I want to change the file name format "save under" so the date and time are first.

Similar Questions

• cannot change the date and time in the system restore

  How can I change the date and time in the system restore? When I try to create a new restore point, I can't change the date and time, the system automatically date and time in.

  System Restore will always set the date and time of any restore point created at the effective date and time of the machine.

  If you want to restore your computer to a date and an hour earlier, you must select restore from a restore point that was created at the earlier time.  This article explains how.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  My apologies if I misunderstood your question.  Why should change you the date and time when a restore point was created?  The only possibility of achieving a fictitious date and time will result in a change as actual date and time Windows or in the Bios, either option with unforeseen consequences.

• Can I change the date and time on my account?

  Is there anywhere on this site where I can set the details of the date and time?

  When I posted a recent issue, the date and time were incorrect IE not my country date & time.

  Thank you

  Sylvia

  PS Sorry if this is the wrong place to post this question, not that the possibilities of passage are really there?

  The date and time are universally on us Pacific time zone. You can't change it.

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• How can I change the date and time on my HP officejet pro

  How can I change the date and time on my HP Officejet pro?

  I'll be gald to help you in this situation.

  What officejet do you have?

  You can go to the settings on the printer screen.

  1. click on Setup

  2. click on Preferences

  3. choose the Date and time

• my computer continues to change the date and time

  my computer continues to change the date and time even after I set it correctly. I am running windows 7 Professional. Thank you

  Hello

  ·         Since when are you facing this problem?

  ·         Did you the latest changes on the computer before this problem?

  Method 1:

   

   

  The date and time in the BIOS settings may be incorrect.

  Important: Change BIOS (Basic input output system) /(CMOS) complementary metal oxide semiconductor

  Settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can see this:

  
  Incorrect time is displayed on 64 bit versions of Windows 7 or Windows Server 2008 R2 after upgrading on-site

  http://support.Microsoft.com/kb/2001086

  Method 2:

   

  I suggest you replace the CMOS battery. If you are not comfortable with that, then I suggest you to contact the manufacturer for assistance.

• Photos do not sort by time when the Date and time are adjusted

  I'm the combination of images of my friends with those friends, using Mac Photo of OS X V10.11.4. Because the dates of our cameras vary, I used "Image, set Date and time" to change the dates of the imported pictures. When the dates and times are adjusted, the photos are sorted by date no time. Added photos changed the given date are sorted at the end, regardless of time stamp. The sort options in the pictures leave much to be desired.

  Where are you seeing this? All the photos are sorted by date/time, the photo has been added to the library - Photos (years/collections/moments) are sorted by date/time pictures

  You can select the photos of interest and create your own album of them and then sort but title ascending or descending or by date

  LN

• Vista-the date and time are reset to dec 2007

  Whenever my computer load now, the date and time are reset to dec 2007 and I continue to have this change manually. I am owner of Acer - windows Vista purchased in 2008. Help, please!

  Hello

  This time is normally caused by a battery CMOS failed in the motherboard.

  Time/date settings are preserved after turning off the power when that battery works

  They are a piece of currency-sized battery and cost about $5 to buy.

  "How to replace the battery CMOS.

  http://www.computerhope.com/issues/ch000239.htm

  See you soon.

• Want 5660 - how to change the date and time

  During installation, I thought that I had chosen the date and time.  Not happened.  After that installation is completed how to make these changes?

  Hey @Americanpioneer,

  Welcome to the Forums of HP Support!

  I understand that you would like assistance setting the date and time on your HP ENVY 5660 e-all-in-one printer. I would like to help you today with these two settings properly.  Please follow the steps below to set up your date and time.

  1. With the printer on, use your finger to scroll to the left on the touch screen (such as a mobile phone) and you will see the installer
  2. Select Setup to access the Setup menu
  3. Then tap Preferences
  4. In preferences, you will see now Date & time
  5. Contact Date to change the date on your printer
  6. Affect the time to change the time on your printer

  Please let me know if these steps don't resolve your problem. Good luck!

• When system startup until the date and time are wrong

  When I boot up I have the wrong system time and date of that change that and everything works fine but when I stop computer and restart the same thing happening again any info would be appericated thanks

  When your time is not known after him turning off your computer, this is an indication that the battery on your motherboard must be replaced.  Open your case and look for a button on your motherboard battery and replace it.  Most newer computers use a CR2032 - the same that is used in the garage remotes and keyless entry for your car charms.

  HTH,
  JW

• Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

  Hello

  Someone knows how to change the time on a LaserJet MFP M127fn Pro?

  Thanks in advance!

  Sean

  .

  Hi @SeanKaneFLA ,

  I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

  This information was given by the manual on page 45. MFP LASERJET PRO.

  You may have configured these settings when you installed the software. You can configure these settings
  at any time by using the control of product or the HP Fax Setup Wizard panel.

  LCD control panel:
  1. on the product control panel, press the Setup button.
  2. Select the System Configuration and then select Date/time.
  3. Select the clock in 12-hour or 24-hour format.
  4. use the keypad to enter the current time and press the OK button.
  5 Select the date format.
  6 use the keypad to enter the current date and then press the OK button.
  7. Select Fax Setup, and then click Fax header.
  8 use the keypad to enter your fax number and press the OK button.
  NOTE: The maximum number of characters for the fax number is 20.
  9. use the keyboard to enter your company name or header and press the OK button.
  NOTE: The maximum number of characters for the fax header is 40.

  (Windows) HP Fax Setup Wizard

  1. click on start and then click programs.
  2. click HP, click the name of the product, and then click Fax Configuration Wizard.
  3. follow the on-screen instructions to configure fax settings.

  I hope this helps.

  Good day!
  Thank you.

• How can I print my photos displaying the date and time stamp

  I have pictures in a legal context but do not understand how to print them displaying the date and time stamp.  The timbre of the date and time are necessary for me to present my case exactly.  Can someone tell me how to print with these marks.

  Thank you

  The following instructions will prepare photos
  with the EXIF Date/time stamp then you can print
  them.

  FastStone Image Viewer freeware can add
  EXIF Date/time in the face of your photos in a batch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm
  (Windows XP / Vista / 7)

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  After FastStone is downloaded and installed...
  Open the program and go...

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)
  (the text size will need to be adjusted according to the)
  the size of the photos)

  Open the window drop... "Insert a Variable."
  choose... EXIF Date Time / Date and time...
  (in the white field you should see ($H1)
  Left click... Ok

  On the Batch tab convert... in the left field...
  Left click the square button "select the Source folder.
  Find and select the photos you want to
  Add.

  Left, click on the Add button to move the files to
  the right field.

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  It's much easier to do than to explain then
  give it a try before say you "Good Grief... it's too
  a lot of work.

• My HP Officejet 4630e all-in-one does not print the date and time on the fax header

  I followed all the instructions of configuration / Date and time are set correctly but only name and phone number show on the fax header when sending fax.  How can I get the date and time to print as well?

  Thank you for your help

  Hi doggynut4,

  Welcome to the HP Support forums.  I understand that you want to add the date and time to your fax header.

  Your user guide indicates that only the name and fax number can be entered for the fax header (found on page 49). I even confirmed this on my Officejet 4630.  I apologise for any inconvenience this may cause.

  User's Guide e-All-in-One Series Officejet 4630

• Add the date and time to a photo

  How to add the date and time to a photo or contact sheet in OS X El captain?

  KADRI

  Christiana

  You want to write the date and time in the photo?

  You need to do it in an external editor.  Photos can't.

  You can print the date and time and other legends on a Board-contact, however.  When you select a photo and then use the model of the "Contact Sheet", you can click the 'Captions' button and select the metadata to use as the legend on the contact sheet.

  

  To write directly to the photo, you can use the Preview.app.

  Export the photo to go to Photos and then open it in preview or install the extension of"external editors" of the App Store. Then you can open preview directly from the Panel of editing in Photos.  See this tip for user: external photo editors are here

• A possible solution for the Date and time January 1, 1970 Bug?

  I fell for a scam currently floating around the Internet, this type of scam to change the date and time of an IPhone on January 1, 1970 made my IPhone stuck in a boot cycle. people use the term "brick" of the nature of bugs. I was curious if there is no fix?

  Put the phone in DFU mode:

  http://www.payetteforward.com/how-to-put-iPhone-DFU-mode/

  You will then need to reload all your data from your back upward.