The file name change DSC?

Similar Questions

• The file names changed on computer are different once the download to the player

  Recently, I've cleaned more than 600 + songs on my player to make more room for new music. I downloaded several songs from different sources (as usual) (I use my rocket for music and nothing else) and changed their names into something I woud download original recognize. When placed on the device, the file names will appear in cryllic, half recognized Japanese or a series of numbers.

  AND the songs newly added to the "rocket" do not appear in the upper part of music recently added as it should (until I deleted the player off)

  My computer does not recognize the Fuze 4 GB, I was recently using a miniSD 2 gb, but the recent downsizing rendered useless until I have run out of space.

  ... I think that's all... What should I do? Its very annoying and I would LIKE your comments!  Help, please!

  Just guessing, but have you changed the names of the new music FILES?

  I think you will find that the displayed info song comes from tags in MP3 files.

  You can change these if you want to... There are publishers of available MP3 tags, I've been using

  a program called "MP3tag", oddly enough.

  You can also add album art using this same program.

  Have fun

  LyleHaze

• The file names changed in wingdings, including the file extension and I can't delete, change them, open, etc. Here are the pictures.

  Have (had) a file with multiple files it contains with pictures in each file.  A week ago the pictures were there.  Now, the names are replaced by wingdings as names and file extensions.  When I try to open it, it is not accessible and that the file name, directory name or volume label syntax is incorrect.  When I try to delete it, it says that the file name you specified is invalid or too long and specify a different name.  When I try to rename it, it tells me that if I change the file name extension, the file may become unusable.  If I try to change anyway, it says I've specified file name is not valid or too long.  Only tried for the name 1.  I did a restore in the case where a program interfered with that.  However, nothing has changed.  All of the suggestions.

  You can download and try to delete the file Unlocker http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtmlwilh.  Although it is not designed for this particular circumstance, it may very well work in all cases, as it has been very successful in a wide variety of situations are not specifically highlighted in the directions (where do not work the normal Vista options).  NOTE: Some antivirus flag programs this program as a malware, but it is a 'false positive' and is safe to use perferctly.  My own software to flag, but several other well-known software products it clean and the warning is included in the documentation of the program.

  I wish there was a way to save the images, but at this point, it seems that the only option is to delete because you can't rename files EHF (if this option is available-I hope that work above).  Unfortunately, System Restore does not affect the files of data, so even if a program caused this, System Restore can eliminate the cause, but it would not restore the files to their previous names.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky because they retain the files called snapshots http://windows.microsoft.com/en-AU/windows-vista/Previous-versions-of-files-frequently-asked-questions.  It can be used to recover previous versions of files that have been changed or deleted accidentally.  Here's how: http://www.microsoft.com/windows/windows-vista/features/shadow-copy.aspx.

  If you have Vista Basic or Premium of Vista, you don't have a shadow, but there is a free program for you that does essentially the same thing called Shadow Explorer: http://www.shadowexplorer.com/.  I suggest that you download and implement as soon as POSSIBLE to protect you if you accidentally delete or modify a file.  It will not help you in this instance, but it can help save the next time.

  I'm more concerned about why this has happened in the first place and prevent it from happening again.  I saw file names change before, but never of wingdings which then do not let you open, edit, delete, or rename.  We will check some of your system files: go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  If you find any these corrupted files, try to post them here.  Maybe we can replace the good files on the disc.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer about the name change (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work - but it will probably not fix your renamed files.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• prevent the file name change and auto complete field

  With the help of Acrobat DC Pro.

  Is it possible to prevent a user from changing the name of an acroform file if they save or save as?

  If it is not possible to prevent the user from changing the file name, is it possible to automatically fill a form field with the new file name when saving, or when you submit the pdf?

  I hope someone can help.
  

  Avoiding it is not possible.

  However, you can prevent the submitted file if it has a

  different name. This would require using a script, however.

  It is also possible to set the field to display the file name, by using this code

  at the level of the doc:

  this.getField("FileName").value = this.documentFileName;

• The file names changed in wingding type of letters. How do I reverse this order to access file information?

  I was copying some files to my flash drive and when finished I clicked on the button to remove it safely. A msg came up saying that I had to try it later and when I did, I did. When I put my disc on later to view some of my other files, I saw that many of my files are now empty and have file names that resembled letters of wingdings. How to I reverse this so that I can reuse my files?

  Hi LTLDREAMER1025,
   
  Analyze the flash player. Your description indicates that your drive has been infected by the virus or malware.
   
  You can use the Scanner from Microsoft to do the same.
   
  Visit the following link for the scan:
   
  Microsoft safety scanner

• I want to change the file name format "save under" so the date and time are first.

  When I select a few emails and then select "Save as" to keep a copy on my computer, the name of the file that is created has the date and time at the end of the file name of the email.
  Sample "save under" file name: "Habitat Follow Up - Bryan ([email protected]) - 2011-11-15 0744.eml.
  Is it possible to change the structure or format of the file name if the date and time of the email are initially the file name?

  Try ImportExportTools and customize the format of the file name in the options.

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• The file name looks like has changed, but not really

  I have several video files, I created and then changed the name of. The name seems to change in the finder, BUT when I open in VLC or drop it into itunes it shows the original name.

  There must be another place, the name is stored (in the file?)

  Any help?

  There is a title within the video file.  When creating, this is the same as the name of the file, but change the name of the file will not change anything inside the file.

  To change the title, right click on the file in iTunes, select "Get Info", change the title in the Details tab, and then click OK.

• Can I change the file name of the .bar file

  Hello

  I built an application in Release for device mode.  He prodcued a filenamed bb10app.bar. Is it possible to change the file name to tell xyz.bar after it is built.  It is an application internal meaing only avaiable to our staff.  If I do not file name change how will I know what app it is. Given that bb10app.bar seems to be a default file for any application name.

  Thank you

  Joe

  Yes, you can change the file name of the file BAR, just keep the .bar extension and you shouldn't have any problems.

• How can I change the file name on the home page?

  I'm changing the file name of the home page...

  I'm on page properties > options > filename... but he is frozen as index.html

  Is there a way to change that and name it something else?

  Hello

  As most web servers consider index.html as the site's home page, the option is grayed out in Muse to rename indexes (homepage).

  How ever, you can go ahead and change the name to other pages in the site map.

  Concerning

  Vivek

• How can I change the unrecognizable FrameMaker file format?  Why has he become unrecognizable after changing the file name?

  I update an existing project in the FrameMaker10, which is located in a structure of book.  I changed the names of the files in the directory, they upgrade 11 FrameMaker and saved.  When I try to add them to the book (whose name I also updated) a problem for some files. When I try t add them to the book file, I get an error message that says that the book file is unrecognizable.  (It allows me to add it, but it appears in the file book with an icon that has a blue "M" in there.)  Why is that happening and how can I change these files to normal FrameMaker files?  Thank you.

  Try to open the problem files using a text editor or viewer of files to see what the first bytes contain. Contains all the binary files valid FM FM 11 in the first bytes of the file.

  During the updating of the books, it is sometimes better just to create a new address book file and add files to it.

  When you rename files in a book, changes at the level of the system will break any links/cross-references between files, so it is always best to use the option rename book in the file to change the names of files FM. This will keep the correct links.

• How can I change a SINGLE CHARACTER in the file name?

  I have in the Panel right side meta tag a file name, the original name and copy name field.

  The file has been renamed already. So I'm not interested in original file name, in any case I can't click on it.

  "I would like to change a +! / « % / « + ! CHARACTERS in the file name field which is 50 characters.

  If I click on it gives me a window of batch renaming.

  If I click on the name of the copy that I have to write everything from scratch BECAUSE I can NOT COPY the file name field.

  So here we are in the 21st century

  I have a solution: I copy the name of the file from the vista Explorer and paste into copy name BUT what if I do this hundreds times?

  First of all, bringing the name of copy to do with the file name? I think you are badly understand the purpose of the copy name field. It's to give a virtual copy a distinctive name.

  Now for the naming of the files is... If I understand, you want to change the name right in the metadata Panel, but the file name field is not editable. It is a bug. It is exposed when you have multiple selected files and change the display of the metadata Panel. You can fix it temporarily by selecting a single file in the grid and change the display of the metadata Panel of any defect or vice versa (see the attached screenshot). Now that the field become editable, you change the character.

  If you want to for hundreds of files by using a template, then would be nice if you provide your source and target file name patterns.

• Why UTL_FILE changes the file name of the file while sending UTL_MAIL?

  The script below opens a file and writes to a variable ("text") and then later the UTL_MAIL is used to send the attachment to a recipient.
  The name of the original file is "ap_report.txt".
  The name of the file that is received when email is one generated as random filename (ATT06878.txt or ATT42730.txt), it changes each time the script is run.
  
  This creates a problem for recipients because they do not recognize the file name. How can I keep the preserved file name as it is before being sent - "ap_report.txt"?
  

  DECLARE
     fhandle                       UTL_FILE.file_type;
     vtextout                      VARCHAR2 (32000);
     text                          VARCHAR2 (32000);
     v_message                     VARCHAR2 (2000);
     v_output_file_path            VARCHAR2 (200);
  
   /* Open the output file in Read mode */
   BEGIN
     fhandle := UTL_FILE.fopen ('/home/ldcgroup/ldccbc/ORALOAD', 'ap_report.txt', 'r');
     LOOP
        BEGIN
           UTL_FILE.get_line (fhandle, vtextout);
           text := text || vtextout || UTL_TCP.crlf;
     EXCEPTION
           WHEN NO_DATA_FOUND  THEN
              EXIT;
        END;
     END LOOP;
     UTL_FILE.fclose (fhandle);
  
      /*Calling UTL_MAIL.send_attach_varchar2 to send the output as Email attachment */
     UTL_MAIL.send_attach_varchar2
     (
       sender          => '[email protected]',
       recipients      => '[email protected]',
       subject         => 'Testmail',
       MESSAGE         => 'Hello',
       attachment      => text,
       att_inline      => FALSE
      );
  END;
  /

  You must use the last parameter of UTL_MAIL. SEND_ATTACH_VARCHAR2:

  UTL_MAIL.SEND_ATTACH_VARCHAR2 (
     sender            IN    VARCHAR2 CHARACTER SET ANY_CS,
     recipients        IN    VARCHAR2 CHARACTER SET ANY_CS,
     cc                IN    VARCHAR2 CHARACTER SET ANY_CS DEFAULT NULL,
     bcc               IN    VARCHAR2 CHARACTER SET ANY_CS DEFAULT NULL,
     subject           IN    VARCHAR2 CHARACTER SET ANY_CS DEFAULT NULL,
     message           IN    VARCHAR2 CHARACTER SET ANY_CS DEFAULT NULL,
     mime_type         IN    VARCHAR2 CHARACTER SET ANY_CS
                                             DEFAULT 'text/plain; charset=us-ascii',
     priority          IN    PLS_INTEGER DEFAULT 3,
     attachment        IN    VARCHAR2 CHARACTER SET ANY_CS, ,
     att_inline        IN    BOOLEAN DEFAULT TRUE,
     att_mime_type     IN    VARCHAR2 CHARACTER SET ANY_CS
                                             DEFAULT 'text/plain; charset=us-ascii,
     att_filename      IN    VARCHAR2CHARACTER SET ANY_CS DEFAULT NULL);
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/01/31/le-direttive-di-compilazione-pragma/]

• Titles or subtitles of the file name?

  Is it possible to automatically generate the titles or subtitles of the file name? I have a video made up of several small files and you need to insert their names under the name of a chapter, or at least as a subtitle. FCPX only supports to support the generation of TC.

  The short answer (obtuse) is not. Not in FCPX alone.

  I seriously doubt you will be interested in this procedure, but someone might be.

  You need movement (this is the only expense here), TextWrangler and a droplet of Automator (see below).

  First, gather all your files of clips in a folder.

  Drop the file on the files in the folder (the automator app/drop) that will create a text file with the names of all files in the folder. When you are prompted to save the file, you can name it and save it wherever you want.

  Gout Gets the names of files from the Finder, and they are complete paths, such as:

  / Users/fx/Desktop/txtLicenses/Aardvark Cafe readme.txt

  [You can download a copy of the 'Files in the folder' drop HERE ]

  Open a window in TextWrangler, and then drag the text file to a blank page (very cool - TextWrangler automatically opens the file with drag and drop.) [TextWrangler is FREE of Barebones.com (http://www.barebones.com/products/textwrangler/) software, everyone should have a copy! The most recent version is 5.0.2 in date 25/12/2015]

  Type the command + F to open the Find/Replace dialog box. Make sure that Grep is checked.

  To find them, use this regex:

  .*\/(.+)\.. +

  [translated: find everything up to and including the last ' / ' character, can find everything up to the last period and save it as a game (the parenthesis) and then find everything at the end of the line]

  As an alternative, use:

  \1\n

  [Translated: prints the substring and adds a newline character - it will be double space lines of text]

  In the drop-down menu with the label of 'g', save... (model - something like Remove Path and FileType) so you can find it again easily.

  The text from the above example will become:

  Aardvark Cafe readme

  [and will follow an empty line]

  [I recommend you do all your spelling at this point.] Make sure that all text is as you want it to appear in FCPX. Repair later gets a bit dicey. and generally it is a good idea to start over if you need to make changes to the text file.]

  Save the file with another file in TXT format.

  On the move:

  Create a project generator. It can be almost any length, so accept the default value of 10 seconds. You will be stretching out in FCPX in any case.

  Add: Generators > text > file

  [You can use the Inspector to Format to choose the font, size, etc. and the inspector looks for color and 3D options].

  In the Inspector of the generator, find the section, load your text file

  Set the speed to Custom

  Reset the Custom speed setting

  Publish the speed of Custom setting slider

  Save in FCPX (and create a category called subtitles)

  When you save the generator in FCPX, the file being used is hard-copied in the media for access folder. You cannot publish the setting browse generator, so all files subtitles prepared in this way are projects of "One Shot". You can throw away them once your project is completed because their utility essentially died with the FCPX project.

  In FCPX, apply the generator to the plot and develop it to adapt to the length.

  Keyframe of the lines of text to match the timing of your video. This is where double spacing will be useful because it is a real pain in simple lines of keyframe and you will need a bit of space for a step-by-step. You can, of course, import the audio portion of your story in motion, create a project for quite a long time for the entire length and key image subtitles in movement. You can export as, eventually, the subtitle project as ProRes (if you do not use 4444, then you can apply the Composite blend mode add to the layer that you use in FCPX as the background should be black.)

  If all of your clips are the same length of time, then using the subtitle generator is a snap. Set a keyframe at 0 for the appearance of the first line and in the end, the last line should appear, simply drag the speed until the last line shows control (should be at or close to 100%). The generator systematically displays a single line both throughout the progression of his 'read'

  I found that the faster is to import the audio in motion and create a Motion project, the length of the audio used for subtitles + a little extra at the end.  Listen to the audio, and for each line that you display, add a keyframe... little whatever it is. When there is a keyframe for each line, listen again and adjust keyframe values to display the line. This will leave you with linear transitions from one image to another key (and overlapping in some cases, or the appearance of lines before image real key because of "Rounding errors") - is NOT a problem! Just select 1 keyframe, type command + A to select all the keyframes, and then right-click on a keyframe and select constant on the menu drop down. This will create a step-by-step through each value and you give the * discreet * timing you have need for the text to appear at the right time.  Remove the audio track and save the project as a generator of FCPX... it is faster and easier to export a track video overlay.

  You need movement 5.1.x or better (there are serious problems with 5.0 versions and file generator.)

  I know it doesn't look like it, but this method of captioning is much easier than ANY other software of captioning I've tried in the past... NO timecode or the special formatting is required... other recommended spacing to double.

  HTH

• To sort the list of files by time not the file name.

  Original title: created the new toolbar on the sort option for changing the taskbar.

  I created a new toolbar on the taskbar, and it is directed to a folder in my network. When I click the new button on the toolbar, it opens subfolders sorted by filemane. Then, open the sufolders with files sorted by filemane.

  I want to sort the list of files per hour not the file name. is it possible to change this?

  Here's what I did.

  I right click on the taskbar - selected toolbars - selected new toolbar - selected the folder on my network.

  When I click the double chevron right the new toolbar button, it opens the files in this folder, and then I select a subfolder and an another subfolder then the individual wave in this final folder files. There are more than 300 wave files in this folder. It sorts thenm by file name which is a randomly assigned file name by the used recording software. I want to sort the files by time instead of file name. is this possible?

  Hi Jeffrey,.

  How many computers are present in the network?

  You can follow this link & check id the issue persists:

  How to arrange files using folder views in Windows XP?

  Reference: The order of sorting files and folders whose names contain numerals is different in Windows Vista, Windows XP and Windows Server 2003, in Windows 2000

  Hope the helps of information.

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747