The file HPZius12.sys on HP cd is needed

Similar Questions

• Portege 2000, the file fcpcmcia.sys is not found

  I want to install windows XP in a machine Portege p2000 but after the first reboot, the display shows only:

  The file fcpcmcia.sys is not found

  Press a key to continue.

  I have Toshiba phone and they can't help me. Any suggestions?

  BRIEGA

  Hello

  Tell me how you do the install. What is a 'clean' WinXP media that you start the computer from or is it a Toshiba Recoverymedia? Please describe the procedure a little more detail.

  BR

  Tom

• Windows XP Professional Setup copy iaStor.sys then the OS says that it cannot copy the file iaStor.sys.

  After the RAID 0 disk partitioning, installing Windows says it will copy the files in the file system. The first file is iaStor.sys. My SATA CD drive runs for a few seconds, then there is a long pause, then the OS says that it cannot copy the file iaStor.sys. He goes on to say that I should check that there is a CD in the drive. Any ideas?

  Here's the solution to this problem:

  1. in the disk driver (a:\) root directory create a directory called holiday of $ $OEM existing files as they are, we will not delete or replace anything.

  2. in the directory $ $OEM you have created, create another directory called TEXTMODE

  3. copy all the driver files located in the root directory to the A:\$OEM$\TEXTMODE subdirectory, try to reinstall, it should now work.

• Installation of Windows XP tells me that I need the file "igxpmp32.sys.

  I install windows xp on a laptop given to new, I bought because I just couldn't connect on it.

  During the installation it stops and tells me I need the file 'igxpmp32.sys' I seek but can't find. Help, please

  original title: how to find "igxpmp32.sys.

  Hello, Tona,

  Igxpmp32.sys file is located in the folder C:\Windows\System32\drivers.  This is the accelerated Intel graphics drivers.  Try Intel.com.

  http://www.Intel.com/content/www/us/en/search.html?keyword=+igxpmp32.sys

  You can also find the rom installation.

• Windows XP Setup error: the file ohci134.sys is corrupted?

  I was on my computer when my power cut off, and now it used to boot past the Windows XP loading screen, so I inserted the windows disk to run a chkdsk command or a repair, but I get the error: the file ohci134.sys is corrupted. Press a key to reboot the computer. »
  It won't let me access to the CD-ROM to install windows because of this error, and I can not boot past the windows loading screen! He's going to enter the safe mode options but whatever one I choose, it flashes a quick blue screen which says UNMOUNTABLE BOOT VOLUME. How can I fix?

  This is a nice article if it starts your desire to install the as option to start Recovery Console, your system and that you have a genuine XP installation CD bootable that corresponds to your installation.

  Here, the system does not start, there is no installation of the Console recovery and most people either have no real XP bootable installation CD or if they don't have one, it's older than their Service Pack installed.

  Unfortunately, we don't know anything about this system which is afflicted, except that it's a computer that no longer starts.  A little more detail would help, but that's the way things happen here in MS Answers forums.

  I just make a bootable CD of XP (no XP media required) Recovery Console and use it.

  Here's how:

  So, let's start with this:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• When installing LifeCamera 2.07, she asks the file "nx6000.sys." where can I find it?

  during the installation of lifecamera 2.07 (VX7000) request the file "nx6000.sys." In the disk estimé there with the camera is not possible to find the requested file. What should I do? Sorry for my bad English!

  Hello

  · What is the exact error message that you receive with the error code as appropriate?

  · What service pack installed on the computer?

  You can try the steps listed in the link below: troubleshooting installation of Intellipoint and IntelliType LifeCam software: http://support.microsoft.com/kb/953691

  Drivers, software and documentation of your product

  LifeCam VX-7000: http://www.microsoft.com/hardware/en-us/d/lifecam-vx-7000

• Not able to repair Windows XP computer error cannot find the file [e1e5132.sys].

  Original title: need help to use the repair feature when you use the disk of resettlement for XP Media Center 2005.

  I cannot using the repair on Windows XP Media Center 2005 feature.  I started the repair process and enter the installation phase, but the installation stops because it cannot find the file [e1e5132.sys] which is a Windows\System32 folder.  I managed to download a Pack which included the file (using another computer), but I can't properly cancellation of the installation in order to install the file in the appropriate location.  Whenever I try to restart the computer, it goes immediately to this part of the installation of the repair process.  Even when I try to restart without reinstall into the CD drive; When the reinstallation disk is removed and I try to restart, it requires me to insert the disc to continue to the reinstall.  Help - How can I back out of the reinstall, so that I can add the missing file first?

  Hi Stephdan,

  1. have you done any hardware changes or software on your computer before this problem?

  2. Why are you trying to fix the computer?

  It would be possible that the Windows XP installation disc is damaged.

  (a) you can try to do a Windows XP disk which should correspond to the same edition, as it is installed on your machine.

  (b) later, try to repair the installation and check if you are able to boot to the desktop normally.

  Perform a repair Installation

  
  Note: however, you should not have Service Pack 3 installed on the computer before you run repair installation.

  Hope the helps of information.
  Please post back and we do know.

• Error - the file awduu36e.sys is not found. Press a key to continue, not able to start after having done the repair of the system on the XP machine.

  Original title: the awduu36e.sys file is not found.

  After a repair of windows XP SP3, I receive, at startup, the message "the file awduu36e.sys is not found. Press a key to continue"- I can't press a key because the keyboard is not recognized or active at this point in the trunk, although I can access the BIOS earlier in the cycle. I tried to boot from the CD from Microsoft but get the same problem. -Any ideas please?

  "cadastra" wrote in message News: 80941b1a-7 c 69-4f05-a259-560357b7f291...

  Hi Kim,

  First of all thanks for respone and sorry for the delay to return but am in Australia so bit of a lag in time!

  OK the sequence goes as follows:

  1 gigabyte MB BIOS screen - at this stage sensitive keyboard and I can access BIOS OK.

  2. new screen - PCI resources; Checking DMI Pool etc. ;

  3. new screen - "Please choose which startup option:

  -Windows XP Home Edition

  -Installation of Windows XP.

  and countdown etc. - from this point in the sequence of the keyboard does not respond so cannot select the OS and inadmissible F8, then highlighted option default selected that is configured.

  4. new screen - "check you computer hardware configuration...".

  5. new screen - "the file awduu36e.sys is not found. Press a key to continue. "

  As the keyboard is unresponsive after the BIOS screen I have no way of influencing the order above.

  Other relevant points:

  -When you make commissioning/repair day I received the message to halfway through - "awduu36e.sys file is not found" and the option start over or ignore; after another attempt to a couple of times I chose skip so I guess that I got myself into this mess. What is awduu36e.sys anyway?

  -My copy of Windows XP Home Edition SP3 OEM is and has been installed when I got to the machine, so I think that some repair options are not available for me in any case.

  Again thank you very much for the reply and any help you can provide,

  Kind regards

  Fraser

  Looks like you are leaving it too late to use F8 (must be before the OS options appear)- and you have a partial installation of some versions of Windows in progress seeking the file on a CD.
  
   
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• When I try to run system repair ffrom originally Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt"

  Original title: when I try to run the system repair ffrom the original Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt" is anyone know the solution for this problem? Thank you, Kelsey.

  The message arrives as soon as I select "repair system" can not find the file on the Windows Dvd.

  Hello

  1. why you try to run the system on your computer repair?

  2. when exactly you receive this error message?

  If you receive the error message while booting from the Windows Vista DVD it means that the file i2omp.sys is corrupted.

  You may need to make arrangements for a Windows Vista disk that corresponds to the same edition, as it is installed on your computer. Later, try to repair the system on your computer.

  How to replace Microsoft software or hardware, order service packs and replace textbooks?

   
  Reference: What are the system recovery options in Windows Vista?

  Hope the helps of information.

• Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.

  Last month, I had a series of blue screens.  The problem points to the files Volsnap.sys or Classpnp.sys.

  I have a Dell Precision T3500, running 64-bit Windows 7 Prof.  The system is configured with RAID.

  Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that.  It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.

  No idea on how to stop this would be really appreciated!  Thank you

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.

  TrendMicro is most likely part of this question, as it is known to have caused or
  make these problems worse. Uninstall it and run the removal tool to prevent
  remains of troublecausing. The following recommendations to use during the test,
  even better all the time.

  TrendMicro removal tool
  http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ------------------------------------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  ==========================================================

  The Bug_Checks were D1 (19 long happened if he should really
  do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
  Components of Windows, which means something else led in error.

  1. Uninstall TrendMicro as it has a role - is not enough to just disable
  such that it will still load chunks of itself in memory.

  2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
  or other corruption could be at stake. Classpnp.sys is the SCSI class system
  dll checking and disk problems will affect the it. Run SFC/scannow, and then
  Checkdisk (chkdsk /f r).

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =========================================================

  Other troubleshooting methods:

  BCCode: D1 0x000000D1

  Check these KB

  Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
  from sleep or standby extended: "STOP: 0x000000D1".
  http://support.Microsoft.com/kb/978982

  Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
  system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
  http://support.Microsoft.com/kb/2320550

  Those 7 other KB Articles are available
  http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

  --------------------------------------------------

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
  If necessary.

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

• I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. Help

  I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. HELP PLEASE. previous e-mail files are under mail then mail.earthlink* .net and each of the five mail .net is an email address I have. I can't find a way to identify each file by email to the specific email address (IE mail.my E-mail name.net) so I can copy the files and emails from the past to the email addresses now under tbird. previous installed e-mail identities may not be the current configuration of e-mail files in tbird. I think that I must be sure that mail.name.net matches the previous mail.name.net to be able to copy and paste the old to the new. is there a way to find the file name correct the old email and correspond to the new? all my emails very important information are mostly in the old mail electronic id and must be available in the identification of email again (but same) how can I do this?

  http://KB.mozillazine.org/Importing_folders

  Use this module.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

• The files boilerplate.css and respond.min.js need to be in the root directory, or can they be in a subdirectory such as css or js?

  The files boilerplate.css and respond.min.js need to be in the root directory, or can they be in a subdirectory such as css or js?

  The answer is 'Yes', they can be in any directory, as long as you have created the appropriate links so that the files can be found.

• I can't fix error 651 by replacing the file raspppoe.sys as I don't have admin rights to System32/Drivers. What can I do?

  I get error 651 on WIndows7. I tried to replace the raspppoe.sys file as it was recommended, but I am unable to do this since I don't have administrative rights on System32/Drivers.
  Please, advise.

  Hello

  Unfortunately, you will not be able to rename system files or folders without administrator privileges. To rename and solve the problem, try to connect as an administrator and try to rename the file system.

  Also, try the following steps to take over the file and then try to rename the file system:

  1. Open Windows Explorer and locate the file or folder you want to take charge.
  2. Right-click on the file or folder, click Properties, and then click the Security tab.
  3. Click Advanced, and then click the owner tab.
  4. Click Edit, and then do one of the following:
     • To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.
     • To change the owner to a user or group that appears in the area of change of ownership to , click the new owner.
  5. (Optional) To change the owner of all subcontainers and objects in the tree view, select the check box Replace owner of subcontainers and objects .

  For more information, visit this link: http://technet.microsoft.com/en-us/library/cc753659.aspx

  I hope that helps!

• Need help, move, or delete the file hiberfil.sys and pagefile.sys to reduce the free space in C: drive

  Original title: need assistance to move or delete hiberfil.sys and pagefile.sys

  Is there anyway I can move or remove 2.43 GB hiberfil.sys and pagefile.sys 4.39 GB in a defferent drive because I'm running out of space on my C: drive?  They take so much space.

  See this tutorial to move the swap file, however, I recommend have at least a 900MB

  pagefile on the C: drive to allow the creation of a dump in case of problems with the system file.

  http://www.Vistax64.com/tutorials/132201-virtual-memory-paging-file-change.html

  To delete the hiberfil.sys, you must disable hibernation. It cannot be moved.

  http://www.SevenForums.com/tutorials/819-Hibernate-enable-disable.html

• Error with a blue screen in windows 8 64-bit because of the file "cnnctfy3.sys".

  I m sending u link of this error minidump files since there were 5 error files I downloaded on OneDrive

  Link: https://onedrive.live.com/redir?resid=620CE0EA1DD716E9%21356

  CrashFileUpdate folder_name

  Please help me... my laptop running very low, because of this. and the start-up stop n is tedious because of this...

  Thanks and greetings

  Ravi Mehta

  HI Ravi,

  This problem can occur because the cnnctfy3.sys file on the computer.

  All files dump reports show:

  9F error checking, {4, 12 c, fffffa8004a5ab00, fffff880009c2810}

  WARNING: Unable to verify timestamp for cnnctfy3.sys

  ERROR: Module load completed but symbols can be loaded for cnnctfy3.sys

  Failed to retrieve the thread context, Win32 error 0n30

  WARNING: Unable to verify timestamp for win32k.sys

  ERROR: Module load completed but symbols can be loaded for win32k.sys

  Probably caused by: usbccgp.sys

  cnnctfy3.sys is the driver of Connectify light package Filter Kit. If you have installed the package, I suggest to uninstall and check if this solves the problem.

  Please keep us informed.