"The file is not found."
I imported the images into Lightroom, but when I tried to change to 'Develop', a notice appeared "this file is not found." What can I do to access these images for editing?
This means that the file (or the folder that contains it) has been moved, renamed or deleted outside of Lightroom. You need to use your operating system to find the exact location of the file (by file name), and once you know, you can reconnect the photo inside Lightroom by following these instructions: Adobe Lightroom - find folders and files moved or missing
Tags: Photoshop Lightroom
Similar Questions
-
Satellite Pro M10 Hibernate - error message "the file is not found.
I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.
I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice
When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
Of course, this file is missing in your installation.
You can activate and disable hibernation in the system control-> power options.
Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
The size of the hibernation file is different from your main memory size. -
I can't dfragment c drive. I get the message run Ckdsk/f. The file is not found.
the command is CHKDSK /F.
However, it is best to run this instead: CHKDSK /R
It is unclear if you do not run the check disk drive correctly or if the check disk command / file is affected by the volatile file system.
my suggestion is to acquire a xp boot cd and boot the recovery console.
then when you get to the disk prompt run the command >: CHKDSK /R
then type exit, remove the cd and boot into windows.
-
I recently bought Age of Empires 3 and tried to install it. I get to drive three - until almost the end - when I'm "error 1334. Cannot install the file 'hispaniola_map.ddt' because the file is not found in the file ' Disk3C ~ 1.cab '. This may indicate a network error and the error reading CD-ROM, or a problem with this package. "The installation continues until the end of the progress bar, but it reads"Rolling Back Action"for about fifteen seconds before I got a"feature transfer error", which reads" error:-1603 Fatal error during installation. " Consult the help of Windows Installer (Msi.chm) or MSDN for more information. "Then, the Setup program stops and tells me that the game failed to install and my system has not changed. I cleaned the disk and it is in good condition. My computer also meets all the requirements for the game. I looked everywhere for an answer, but so far none has solved the problem. I tried to install it without the firewall and antivirus software running, in addition to install in safe mode. Any suggestions?
Hi void 1337,
Follow the suggestions below for a possible solution:
Method 1: I suggest that you put the computer to boot and then try to install the game and check to see if it helps:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2: You can also follow the link and check if it solves the problem:
Error message when you install a Microsoft game or a mapping program
http://support.Microsoft.com/kb/258496
You can also view the article mentioned below to learn more:
Microsoft games: InstallShield Error Messages
http://support.Microsoft.com/kb/910816
If the above mentioned methods do not work, then post your request in the age of the forum of the empire for further assistance:
http://Forum.AgeCommunity.com/
Let us know if that helps.
-
Title files: original vista on the recent items list does not open
When I select a file from my recent items list, I get an error message indicating that the file is not found, but it lists the correct path to the file, and if you go to this path of the file, the file is clearly there. This happens with word and excel files but not the adobe pdf files.
Hi GillianMO,
Remember to make changes before this problem?
Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
Diagnose and repair Windows files and folders problems automatically
Difficulty of broken desktop shortcuts and common system maintenance tasksNote: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
If the problem persists, I suggest you to send your request in the Forum Office for more specialized help.
Office Forum
http://answers.Microsoft.com/en-us/Office/Forum/Excel?page=1
-
"Could not apply the workspace because the file was not found."
I've just upgraded to the latest version of Photoshop (CC 2015.5). Some of my photoshop files does not open and I get an error message: "could not apply the workspace because the file was not found."
I have uninstalled/installed Photoshop CC 2015.5, I uninstalled and installed two previous versions of Photoshop, I reset my preferences, and I repaired disk permissions.
None of them worked.
What would it be?
Hello
Quick note giving clarification on the 2105.5.1 update: the error message that the OP has reported is inaccurate for the State. The update should simply fix the alert to note that it is impossible to open the file, instead of the misleading warning that a workspace cannot be applied.
We did not all patches to open a file that fails intermittently. We have still not an understanding of root to the problem the OP has been run in.
Kind regards
Steve
-
"Could not complete your request because the file was not found."
Hello!! I can't open any file .jpg in trial version Photoshop CC 2014. I get the error message "Could not complete your request because the file was not found."
.png and .psd files work perfectly well. Any help would be greatly appreciated. Thank you
Error: 'File not found' when opening JPEG files Link to the installation program Adobe Camera Raw 9.4.
-
I have a mac and I got this massage after I tried to save my cc photoshop photoshop system could not complete your request because the file is not found, can someone help me? Thank you
I installed the 9 raw and everything is back to normal thanks for your email about /peyman
Skickat fran min Samsung-enhet
-
PS: Could not complete your request because the file was not found.
Mac OS X 10.7.5.
PS CC 2014 2.2.
Since I've updated my CC of the PS today, I'm unable to open jpg in PS files, even the JPG files that I had no problem opening in PS so far. Whenever I try, I get the following error message:
"Could not complete your request because the file was not found."
(I'm able to open PSD files, however.)
Help someone? Much appreciated!
Which could result from the 9.5 camera raw update.
-
Error: Could not complete your request because the file was not found. Help!
I've updated Photoshop CC and now if I try to open any file (jpg, psd, etc.), I get an error message: could not complete your request because the file was not found. Files lived on a hard drive, then I moved into the office... still no go. PS I uninstalled and re-installed. Same mistake. Here are the best, I can open the files very well in my old Photoshop 5.1... Any ideas? Working on a Macbook OS X 10.7.5 (really hoping that I don't have not updated to El Capitan)
Hi banderababe,
Photoshop CC 2015 is not compatible on Mac OS 10.7.5, however if you only use the version of Photoshop CC, then you can try to reset the preferences of Photoshop back to default values.
"To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"
System requirements:configuration of Photoshop
Let us know if that helps.
Kind regards
Mohit
-
My subscription to creative cloud updated Photoshop the other day. My iMac is running 10.8.5. Ever since this update, I can't open a JPEG file and get a message indicating "could not complete your request because the file was not found." I'm sure it's related to the update, but how can I cancel it and get things to normal? (do not include your email)
Post edited by: Eugene Fornario title should be brief, but descriptive. No personal information in post.
Hello
Please refer to this article error: 'File not found' when opening JPEG files and try the workaround provided.
Let us know if that helps.
Kind regards
Assani
-
Cannot open JPG files in photoshop
Has anyone ran into this problem? Photoshop worked perfectly in the past and the other day I noticed that I can't open all the jpg files in Photoshop (tried all the usual ways to circumvent the opening problem), I get the error message: "Could not complete your request because the file was not found." I know that JPGs are fine, as they open in other applications. My work-around for the moment, is to open in preview mode before and export as a PDF file, then open the PDF file in photoshop, however, this is not ideal.
Someone at - it in the case, or have a fix
Any help much appreciatedDan
Hi Dan,.
Please install camera Raw from following link: Camera Raw of Adobe Photoshop CC and CS6 Installer
Once done, open file Jpeg, you shouldn't get the error more.
Let me know if it helps.
Kind regards
Tanuj
-
cannot save as # because the file is not found
Using photoshop elements 11 (updates are current) using window 10 operating system... after installation of the updates of Windows 10 (without a restore point saved... yes I'm a fool)... photoshop began to act up. On all but the drive root (C :), when I put them in a file jpg for editing and then try to save it with a changed name using the command file save as...) I get the message noted. It makes no sense since I am trying to rename the file by using the Save as command for a new unique name. The Save command works fine as long as I don't have to rename the file. The previously described problem does not happen if I do this using the main C: drive, but it occurs on all the other drives. E:, W:, Z; J: etc. I can't restore so I went to reinstall photoshop like my only option unless someone has a solution. Thank you
Reinstalled Photoshop elements 11 with no changes or improvements to the problem. I've found a workaround which is a pain in the Azz...
Whenever I have photoshop edit a JPG image, I always hit "save under" and add an E in the back of the name of the image... it always worked well until recently (as explained above)... to get the message "can not save as # because the file is not found". "" The workaround works is that a PAIN is to type "E.jpg" instead of just "E"...
-
So since the last update to the new user interface, I was not able to reframe my documents (patterns of web page) without getting the error "Could not complete your request because the file is not found" - the file is clearly there and can be saved, and I can restart photoshop and open it again without any problem, but still suffer the problem of harvest tool. Also since I shut down my computer and reopened it and it is not resolved. Any help would be greatly appreciated!
Happened to me - fixed by re - link the logos files that have been lost.
A. I wasn't expecting my dynamic objects related
(B) same as above
Easy fix, just look for small red icons on some of your layers - then right click > replace content > change 'em out
-
Try to make "the file is not found" go away
Hi all
I have a problem with some pictures.
My external hard drive crashed with a lot of pictures on this topic.
I can see the files preview in Lightroom, but the boring text "the file is not found" interrupt to take screenshots of lost so photos I have, even if they are not good for printing.
Can someone help me with this issue please?
This is the only copy of the photos that I have and they are of a marriage.
Best regards
RP
Thanks for the update.
There is no such way to do that "File not found" message go away.
It can only go away when you move these insights with the original images.
-
As noted above, immediately after you export an image in a file - if I want to go back to work on this image it just says that the file is not found. I have not changed the name of the file.
Also, after work on an image in Photoshop and saves a copy to the lightroom folder - I don't find it anywhere. It works if I save on the original image from lightroom, but if I save a copy I can't find it in the file anywhere!
Hi mayab13,
How do you export the image from Lightroom, because export image from Lightroom keeps the image in Lightroom.
Could you please tell me your step by step workflow.
Kind regards
Tanuj
Maybe you are looking for
-
I am running Windows XP. After updating to Firefox6.02 a second tab was there after my 'Google' default tag. The second tab contains the words "New Tab" on this issue, and when you click the 'X' button in the tab, it does not close. When you go to fo
-
cannot watch videos or play games
When I try to watch a video or play games online (game colony) it won't let me it says I need Adobe Flash, when I try to install Adobe flash, he says he can't because I use a 64-bit browser and I need a 32-bit browser... How can I do thisThank you
-
Original title: cannot install the game... Tycoon2 Zoo, said, cannot get the code for enu.dll installation language Can someone help me with this problem, or I have to buy a new game?
-
Windows Explorer - file attributes
In Windows 7, Windows has additional Explorer can be put on columns - which is the comment column. How we do add a comment to this column. There used to be a summary page under properties where the comment could be added. The other attributes are
-
How to reduce the size of the file CPTX in 8 Captivate?
Hi allHow to reduce the file size of my .cptx in captivate 8? It is the size of the cptx 380MB file, but what I have inside are only a few images to start a new module.I deleted all unused items in the library and I have only 4 slides with some image