To access the ESXi 6 via the webclient service

Similar Questions

• "Could access the Windows service install.

  "Could access the Windows service install" is the message that I get when I try to install itunes.  I had difficulties to install other programs as well.  If windows install is a program, how can I fix it?

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot access the windows service install

  Initial Setup error title: windows
  I'm unable to download the latest version of java as well as the updates of windows and the reason given was that "cannot access the windows service install" Pls advise

  Hello

  What happens when you try to perform windows updates?

  Check the status of the Windows Installer service and make sure that it is started

  Method 1:
  Start the Windows Installer service
  a. Click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Unregister and register the Windows Setup program again
  Method 2:

  Unsubscribe and re - register the Windows Installer to do this follow the steps below.

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.
  c. try your application based on Windows Installer again.

  Method 3:
  You can follow the steps in knowledge base article and check:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• the WebClient service is still in a State of 'stop'

  Hello

  I have a problem with Windows XP SP3 computer cannot access the sharepoint site by displaying in Solution Explorer.

  It seems that the cause of this problem is that the internal "Web client" service is still in a "stopping" State, instead of "on the road", even after a reboot.

  I tried to look on the web for a solution, but without success, can anyone please suggest why this service is still in a shutdown state and what can be done to solve this problem?

  Thank you

  Amir

  Hey Amir,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• I have a laptop wireless Officejet j4680 printer, but cannot access the "printer services.

  The wireless printer works fine, except that I am not allowed access to the "printer services.

  Hello

  What is the operating system installed?

  Download and install the complete operating system software of features appropriate for your printer. During execution of the tasks of maintenance on your printer, it is better to go in the HP, not the properties of the printer dialog window software.

  The following image use Dutch as a language, but it works for me. The HP Solution Center is where I align and clean the print heads. I print only to test the pages in the print dialog window.

  

• How to access the ESX service console

  Hi all.

  I'm a TV engineer trying to solve a problem of network with our equipment. I'm not a network engineer.

  I'm trying to follow the VMWareKB: "Troubleshooting connection problems network using the Protocol ARP (Address Resolution)" I'm just trying to check the ARP table exists on our ESX Server and has some entries.

  KB said running 'arp - a' for a list of the ARP table.

  To do this, I need to open a service console. I have now read articles 3 or 4 on the use of the Service Console but I am still unable to open it to run the command. I do not understand what I am doing wrong, I am incredibly stupid or miss me something completely.

  An article said, press 'Alt F1"exactly where I am doing this? A virtual machine is connected to the ESX? An article said "to VIM summary screen' I tried logging on the virtual machine and point a web browser on the server, I get a screen of welcome of ESX with link"Connecting to Web Access", when I click on it I get"Internet Explorer Can t Open The Web page.

  I had a look at VIM, I can see the details of the Vswitch network on the configuration page, including the IP address of the console service. Can't see how to open a service console. VIM of pointing at the address for service console is unable to do anything.

  I just need to know how to open the Service console and check the tables of ARP based on the KB.

  Please dumb down of your responses to me!

  The fundamental problem is about some units of electric distribution that we use to power the equipment in the racks. They have a network connection which we track using Virtual Machines to the report of a third person of monitoring and control software. The virtual machines are running alarm software driver used to report to the third party. The virtual machine is on a blade server.

  We have a problem where a unit of the IML has been replaced but configured with incorrect default gateway address. In the hours to do so, the monitoring and control software lost connection to ILM and one by one, all units of the IML began to send the ARP requests - "who has 10.172.248.254'.

  Finally, the MDU constantly send ARP requests and the MDU have lost connectivity to the virtual computer. If we open the VM machine, follow up and a MUD, the ping command ping fails, if we put a laptop in place an ILM and ping the machine VM, the ping works fine.

  If power us off/on the ILM voltage they are good, but we are a 24/7 operation and power cycling the MDU is considered risky.

  We have had this problem before and the only solution was to rebuild the virtual machine and assign all MDU to a new network address.

  All switches ILM is connected (foundry Falstron GS) have been verified by the support of our network guys and we are told are all good. The blade server hosts about 20 VM and they work just fine from other systems SNMP traffic monitoring.

  If anyone has any ideas I'm all ears.

  Hello

  As stated, the console is the administration interface that you can use directly on the hardware. It is not a VM (as such) that connect you with the standard management GUI. You can SSH in the network or you can be "physically connected" as you say (I would use HP SIM or the ILO to connect directly to the blade). Once you have that screen upward, press 'Alt + F1' and you connect. Then you should be able to follow the KB to check the ARP table.

  See you soon,.

• How to access the web service from Oracle?

  Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
  
  I'm making a call to a web service through a procedure/function...
  
  I tried to use
  

  CREATE OR REPLACE PROCEDURE Call_Rest_Webservice
  
   AS
  
    t_Http_Req Utl_Http.Req;
  
    t_Http_Resp Utl_Http.Resp;
  
    t_Request_Body VARCHAR2(30000);
  
    t_Respond VARCHAR2(30000);
  
    t_Start_Pos INTEGER := 1;
  
    t_Output VARCHAR2(2000);
  
  BEGIN
  
    /*Construct the information you want to send to the webservice.
    
    Normally this would be in a xml structure. But for a REST-
    
    webservice this is not mandatory. The webservice i needed to
    
    call excepts plain test.*/
  
    t_Request_Body := 'the data you want to send to the webservice';
  
    /*Telling Oracle where the webservice can be found, what kind of request is made
    
    and the version of the HTTP*/
  
    t_Http_Req := Utl_Http.Begin_Request('**webservice address**',
                                         'GET',
                                         'HTTP/1.1');
  
    /*In my case the webservice used authentication with a username an password
    
    that was provided to me. You can skip this line if it's a public webservice.*/
  
    --Utl_Http.Set_Authentication(t_Http_Req, 'username', 'password');
  
    /*Describe in the request-header what kind of data is send*/
  
    Utl_Http.Set_Header(t_Http_Req, 'Content-Type', 'text/xml charset=UTF-8');
  
    /*Describe in the request-header the lengt of the data*/
  
    Utl_Http.Set_Header(t_Http_Req, 'Content-Length', Length(t_Request_Body));
  
    /*Put the data in de body of the request*/
  
    Utl_Http.Write_Text(t_Http_Req, t_Request_Body);
  
    /*make the actual request to the webservice en catch the responce in a
    
    variable*/
  
    t_Http_Resp := Utl_Http.Get_Response(t_Http_Req);
  
    /*Read the body of the response, so you can find out if the information was
    
      received ok by the webservice.
    
      Go to the documentation of the webservice for what kind of responce you
    
      should expect. In my case it was:
    
      <responce>
    
        <status>ok</status>
    
      </responce>
    
    */
  
    Utl_Http.Read_Text(t_Http_Resp, t_Respond);
  
    /*Some closing?1 Releasing some memory, i think....*/
  
    Utl_Http.End_Response(t_Http_Resp);
  
  END;

  But it's me ORA-29272: HTTP request failed
  ORA-06512: at "SYS." UTL_HTTP", line 1029
  ORA-12545: Connect failed because target host or object does not exist
  
  But I can connect to the web server by going on * webservice address * through my browser.
  
  Is there an ACL must be open in order to have this capacity? I asked my s/n, but she asked me that I will need to give its name to username/password / ip in order to open an ACL...
  However there is no name to username/password required during a tour of the web service...
  
  Any help would be much appreciated...
  
  Thank you
  
  Published by: 986006 on March 4, 2013 08:38

  Y.L wrote:

  This is because the database could not connect to the specified server. Bad host name or IP address specified. Inability to resolve the hostname to an IP address. Firewall blocking. Etc.

  The host name, I put here can be visit through my browser. I think that it is not question of the host server... So, it could be a firewall on my side of the database which must be opened in order to visit the host?

  The "web browser" (your PL/SQL using UTL_HTTP code) code is running on the Oracle database server. He needs the same type of network access that has your browser on your PC. (firewalls open, authentication of the proxy if necessary, etc.).

  On 11g. Not on 10g.

  I saw the code example you post from the link you provided... those who only works on 11 g?
  If we can work on 10g, which package or what are the steps I need to follow in order to have that works on me?

  The code I posted works on both versions. My comment was regards the ACLs. No ACLs exist on 10g. If you only need to execute privs on the affected packages (e.g., UTL_HTTP, etc.).

  ACL were introduced with 11g - 11g, you also need the ADMINISTRATOR to create an ACL for you which will allow access to the UTL_HTTP network so now.

• access the web service WSDL (https) - ORA-29273: HTTP request failed

  I use 11g (11.2.0.1.0)
  
  I've already implemented a function that access a WSDL service, sending a XML request with answer. It is an HTTPS service and I had successfully setup the configuration of the ACL.
  Wallets and certificates were also imported according to the needs.
  However, it has stopped working and I get the following errors, which I can't find out why?
  
  ORA-29273: HTTP request failed
  ORA-06512: at "SYS." UTL_HTTP", line 1130
  ORA-12545: Connect failed because target host or object does not exist
  
  The same service works perfectly for an another database 11g...
  
  Any ideas?

  AndreasCon wrote:

  ORA-12545: Connect failed because target host or object does not exist

  This error means generally that the socket connect command failed, because the host name has not be resolved to an IP or IP connection failed.

  What is the URL that you use? It contains a host name? If so, how PL/SQL solves that one IP (use utl_inaddr.get_host_address () to determine that)?

  What is a valid IP address for the host? Connectivity to this IP address works of your Oracle (test using telnet on port https to IP) Server?

  Looks like on this server host name resolution is not working / configured correctly (saw that the code works on other servers).

• Try to install Topaz Denoise and Topaz Clean, getting the error "cannot access the windows service install. "This can happen if windows install is not properly installed.

  This problem arises when clean installing topaz denoise and "Topaz". I tried the fixes in this article http://support.microsoft.com/kb/2642495 and none of them seem to work. This problem arises when clean installing topaz denoise and "Topaz". I tried to install other programs, and the error does not appear anything else. I also restarted my computer, any advice on how to solve this problem would be appreciated.

  Original title: the windows service install are not accessible. This can happen if windows install is not properly installed. Ask your assistance technical assistance

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot, try to install the programs and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Method 2:

  I suggest to try the methods mentioned in the following article and check the status of the issue.

  How to solve the problems when you install or uninstall programs on a Windows computer.

  http://support.Microsoft.com/kb/2438651

• [Windows 8.1] Limited Internet access + the dependency service or group was able to start the PROBLEM.

  So I have this problem for a long time . I can connect to the internet, but it says limited. It works perfectly fine but the computer says that I am not connected.  I don't know what are the causes that. Troubleshootin g can't find any problems. Also when I go to network and sharing Center , he said:

  Unknown

  The dependency service or group was able to start.

  Thank you: D-Patrick

  Please run a check of system files (SFC) & DISM if you're on win 7 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

• Toshiba 39L4363D cannot access the Cloud Services

  I recently bought a 39L4363DG and updated to the latest version of the firmware 7.1.56.16.01.1.

  Every time I try to access something on the cloud House TV tells me that it is in "demo mode" and it lacks an internet connection. However, the connection is there I can surf the Internet with the integrated webbrowser. I am also able to "remote control" the TV from my smartphone...

  Ask Toshiba support has led to the recommendation to reset and reconfigure the TV.

  Who did about 10 times now, with no changes to the situation.

  Interestingly, I found that select language English configuration finally led to a window showing the configuration of cloud services and asking me to accept the waiver. Prior to this, it seems that the TV has download something (a small windows open on the top left, counting upward at 100%)

  Accepting and pressing "complete installation" always ends in the fact that I get an error message whenever I try to use something on the homescreen cloud... I am not able to choose an option in the left menu disclaimer.

  Choose the German language ft installation ends directly on the homescreen cloud without asking anything about a warning or a cloud House installation...

  I read about this problem for a 32L 4333 below a few threads. The solution was to reset the TV...

  Indicated above, this has not worked for me.

  => Any ideas?

  *@Tuxedomoon*
  Great! Thanks for sharing this news with us!

• Install the WebClient 6.0

  Hi guys,.

  We waited the coming 6.0 RC version.  Now its here horrah! (It's what we thought...).  We read that you can connect a WebClient 6.0 to a 5.50 vCenter - so we thought were ready to start...  But after 2 days of frustration - we must ask... Help, please!

  We do our development of plugin on a virtual machine.  Our vCenter or servers are location on other machines.

  I read the vSphere WebClient SDK Setup-> to install VWC in your development machine

  The second option is to use the Setup program to install the WebClient service - this is how we did for previous versions:

  So I mounted the ISO and sought a ' VMware - WebClient.exe "-he found nothing and the directory on the .iso image file structure is different than before.  I looked under

  vCenter Server/packages and found VMware - WebClient.msi, but from this no longer works.

  I read that you can start the actual installation with autorun.exe - and choose only the installation of WebClient.

  Adds a nd processor 2. My VM and my value 8176MB memory - and I started the installation.  I could choose to install a vCenter only,

  but there is no option to install the WebClient service only.  The desired installation install a vCenter Server on my virtual machine.

  Next test was to unzip the serenity-customer and set that as my SPAN Virgo - I edited the client.properties with search url and the thumbprint.

  Then I started the server - and found many errors in the Virgo.log

  One of the first were:

  ... com.vmware.vise.vim.cm.impl.AfdCMSource error when it comes to afd customer java.lang.ExceptionInInitializerError: null

  .......

  Cannot resolve the reference to the "ssoServiceImpl" of beans while defining the argument to the constructor. Nestled... The component of the VMware Manager URL can not be empty.

  ....

  I thought that any problems can be caused due to my current installed WebClient 5.5 U2 - so I uninstalled that. and restarted the blank server.

  This did not help either.

  Thus, at least for me, the two options described in the installation of the SDK software program do not work.  At least they do not work as described. I enclose the Virgin paper

  more information.  2 of my colleagues have had similar experiences.

  Help, please! We really left to start.

  You must install vSphere 6.0 in order to use Web Client 6.0.  You can add your vCenter 5.5 to the SSO server that comes with 6.0.

• Error accessing the page of the instructor

  Hi all
  
  I encounter the following error when I try to access the self-service page instructor.
  Will be grateful for any guidance.
  
  
  Error
  
  The application are not identified, so you can not access the instructor homepage. Contact your system administrator.
  
  
  STEPS FOLLOWED:
  I created the KFF learning resource and created a trainer by the CE to a person.
  I booked the teacher as a resource for a regular class.
  I assigned the responsibility for training instructor Self Service to the person.
  I put options of the profile of this responsibility (safety, Type of user and Business Group)
  I also gave to the person a formative role learning using the RBAC User Management link.
  
  
  Concerning
  -Manish
  
  Published by: 904775 on January 10, 2012 23:58

  Error

  The application are not identified, so you can not access the instructor homepage. Contact your system administrator

  Please see these documents.

  Access learning instructor Home > Application does not recognize you [ID 371505.1]
  Trainer cannot function to access learner home learning instructor [ID 361223.1]
  How do I create users with restricted access to OLM [ID 423241.1]

  Thank you
  Hussein

• deploy the web service to xp embedded

  Hi all

  I struggle to run a web service on an xp embedded system. The web service works very well in my LV 2011 development environment and I have created an installer for my main application it is the lvws file is included as described in web services FAQ:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7747#toc12

  After the installation on the target computer, I can't access the web service. Also if you call localhost:3580, then I get an access error.

  But in the System Control Panel administrative tools, I can see that the server system OR like many Web server OR Web applications are started.

  For further investigation, I added the 'Distributed System Manager' to my Installer. With this tool, I see that all my web services deployed on my development system, but on the XP embedded system with TEN target is listed.

  I installed my application for a professional reference XP system to exclude that the problem is caused by embedded XP. But the behavior is exactly the same. So far, I tested only local so that settings security like firewalls and ports system should pose no problems. But to be sure I have disabled the firewall without success... I can't access the Web service. I have often found the suggestions in the forum to check if the web service is enabled. But I am not already and then access to http://localhost:3580.

  Any ideas?

  Thank you!

  This help document is somewhat outdated.

  You see 2 different problems: 1) you can not display the Configuration utility and do not install Web using localhost:3580 2) your web service monitoring.

  For the first number-->

  You probably did not understand the "Interface Web NI 2011 infrastructure" in your Setup program.  The doc to help you mentioned does not tell you to do, because it is not necessary for your web service works. However, if you want to change one of the settings of your web server after the installation, you will need this extra setup program.

  For the second question-->

  You probably didn't get your Spec to build Web services as a source file in your Setup program.  The help doc says to put your LVWS file as your installation source, but this is not correct. You must include the technical article to build real web service as a source file (not the web service create out of spec files, like LVWS).

  Let me know if any of these will help you.

  -Jared

• The windows service install are not accessible. This can happen if windows install is not properly installed. Please contact the support staff

  Whenever I try to install a new version of Java, but also apply for income tax, my computer basically freezes and I have to stop it manually after that I finally get the message "cannot access the windows service install. This can happen if windows install is not properly installed.  Please contact the support staff.  I tried MSI 4.5 but everytime I try to download, I get the prompt "not applicable to your system.  I'm running on Windows Vista basic and I tried to cancellation of the registration of windows install and re save, but nothing seems to work.  Extremely frustrated

  Hi confused79,

  Thank you for your message.

  Here is more information on the use of file system (CFS) Auditor:

  http://support.Microsoft.com/kb/929833

  You can also create another profile to see if the problem is the result of a corruption of your current profile.

  Here's how:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.