the first project window displays is not the EFFECT button

Similar Questions

• Explorer Windows displays is not the content of the folder

  I use a new version of Windows 7 on a new pc. Windows Explorer does not work correctly.

  After the installation of several programs, I saved files in folders
  c:\Program Files (x 86) \ "program name".

  The recorded files do not appear in windows Explorer. Curiously, if I look at the contents of the file in another program by using the command open the files are there.

  Essentially, windows Explorer displays all files in a folder, regardless of how many times I update the file, restart the pc, run windows update, uninstall and reinstall programs, show hidden files...

  So far, this has happened with two different programs so I think that it is independent of the specific programme.

  What is happening and how to fix it?

  The best standard practice is for files program for the program, then the data stored in your Documents folder (or at least inside your user profile folder).  In this way other users can use the same program and their info is separated (they can not access your user folder).

  There are a few ways around it.

  1. I would really do anything you can to simply store your data, separate from the actual application.  But that's just me and I am the ultimate sheep: I do all that the gods of Microsoft tell me to do, ha ha ha.

  2. you can install the program in a folder where you already have a full write access.  For example, to install the program on C:\Users\Name\Programs I (in other words, make your own folder).  Since it is installed in a place that is not a system protected (such as Program Files) folder, Windows won't try to protect yourself.

  3. you can turn off UAC, which I think (I'm not 100% sure) also disables such things of virtualization where tricks Windows programs into thinking they have write access to a folder that they are really blocked since.  Really, I don't like this option because it removes virtually the last decade of the evolution of the security.  UAC has detractors, but Linux and Mac have had for 20 years: I think it's a good thing, we finally too.

  PS. This is probably one of the biggest things I wish more people knew: the folder redirection.  Even most programmers are not aware, which is kind of scarey :-)

  If this was helpful, please vote. If it solves the problem, please click on propose as answer. Thank you!

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.

• System Image recovery files Windows displays is not in the list of files in recovery

  Windows 7 Professional - to date from Windows update.

  I just create a backup system on a USB hard drive external image. Looking at the USB directory for the backup watch directory that it - there is a folder with the name of the current computer.

  If I then try to restore the backup on the same disk, from the control panel GUI or from a Windows recovery disk recent backup does not appear in the list of available to restore images.  Other backups of different machines that have been recorded on this disk image appear in the list!

  Any ideas?

  Problem solved.

  The external USB hard drive had a backup failed on it.  If you have made a list of directories to BACK of all the backup files to image the external hard drive, you'll see all the backups but system restore image didn't show those until the backup has failed/corrupt.

  Remove the backup directory tree failed then permit restoration System Image list all available external hard disk backups.

  Thanks to all who watched this and helped.

• Bridge CS5 Windows displays only not the files with the command ' move to '?

  Hi, people.

  I have a bunch of files on a connected USB external drive.  When I right-click on an image in Bridge and select the "Move" command, Bridge gives me only the option to select a folder on my desktop (specifically, only my user name folder).  It only gives me even to choose my root diretory.

  Everyone knows this?  For what it's worth, I notice the same problem with DNG Converter (I can't choose any file which is not my office).

  Any help would be appreciated.

  Thank you!

  -Greg

  P.S. I recently deleted my cache of bridge, but the problem started before I did this and still occurs.  Win 7 64 bit, 12 GB RAM, cache in Bridge set to maximum settings.

  Check out this and this thread

  Your prob could be linked to the same question. Especially because you mentioned the DNG Converter.

  To solve reduce your items from the desktop or upgrade to DNG / ACR 6.3 beta.

• After you have accidentally deleted some files Windows display as not authentic

  Original title: windows not showing did authentic not

  I accidentally deleted some files in the c drive and now my windows is showing that its true not... Please tell me what to do?

  Check your Recycle Bin and see if the file is there... If so, restore it.  If this is not the case, try to activate again.  Type slui.exe 4 from the run prompt and reactivate over the telephone.

• 8.1 Windows displays only not in Store

  I already reinstalled 2871389, do you have a sfc/scannow, made a wsreset.exe but Windows 8.1 is still not available in store Windows from my desktop PC. I checked that I have updated all Windows, Windows 8 Pro active updates. Etc.

  However, Windows 8.1 is available in the Windows of my Toshiba laptop store. They have been reformat using the same Windows 8 Pro 64 bit ISO. How is my laptop can be updated to Windows 8.1 but my office is not?

  Hi Leesansala,

  Thanks for posting your query in the forums of Windows.

  I understand that you are facing problems with access to the Windows Store and PC settings on the computer.

  I will help you solve the problems.

  You could deal with this problem for several reasons as corrupt app Store Windows, if the Cache store is not deleted and if there is any set of proxy connection. I would suggest trying the following steps and check if it helps.

  You can refer to the suggestion made by me in the following links and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/Windows-8-apps-and-app-store-not-opening/f87bf47e-7150-420B-B91A-c49309a74b24

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/PC-Settings-closing-automatically/a791cc66-416c-4B77-BFA1-e6637ba02549?msgId=6dd956b1-936a-4002-9029-4d71001791e2

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Windows Update does not update installation button

  Windows 7 - I swapped a hard drive with my current Windows 7 in a new computer and after updating all the drivers all the software works fine - with the exception of Windows Update.  It will be open and selecting "Check for updates" works fine and when I click on the link below the nagging Windows 10 "view available updates" I get a list of the necessary updates.  I can click on the part or all of them - it does not matter.  It shows the number of selected down updates so I press 'OK '.  I expect to get a page with the "Install update" button, but instead of getting the same page with the Windows 10 nagging box with "Get Started" and the "view available updates" again, but none touch actually download and install updates.  It has always worked fine before.  If I come back on "View available updates" it shows those I chose, but no download anywhere button.  I tried the Windows Update MS repair tool and it ran very well, but made no difference.  What else can I try since I don't have the ability to install more updates?

  Hello.  I had the same problem and it is easily fixed.  It is unforgivable you tried to jump through hoops and given a such run around.  Go to "Ask Leo" online and search for GWX Control Panel.  It can be run as a stand alone from your desktop.  It will show you how invasive Windows 10 is on your system and remove what you don't want.  It can also monitor for divisive Windows 10 future if you wish.  I just did and immediately my list of updates needed was available, the missing horse screen and the button install updates is visible once more.  I hope this helps you and others.  Good luck!

  I was about to start installing my updates when I noticed the sneaky checkmark upgrade to Windows 10!  I had unchecked the box previously, so be VERY careful the checkbox is disabled if you are not ready to move to this new operating system.  In ADDITION, uncheck KB3035583 which is setup for the nag screen Windows 10.  I can never pass because of Microsoft VERY practical contrary to ethics and intrusive.

• Updates to Windows during the stoppage has not taken effect and the same updates (16 of them) keep coming back in the next restart.

  Original title: Windows updates has not taken effect.

  My Windows updates during the shutdown did not effect. The same updates (16 of them) keep coming back in the next restart.

  I tried fixed it 50461 mentioned in one post, but the problem persists.

  Any help to appreciate.

  Hi Lee CC,.

  1 windows operating system you are using?

  2. you receive an error code or error messages?

  3. Why have you tried the Fixit 50461? Have you received a 646 error?

  This problem can occur if updates failed to install.

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  You can also read the following article and check if it helps.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Firewall Windows with advanced security rules do not take effect immediately?

  Hello everyone, I seem to have a problem with the Windows Firewall with advanced security. I put a rule that should prevent some IP address the ability to send packets to any port on my pc, however, it doesn't seem to work, said ip was still able to send packets until I installed the third-party firewall. That's what 'the netsh advfirewall firewall show = rulename rule name' indicates:

  Activated: Yes
  Direction: in
  Profiles: Domain, private, Public
  Group:
  LocalIP: all
  RemoteIP: x.x.x.x/32
  Protocol: all
  Traversed side: No.
  Action: block
  Protocol used to send packets was UDP.
  Is it normal that the rules from windows firewall do not take effect immediately?

  Thanks for the reply, I checked the Windows Firewall service, it is set to automatic, and two long-term services are started (BFE and MPSDRV). It turns out that the PC was connected to the Public network, while the Windows Firewall has been enabled only for the private profile. Activation of the firewall for the public profile, did the trick.

  Thanks for your comments.

• Why does my merged project display 2 table of contents for the first project/start?

  I use RH8 and windows 7 and generate Webhelp

  When I generate my merged project I get 2 table of contents of the first project. When I click on other merged projects disappears from the table of contents 2^nd and all is well.

  Also, I can't return to my first / start window.

  Here is what I created:

  Main folder

  Parent

  Children

  Project 1 (this is my start/welcome page)

  Project 2

  Project 3

  Project 4

  My Parent file in the table of contents contains new projects and looks like this:

  Project 1

  Project 2

  Project 3

  Project 4

  The only section in the parent file is empty and I put in the following redirection according to the instructions on the site grainge:

  "< meta http-equiv ="refresh"content="0;url=./mergedprojects/project1/project1.htm "/ >

  How stop the TOC 2 on the first page of the project start and how do I display so I can access it later.

  Any help is appreciated.

  Pat

  The start page is not a topic. This is what opens the three components and the topic you see in that is the default theme.

  By default, HR takes the name of your project and which initially applies the page so if your project is called redrabbit, the start page will be redrabbit.htm.

  Many authors can call the redrabbit of the theme by default as it is the name of the project and it seems logical.

  Problem is when the wizard attempts to use it as the default value for the start page, the name is used for the number 1 is added.

  This means that you end up with redrabbit and redrabbit1. If you look in the wizard, you will see the name of the start page, first on the ground. You do not redirect, that redirect you to the default topic that is longer than down in the page of the wizard. The index is that the field is called the default theme.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Monitor project and timeline window titles do not appear in the new project?

  The sequence program monitor and timeline sequence 01 does not appear on the opening of the new project, eventhough checked in the Windows space.

  All existing projects are showing the correct disposal and can be used, but I can not activate a new project except import clips into the project window.

  Any help would be appreciated.

  Operating system is 64 bit i7 and program CS5.5.2 Premiere Pro.

  Is to say, the space is there but no info that is to say, lines, titles etc. of chronology to insert clips or display in the monitor?

  Post edited by: Bob ten photographer

  Simply create the timeline (sequence) of one of your clips. In this way, it's a perfect match.

• Firefox opens in a tiny window and will not resize. Only the upper right corner displays a.

  I uninstalled and reinstalled the program, but I still get the same window that displays reduce, restore and exit buttons. Get out and minimize the work but the food is not available. Resizing does not work. I can't go to all the controls in the program to make changes or run a troubleshooter.

  The computer problem I worked who had the problem wouldn't me be enough window to reach all the controls in Firefox. I ran virus scans several times and does not solve the problem although I found a bunch of threats and malware. Finally, I've isolated a purchasing department that I was able to uninstall program. That solved the problem with Firefox. It was Shopz. Unpleasant things.

• I am trying to add my Linux netbook to my sync account, but both my windows computers will not display the "Add Device" button in one of the sync management screens

  I'm trying a new version of Linux on a net book I use to play with non windows OS. In the process of setting up the new OS install I wanted to make my Firefox account set up so that I didn't have to spend a lot of time working on something. I'm no stranger to sync of browser and several of my computers and tablets with a number of different OS tied to the account with little difficulty in including the Firefox of the previous generation of Linux that has been on the net accountant. The problem is now that on both my computers in the main, a windows 7 and a desktop tablet windows 8.1, both running the latest Firefox, I am unable to find the 'Add a device' button in the synchronization of the management screens. This includes browsers built in display options as well as the Firefox manage account page. The first gives me options to disconnect the account, go to the maintenance screen, several checkboxes that you can synchronize to the device name. The management, after the login screen, don't give me options for the disconnect, change password and delete the account. Any help to understand why the add device button seems to be missing from these two devices would be greatly appreciated.

  Please check the version of your Installation of Firefox. (can be found by clicking on the main menu, or by clicking or hovering the cursor over the help button, and then click about firefox in the submenu). According to since how long you configured synchronization you can still use the old version of sync. Firefox 29 has introduced a new (and I would add a lot less tedious) version of sync. See this Mozilla support article for more information on the upgrade of your sync to the new version.

• Try using the Vista upgrade disc supplied with the system displays error Windows version is not authentic

  original title: with Acer Aspire Vista Help
  Well, here's the story, I bought an Acer aspire T180 a few years back from Best Buy with Windows Vista installed. The only drive I received was a Vista Upgrade disc. Fast forward a few months computer slows down, etc so I thought I'd see any control and maybe cleaning the system some. Put my disk to upgrade looking for the way to do it. Make the mistake of installing the upgrade. now I have the upgrade on my computer and it always tells me that I have a version of windows that is not authentic. I tried to use my COA on upgrade drive, does not recognize and COST on the case of my Aspire, once again with the same result. I have my old version under windows.old, but can't seem to install it. I would just go back to my Vista OEM install. I have access to another computer, but it is an Apple and prefer if I didn't use this option unless it makes it easier. I guess what I'm asking, it's just to get back to my legal version on this computer, would like to keep files, but if can't, I would like to do a clean reinstall. Mine is out of warranty, so no help from Best Buy or Acer without paying their

  You are welcome.

  But try first to borrow a Microsoft Vista DVD of an acquantance of work for this restoration instead of a full recovery.

  See you soon.