The ESXi 4.1.0 to 6.0 upgrade. -upgarde and best practices

Similar Questions

• to access the QML attached objects in C++ and best practices for the handling of the user interface in classes

  Hello

  I have in fact 2 queries

  (1) how can we access attachedobjects defined in QML in C++?

  (2) I'm loving development on Blackberry 10 C++ is one of my favorites. But I'm a bit lost when it comes to managing the user interface in classes. For example when we create the project through momentics we have a class called ApplicationUI. It manages all the (default) user interface commands, we in C++. as for example creating the document qml and setting as root user interface, etc. I am now working on an app that have NavigationPane as root, and then I continue to push pages (like the screens). But now the code for all pages is inside my ApplicationUI. What is the best practice to keep the UI for each page logic in a separte C++ class?

  I also develop for Android that a separate class for each activity, this code does not mingle for each activity. Please guide me how can I keep logic of user interface of each Page into a separate class of C++?

  regarding your second question:
  I think this is the simplest approach to keep all things in the UI in QML. You can easily put things into separate files.

  If you want to use c ++ to the user interface: can be done, too. just put it in separate classes and include those in your application class.

• Disconnect the Code: Andrejus VS VS VS Himo Duncan of other and best knockout!

  JDeveloper 12.1.2

  I'm trying to find the best journal / log for my application.  To do, I'm against the best minds of Oracle each other!

  My research has updated a number of different approaches, everyone would be able to offer the best solution.  I am a disconnection with OAM and there will be some magic

  code for this, but I found at least 4 different ways. Some may be dated.

  I am the security configuration based on the ADF security: authentication of Client HTTPS (Public Key Certificate) is the most secure login.

  https://community.Oracle.com/message/10490285#10490285

  What Code of disconnection can deliver the best knockout and Tris to 12 c? (or OAM).

  / / Corner one: ANDREJUS has its logout in connection http://andrejusb.blogspot.com/2010/11/things-you-must-know-about-ADF-faces.html

  < af:goLink text = "Logout" id = "gl1".

  destination = "/ adfAuthentication?" Logout = true & amp; "end_url = / face/hand" / >

  The magical Logout button.

  public String doButtonAction() {}

  / / doHimosLogoutSessionGo2Target ("http://intranet.xxx.edu/" "");

  / / doDuncansADFLogout ("http://intranet.xxx.com/" "");

  BuildLogOutURL();

  doLogOutADFAuthentification();

  LogOutCloseWindow();

  Returns a null value.

  }

  / / Two corner: Himo - made a session.invalidate () http;    / /https://community.oracle.com/message/9376812#9376812

  public String doHimosLogoutSessionGo2Target (String target) {}

  Place a button on the page and bind it to a bean method.

  There you invalidate the session and redirect the user to another page

  xxxUtils.logMsg ("Johnny", "isAuthenticated:" + isAuthenticated());

  ExternalContext ectx is FacesContext.getCurrentInstance () .getExternalContext ();.

  HttpServletResponse response = ectx.getResponse () (HttpServletResponse);

  String url = ectx.getRequestContextPath () + "/ www";

  HttpSession session = ectx.getSession (false) (HttpSession);

  session. Invalidate();

  try {}

  response.sendRedirect (url);

  FacesContext.getCurrentInstance () .responseComplete ();

  xxxUtils.logMsg ("Johnny", "isAuthenticated:" + isAuthenticated());

  } catch (IOException e) {}

  e.printStackTrace ();

  }

  Returns a null value.

  }

  / / In the three corner: Duncan is a /adfAuthentication? logout = true url (ok, it's a representation of java Andrejus link) / /https://blogs.oracle.com/groundside/entry/logout_with_adf_security_say

  {} public void doDuncansADFLogout (String toURL)

  ExternalContext ectx is FacesContext.getCurrentInstance () .getExternalContext ();.

  Get the Application context root

  LogoutURL StringBuilder = new StringBuilder (ectx.getRequestContextPath ());

  Add the fixed reference to the servlet security ADF

  logoutURL.append ("/ adfAuthentication?") Logout = true & end_url = ");"

  And your final destination goes here

  In this case an activity to display hard-coded but this bit would be variable

  logoutURL.append("/faces/login");

  And do the redirection

  try {}

  ectx. Redirect (logoutURL.ToString ());

  } catch (IOException e) {}

  xxxUtils.logMsg ("Duncan", 'logout problem');

  And add your choice of new diagnoses

  e.printStackTrace ();

  }

  }

  In the corner four ADF authentication servlet - this could be the representation of java code Duncan and Andrejus / /http://java2go.blogspot.com/2012/05/oracle-adf-with-sso-definitive-guide.html

  public void doLogOutADFAuthentification() {}

  xxxUtils.logMsg ("doLogOutADFAuthentification", "isAuthenticated:" + isAuthenticated());

  AuthenticationService service = AuthenticationServiceUtil.getAuthenticationService ();

  Orig String logoutURL = "/ home/face/jspx"; the end_url

  service. Logout (endURL, null);

  xxxUtils.logMsg ("doLogOutADFAuthentification", "isAuthenticated:" + isAuthenticated());

  }

  / / Five corner OAM SSO Logout that seems to appeal to the "global" disconnection which is part of the OAM

  public String OAMSSOLogout() {}

          // http://fortunefusionminds.blogspot.com/2013/07/how-to-perform-ssosingle-sign-on-logout.html

  try {}

  ExternalContext ectx is FacesContext.getCurrentInstance () .getExternalContext ();.

  ectx. Redirect("/oamsso/logout.html?end_url=/portal.html");

  } catch (Exception e) {}

  System.out.println ("ERROR:" + e.getMessage () + "while connecting:" + e);

  }

  return "return";

  }

  In corner Six

  Close the tab

  Work any.  farm tab, but if you have other tabs open, then go to the url of the application,

  You can go with no authentication.

  public String LogOutCloseWindow() {}

  xxxUtils.logMsg ("LogOutCloseWindow", "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");

  xxxUtils.logMsg ("Johnny", "isAuthenticated:" + isAuthenticated());

  try {}

  FacesContext facesContext = FacesContext.getCurrentInstance ();

  org.apache.myfaces.trinidad.render.ExtendedRenderKitService = service

  org.apache.myfaces.trinidad.util.Service.getRenderKitService (facesContext, org.apache.myfaces.trinidad.render.ExtendedRenderKitService.class);

  service.addScript (facesContext, "window.close (); window.opener.location.href = window.opener.location.href; ») ;

  } catch (Exception e) {}

  System.out.println ("ERROR:" + e.getMessage ());

  }

  Returns a null value.

  }

  check if the user is authenticated

  {} public boolean isAuthenticated()

  Boolean isAuthenticated = false;

  try {}

  ExternalContext ectx is FacesContext.getCurrentInstance () .getExternalContext ();.

  isAuthenticated = ectx.getUserPrincipal ()! = null;

  } catch (Exception e) {}

  System.out.println ("ERROR: aisMainBean.isAuthenticated ()" + e.getMessage ());

  e.printStackTrace ();

  }

  isAuthenticated return;

  }

  I haven't checked all the "solutions" you provided. I would say the answer depends.

  If you use OAM, you must connect using the given link OAM. If you log out of just invalidate the session, it will save you all but it can prevent some living resources. This can cost you a lot of memory until the sessions are removed (I hope) by another code, which is not dependent on your application.

  Even for other solutions: If you connect by using a special technique, you should sign out by using the same. This should help to manage resources better.

  Always look at the code in the global context.

  Timo

• Crop the view Desktop pools in monthly basis can be considered a best practice?

  Hi all, I have rearding investigation show desktop pools recompose, the following statement is true or false and if it is true tell me what is the reason for this action.

  
  

  
  

  Each month, pools should be recomposed as a practice without change.

  I guess it depends on the environment.  I usually do reconstructs monthly due to updates.  I have a small pool I ever Redial (unless I upgrade the Agent to view or something like that).

• Required formula and best practices for the storage of data base of calculation

  Hi gurus of the Oracle

  Need your help to calculate the requirement of storage for the production database.

  Thank you

  Hitgon

  I have a query DBA_DATA_FILES show total space allocated.

  SELECT SUM (bytes) AS allocated_bytes FROM dba_data_files;

  And for 'used' space, I run the present:

  SELECT SUM (bytes) AS used_bytes FROM dba_segments;

  We don't need to digress into the discussion of what is truly used as everyone knows that there is unused space in DBA_SEGMENTS. But it works for management!

  I have a report automated that send me monthly. The same report even it breaks down by tablespace... allocated and used as I noted above. Then, I put it in Excel to generate the graph.

  See you soon,.
  Brian

• Best practices for storing the Logs of the system for all newly improved ESXi hosts?

  Hi people,

  What are the options and best practices for the Logs of the system for all newly improved 5.1u1 ESXi hosts?

  Do I need to have the Syslog server or it can be safely ignored?

  Thank you

  Evening,

  Syslog is preferred, but VMware has provided a collector of syslog on the vcenter installation disc can be installed on any windows host or your vcenter. I can't count the number of times where I had guests CMTF or newspapers lost... Fortunately for the syslog which collects up to the accident.  It is not necessary, but it's really a good idea without any real cost since you can use your vcenter host.

  Here is an article on how to install it:

  Set up Syslog ESXi collector | VMware vSphere Blog - VMware Blogs

  Thank you

• Best practices in the selection of the type of authentication

  Hello
  I use Jdeveloper 11.1.2.1. I had reviewed the security and best practices (sorry Chris!) on the selection of authentication types.
  
  Frankly, I prefer basic HTTP authentication because it creates a popup of connection for you (simple - less coding), but I met some documents which make me wonder if this is to be avoided.
  
  
  1. This tutorial uses an approach based on the forms: http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_29/jdtut_11r2_29.html
  
  2. this video of Frank Nymphius (in 42 minutes) uses Basic authentication: http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/AdfSecurity/AdfSecurity.html
  
  3. fusion Developer Guide for Oracle Application Development Framework 11 g Release 2 (11.1.2.1.0) says:
  
  The most commonly used types of authentication are authentication HTTP Basic and form authentication
  It also indicates that the forms-based login page is a JSP or HTML file, [and] you will not be able to change with ADF Faces components.
  
  4. the States of Oracle Fusion Developer Guide (Frank Nymphius) which has a side effect of basic authentication is that a user will be authenticated for all other applications that are running on the same server - you must not use it if your application requires disconnecting...
  
  5. the manual of Jdeveloper Oracle 11 g tells that basic authentication must NOT be used at all (page 776) because it is used primarily for older browsers and is NOT secure according to current standards.
  
  I was able to use Basic authentication, and Digest Http authentication very well, did not attempt to based on the forms for the moment.
  
  For fun, I tried to choose the type of authentication of Client HTTPS and received this very worthy error message (and readable - wonder for java, huh?):
  
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.2 401 unauthorized
  The request requires user authentication. It MUST contain a header field WWW-Authenticate (section 14.46) containing a fault that is applicable to the requested resource. The client MAY repeat the request with a suitable authorization (section 14.8) header field. If the application already includes identification of the authorization information, then the 401 response indicates that authorization was refused for those credentials. If the 401 response contains the same challenge as the previous answer, and that user agent has already attempted at least once authentication, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include diagnostic information relevant. HTTP access authentication is explained in section 11
  
  I'm sure there is one that depends on the answer to that, but I would use the most reasonable and safe type - without too much cost if possible.

  Hello

  Basic authentication makes base64 encoding and is OK to use if the site is accessed from HTTPS. The browser actually sends authentication of users with every request, which makes this approach - if used outside of https - less than optimal. The base forms authentication is easy to implement and more record only basic authentication, it sends a name of user and password to each request. The recommendation is always use HTTPS for secure sites. Most of our samples describing the connection use https as it is a configuration that is not extended within what samples are supposed to demonstrate. For safety, "without much overhead if possible" means to weaken security. In your case, if you have tried the digest authentication so I guess that's the one with the least amount of overload

  Frank

• Sideloading content to the Kindle Fire - best practices

  We are looking at our options for a workflow QA for our magazines check that they work well on fire. We are clear on how to get our sideloaded app customized on fire, but we need some comments and suggestions on how to better implement a workflow for our production teams artistic/readily and easily get their Folios magazines on fire development to test their custom applications. They will have to scroll through these tests repeatedly in the design environment before releasing us a problem to store for sale and setting up a complete for these creations Eclipse-based development environment is not suitable. Does anyone have suggestions and best practices for us cause sideloading content for review in our custom Kindle applications? The current recommendations are to download our content development on the CD and then simply download it the Kindle, but since there is no commissioning of the Kindle app, we know not how we can keep our test Folios private for internal testing only once they are on the CD. I'm wrong to worry about this? Our Folios test would not be visible to the users of other Android devices, once we upload, before even our personalized Kindle app is approved? What we really need, it's an app or an inline function like iTunes for sideloading develop content of test directly to Kindle fire as we currently do with iPads.

  Clarification, suggestions or best practices, others have found useful would be most gratefully appreciated.

  Adobe Content Viewer app is here for the right reason to test your slips on your devices before it becomes, if you do not have to create an application each time you test your folios.

  If the content viewer application is not an option, as recommended above, Alec then go ahead and create a test ID (e-mail which fact sheets are published) application and create a custom Viewer test application, then distribute the application for those who want to test the application on the Kindle.

  • Go ahead and create a viewer application of client with the above as the title ID application ID in the generator of spectator.
  • Download the .apk file
  • Share the .apk file with anyone who wants to test the app

  If your application was never live on the store, you don't have to create a test application ID. Instead, use the same application ID you want to use for the app goes live to publish your folios. Because your application has never been direct from the store, only those that you shared, the custom application (.apk downloaded in step 2 above) will be able to view the content/folio that you put to the test on an application real custom Viewer.

• best practices or framework for the design of OSB(11g) process

  Hi all
  
  We worked in oracle 10g, now in the new project we will use Soa suite 11 g. For 10g, we have designed our services very similar to the framework of AIA. But since the introduction of OSB 11 g we are not able to exactly fit the frame of the here AIA because the BSO has a different structure of the BSE.
  
  Can anyone suggest some design framework for the design of processes in OSB or 11g SOA Suite or best practices?

  http://download.Oracle.com/docs/CD/E12839_01/integration.1111/e10223/04_osb.htm

  http://www.Oracle.com/technology/products/integration/service-bus/index.html

  Kind regards
  Anuj

• One of the ESXi host 3 no HW Compatible for ESXi 6 upgrade?

  Hello

  There are 3 DELL servers (2 of them are running R530 and 1 is executed R900).

  When attempting to upgrade these 5.5 ESXi hosts to ESXi 6, we find that the R900 is no longer supported.

  Wonder what is the best way for us to do - keep using ESXi 5.5 or level 2 of them to ESXi 6 and leave remaining on an ESXi 5.5?   We have no intention to replace the R900 in the near future.

  Thank you

  If all three hosts are part of the ESXi Cluster, then you must do all the guests at the same version level. Therefore, keep all the on ESXi 5.5

  But if you use these host as a standalone ESXi host then you can upgrade the host to ESXi 6 two and let R900 on ESXi 5.5

  Thank you

  Hentzien

  Virtual Admin

• To access the ESXi 6 via the webclient service

  Greetings,

  I'm sorry if I'm just cutting on it, but maybe it's an easy question to answer.

  I'm in a very locked down environment and I can not access vSphere windows client (client installation is not allowed on my windows desktop).

  I have 5 hosts ESXi 6.0 and I need to deploy vSphere 6 on top of these hosts.  My plan was to go directly to one of the hosts and install vCenter on a virtual machine on that host.

  From this point, I would be able to connect to vCenter and build the rest of the environment.

  As I don't have access to the Windows client, I have to use the web client to interact with the environment (I would need to connect the host to the first and build vCenter), but given that I have not vCenter or the webclient service installed yet, I see not a way to actually enter the ESXi host using the webclient service.  I know with 5.5, was the order for the installation:

  1.) SSO

  2 web client).

  3. inventory service)

  4.) vCenter Server

  But what I would do here with version 6?  Can I run the installer of vCenter and install the web client on my desktop and then use it to access the host to create the environment?

  It seems that the windows client really is a must if you want to connect to a host (if you don't have the webclient service installed).  Is this fair?

  There is no webclient for administrering a stand-alone ESXi host, only the Windows client.

  However the vCenter device built in deployment tool to deploy a vcenter device you don't need customer C sharp, but you must be able to install the plugin for integration of customer.

  If you need a Windows vCenter server you need to deploy the fashion old way

• Create new vCenter and move the ESXi hosts

  Hello

  I created a new vCenter vCenter apparatus using ISO 6.

  The deployment went well and I have all the installation program. I would now like to move hosts our old vCenter to new ESXi.

  I was reading this article to start the moving process.

  When I try to disconnect the host I get the message below

  

  In the article in the link above it is written that it will not affect the State of the virtual machine running on the host.

  If I click on 'Yes' here, it will automatically put the host in maintenance mode?

  I prefer not to do it if I can avoid it because I don't want to have to evacuate all virtual machines running on the esxi host.

  Wouldn't it be better if I disabled it HA first? Then try to move hosts? Or I'm sure to sign-out and the subsequent removal?

  Thank you

  See you soon

  Hello

  You must put your server in maintenance as a first step mode, then unplug and remove the server. It will work.

  If it doesn't work, disable temporary HA and remove your host of the VC.

• With regard to the ESXi password

  How to reset the password to the ESXi if I forgot.

  Hello

  You cannot reset the password, need to go to the new installation, please consult the KB

  Change root password forgotten on an ESX/ESXi host (1317898)

• Help: The ESXi host has no persistent storage

  We have an ESXI 5.0 installed on our Dell server and we have some virtual machines running. suddenly, we had a mistake on Vsphere client.

  "EXSI host has no persistent storage.

  To run the virtual machine, create at least a data store for the maintenance of the machines virtual and other system files. »

  to resolve this problem, so we tried.

  On Vsphere client (connected to the ESXI)-> configuration-> storage-> rescan all... once the re-scanner has been done.

  We are able to see the file was mounted on the data store and it is lost in a minute. so it isn't permanently mounted to the data store to access the virtual machine.

  Once we do the re-scan once again, we saw that the file has been fitted to the data store and lost again.

  assemble and disassemble is to continue to switch.

  We need a solution to fix the problem, or in the worst case we need a way to recover the Esxi machine (VMS) data.

  Kindly share the reflections.

  It should be a disk error, it is local storage that tempt you and the virtual machine files are stored in the local disk

  don't forget to check the logs on the bit/ucs, regardless of the remote management tool, you use...

  Please check the log files and vobd.log vmkernel

• How to upgrade the esxi 5.0 and 5.5 only give me the step in process setp.

  How to upgrade the esxi 5.0 and 5.5 only give me the step by step process.

  There are several methods supported for direct upgrade to 5.5 ESXi are:

  • vSphere Update Manager.
  • Interactive update of the CD, DVD or USB drive.
  • Scripted upgrade
  • esxcli
  • Automatic deployment

  You can find each method in this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2058352

  Also a good interactive video updated via CD/DVD/USB. Upgrade to VMware ESXi 5.5 using Setup Interactive - YouTube