-090171 > < loading identity certificate and the private key stored under the pseudonym of DemoIdentity of the D:\ORACLE\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks jks keystore. >
  
  Exception in thread "[STANDBY] ExecuteThread: '1' for the queue:"(self-adjusting) weblogic.kernel.Default"" means: PermGen space.
  
  at java.lang.ClassLoader.defineClass1 (Native Method)
  
  at java.lang.ClassLoader.defineClass(ClassLoader.java:621)
  
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
  
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
  
  to java.net.URLClassLoader.access$ 000 (URLClassLoader.java:56)
  
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
  
  at java.security.AccessController.doPrivileged (Native Method)
  
  at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
  
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
  
  at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
  
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
  
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  ***************************************************************************
  
  Exception in thread "Timer 1" The WebLogic Server encountered a critical failure
  
  means: PermGen space
  
  Reason: PermGen space
  
  ***************************************************************************
  
  < 13 January 2010 22:35:27 > < FINEST > < NodeManager > < waiting for the process to die: 3624 >
  
  < 13 January 2010 22:35:27 > < INFO > < NodeManager > < server failed during startup, so won't be restarted >
  
  < 13 January 2010 22:35:27 > < FINEST > < NodeManager > < returned runMonitor, finished setting = true and notification servers >
  
  
  
  
  Thanks in advance for any help.

  Hello

  As you mentioned that you have tried to play with arguments JVM (web gui, not on script) increasing the amount of - Xmx1024m-Xms512m...

  In the case of exception OutOfMemoryError PermGen Sapace in... .increasing memory segment size does not solve anything.

  Just an explanation of Bit:

  Formula:
  (OS level) Size of the process = Java Heap Space Native (2-3% associated OS memory)

  PermSize: He is a native memory area outside the heap, where ClassLoading stuff happens... In an operating system like Windows size default process is 2 GB (2048 MB) by default (it doesn't matter how much RAM you have 2 GB or 4 GB or more)... until we do not change it by setting the OS level parameter to increase the size of the process... Usually in OS such as Solaris/Linux we get 4 GB process size as well.

  Now let's take the default process size = 2GB (Windows), now if you have set the - Xmx512M, we can assume that the rest of the 1536 MB memory is available for native code.

  (ProcessSize (-) HeapSize) native = (+) (2-3% associated OS memory)
  2048 MB (-) 512 MB = 1536 MB

  RULES OF THUMB:

  MaxPermSize = (Xmx/3) - very special cases (one third of the maximum size of a memory segment)
  MaxPermSize = (Xmx/4) - recommended (a maximum segment size fourth)

  So finally, you need to increase the size to PermGen... like Xms1024m-Xmx1024m - XX: MaxPermSize256m

  But again, these aren't the final values... Depends on ther environments

  Thank you
  Jay SenSharma

  Published by: Jay SenSharma on January 14, 2010 17:36

• Is it possible to buy the new watch by selling the old one?

  Is it possible to buy the new watch by selling the old one?

  Hello

  Apple Watch is not currently in the Apple recovery / recycling program.

  You can consider selling your old Apple Watch private, perhaps through a site like eBay.

• Am I the only one to have a problem with the zoom is constantly disabling feature?

  Running iOS on a 6Plus 9.3.3, I continue to turn on zoom and nearly every day he himself turns OFF. Am I the only one experiencing this bug?

  I have not read this "bug" here before, and I read these forums almost every day. I don't know what to offer another standard "fixed".

  Force restart. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  The system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

  If the steps above do not help, you may need to test in an Apple store.

• I have four e-mail accounts, but evil is at the top of the list. How to change things so that the fourth one can become the first?

  When I run Thunderbird, the same as that of my four accounts/E-mail addresses is always at the top of the list. However, over the years, I added three other e-mail addresses, and I would like the newest one is the default address at the top of the list. How can I change the order of the list so that my recenty added most e-mail address becomes the top of the list the default?

  Install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/

• My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  If there is no email from the old account that you want to keep, move them in local directories first.
  Tools > accounts settings
  OR
  Right click on the email account in the fodler pane, and then select "settings".

  Select the account you want to delete.
  Click on "Actions account."
  Select 'delete account '.
  Click OK

  See the image as an aid:

• I accidentally created an email acct, how I remove to the newest one and not the former?

  Entally created an acct email, how do I remove to the newest one and not the former? And I get e just on the other.

  Play the 'e' (email?) to the old account first. You can drag and drop.

  To remove an account from Thunderbird:

  Tools | Account settings| < select the unwanted account > |

  Down at the bottom of the left pane, Account Actions , and then click remove account.

  Both accounts use POP? This could explain why new messages appear in the new account, but not the former.

  It might help to post your Thunderbird settings data: Help. Troubleshooting information. Clear the checkbox "include account names. Click on "Copy text to the Clipboard", then paste (ctrl + v) into your next post here.

• My last computer was stolen. The only one remaining of my iTunes is on my iPhone. How can I transfer to my new computer?

  My last computer was stolen. The only one remaining of my iTunes is on my iPhone. How can I transfer to my new computer?

  Follow the steps in this Article to Apple Support

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• FoxTab 1.4.9 has stopped working again? 24 of Firefox, Flash player 12. Was I the only one?

  Foxtab empty empty screen when I open foxtab. Reinstalled Firefox 26 and downgraded to flash player from 12 to 11. Running Windows 7. Although I'd be able to find this recurring latest online fix, but after a week of waiting, I thought I should show my problem here. Maybe I'm the only one who has this problem? I've always been able to understand the cause with foxtab problems earlier, but this time, I'm puzzled. Foxtab using 1.4.9, Flash Player 12. I don't have a screenshot button on my keyboard but foxtab watch it's normal screen, some only of sites are on the screen and I can not add all web pages either.

  Hello, there is a new version available for the https://addons.mozilla.org/firefox/addon/foxtab/versions/ that apparently solves a problem with the latest version of the flash plugin.

  If the problem is still present later, please contact the developer of the addon directly via the channels of support to https://addons.mozilla.org/firefox/addon/foxtab/

• I need to locate the file one by one?

  Normally, I put the iTunes media files on my external drive. But recently, it connects more.

  When I try to recreate a link to it, all the music in my iTunes shows "!" and cannot be read. I need to locate the file one by one to make them available again?

  There are more than 2,000 + music in my playlist. Are there other ways to locate the whole folder at the same time?

  Thank you very much

  It should connect if he did in the past. is it possible that you renamed the drive or folder in the path to the iTunes media.  This, ny the way, is one of the reasons why we suggest to keep a whole library on an external media player only.

  If you find an iTunes file should offer to find others as long have you let iTunes organize media in the past.  If this does not work then probably something got renamed on the disc.

• AT &amp; T changed their design of the homepage, and I liked the old one. A way to create my own homepage in Firefox using modules for content that I prefer?

  AT & T changed their design of the homepage, and I liked the old one. A way to create my own homepage in Firefox using modules for content that I prefer? I liked the modules which gave me a variety of sources of news, finance, sports, weather, calendar, etc... It also allowed me to use a background of my own source. Finally, he allowed me to resize the modules I needed. I would like to be able to replace the new AT & T with my own homepage. Thank you.

  Maybe http://www.netvibes.com/

• I just need a tutorial step by step on how to move to the next upgrade, ex: 4.0 NOT to the newest one, thank you.

  I don't know where to go to get to the next level when the office is saying that the level I am sure will soon expire. Can I upgrade before its expiry, a new level NOT the newest one and how do I do it?

  Firefox 3.6 will probably be supported until April 2012. Firefox 4, 5, 6, 7 and 8 don't are not supported any longer, only 3.6.25 and 9.0.1.

• My previous photo library has now been replaced by the opening one. How to return to the photo library?

  When I double click on an Aperture library (the app is no longer installed on my computer) Photos repaired and opened it.  My previous photo library has now been replaced by the opening one. How to return to the photo library? Where at - it go?

  < re-titled by hosts >

  You should have several libraries - hold down the option key while launching Photos and check every library in the window select library - you should find the original it

  LN

• Tasks under glass? I know I'm not the only one...

  

  I just buy my Apple Watch 30/03/16 and today I noticed these green spots under the glass and they weren't there yesterday? I did not get the wet watch and it works fine. I have reduced transparency and makes the stains disappear. I'm the only one who thinks it's ok or acceptable? Why should I have to disable the option installed by apple to make the sleep function properly? I did some research and see that I'm not the only one that this has happened? Do I have to send the watch back for a new or what is happening for all watches Apple? I really like the watch I was wondering what everyone else thought?

  Hello

  It's perfectly normal - it is not a problem or an error.

  You are referring to an intentional visual effect that is designed to repeat the contents of the underlying screen.

  The effect appears every time that see you some screens that sit on top of the other, for example:

  -For displaying Notification Center (dragging down when you view the screen of the watch face);

  -For reading a notification;

  -For the opening of eyes (by sliding upward when you view the screen of the watch face).

  -By the use of Siri.

  The underlying mirror not precisely the content of the display function. Instead, it adds a blur effect / ghosts. It can serve as a subtle, useful reminder that you are viewing - for example - looks or Notification Center, each of which can be exited by sliding downwards or upwards on the screen.

  If you want to disable this feature:

  -On your iPhone in the app shows, go to: Watch My > general > accessibility - turn on / enable the setting to reduce transparency.

  This setting stops the effect to be shown on the display of your watch.